Password reset the role on the same server as Secure Access?

Similar Questions

• Restore the backup with a new name and a different location on the same server

  Hi all
  
  I did a complete backup of my current PROD. Is it possible to restore the database on the same server, but with a different instance name, db_name and on another location?

  PRM says:
  Hi all

  I did a complete backup of my current PROD. Is it possible to restore the database on the same server, but with a different instance name, db_name and on another location?

  If you use RMAN my awnser is not.

  You cannot change the name of the database before open resetlog.

  But you can make this work without problem using the same server.

  You will need to change some parameters.

  Create a PFILE from SPFILE (prod) change parameter 'db_unique_name' file new name (ex TEST).

  Change all the value of PROD TEST except db_name parameter must be PROD.

  CREATE a SPFILE from this PFILE (spfileTEST.ora)
  Create a new password file (orapwTEST)

  So you can start this new Instance_name (TEST).

  Restore the PROD to TEST instance database, you will need use set new name to the file data or database (depends on which version you use)

  Retrieve the instance PROD database (TEST)

  It is time to open resetlogs...
  !!!!!!!!!!!!!!!!!!!!!!!!!!!! ATTENTION HERE!

  You need change redo log location before open resetlogs, you must query v$ logfile member column and change it to another location.

  After change you can open resetlog.

  Now its time to change name of database.

  Stop and start Mount

  Use the NEST

  NEST target=sys/password@instance DBNAME = TEST

  When this process is complete, NEST will be closing database.

  So you will need to start with nmount change db_name to the TEST and reset the parameter 'db_unique_name' (alter system reset db_unique_name)

  Then stop and start upstairs question OPEN DATABASE RESETLOGS and is done.

  HTH,
  Levi Pereira

  Published by: Levi Pereira on August 27, 2012 13:09

• WebDAV: use of the different logins to different WebDAV folders on the same server

  Hello

  I quite often use WebDAV to access the various folders on a server on the Internet. I do this "Add a network location" in Windows Explorer, then using the address https Server (for example https://www.myserver.com/folder1). The first time that I need to enter the credentials of the user and the corresponding password and Windows seems to store them somewhere so that I can connect to this folder also after a re-login without having to re - insert my credentials.

  The question I have, is that I also need access to different folders on the same server (for example https://www.myserver.com/folder2) that requires different user credentials and passwords. The only way I have found is to remove the first network location, disconnect and reconnect to the Windows and then add the new location of the network in Windows Explorer; Just delete the first network location and adding the second network location would not be enough that Windows had always stored the context of the 1st network location and tried to connect with the credentials of the user and the password of the 1st second.

  Question: is there a less cumbersome way to remove context from a WebDAV connection, so that I do not need to disconnect and reconnect if I need to connect to the same server with different user credentials?

  Thank you very much

  Johannes

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• local user name and password if the ACS server fails

  Hello

  I have every router and switch configuration for authentication of the connection via the ACS server.  I used these 12 lines below and it works very well.  Each engineer has their own account.

  AAA new-model
  AAA of default login authentication group Ganymede + activate
  the AAA authentication enable default group Ganymede + activate
  AAA authorization exec default authenticated if
  AAA authorization commands 15 default group Ganymede + authenticated if
  AAA accounting exec default start-stop Ganymede group.
  orders accounting AAA 15 by default start-stop Ganymede group.
  Default connection accounting AAA power Ganymede group.
  AAA - the id of the joint session

  RADIUS-server host x.x.x.x
  RADIUS-server application made
  radius-server key, regardless of

  ----------------------------------------------

  I would add to this a local username and password so that if the ACS server was offline engineers have yet to connect with a knowledge of username and default password

  username privilege 15 secret mypassword MYUSERNAME

  line vty 0 4
  local connection

  Q. How do I make ACS a first preference and connection server only local users username and password if the ACS server is down?

  Kind regards

  Kevin

  Now you have the password to enable as the fall back method:

  AAA of default login authentication group Ganymede + activate

  Change 'enable' for 'local' and the local (to the router) database of user names and passwords is used.

  The same works to activate authentication (the second line "authentication, aaa... ("in the config that you posted).

• Do not ship to the DR server located on the same server as the production.

  Hi all
  
  I have configured DR server on the same server as the production and delivery process and recovery journal has been stopped since the end of DR.
  
  OS = windows 7
  production instance name = test
  DR = drtest instance name
  name of the BD = test
  
  
  Even I created the password with the password for the sys file and renamed it in $ORACLE_HOME/dbs location such as "orapwDRTEST".
  
  Production of database password = orapwTEST filename
  File name of database password = orapwDRTEST DR
  
  
  Had error below at the end of primary school.
  
  
  SQL > select nom_dest, DEST_ID, STATUS, error from v$ archive_dest where dest_id = 2;
  
  NOM_DEST
  -------------------------------------------------------------------------------
  
  STATUS OF DEST_ID
  ---------- ---------
  ERROR
  -----------------------------------------------------------------
  LOG_ARCHIVE_DEST_2
  * ERROR 2 *.
  ORA-01031: insufficient privileges
  
  
  
  Please help me where I am missing and led to this error...
  
  
  Kind regards
  VAMSi...

  As your operating system is Windows password file must be present in below mentioned main servers and backup location.

  D:\oracle\product\11.2.0\dbhome_1\database

  Not in

  D:\oracle\product\11.2.0\dbhome_1\dbs

  Also check this

  http://www.adp-GmbH.ch/ora/Admin/password_file.html

• Replication of Golden gate on the same server

  Hello
  
  What I need to do to replicate a table from a source database to a database of target on the same server. Here are my settings files
  
  
  excerpt from load1
  ggs_owner username, password ggs_owner
  rmthost < servername > .ca, mgrport 7576
  rmttask replicat group load2
  table gsdba.mytesttable;
  
  
  replicat load2
  ggs_owner username, password ggs_owner
  assumetargetdefs
  map gsdba.mytesttable, target gsdba.mytesttable;
  
  port 7576
  ggs_owner username, password ggs_owner
  purgeoldextracts/t01/software/gg/dirdat
  
  With this configuration, the data are reloaded in the source table :-(
  
  Thank you

  Hello

  Please mark the thread as solved & closed if you do not yet matter.

  1. how to stop excerpt/replicate?

  kill extracted GroupName
  kill replicat GroupName

  2. how to remove extracat / replicat

  remove the extract GroupName [!]
  Remove replicat GroupName [!]

  3. how to clean-up (first stop)

  cleaning extract GroupName
  cleaning replicat GroupName

  GG documentation is here:

  http://download.Oracle.com/docs/CD/E18101_01/index.htm

  I guess you must

  1. stop the extract/replicat if can't stop it kill
  2. cleaning after arrested or killed
  3. delete

  Kind regards

• Newbie: Mobile Server and Oracle DB must be on the same server?

  Hello Forum...
  
  I have problems to install the mobile server (ver. 10.3.0.2.0).
  
  First of all, I tried to install within an instance of the OAS (ver. 10.1.3.0.0) - I could not set the password of the mobile server oc4j account in enterprise manager server application and is stuck there. Also, I couldn't connect to webtogo as mobile server administrator.
  
  Second, I have installed the version of stand-alone mobile server, but when I run the 'runmobileserver.bat' I get the following error:
  
  09/08/22 12:54:21 log9: connect as: MOBILEADMIN
  09/08/22 12:54:21 log9: Mobile Server ID not found, impossible to register.
  09/08/22 12:54:21 log9: java.sql.SQLException: ORA-00942: table or view does not exist
  
  Like the previous time, I couldn't connect to the webtogo as mobile server administrator. [OS: windows 2003 Enterprise in both cases]
  
  I was informed by my dba that Oracle mobileserver will work only if it is installed on the same server as the backend database. Is this true?
  
  Thank you
  j - p.

  Hi J - P,

  When you installed the mobile server in stand-alone mode, repwizard was not performed or has failed.
  Try to rerun repwizard with: $ORACLE_HOME/mobile/server/admin/repwizard
  You can check the log file in $ORACLE_HOME/mobile/server/repository.log to see if there is a critical error,
  the repwizard should save your mobile server, you can consult this table: mobileadmin.mobileserver_instances so you can see your host name and port.

  On the Mobile Server OAS installation, you should not need to use the oc4jadmin password as if you installed OAS 10.1.3 and run the runinstaller lite Oracle to install Oracle lite 10.3.0.2. in the same ORACLE_HOME with run of the OAS, it should automatically deployed the mobile server j2ee application in the OAS.

  Kind regards.
  Marc
  PS: To change the OC4JADMIN password you can use the note: Note.460314.1 Ext/Pub cannot establish a connection with OC4J instance mobileserver on application server

• HP HP Device Manager Device Manager: multiple active gateways on the same server - possible?

  Hello

  Is this possible? We have 2 different offices on different subnets, but I can tell it is only possible to have an active local gateway at a time?

  I know that I can install a gateway HPDM in each office, but if I could avoid it, it would be preferable.

  Hello

  HPDM uses MAC of the server host as the ID gateway (which must be unique), is not possible you have two gateways installed on the same server host - Agent DM is not able to find out who will speak with.

• the best practice is implemented Server Exchange and the domain controller in the same server

  the best practice is implemented in exchange server and the domain controller in the same server or
  put on another server

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:
  http://social.technet.Microsoft.com/forums

• Migrate the file server between domains in the same server, I need to do?

  I need to know the steps to migrate between areas without movingdata diferents fileserver will be because in the same server. I have found no support document, or someone who did share their experiences, I onlyfound for information on how to migrate a file server between domains but mobile from one server to another with the WSTF tool. -

  The information of my it environment is based on Windows 2008 R2 with the domain Active Directory forest root, with Exchange 2010 and Lync Server 2010.
  Thanks for any help. See you soon. Good bye.
  Kind regards
  Diego Alonso.

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Possible to install UCCE on the same server as CallManager MCS

  Hello

  Trying to set up improved 4.5 on an MCS 7835 UCCE. Now, if I want to install CallManager 5.1 in this environment, can I put the same box of MCS? Or do I have to buy an another MCS?

  Thanks in advance.

  Juan, I think that you misread his post.

  "If I changed CallManager express to 4.2 then it would be possible to run on the same server MCS?

  I don't think that he meant "CallManager express."

  The solution, lpezi, is to read the compatibility matrix where all your questions are answered.

  http://www.Cisco.com/univercd/CC/TD/doc/product/voice/sw_ap_to/crscomtx.PDF

  Kind regards

  Geoff

• Use the UPD in different Versions on the same server

  Hello

  We're about to update some things on our print server (eg. name, queue) and want to upgrade the driver as well. A week to use two different versions of the UPD, at the same time on the same server.

  Is it possible or will that get us in trouble?

  I would recommend this ad in the Forums of HP Enterprise Support for better coverage, given that this may happen there anymore, it's here on the forums of consumers.

  You can access support at the following link enterprise forums.

  http://h30499.www3.HP.com/

• ASIC can run on the same server/db like EBS (R12.1)

  Hello

  We have an EBS (R12.1) environment and intend to use the CPSA. I've seen environments where the CAWC runs in its own environment/database, etc. and connects to an instance of the EBS. Which is the only type of available configuration or can CAWC run fully within an environment of EBS/instance on the same server? If so, what are the consequences of such a configuration, for example on the performance.

  Thank you

  NAT.

  Hi Nat,

  ASIC can be configured in two ways:

  1 centralized - where the EBS and VCP reside on the same application server.

  2 decentralized - where the EBS and CRS are on two different application servers.

  Basically the motor nucleus of CPSA of planning does all the planning in the memory of the application server (and not in the database). This planning process is highly require a lot of resources (memory) and requires a huge memory (according to the data, the type of plan and many other factors). If the application servers are not the right size, this led to the poor performance of the application. And if both the planning and EBS reside on the same server, there are possibilities that you slow the global treatment through the functions of the company. That's why decentralized architecture is preferred, where the planning process running on another remote computer of your EBS and it didn't there in not affecting transactional modules.

  Beyond that, you have the ease of maintenance in terms of correction, update, addition of multiple of VCP modules, if you're on a decentralised architecture.

  Centralized architecture is also not rare. Many companies run their planning and EBS on a single machine.

  I hope that the above gives you a point of view, using which you can choose what suits your business best!

  Kind regards

  Mohan Balaji

• Can I make a password reset the flash drive to reset the password on my computer dell laptop?

  OT: reset password

  can I make a password reset the flash drive to reset the password on my computer dell laptop?

  Yes here's how:

  http://www.Dummies.com/how-to/content/how-to-create-a-password-reset-disk-for-Windows-81.html

• Duplicated on the same server database

  Hi, I'm trying to replicate a database on the same server. It seems to have worked, but I get a lot of error messages in the log of alerts. Please can someone tell if I'm doing something wrong or that I don't need to worry about these messages. Here's what I do:

  Taking rman backup archivelog and proddb database

  Do pfile from spfile proddb

  create directories by replacing the name proddb by clonedb

  copy the proddbinit.ora file rename to replace all references to proddb with clonedb of clonedbinit.ora

  Add 2 entries to clonedbinit.ora:

  * .db_file_name_convert = 'PRODDB', 'CLONEDB '.

  * .log_file_name_convert = 'PRODDB', 'CLONEDB '.

  Instance defined in CLONEDB and startup nomount

  Sign in to rman - rman AUXILIARY.

  DUPLICATE TO CLONEDB DATABASE

  BACKUP LOCATION ' / U01/PRODDB.

  I haven't specified a SPFILE because I don't think I need one as I created a complete pfile file

  "When I look in the alerts log, I get a message saying load ' ORA-01565: could not open the Spfile" and error in the identification of file & apos spfileclonedb.ora & apos;

  I read if you clone to a database on the same server, you must manually create your own pfile and do not use the SPFILE option during replication.

  What I am doing wrong?

  Thank you very much

  Adam

  I think your spfile has no parameter value:

  db_file_name_convert ='/ EOYFIN/TESTP / ',' / FMWSPRT/TESTS /'

  To ensure that:

  create pfile from spfile;

  then check your pfile file to see the entrance is there or not.

  Option 1

  -----------------

  Just add that then you can do it in duplicate using the set command order

  -----------------------------------------------

  Run {}

  allocate channel pr1 type disk;

  allocate channel pr2 type disk;

  allocate auxiliary channel stdby type disk;

  current spfile database of target duplicate database tests

  :

  :

  Set db_file_name_convert ='/ EOYFIN/TESTP / ',' / FMWSPRT/TESTS /'

  Set log_file_name_convert ='/ EOYFIN/TESTP / ',' / FMWSPRT/TESTS /'

  :

  ;

  }

  Option 2

  ------------------------

  If it not is not for this put entry pfile.

  Start the databases using pfile and then create spfile;

  SPFile to start;

  Try again

  See you soon

  M