Wireless computer network laptop dv7 sometimes stuck out

Similar Questions

• Activate vista after failure of computer acer laptop (acer would not out of warranty)

  If anyone can help with this, we would be greatfull. (acer would not out of warranty) installed the hard drive in my office so that we don't lose our data and now vista needs wake-up, but we have not all labels on the laptop with this subject activation key.
  We have received for the purchase of the laptop but how do we get a new key for her.

  Computers/computer, Acer laptop are Vista OEM licenses.

  If Vista was preinstalled on your computer/Laptop(which it did), it is classified as an OEM license and is not transferable.

  The license of Vista OEM is related laptop computer/computer originally installed on and dies with the computer/laptop.
  You cannot transfer it to another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• wireless computer dv9410us laptop problem

  Someone at - it a fix for the problem computer dv9410us laptop wireless? Restore to factory for vista 32 bit and wireless card does not appear in Device Manager. Updated the bios and does not work.

  Hello:

  You have two choices, if you don't want to buy another laptop.

  1. buy a usb wireless adapter at low prices.

  2. replace the motherboard (not recommended). The power was cut on the mini-PCIe slot that's why your wireless card stop working.

  Problems of major motherboard dv6000/dv9000 notebooks.

  Paul

• upgrade my computer cpu laptop dv7-4045ea

  can any body tell me I can upgrade my laptop dv7-4045ea cpu and if so what can I improve it with what cpu are compatabul

  Hello

  the next book #1 will show you compatible CPU. The book also shows a lot of things.

  h10032.www1.HP.com/CTG/manual/c02642701.PDF

  Kind regards.

• 10 Windows will not download to my computer hp laptop dv7-7115nr running windows 7 what it seams to be stuck looking for updates.

  10 Windows will not download on my pc crashes looking for updates.

  Hello

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. You are able to install some other updates or he's also stuck?
  2. You have security software installed?

  According to the description of the problem, you can't upgrade Windows 7 to Windows 10. Then I suggest that you return the item mentioned below to upgrade your system to Windows 10 and see if this helps you to upgrade.

  Upgrade to Windows 10 for free

  In addition to this, I suggest to know system requirements and for that you can see the article mentioned below.

  Before installing

  You can also see the article mentioned below to downloaded 10 Windows on your computer.

  Download Windows 10

  You can also refer to article WIKI de Andre da costa provided below and see if it helps you to solve the problem.

  How to upgrade to Windows 10 8.1 for Windows or Windows 7 by using Windows Update

  Hope that the information provided is useful. Let us know if you have questions related to Windows, we will be happy to help you.

  Kind regards

• Envy of HP DV7 - 7233nr: decommissioning victory 8.1 for win 7 computer hp laptop dv7 envy

  I've recently upgraded to win victory 10 8, I am not satisfied one or the other. I bought Win 7 Professional SP1 64 bit generator system "OEM" the other day. I would like to erase the hard drive and install Win 7 pro.

  I don't know if it's easier to re - install win 8 on one partition and win 7 on another. I have the factory restore disks for win 8, which came with this pc. Have never created two partitions, I'm sure I could handle it, but I have now that I won't have the drivers for win 7 on this computer.

  I think I can do this with good help and I ask for this help PLEASE.

  Sincerely,.

  John "stuck".

  I'll keep my fingers crossed and go from there. I'll look around for other similar situations. As I sit here and ponder this object I'll probably imagined more questions to ask. But meanwhile your top shelf and we will no doubt talk again.

  John

• Computer HP laptop dv7 randomly stops, error Kernel-Power 41

  So my new laptop has stopped 3 times in the last 2 weeks, randomly.  No BSOD, no nothing, just nearby.  kinda like if you have unplugged or removed the battery.  He always turns on no problem.  All 3 times it was plugged in and the battery is charged.  In the event log is as follows:

  Log name: System
  Source: Microsoft-Windows-Kernel-Power
  Date: 27/01/2011 15:47:52
  Event ID: 41
  Task category: (63)
  Level: critical
  Key words: (2).
  User: SYSTEM
  Description:
  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      41
      2
      1
      63
      0
      0 x 8000000000000002
     
      60959
     
     
      System
      DV7
     
   
   
      0
      0 x 0
      0 x 0
      0 x 0
      0 x 0
      fake
      0
   
  

  3 event errors are the same.  By chance I hear that the first accident was while I was surfing the net with IE8, it was the only common thing and 1 single tab - on yahoo.com.  The next crash I played Stalker through Steam.  And finally, when I had only Firefox running with 1 Tablet and I was not even touching the keyboard or the touchpad, I just read the screen, lol.

  Any help would be greatly appreciated!

  I thought I found the problem, but it always stops at random.  I called HP and they said that it's probably the motherboard.  I think that's their standard answer if they have no idea what is the problem.  In any case, I have to send it back, I got it for Christmas.  Now I have to use my old laptop for several days.  I am not happy that nobody cares, have a good day.

• HP f023 wm Notebook: led power supply for computer Hp laptop will not go out and won't restart

  I only had my laptop for less than a month. When I stop the power light did not go as usual and it does not restart. What can I do? Thank you.

  Hi @jean309,.

  Thank you for visiting the Forums HP's Support and welcome. I read on your computer laptop 15-f023wm HP and screen flashing after his stop. Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system. If you need an update on the system, you might have a problem as you describe.

  If you ever need to call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link for the number of support in your region. They will be happy to help you immediately.

  Thank you.

• Computer pavilion laptop dv7 4170ez restarts unexpectedly

  Hello!

  I have laptop quite new (2 months) and have problems with it. In the first week, there's this unexpected restart, which is really annoying, because it's sometimes five minutes and sometimes after several hours. I got it on the HP service for 2 times, fira they gave me new hard drive, and the second time thay changed the CPU. But the problem persists. I also updated the BIOS and installed hp dvd windows. Now, I then 30 more mistakes in the last 30 days.

  When I check the eventviewer, I see critical errors, core power 41. For it restarts every time.

  Do you have any suggestions? Is it possible that it is a mistake that has this comuter, or it can be removed?

  Thanks, Geraldine

  Hello!

  I solved this problem by replacing a single bar of ram. I tried every ram separately, tested both separately and discovered that one didn't work at all. If Hp just sent me a new ram and since it works very well.

• adding modules to 4 GB of ddr2 pc2 6400 or 5300 in the computer laptop dv7-3065dx - what is the maximum?

  Can I upgrade my computer memory laptop dv7-3065dx to 8 GB?

  Here are the specifications of your laptop HP dv7-3065dx. According to the specifications, the maximum memory that can be installed is 8 GB. According to Service and Maintenance Guide, you must run 2 x 4 GB SODIMM PC2-6400, 800 MHz, DDR2 at the most from the system.

  Frank

• Unable to connect to the netgear to my computer wireless router dell laptop.

  I use to be able to connect wireless, but now I can't, we have a computer hp laptop, and it always connects ok and shows the other networks is available, I went through all the steps to get out of boredom and the computer tells me to serch for updates the problem can any one help? I use a computer dell laptop with vista bought as a package of pc world

  r Ellis,
  Thank you for visiting the Microsoft Answers community forum.

  If cela used to work, but the fact now, you can try to do a system restore back before the problem started.
  To restore the operating system to an earlier point in time, follow these steps:
  Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  In the System Restore dialog box, click on choose a different restore point and then click Next.
  In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  Click Finish.
  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  What happens when you try to connect - the computer see the router but not connect or not he sees the router at all?  Your wireless card still appears upward and it shows the available networks?  Depending on the answers to these questions, it could be a number of different things, so we have to know what that is and can't.  It could be that anything the wireles adapter has stopped working, the need of drivers update, interference, etc..  Let us know if the adapter is working or not and he sees to all networks or not, and we'll go from there.

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

  Connected to the new router, but locally only.

  Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
  BASICALLY,.

  I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

  I can connect if I use a cable, but its disadvantages.

  I can connect wirelessly with my PC and Ipad. and Internet access.

  I TRIED:
  Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

  Thank you in advance and we hope you can answer this soon!

  I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
  Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

  Hi Bryyaan11,

  You can check out the link to HP support and try to download the drivers for your wireless card updated:

  Support HP & drivers

  For more information, you can also consult the following article:

  Updated a hardware driver that is not working properly

  You can also check the following items and try the steps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• I'm trying to connect my computer hp laptop dx7 3085 64-bit to a 3051 printer has wireless via a mifi.

  I'm trying to connect my computer laptop dv7 3085 I7 Win 7 64 bit on my new 3051 printer J611h > my internet is through a verizon MIFI. Any help will be greatly appreciated.

  Hi cadams,.

  Follow the steps outlined in the document below. Let me know what you find?

  Cannot find the printer ' Error Message appears on the computer for a wireless network Installation

• Computer will not print wireless or network

  original title: my computer is anti-social

  It will not print wireless or network with other computers in the House.  any advice?

  Hello

  1. what version of Windows is installed on the computer?

  2. were you able to print earlier?

  3. are you able to print via a wired connection?

  4. What is the brand and model of your printer?

  5. are you aware of any changes made to the computer, before the show?

  Method 1:

  Temporarily disable your antivirus software, and then print.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Method 2:

  Check out the following link.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps.

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.