Password Tecra S1 and HARD drive?
Can someone help how to set the HARD disk for Tecra S1 laptop password?
Commercial brochure/card has this feature and the manual, he mentioned a program called HDDPWM which should be in the "Windows utility" but I have not found.
Thank you.
Hello
Do you use recovery toshiba OS (or the preinstalled) or the that you have installed your own installation?
You can also watch the CD tools & Utlities and watch if the HDDPWM (disc HARD Passwrd Manager) is available. Otherwise, you can also consult
https://EU.computers.Toshiba-Europe.com driver & downloads
for this tool.
Rudi Bye
Tags: Toshiba
Similar Questions
-
Find bookmarks and passwords on the old hard drive
I watched an attempt all suggestions re. This and cannot locate my favorites and passwords on the old hard drive.
Hard drive is still connected to my computer, even if the PC had a mother brd, the CPU and the RAM upgrade: because of the upgrade failed to load window, if the Windows file is always available. New HARD drive with windows installed, install again. 11.0 ff. The following search suggestions, I find the new profile, but not that of the old drive. I can access my Mozilla folder in Program Files (x 86), but are now looking for appdata etc.
Yes, I know, it was really stupid to not save this kind of things before the installation of new equipment, but do not think that the material change was hose go my W7 install so bad. Thanks for any help in advance.AppData is a hidden file, you need to enable hidden files and folders may be to find. http://www.bleepingcomputer.com/tutorials/how-to-see-hidden-files-in-windows/.
After finding the appdata folder, read https://support.mozilla.org/en-US/kb/Managing-profiles and recovery of data from an old profile.
-
Password protect an external hard drive connected to Time Capsule
I have a WD passport external hard drive connected to my time capsule, so my wife and I can easily share files. I have the external hard drive connected through the locked time capsules WiFi network so someone in the House can not access however if they walked the time capsule and not plugged in the external hard drive they could walk away with it. When I try to password protect external hard drive then time capsule may not recognise, and so I can't use it as an external hard drive that is shared. No one knows how, to password protect the external hard drive connected to the time capsule as if someone physically stole the external hard drive it would be locked, but have yet still recognizable by Time Capsule when I plugged?
Hope that makes sense.
The only way to do is to encrypt the files on the computer.
And you both use the same password. Unfortunately, this probably means that you can not share files directly... The TC is not a SIN... never, it was designed for this purpose so there no controls to help admin file sharing.
If you create a DMG file on WD drive that encrypt you and you can copy files to and from... but only one at a time.
Another method would be to use a specific software... Watch chronosync.
http://www.econtechnologies.com/Chronosync/guide-sync-with-disk-image.html
I don't him have not run in this configuration... so, you have to experiment if it manages what you want.
I think that there will always be limitations on concurrent access from multiple computers.
-
How to reset the password forgotten on external HARD drive
Hello
I forgot the password of my external hard drive.
How can I reset this?It has all my photos out there I want to come back.
The external HARD drive comes with software that the password. Have you used this software?
I m not very well what HARD drive you have exactly, but in the case of the password disk HARD unknown could be deleted, so I guess that by using such software.
But I'm afraid, this is not possible and if yes, then secure files could serve more than m.
I say it in a different way: password protection would be useless if you can remove any unknown or forgotten password. Don't you think?
-
forgot password for acsess my hard drive on my acer computor
Original title: password
I forgot password for acsess my hard drive on my acer computor
What to do if you forget your Windows passwordIf you have forgotten your Windows password and you are on a domain, you must contact your system administrator to reset your password. If you are not on a domain, you can reset your password by using a reset disk of password or by using an administrator account. For more information, see create a password reset disk or reset your Windows password.
If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to connect to Windows and you will need to re - install Windows.
Reset password
If you have forgotten your password, you can reset it using a disc to reset password for your user account (or the password reset information stored on a USB flash drive). If you don't have a password reset disk, you'll need to get someone with an administrator account on the computer to reset your password for you.
NoteIf an administrator resets your password, you may lose access to some of your files. For more information, see What are the risks of resetting a password?
If you enter the wrong password when you attempt to log on, Windows displays a message that the password is incorrect. Click OK to close the message.
Click Reset password, and then insert your password reset disk or USB key.
Follow the steps in the password reset Wizard to create a new password.
Login with the new password. If you forget your password again, you can use the same password reset disk. You don't need to make a new.
To learn how to change your password, see change your Windows password. For more information about storing password reset information, see create a password reset disk.
http://Windows.Microsoft.com/en-us/Windows7/reset-your-Windows-password
-
A1103 new Ram and HARD drive will not start
Hello.
I have a Mac mini A1103. When I got there the folder flashing with question mark. I got a macbook earlier where this problem was solved by installing a new hard drive. so I ordered a new 160 GB IDE 2.5 "5400 RPM and 1 GB Corsair Valueselect DDR1 333 MHz hoping that this will help me get the mini running and preforming a little better with 512 MB of Ram.
When I boot the mini after swapping ram and hard drive I always see the same flashing folder. I can reset the NVRAM Boot, enter diskmode target? (I think) and the Boot Manager.
When I enter the Boot Manager I can see the following screen
a few times I get to this screen for Open Firmware screen where I can use certain commands such as vram-reset reset-all rebot and so, but sometimes I'm just stuck on this screen.
Anyone have any suggestions on what is wrong and what I can try next? I do not have the boot original dvd but I have a usb bootable with IOS 10.6 and a dvd with IOS 10.6 (not original) but I can't get botting from any of the devices.
A Mac Mini A1103 has a G4 Power PC processor and cannot be greater than 10.5.8. Superior OSX versions require an Intel processor.
In this statement "a usb bootable with IOS 10.6 and a dvd with IOS 10.6 (not original)" I think you mean OSX, not of iOS. You must obtain a copy of the original installation disc which was 10.3 or 10.4 or disk to upgrade to 10.4 or 10.5 full retail. Coverall A1103 all three 2005 models of the Mac Mini G4.
You cannot use a grey disc unless it was delivered with your specific Mac. Native gray disc with Macs and can not e used on the other model of disc.
You can probably call Apple and order a copy of the original disks
-
23 - f270: RAM and hard drive one device?
Hello
I had recently a hard drive has failed/bad in my computer that was just out of warranty, so I took my computer to a computer repair man who said he could replace the old/bad disk with a new one. This man didn't really hold up to the end of his contract, and now I find myself in a dispute with him as he always has my HP PC and he gave me a lesser Dell as if to replace. Now, I contacted the office busniness better for resolving this dispute. But it is now trying to claim that he gave me the HP drive hard and RAM unit. This man gave me was a rectangular metal box telling me that it was the old bad hard drive. So what I need to know is are the hard drive and RAM in this a model room? I need proof that if the RAM is not present, he was the one who pulled it and sold it. They only gave me one of the components of the computer, and I would like to know if the RAM and hard drive are one or two pieces of sepearte?
Thank you
Hello
RAM and hard drive (HDD) are two different things. Your machine has 6 GB of RAM, which means it has 2 sticks, and 1 TB of HDD (1 unit). His record:
http://support.HP.com/us-en/document/c03801226
Kind regards.
-
Satellite C660 - compatibility between motherboard and hard drive internal
Hi, I have a problem with the compatibility between the internal (1 terabyte) hard drive and installing windows 7 pro.
I broke my old internal hard drive (320 GB) and I bought the new hd (1 tb), but during the installation it says that w7 cannot be installed on this new hard drive.Can my pc motherboard (serial number: 3B071014k) support the new hard drive (serial number: wd10jpvx)?
and if the answer is 'yes', how can I make it work?First of all the question has nothing to do with the motherboard and HARD drive compatibility.
If the HARD drive is visible in the BIOS (first page), the HARD drive is supported by the BIOS and HARD disk controller.
In the case where the drive HARD isn't recognized, you will need to replace this HARD drive with another. I guess the smaller size of the 2.5 SATA HDD THAT would be taken in charge (500 GB)However, in case the HARD disk is visible in the BIOS, you should be able to install Windows 7.
Before starting the installation, you must format the HARD drive and should create the system partition.
For this procedure, I recommend to use some tools such as partitions for example: GParted
GParted is a freeware Linux tool.
You can create a bootable USB key in order to start the device using GParted:
http://gparted.sourceforge.NET/LiveCD.phpThen, you should be able to format the HARD disk and create partitions.
-
Satellite L70-A-139 - guaranteed zero when removing the cover for the RAM and HARD drive
Hi all
I have a Satellite L70-A-139 youcef.
And at the back of the laptop, there is a cover that is fixed with a screw.Wil I void the warranty when I unscrew and take a look?
I want to upgrade my HDD to SSD.
The motherboard supports Sata III: D.Thank you!
No, the mandate must still be valid.
There is a removable cover at the bottom of the unit as shown here:
[Toshiba Satellite C70 / C75 / C70D / C75D / L70 / L70t / S70 / HARD S70t drive replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm]Then you should be able to upgrade the RAM and HARD drive.
I think this info should be mentioned in the user manual too. -
HP touchsmart 300-120: the replacement and hard drive and memory
Hello
I get the error message "bootmrg is missing. I have tried everything to solve this problem and finally told me that I needed to replace the hard drive. Since I have to replace it, I want to upgrade. I would like to know what the greatest memory and hard drive, I can go for this model... HP TouchSmart 300-1020.
Thank you
Good to hear that diagnosis proved to be positive. You just saved yourself some time and money.
-
Satellite A50: Question about type RAM and HARD drive
Anyone out there who would try to open their laptop Toshiba Satellite A50, what type of RAM and hard disk of brand you all have inside?
All the portable toshiba comes with Toshiba RAM and hard drive?Hello
As far as I know the Satellite A50 uses DDR PC2700 modules. These modules must be compatible:
PC2700 256 MB (PA3311U - 1 M 25)
PC2700 512 MB (PA3312U - 1 M 51)
1024MO PC2700 (PA3313U-1M1G)There are different models of Satellite A50, but I think that there should be a drive HARD IDE(ATA-6) 60 GB 4200 RPM with 8 MB buffer size.
Here is all the information I found.
-
need a laptop keyboard and hard drive HP product number
Hi all!!!
My laptop keyboard and hard drive does not properly and I need to replace the two points. but I do not know the exact number of the product of the keyboard and the disk hard drive. A knowledge of the product number please help me.
Product model: HP Pavilion g6 - 1011TU Notebook
Product number: LQ893PA
Thank you
Migas
You will find figures for the product here in the service of maintenance & guide for the laptop G6. As far the hard drive will I highly recommend that you use SATA instead of SATA2 or SATA3 for the best compatibility with the interface of disk on the system board controller.
-
SL 410 Upgrade ram and hard drive
Hi all
I have been using the 410-2842-rk1 model Lenovo thinkpad SL for a year and a half.
No problems until now
I want to upgrade the RAM and hard drive of this machine.
At the time of purchase, I had seen that I could improve up to 1 TB of hard drive.
Please guide me if I can or not.
About the RAm too, I need assistance (maximum limit I can update)
Thanks in advance...
You can switch to a 1 TB HDD providing it will fit physically. They are more hard are 9.5 mm thick but some hard drives of 1 TB are 12.5 mm thick. If you get a 9.5 mm HARD drive then it will work. Readers of 12.5 mm is too thick to fit.
Regarding the RAM, you can install up to 8 GB of RAM, which is 2 x 4 GB.
-
Envy 15 t: upgrade memory and hard drive HP ENVY 15t
Hi guys, I just bought the HP Envy 15 not touch t (ae100) with the following characteristics:
-CPU & graphics: 6th generation Intel Core i7-6700HQ Quad Core processor + Intel HD Graphics 530
-Memory: 8 GB DDR3L - 1 DIMM
-Hard drive: 1 TB 5400 RPM hard drive
I have a few questions about it. First of all, my laptop doesn't have a vacant unit of m2 where I can insert an SSD and if not a SATA 3 2.5-inch SSD fits instead of the hard disk without additional fixing or need support.
Second, is there an empty memory slot to insert a 8 GB of additional ram.
Any kind of assistance will be extremely useful and thanks in advance.
No crack m2. From the Manual:
Only dedicated support of storage SATA m2 (Port 0) (models with i7 processors and 4 GB memory graphics)
So if you have Intel HD video only you do not have a slot m2.
Here's the manual for your use:
Yes on the memory 8 GB 2d module:
Both not accessible/upgradable module DDR3L-1600 slots double channel memory support 16 GB of RAM in the following conƭgurations ● 16384-Mo (8192 MB × 2)
Access to the memory and hard drive are obtained by removing the lower cover. Technically this is not allowed to the end user if security is jeopardized.
A standard 2.5 inch SATA SSD to integrate perfectly in the original hardware for hard disk 5400 RPM. It is a highly recommended update. The 16 GB of RAM not so much, but it's one of those things "might as well" If you are determined to go there.
Let us know if you need more information.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?
Hi KevinRy,
Welcome to the Microsoft Answers site!
Unplug all external devices.
Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.
Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:
1.
Right-click my computerand then click Properties.
2.
Click the Advanced tab.
3.
Under Startup and recovery, click settings to open the Startup and recovery dialog box.
4.
Clear the automatically restart check box, and then click OK many times necessary.
5.
Restart your computer so that the settings take effect.
Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.
Please reply back with the error message you get because it helps us to resolve the error.
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
How can I permanently disable obsolete warnings because I'm stuck with the old machine, I
I'm stuck with OS 10.4 and can't update Firefox or plug-ins all further. Get - again and again! -caveat by Firefox. How can I disable those permanently?
-
Cannot restore the system using CD Toshiba
I have a damaged serial port. It is disconnected/drawn / deleted my BIOS. When you restore from cd win98, starts in safe mode. serial port causes this. If I once more turn it off and start the computer normally, it boots OK BUT then goes in systemati
-
ReadyDATA auto-créer directories
ReadyDATA 5200 has the ability to auto-créer shares of home for the users of the AD as does the line of ReadNAS? I find anywhere a framework for this.
-
Unable to communicate with the printer
Installed el capitan on my iMac, and now he can not comminicate with printer. Why?
-
Error-1967362041, DSC module, read the historical traces
Hello. I'm reading some historical traces, but I get error-1967362041 and the message: HIST_ReadNumericTraceCORE.VI, \\hostname\library\Variable: IAK_SHARED: (Hex 0x8ABC7007) out of reach. This happens when using VI server to run my remote applicatio