Password in clear text in the settings personal WiFi hotspot?

Similar Questions

• MacBook pro work leave because of pulled and broken wire.  I took out the hard drive.  the hard drive has all my files that I wouldn't need to clear all of the other personal files?

  MacBook pro work leave because of pulled and broken wire.  I took out the hard drive.  the hard drive has all my files that I wouldn't need to clear all of the other personal files?

  It does not start to the top, screen and hardware ok except belt disconnected.

  also can I sell adapter, brand new, never used. where can I sell?

  Hi Wally, the hard disk OS X and all of your files. Get a case for your reader, and it backs up. Try OWC

  Always keep your Mac backed up on an external drive with Time Machine or utility of cloning like SuperDuperor double clone.

  Try eBay for the adapter.

• Unable to set the ip address of network client hosted after the creation of WIFI hotspot.

  Original title: PROBLEM CONNECTING WITH MY LAPTOP WIFI HOTSPOT INTERNET

  Hi all

  I am able to use the Internet to my hotspot of the Tower, when the source of the internet is Public or private wifi.

  so I know the cmd commands of window for hotspot and the client settings (sharing of customer hosted network, address assignment IP etc.,)

  but the problem I am facing is slightly different

  I use my datacard to cdma wireless broadband as my source internet connection(Reliance netconnect +)

  When I try to create for this hotspot, as usual I am able to create the hotspot and be able to share the internet for hostednework customer.

  but I am unable to set the ip address for the network hosted client, if I try to put 192.169.137.1 and 255.255.255.0 ip

  as soon as I close the window, the IP also disappears

  When connect my android phone to this hotspot, it is able to connect, but there is no internet connectivity.

  When I check the client for transmission of package hostednetwork every two envoys and received packet is past, I mean transmitting

  So what caused the rupture in internet connectivity but success hotspot connectivity?

  check the screenshots...

  can u help me...

  It's a bit complicated

  

  

  

  

  Hi Daniel,.

  Advanced networking issues are supported in the TechNet Forums. I suggest you send the request in the TechNet community.
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking

  Hope this information helps.

• Cannot access the network using WiFi hotspot

  I have a lenovo ideapad z570 running windows 7 ultimate, processor intel pentium cpu B950 @2.10 GHZ 2 GB ram and 64-bit operating system. My problem is that when I create a wifi hotspot via intel my wifi technology, I so can not access the network on my android phone or the playstation 3. There is a sign yellow triangle on the wireless icon and I have the cursor on it, she reads, access to the internet network, unidentified network no internet access. I tried to update all the drivers, I even reinstalled the operating system after a wipe, same result. I tried to use programs such as connectify but same result. Please help me

  Original title: network
  

  There is a sign yellow triangle on the wireless icon and I have the cursor on it, she reads, access to the internet network, unidentified network no internet access. I tried to update all the drivers, I even reinstalled the operating system after a wipe, same result. I tried to use programs such as connectify but same result. Please help me

  Hello

  You try to use the Add-hock network so that you can access ac in android are as good as play station unit
  Like you would have checked in the id network properties material and device id, it yellow list means problem with driver, please try to update the BIOS and the driver appropriate with the hardware ID, if possible to install from the laptop power management

  IdeaPad Z570.please press fn + f5 and check the layout state of WIFI is turned on, current state should off
  Download these drivers and install it, then try again
  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z570/Win7/IN1WLN90WW5.exe

  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z370Z470/IN8STW09WW5.exe
  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z570/Win7/IN1MEI08WW5.exe
  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z570/Win7/IN1CHP30WW5.exe

• The local users and 'Add Member to group' groups function displays the password in clear text

  Hello

  I saw something strange that happens when you add the connected locally to the domain user to a local security group via lusrmgr.msc. This seems to be repeated in our Organization, and I was wondering if it's something to do with our generation, or if it is more widespread? After you have selected the locally connected user (domain) to be added to a local security group, but before confirming with OK / apply, the user name appears in the ACL in the format:

  Domain\username (password@fulldomain)

  The password appears when the user name should be, which is probably just a minor bug where an incorrect value is selected on the screen, but the fact that it is displayed in plain text rather than a hash of password is a little more disconcerting. There seems to be some caveats: it affects only the users in the domain (local users are displayed differently); It is not affected by the local administrator rights (although /are/ to add the user to the local administrator rights); It doesn't affect that the user logged on locally (I can't reproduce as a runas user).

  The steps to reproduce this are:
  (1) start | Run | lusrmgr.msc
  (2) go to the groups. [Any group] | Right-click | Add to group
  3) click on add
  (4) enter the username of the user locally. Ok

  Anyone else see this behavior?

  See you soon,.

  Dines keV

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope this information is useful.

• Clear text after the wrong answer

  Hello
  I am looking for a way to release the text entry box after the user has entered an incorrect answer.
  If this is not possible to do it with text, is it possible to do this with captivate question quiz, or something else?
  
  Thank you
  Aviel miky

  Hi Miky,
  Sorry I wasn't clear. The answer is 'no', with the exception of "Refresh" the film, which will reset all (all objects rating). That is why I proposed the alternative.

  Good day!

• My fonts suddenly changed in Firefox, but not in other browsers. I solved all the duplicated fonts, cleared cache, and the settings in preferences are still on what they should be. What caused this and how can I solve this problem?

  Policies changed in the Firefox browser - not in any other browser.

  You can write a check for corrupted fonts and duplicate and other police issues:

  • http://www.thexlab.com/faqs/multipleappsquit.html - help book 2.0 fonts: looking for damaged fonts
  • http://www.CreativeTechs.com/IQ/garbled_fonts_troubleshooting_guide.html

  You can do a test of fonts to see if you can identify the corrupted fonts.

  • http://BrowserSpy.dk/fonts-Flash.php?detail=1
  • FontInfo: https://addons.mozilla.org/firefox/addon/fontinfo/

• Clone of Windows VM - avoid clear text password of domain registration

  When you use the "Clone, windows with single NIC" in my scheme, it takes a junction station password field.  How can I change this to a SecureString or avoid saving the password of a user in the field in clear text in the workflow?  The goal is to automate the deployment of the VM, setting the variable in the input parameter is not an option.

  Just call this workflow in an another workflow that uses SecureString. You can link to string SecureString - you will get validation warning, but not of error if the workflow will run very well. It is the approach that I took. You can then store the password as a SecureString as an attribute of the Configuration element and that map to your custom workflow.

• How to add lines of text information in the settings?

  Guys,

  I'm trying to customize a few things about Motion 5 and really I was wondering how to add these lines of text in the settings?

  Tried to google it, but without success.

  

  I think you need to learn how * write * FxPlug effects plugins. You cannot add these labels/buttons on the move as it is. What I usually do, is create a platform > pop up widget and use remove the "Snapshot" texts... "(and usually replace it with a series of quadratins (---) to create a line of separation.) To help you, you must have a 'sex' you can show/hide with opacity (and a rig box) which displays the help text.

• Essbase start scrtipt without admin password in plain text

  Hey all,.
  
  I'm sure my system and a final step is the Essbase startup script.
  
  At the present time under its weight:
  
  startEssbase.sh {my_admin_password}
  
  who is not particularly safe.
  
  How can I secure it so that I that either don't have the password in plain text or the password is not passed at all (which normally turns in leading fashion)
  
  Thanks in advance for any help/suggestions

  In the Essbase Administrator's guide, he explains how to hide the password on a Unix server. Click on the link below and look for the following expression, 'hide Essbase server passwords. There is a sample script for secure password.

  http://download.Oracle.com/docs/CD/E12825_01/EPM.111/esb_dbag/frameset.htm?launch.htm

  Good luck!

• How can I text a person with a blackberry? I need to change something in the settings

  I'm not a blackberry phone with my iphone6s... I need to change something in the settings of text

  Hello

  Not if its an apple device, it's an imessage

  If she a Android phone there a sms message

  Swork cheers automatically

  Brian

• Text on the screen is not clear

  I have a new Dell Vista pc runiing. I have a LCD Ultrsharp DEll monitor. ATI @MB graphics card, the resolution is set to 1280 x 1024, everything seems OK, but any text on the screen is not clear. HE's a little fuzzy. How can I fix it?

  Hi Amber321,
   
  How long have you been faced with his problem?
   
  You make changes to the computer until this problem occurred?

  I recommend you set the screen resolution and other settings. To do this follow the link below:
   
  http://windowshelp.Microsoft.com/Windows/en-us/help/617624ee-08f3-4AFF-9713-5e84a9674a261033.mspx
    
  You can also check out the links below:
   
  Ways to improve display quality
   
  http://windowshelp.Microsoft.com/Windows/en-us/help/132c1dab-6da1-47cf-96af-8f00eceaf6f51033.mspx
   
  If the links above do not work, you can check out the link below which will be useful:
   
  Troubleshoot monitor and video card
   
  http://windowshelp.Microsoft.com/Windows/en-us/help/2582c444-448C-4fb5-ba0c-d753f88d64791033.mspx
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• Windows 8 active in the settings of the pc, but showing a gray text on desktop telling me to activate

  I have a windows 8 HP Pavilion laptop computer g6 I bought a few weeks ago. It comes preinstalled with windows 8 and some other software. I have since reinstalled windows 8 on it so that I can get for free any other software that was preinstalled. It's just me, I like a clean install when I first started using a laptop. I activated windows and everything was ok. Yesterday, I remember I have to not activate the automatic updates, so I decided to do a manual for my windows to date with the latest bug fixes and update all. After all has been updated smoothly, restarting the laptop and I see on the lower right a grey message (not a proper notification message) that tells me: "activate Windows. Go to PC settings to activate Windows. ». I right click on my computer > properties and I can clearly see that Windows is activated. Also when I go into computer settings, enable option isn't here, as it is shown in the help screen (F1). How to solve this problem? Any suggestions?

  How to activate Windows 8

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• After re - install, when I "answer" text of the sender is in plain ASCII text format, regardless of the settings.

  I had trouble with Thunderbird, I so re-installed. (Version 38.2.0) I use TB for years, usually with no problems. But this time, after re - install, when I "answer" text of the sender is in plain ASCII text format, regardless of the settings. And plain text is bright blue!

  I want to preserve the HTML format (usual) of e-mail of the sender when I answer. My settings specify the HTML format.

  I don't want to use TB with this "disability" - help! Thank you!

  I don't see where you checked the compositions and the addressing of adjustment to your account. For all accounts also.

• I can't find responsive personal option in the settings of the iPhone 5 s

  I found not reactive staff option in the settings.

  The option to activate and use the Personal Hotspot is carrying load. Your carrier must support it, and your account with them must be enabled. Your account will also require extra charges. You must also have a cellular data plan and turned it on. Check with your operator for more information.