Similar Questions

• copy and paste in iOS on iPhone 10 6

  Copy / paste is not consistent. I have to turn the phone off and restart in order to copy and paste into the Pages and the copy of the mail, for example pages.

  The copy and paste can be restored Pages?

  I do not use Pages, so I can't comment on that. But if a reboot seems to fix, it may be something anyone able to help out.

• Past record

  Hello

  I am trying to go to the record, that I found myself

  in a trigger when-box-changed, I wrote this

  ON THE OTHER

  REC_NO: = TO_NUMBER(:SYSTEM.) TRIGGER_RECORD);

  N: =: ALL_ADMITTED_PATIENT. NB;

  : ALL_ADMITTED_PATIENT. NUM: = ";

  GO_BLOCK ('ALL_ADMITTED_PATIENT');

  PREMIER_ENREGISTREMENT;

  LOOP

  IF: ALL_ADMITTED_PATIENT. NUM > N

  THEN

  : ALL_ADMITTED_PATIENT. NUM: =: ALL_ADMITTED_PATIENT. NUM - 1;

  END IF;

  NEXT_RECORD;

  WHEN THE OUTPUT: SYSTEM. LAST_RECORD = "TRUE";

  END LOOP;

  MESSAGE (REC_NO);

  MESSAGE (REC_NO);

  GO_RECORD (REC_NO);

  -rec_no is a variable

  and the message integrated messages the well rec_no

  ??

  I found it, thank you,

  the problem is that there is a rest of the code after "go_record".

  : NUMBERS_BLOCK. NUMBERS: =: NUMBERS_BLOCK. NUMBERS - 1;

  GO_BLOCK ('ALL_ADMITTED_PATIENT');

  PREMIER_ENREGISTREMENT;

  LOOP

  IF: ALL_ADMITTED_PATIENT. NUM =: NUMBERS_BLOCK. NUMBERS OF

  	THEN
  	: NUMBERS_BLOCK. NUMBERS: =: NUMBERS_BLOCK. NUMBERS + 1;

  END IF;

  NEXT_RECORD;

  WHEN THE OUTPUT: SYSTEM. LAST_RECORD = "TRUE";

  END LOOP;

  END IF;

  so he did, but once he did, he executed the rest of the code that goes to the last record.

  I added it at the end of the code

  Thank you

• Unable to get the total number of records processed by the processor of trade rules

  Details of the environment

  ======================

  Disqualification Version: 12.1.3.0.0

  
  

  I use a business rules processor to implement multiple business rules on one record and I am looking for a summary of the number of records increased and does not have a specific rule.

  
  To illustrate:
  Suppose there are 2 rules, invalid number in Column1 and valid number on Column2.
  10 records to process and 3 folders don't rule 1 (valid on column1) and 9 entered failure of rule 2 (valid number on Column2).

  In the browser of result of the processor Business, the number of past records and failed is displayed but is not part of the output of the processor itself. In the example above, there will be 1 pass and 9 fail records and given the values of said the total number of records can be derived which is 10.

  This is why the expected output will be:
  Success of failure
  Rule 1:7 (10-3) 3
  Rule 2: 1 (10-1) 9
  Note: The number of records that failed can be derived from the table of the rule ID but I don't know how to get the total number of records in order to calculate the number of records that a given rule.

  I tried to publish the County of acceptance and rejection in the browser of result of the processor Business in an intermediate table and ask the same intermediate table to get the pass and fail values but Disqualification does not allow to write and read the same intermediary object in a single process. What is the best way to get the number of records total handled by the processor business rules? This kind of attributes (that do not exist only in the browser of result) can be included in the output of the processor in the next version of the Disqualification?

  In addition, the intermediate table contains only 1 sheet with pass and failure values while the exceptions which have individual failure on each rule contains 12 Archives. What would be the best approach to merge a single record into multiple records according to the example below?

  Staging table
  Success of failure
  1 9

  Exception table
  Single ID ID rule
  Rule 1 Record1
  Rule 1 Record2
  Rule 1 record Record3
  Rule 2 Record1

  Exception table with: staging Table data merge
  Rule ID ID Unique Pass Fail Total
  Rule 1 1 9 10 Record1
  Rule 1 1 9 10 Record2
  Recording rule 1 Record3 1 9 10
  Record1 rule 2 1 9 10
  
  Please notify.

  Hi Jason,

  The best way to explain how to do this is with an example project (DXI). I'll send you one in offline mode.

  -Mike

• Record Collection Count = 1, but Exists is return false?

  Hi all
  
  OracleDB: 10g
  
  I have a record collection that I use to store information in a stored procedure. Before you do any work with it, I check if there is data in the file (. l_tab_cost_rec EXISTS (1)).
  
  What is strange, it's l_tab_cost_rec. Exists (1) returns false, but l_tab_cost_rec. Count returns a count = 1?
  
  Why East-Exists returns false, but the count is up to 1?
  
  Record definition:
  
  Type_cost_rec RECORD TYPE IS
  (item_id NUMBER
  item_cost NUMBER
  org_id NUMBER
  );
  
  TYPE tab_cost_rec IS TABLE OF type_cost_rec INDEX DIRECTORY.
  
  l_tab_cost_rec tab_cost_rec;

  How you assign the values in your table?

  It is quite possible to paste records into an associative array by index random, so your table may not have anything for the index of 1 (your_array (1)), but there might be something in the second index (your_array) (2). The number will always be 1.

• How can I connect to a wifi network when I get the message 'safety recommendation' when I try to join?

  I have problems connecting to the WiFi at the hotel, as I have upgraded to iOS 10. When I try to join, I get a message "safety recommendation", and then it does nothing else. Prior to the update of the iOS, it would open an another Popup screen that lets me enter the password for the hotel but is not past with iOS 10. How do go?

  Please read use captives Wi - Fi networks on your iPhone, iPad or iPod touch - Apple Support.

  You may need to deselect Auto-Join and/or auto-connect on some networks in captivity. Otherwise, it may seem to connect for a second or two, only to disconnect immediately, leaving you without the possibility to open a session.

• Lost bookmarks and passwords

  I have windows xp on my system and kept getting the blue screen of death, so I had to reinstall the operating system.
  I went in the region that stores the records firefox and thunderbird and saved on another drive.
  I reinstalled windows and then transferred the two files above and thunderbird works fine it has all my data, but my firefox is having issues

  The record shows all the profiles I have but when I open firefox it does not show my words of past recorded or bookmarks, it shows only the default bookmarks

  I can't find my password or the Favorites anywhere.

  They should be in my profile folder, but they are not there. Any suggestion where they are? or have they not been saved in the firefox folder where is required profile?

  Its ok, thought about it, he kept the substitution of the file with the default password.
  I created a new profile and pasted in, works now

  Bit confused, but at least something not lost anything

• Simple management requires ID for HP Forum

  How can I change or delete the simple pass codes? For example, I forgot my ID Forum from HP, if I had to guess several times before you find one that suits. Each time, simple past recorded a login name. Now when I want to open a session, I have to go through more than one connected until I hit the right one. These incorrect must be deleted, but I can't find any way to do it.

  This is also Support Simple to move from HP, case document:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c02518653&JumpID=reg_R1002_USEN

• Cisco Aironet 1262N stuck during the startup process

  I'm banging my head against the wall, trying to figure out why my AIR-AP1262N-A-K9 will start all the way. He'll get all the way to initiate interfaces and stop. I can never get to control the CLI. This is my first time with a cisco ap but everything I read it very easy sewing.

  This unit from what I understand will work on its own with no controller. Therefore, it is called a "stand-alone" model Yet he seems to be looking for something to complete during the boot. Below the out put for starting. The last line is where it stops.

  If anyone can help me I would be very happy.

  WRDTR, CLKTR r: 0x8200083f 0x40000000
  r RQDC, RFDC: 0 x 80000033 0 x 00000212

  using the values from the eeprom

  WRDTR, CLKTR: 0X8200083F 0X40000000
  RQDC, RFDC: 0 X 80000033 0 X 00000212

  MCNG ddr static values of the eeprom series
  init done DDR

  IOS Bootloader - start System.
  Flash CHIP: Numonyx P33
  Check for more deleted blocks
  ................................................................................
  ................................................................................
  ................................................................................
  ......
  XMODEM file system is available.

  DDR used values of the system serial eeprom.
  WRDTR, CLKTR: 0X8200083F, 0X40000000
  RQDC, RFDC: 0 X 80000033, 0 X 00000212

  PCIE0: the connection is established.
  PCIE0: VC0 is active
  PCIE1: the connection is established.
  PCIE1: VC0 is active
  PCIE 64-bit devices
  PCIEx: initialization done
  flashfs [0]: 147 files, 7 folders
  flashfs [0]: 0 orphaned files, orphaned directories 0
  flashfs [0]: Total number of bytes: 31739904
  flashfs [0]: bytes used: 6435328
  flashfs [0]: available bytes: 25304576
  flashfs [0]: flashfs fsck took 9 seconds.
  The system eeprom read cookie series... Fact
  MAC Ethernet address of base: 7 c: ad: 74:93:36:ba
  Waiting for auto-negotiation complete PHY... TIME-OUT!
  Ethernet link is down.
  Error: Speed RGMII

  The system has encountered an error during initialization
  the Ethernet port.
  The system is ignoring the error and continue to start.
  If you stop the system startup process, what follows
  orders will be re - initialize Ethernet, TFTP and finishing
  loading the operating system software:

  ether_init
  tftp_init
  boot

  for 22 seconds
  process_config_recovery: set the IP address and the default config 10.0.0.1
  process_config_recovery: image recovery

  PA:
  WRDTR, CLKTR r: 0x8200083f 0x40000000
  r RQDC, RFDC: 0 x 80000033 0 x 00000212

  using the values from the eeprom

  WRDTR, CLKTR: 0X8200083F 0X40000000
  RQDC, RFDC: 0 X 80000033 0 X 00000212

  MCNG ddr static values of the eeprom series
  init done DDR

  Normal running Memtest...
  Past.
  IOS Bootloader - start System.
  Flash CHIP: Numonyx P33
  Check for more deleted blocks
  ................................................................................
  ................................................................................
  ................................................................................
  ......
  XMODEM file system is available.

  DDR used values of the system serial eeprom.
  WRDTR, CLKTR: 0X8200083F, 0X40000000
  RQDC, RFDC: 0 X 80000033, 0 X 00000212

  PCIE0: the connection is established.
  PCIE0: VC0 is active
  PCIE1: the connection is established.
  PCIE1: VC0 is active
  PCIE 64-bit devices
  PCIEx: initialization done
  flashfs [0]: 147 files, 7 folders
  flashfs [0]: 0 orphaned files, orphaned directories 0
  flashfs [0]: Total number of bytes: 31739904
  flashfs [0]: bytes used: 6435328
  flashfs [0]: available bytes: 25304576
  flashfs [0]: flashfs fsck took 9 seconds.
  The system eeprom read cookie series... Fact
  MAC Ethernet address of base: 7 c: ad: 74:93:36:ba
  Waiting for auto-negotiation complete PHY... TIME-OUT!
  Ethernet link is down.
  Error: Speed RGMII

  The system has encountered an error during initialization
  the Ethernet port.
  The system is ignoring the error and continue to start.
  If you stop the system startup process, what follows
  orders will be re - initialize Ethernet, TFTP and finishing
  loading the operating system software:

  ether_init
  tftp_init
  boot

  "Loading Flash:/ap3g1-k9w7-mx.124-25d.JA1/ap3g1-k9w7-mx.124-25d.JA1"...### ".
  ################################################################################
  ################################################################################
  ################################################################################
  ################################################################################
  ################################################################################
  ###############################################################################

  File "flash:/ap3g1-k9w7-mx.124-25d.JA1/ap3g1-k9w7-mx.124-25d.JA1" uncompressed one
  ND installed, point of entry: 0x4000
  execution of...
  ENET stopped

  Legend restricted rights

  Use, duplication, or disclosure by the Government is
  subject to such restrictions as set out in paragraph
  (c) Commercial - limited computer software
  The rights to FAR clause 52.227 - 19 and subparagraph s
  (c) (1) (ii) rights to technical and computer data
  Clause of DFARS 252.227 - 7013 section software.

  Cisco Systems, Inc.
  170 West Tasman Drive
  San Jose, California 95134-1706

  Software Cisco IOS, C1260 Software (AP3G1-K9W7-M), Version 12.4 (25 d) JA1, COMMUNICATED
  SOFTWARE (fc1)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2011 by Cisco Systems, Inc.
  Updated Friday, August 11, 11 02:07 by prod_rel_team

  Proceed with the initialization of the system

  Proceeding to unmask interrupts
  Initialization of flashfs...
  Flash CHIP: Numonyx P33
  Check for more deleted blocks
  ................................................................................
  ................................................................................
  ................................................................................
  ......

  flashfs [1]: 147 files, 7 folders
  flashfs [1]: 0 orphaned files, orphaned directories 0
  flashfs [1]: Total number of bytes: 31481856
  flashfs [1]: bytes used: 6435328
  flashfs [1]: available bytes: 25046528
  flashfs [1]: flashfs fsck took 7 seconds.
  flashfs [1]: initialization complete.
  flashfs [2]: 0 files, directories 1
  flashfs [2]: 0 orphaned files, orphaned directories 0
  flashfs [2]: Total number of bytes: 11999232
  flashfs [2]: used bytes: 1024
  flashfs [2]: available bytes: 11998208
  flashfs [2]: fsck flashfs took 1 seconds.
  flashfs [2]: initialization complete... done Initializing flashfs.

  Radio0 presents 8364B 8000 B8020000 0 B8030000 10
  Present Radio1 8364B 8000 B0020000 0 B0030000 C
  Waiting for auto-negotiation complete PHY... TIME-OUT!
  Ethernet link is down.

  This product contains cryptographic features and is under the United States
  States and local laws governing the import, export, transfer and
  use. Delivery of Cisco cryptographic products does not imply
  third party approval to import, export, distribute or use encryption.
  Importers, exporters, distributors and users are responsible for
  compliance with U.S. laws and local countries. By using this product you
  agree to comply with the regulations and laws in force. If you are unable
  to satisfy the United States and local laws, return the product.

  A summary of U.S. laws governing Cisco cryptographic products to:
  http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

  If you need assistance please contact us by mail at
  [email protected] / * /.

  processor of Cisco AIR-AP1262N-A-K9 (PowerPC460exr) (revision B0) with 81910 K/4
  9152K bytes of memory.
  Card processor ID FTX1716E2DN
  PowerPC460exr CPU 666 Mhz, the 0x18A8 revision number
  Last reset of tension
  1 gigabit Ethernet interface
  2 802.11 radios

  32K bytes memory simulated by flash not volatile configuration.
  Basic Ethernet MAC address: 7 c: AD:74:93:36:BA
  Part number: 73-12175-06
  Kit numbered PCA: 800-32268-06
  Revision number of PCA: B0
  Serial number of PCB: FOC17106662
  Top Assembly part number: 800-33866-02
  Top of page the Assembly serial number: FTX1716E2DN
  Top of page revision number: A0
  Product/model number: AIR-AP1262N-A-K9

  Press RETURN to get started!

  * 00:00:09.481 Mar 1: % SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: crypto IOS FIPS t auto
  is spent
  * 00:00:09.490 Mar 1: * CRASH_LOG = YES

  * 00:00:09.490 Mar 1: PCIE 64-bit devices
  * 1 Mar 00:00:09.789: soap_extern_intr_dispatch: no handler for UIC2 intrno 12 l
  n level 4
  * 1 Mar 00:00:10.088: soap_extern_intr_dispatch: no handler for UIC2 intrno 12 l
  n level 4
  * 00:00:12.966 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS auto
  test successful Dot11Radio interface 0
  * 00:00:15.649 Mar 1: % SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: crypto RADIO FIPS auto
  test successful 1Base Dot11Radio interface Ethernet MAC address: 7 c: AD:74:93:36:
  BA

  * 00:00:56.377 Mar 1: % LINK-3-UPDOWN: Interface GigabitEthernet0, changed state
  up to
  up to
  ernet0, changed state down
  * 00:11:00.003 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio1, changed state of a
  dministratively down
  * 00:11:00.003 Mar 1: % LINK-5-CHANGED: Interface Dot11Radio0, changed state of a
  dministratively down
  * 00:11:00.003 Mar 1: % CDP_PD-4-POWER_OK: full power - AC_ADAPTOR inline power s
  ource
  * 00:11:00.012 Mar 1: % SYS-5-RESTART: System restarted.
  Software Cisco IOS, C1260 Software (AP3G1-K9W7-M), Version 12.4 (25 d) JA1, COMMUNICATED
  SOFTWARE (fc1)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2011 by Cisco Systems, Inc.
  Updated Friday, August 11, 11 02:07 by prod_rel_team
  * 00:11:00.012 Mar 1: % SNMP-5-start COLD: SNMP agent on host ap undergoes a c
  old beginning
  * 00:11:00.994 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
  State of GED until
  * 00:11:01.003 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
  1, changed down state
  * 00:11:01.003 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
  0, changed down state
  * 00:11:11.956 Mar 1: % LINK-3-UPDOWN: Interface BVI1, changed State to down
  * 00:11:12.957 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
  State of GOL downstairs

  What are your settings of the nec console?

  You must be 9600, none, 8, 1 and flow controll set off to be able to interact with the CLI

  HTH,
  Steve

  ------------------------------------------------------------------------------------------------
  Please don't forget to rate helpful messages and mark the questions answers

• Jabber video for Ipad (former Movi) on the Appstore

  Hello

  Does anyone know why the video Jabber for Ipad (Movi for ipad) was removed from the appstore? I know customers who were trapped in the new Jabber for Ipad (with CUCM and IM & P), but still works on the old infrastructure VCS and TMS. So now their customer no longer works.

  Is this temporary like in the past with iOS 6 or is it standing like iOS 9 was released and the product is not supported on it?

  What was any communications from Cisco on removing of the AppStore. If Yes, could it link me a cause document or Web page, I can't find anything in the notes version or documents related to the former client.

  Thank you

  Cecile

  JabberVideo aka Movi is EOL/EOS so he would sooner or later, well, no, he's not back - take a look at this thread post and note by Patrick; https://supportforums.Cisco.com/discussion/12607856/i-cant-find-Jabber-video-Telepresence-AppleStore-iPad

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• How to get an apex_collections.clob001 text box without doing bad request error

  For my work, I need to adjust an apex page where copy us paste records to an excel file in a text box to read in the data base. The code for this works very well, except for 1 thing:

  Whenever copy us paste more records as well as the total number of characters is greater than 32767, it gives the following error:

  Bad request

  The request was not understood by the server due to invalid syntax.

  I know that I need to get the content of the textarea component in apex_collections.clob001 and I heard that I need to ajax and javascript to do, but ajax is not my area of expertise.

  Once I have the clob in apex_collections and can be read from in a package I can handle the rest. The text box is called P157_CONTENT.

  Who can explain to me how do I get the content in the text box in apex_collections.clob001?

  I finally got to work with this solution:

  Martin Giffy Souza on Oracle APEX: how send/download a CLOB from the browser at APEX via AJAX

• CS2 "insert disk" message on windows 10

  I followed the troubleshooting of copy and paste records into another and continues to receive messages.

  Is there a computer genius out there that I can hire to make this work?

  Adobe knows what is happening, but they can help!

  1, your original CS2 will not work, you MUST use the special version and the serial number from here

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  2nd, CS2 is so old that it can not work on Win10

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• apply the layer mask selection

  Hello

  IAM looking for a solution to apply a previeuws

  choice of a layer of an adjustment layer mask.

  The gale of my code to select the mask - but when I apply the

  selection, it creates top layer.

  I need to go into the layer mask (alt and click) and then paste it.

  Then turns off.

  Scriptlistender is not helping much.

  
  app.activeDocument.selection.selectAll(); //selects stuff on the preview layer
  app.activeDocument.selection.copy();  //copy that stuff - to paste it into the mask later
  
  var adjLayer = doc.layerSets.getByName("ao").artLayers.getByName("ao");  //searching for a group and specific layer
  var mask = ExtendedLayer.selectLayerMask(adjLayer); // extern function wich selects the mask (does not go "into" the mask - just selects it)
  
  
  pastMask = function()
  {
  
  // Selectin recorded by Script listender
  var idslct = charIDToTypeID( "slct" );
      var desc321 = new ActionDescriptor();
      var idnull = charIDToTypeID( "null" );
          var ref212 = new ActionReference();
          var idChnl = charIDToTypeID( "Chnl" );
          var idChnl = charIDToTypeID( "Chnl" );
          var idMsk = charIDToTypeID( "Msk " );
          ref212.putEnumerated( idChnl, idChnl, idMsk );
      desc321.putReference( idnull, ref212 );
      var idMkVs = charIDToTypeID( "MkVs" );
      desc321.putBoolean( idMkVs, false );
  executeAction( idslct, desc321, DialogModes.NO );
  
  // paste, recorded by script listender
  var idpast = charIDToTypeID( "past" );
      var desc322 = new ActionDescriptor();
      var idAntA = charIDToTypeID( "AntA" );
      var idAnnt = charIDToTypeID( "Annt" );
      var idAnno = charIDToTypeID( "Anno" );
      desc322.putEnumerated( idAntA, idAnnt, idAnno );
  executeAction( idpast, desc322, DialogModes.NO );
  
  
  };
  pastMask();
  
  

  Any help would be really nice. !

  Thank you very much

  Alpha

  app.activeDocument.selection.selectAll (); selects on the preview layer stuff

  app.activeDocument.selection.copy ();  copy such things - to paste it later into the mask

  var adjLayer = activeDocument.layerSets.getByName("ao").artLayers.getByName ("ao");  looking for a group and a specific layer

  activeDocument.activeLayer = adjLayer;

  pastMask = function()

  {

  Selectin registered by the listender Script

  var idslct = charIDToTypeID ("TPCV");

  var desc321 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref212 = new ActionReference();

  var idChnl = charIDToTypeID ('channel');

  var idChnl = charIDToTypeID ('channel');

  var idMsk = charIDToTypeID ("Msk");

  ref212.putEnumerated (idChnl, idChnl, idMsk);

  desc321.putReference (idnull, ref212);

  var idMkVs = charIDToTypeID ("MKV");

  desc321.putBoolean (idMkVs, true);

  executeAction (idslct, desc321, DialogModes.NO);

  dough, recorded by the listender script

  var idpast = charIDToTypeID ("gone");

  var desc322 = new ActionDescriptor();

  var the idAntA = charIDToTypeID ("AntA");

  var idAnnt = charIDToTypeID ("Annt");

  var idAnno = charIDToTypeID ("year");

  desc322.putEnumerated (idAntA, idAnnt, idAnno);

  executeAction (idpast, desc322, DialogModes.NO);

  };

  pastMask();

• How do we install dw cs4 in windows 7 Professional

  DW CS4 can be installed on windows 7 Professional? If so how can I go about it? I get the error message.

  Wow, I never heard that past, records are difficult of Devils bit. Had to be one heck of a manufacturing defect.

  Unfortunately Adobe does not replace the older versions support: Obtain replacement CDs, DVDs, books.

  No biggie, you can download the program from Adobe here:download and Installation Help can use the activation information you have with your broken disks to get the downloaded version on the 30 day trial mode.

• When I try to upload to the FTP server, it says "cannot validate the specified domain is associated with the FTP server and folder Still? "I confirmed with my FTP host and it's alright on this effect. Help, please.

  @@

  Have you tried the jams of the topic resources. You can browse past records, I'm sure I saw a download to the host. Good luck, lets know if get you sorted.