Path Design... without switch and blade
Hi guys
I was reading something about the recommendations of path for Vmware:
At least two HBA ports and each port must see both controllers when you use the SAN switch... but the guys of storage configured an IBM Storage DS5100 and a blade of the manner in which I join you there is 1 Format (the way storage configured guy) and Format 2 the way I think it is in line with those indicated by Vmware
In general, there are 2 controllers and there is no system of SAN...
Please your opinions in Format 1 or 2 Format
Thank you very much
You must have a "Cross" connetion... so the format 2.
Each host should see the two controllers (if not you can not handle the changeover of controllers).
André
Tags: VMware
Similar Questions
-
I bought the design Adobe CS6 and premium and I need to download my product on my new laptop computer, however I don't have the CD came it with my purchase. How can I download my product without the CD files
Download and Installation Help-
https://helpx.Adobe.com/download-install.html
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
-
OK to mix 'of connection to the switch"and"close relay switch?
Hi all
I'm developing a test sequence using the card multiplexer 2527 to the track signals. To configure the card, I use DAQmx switch functions. In my application, I have a Subvi routine that imports the data from a spreadsheet Setup and run a loop for to set the configuration for each step (each iteration of the loop contains the channel for 2527 card information). The topology is set on the first iteration, as well as the configuration of the path to the first string.
My concern is this: I need to close the extra channels/relays without changing the topology or resetting the device. In the first round, I use "connection to the switch" function to set the initial path, (ch0 to com0 for example). Then in subsequent iterations of the loop, I use "Relay close switch" function to close the additional channels individually (for example k2). In the end, when the measure is taken, both ch0 ch2 must be closed and routed to com0. This implementation is so sure, or am I somehow to make the adjustments to the initial loop?
I would like to test this with the hardware, but it is not yet available.
Also, I realize that I could use independent topology and configure all relays individually for each step, but I hope that my approach will be easier and safer.
Please notify. Thank you.
GSinMN
Hello GSinMN,
It's OK to mix 'of connection to the switch"and"Close relay switch"If you understand what's happening below. "Switch Connect" connects two channels by closing a path of relay between the channels, then "Close relay switch" can be used to change the State of the individual relays. If you are not careful you can mess up your connection by activating / deactivating relays that are part of the route connecting your channels.
"Also, I realize that I could use independent topology and configure all relays individually for each step, but I hope that my approach will be easier and safer."
I would recommend the topology independent if you want to stick with connections to channels only. http://zone.NI.com/reference/en-XX/help/375472G-01/switch/2527_independent/
Initial connection:
CH0-> pcom0
pcom0plus-> icom0plus
pcom0minus-> icom0minus
icom0-> com0
In each future iteration just connect to the next to pcom0 channel (which will be indirectly connect it to com0):
CH1-> pcom0
CH2-> pcom0
...
...
Jarrod
-
It seems that wrapped text will not host photo resizing without cutting and pasting the image resized, is - what the Muse way is suppose to work?
It would be the default path to wrap the text with the image when you work in Design view.
This document explains more:
https://helpx.Adobe.com/Muse/using/wrapping-text-image.html
Thank you
Sanjit
-
Front Panel Bank of switches and related indicators
I am the design of a test system. I would like a Bank of the individual switches on the control panel to turn the test case. I figured out how to do this. And I can do banks for the indication LEDs (pass/fail) and the field of digital test result. But, I want to tie them together. I guess I should start by using a cluster rather than a table. But how to get banks to act as a single group?
As I have so far, I have a back of switches and a Bank of indicators (of the switching status) for all just play. The indicators do not align with the switches. I'd like a match of 1 to 1 for easy operator use. When I use 'properties' to develop the Bank of the indicator, it won't take the number. It is limited internally somehow.
DH
How about an array of clusters? Easy to use and easy to watch, all lined up.
-
Details of the 536304-001 HP Power On / Off switch and cable LED Assembly for the Z400
Can someone help me with the P5 front header pinout on the motherboard Z400 or on the HP 536304-001 power switch and LED to the Z400 Cable Assembly? I'm getting to is a Z400 motherboard in a case of XW8000. I know that 536304-001 does not fit in the case of XW8000 but the XW8000 part equivalent seems to have mostly the same connections. double color led, led hard drive, power button / stop. I can see an illustration that 536304-001 use 4 connections on the side to key of header and 2 on the other. Cable colors are red, green, black and 3 white. There are also other connections to the temperature thermistor that I would not intend to use (unless explicitly required for Z400 motherboard).
Here's a panel header pinout before Z400 P5 motherboard:
Find "missing" pin key 14 to steer this diagram properly.
Pins 2 and 4 go to the power LED. This LED is two-way, with green in a sense (normal) and Red (diagnosis failure) in the other. If the LEDs back to back are installed between pins 2 and 4, on lights. If green it does not illuminate during normal operation, move the pins to the pair of diodes.
Pins at 15, 17 and 18 are chassis ID pins. It's OK to let those pins unconnected.
Pins 6 and 8 are the power button pins. Connect a normally open push switch between pins 6 and 8. Do not attach any tension or Chin-ups to this switch.
RESET # may not work, but it is a prototye signal. A switch push-button normally open between pin 7 and 6 (GND) could make it work. It's OK to let those pins unconnected.
Terminals 11 and 12 are the thermal diode in the panel cable Assembly before Z400. The system starts without the thermal diode, but fans can operate at full speed all the time, or may oscillate in speed (several times to go from slow to high-speed and back). This will make the system very noisy.
-
The same thing happened to me recently: the hand left panel doen't show the usual "Control Panel Home" switch and my control panel display is stuck on the classic view. Click on "Show common tasks in folder" but that doesn't change anything. Finally, I tried a restore without success point. No idea how to get back the link "control Panel Home"?
Thank you very much for your support
Alain Truchat
Split from here:
Hi, Alan.
Reset Control Panel-
Press Windows key + R
Type inetcpl.cpl regsvr32.exe/n/i
Press ok -
Why the fast user switching and the new Windows Search use the Terminal Services?
Recently, I was struck by a piece of really bad, malicious malware that totally trashed my operating system. Therefore, as I rebuild my system, I am applying the appropriate safety precautions. Among the recommendations of Microsoft is to reduce your footprint of security by disabling unnecessary services. One of these services that I thought I didn't need was Terminal Server services, since it is a way for a person to get to my machine remotely.
It turns out that, however, other services that I want to use, such as Fast user Switching and window new search utility, depend on the Terminal Server Services. It makes no sense to me from a safety point of view. This seems to be a bad design decision, because security trumps utility.
If Microsoft is listening, I would like to know why you made this decision and you have changed in Windows 7?
Second, is there a way to always have the Terminal services Server running and at the same time cut access remotely through this service?
I don't know about the 'new' Windows Search, but what about the fast user switching you ask to run several sessions of Windows when you switch between users (a session for each user connected) and the only way that Windows can do is to act as a quasi Terminal Server, it needs Terminal Server services to run multiple sessions.
John
-
An email from my address!
I received an email from my address in my junkbox subsequently, I deleted without opening and tried to block without result. Is what kind of scam or virus? How is it hotmail allows this weird deliveries?Hello
Answers is a peer group supported and unfortunately has no real influence on Hotmail.
HotMail has its own Forums, so you can ask your questions there.
Windows Live Solution Center - HotMail - HotMail Forums Solutions
http://windowslivehelp.com/Hotmail - Forums
http://windowslivehelp.com/forums.aspx?ProductID=1Hotmail - Solutions
http://windowslivehelp.com/solutions.aspx?ProductID=1How to contact Windows Live Hotmail Support
http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htmWindows Live Hotmail Top issues and Support information
http://support.Microsoft.com/kb/316659/en-usError message "your account has been locked" when trying to connect
http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2Compromised account - access unauthorized account - how to recover your account
http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41Hotmail hacked? Take these steps
http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx============================================================
Proceed to a very thorough check for malware and then change your password by e-mail.
It is possible for a person to send the email that 'seems' to be of your
account but that is not really - called "Spoofing." That means its 'Possible' emails
were not really you, although they may have your contact list. Have someone
who receives the e-mails to check the header to see where he is actually sent by and
NOT only the answer to the address.How to read the message headers
http://www.emailaddressmanager.com/tips/header.htmlWhat Email Headers can tell you about the origin of Spam
http://email.about.com/cs/spamgeneral/a/spam_headers.htmE-mail spoofing
http://en.Wikipedia.org/wiki/E-mail_spoofingE-mail spoofing and Phishing
http://www.mailsbroadcast.com/email.broadcast.FAQ/46.email.spoofing.htmUnderstanding E-mail Spoofing
http://www.windowsecurity.com/articles/email-spoofing.htmlFraudulent emails (false)
http://pages.eBay.com/education/spooftutorial/Google search - email Spoofing
http://www.Google.com/search?hl=en&EI=FB1nS9DiNo7CsQPNhKGdAw&SA=X&Oi=spell&resnum=0&CT=result&CD=1&ved=0CAgQBSgA&q=email+spoofing&spell=1=============================================
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeRun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Previously I was using WIndow Vista Home Premium but recently I installed Windows Vista Ultimate.I m having problem my computer turns off automatically (is not closed correctly at the time of the switches) and when I start it gives message that windows do not close properly seeded.
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
information on errors such as STOP and information such as IRQL_NOT_LESS_OR_EQUAL codes or
PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisions
http://www.NirSoft.NET/utils/blue_screen_view.html
Displays information on all the "crash" of a table - freeBlueScreens many are caused by old or damaged, drivers particularly video drivers but it
are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Connect in SSH without username and password
Hi guys,.
Anyone know if it is possible on the switches of the small company to open a session using PuTTY without username and password.
For example, to hold a PKI SSH on the machine which has PuTTY.
Simply connecting this specific machine connects you automatically in the CLI of the switch.If possible, how would I go to do this?
REMKO
You can of course.
First, you must enable SSH access to the switch by going in "security: TCP / UDP Services" in the GUI, choose SSH access and apply the configuration changes.
Then, you enable public key authentication by going on "user security authentication: SSH on the server: SSH", allowing the two "authentication by public key SSH user" and "Auto-connect" and apply the change.
Finally, in the same section, you add a user existing in the Table of the SSH user authentication. Paste your public key RSA and apply.
Save your changes of configuration and you are ready to go.
This approach works well on a SG300, but different small business switches can go about things a little differently.
-
Questions asked by a beginning. CF, HTML, change of name/path of the folder and the addition of home page.
Hello, I got this new job and I'm trying to understand it as soon as possible. I'm a complete newbie to html, CF and web development
Yes, I caught a few books, but if you can help me. I appreciate a lot is.
I have this file structure
Z:\ToExport\RepDocs\MyReport
Pointing to this one
http://myserver/MyReport/
You will find a folder of MyReport
And find 2 .cfm
1 index
2 version.cfm
I have 2 BIG questions, ok 3
HOW TO MAKE A PAGE THAT WILL CONTAIN
The link of this MyReport.
A home page. In other words.
Homepage that contains a main report text
Name of the division_
Then a link called my reports. And your report
Prefereably sorting
· My reports.
· Your report
HOW CAN I CHANGE THE FOLDER
Of
Z:\ToExport\RepDocs\MyReport
Pointing to this one
http://myserver/MyReport/
TO
Z:\NewExport\repmining\myreport
And then tap on it
http://myserver/ repmining\myreport
WHY IS THE REPDOCS NOT TYPED IN THE BROWSER WHEN YOU VIEW the MYREPORT. (I don't have to type (repdocs) to view the report)?
in other words:
Z:\ToExport\RepDocs\MyReport
Is typed
http://myserver/MyReport/
without repdocs.
Please excuse me.
I am a true beginner.
Thank you.
Hope someone replies soon.
Take care.
OK, I think I understand your questions, so here:
Quote:
HOW TO MAKE A PAGE THAT WILL CONTAIN
The link of this MyReport.Just have a link on a page, e.g.:
TEXT of the LINK,
As for your question on your reports, I don't understand what you're askingQuote:
HOW CAN I CHANGE THE FOLDER
Of
Z:\ToExport\RepDocs\MyReport
Pointing to this one
http://myserver/MyReport/
TO
Z:\NewExport\repmining\myreportAnd then tap on it
http://myserver/ repmining\myreportIf you are directly connected to the server, simply create a folder (what looks like) Z:\ToExport\RepDocs\ which is the new name of Fortin, ex:
Z:\ToExport\RepDocs\NEW_folder and put the files into it. If you are now directly connected to the server, use a program such as FTP server to connect via FTP and do the same thing.Quote:
WHY IS THE REPDOCS NOT TYPED IN THE BROWSER WHEN YOU VIEW the MYREPORT. (I don't have to type (repdocs) to view the report)?
in other words:
Z:\ToExport\RepDocs\MyReport
Is typed
http://myserver/MyReport/It is simply because http://myserver/Myreport/ is set to point to the Z:\ToExport\RepDocs\MyReport file so it looks http://myserver is set on the Z:\ToExport\RepDocs\ folder anything you add to a folder which will be included.
I have IE hop answered some of your questions
-
design of music and photos of iOS 10?
Does anyone think like ios 10 downgraded the design of music and photos? the words are so great - looks for an older ios apps. Don't look so modern plus
Yes. And the double column view with large thumbnails / tiles in 'Albums' (in the Photos App) is quite boring and more difficult to navigate if you have lots of albums. Single column works best when scrolling down. This seems to be an interface for children.
Also added to the problems with the application of music, is that now you can only display the albums alphabetically - no release date and I see a lot of OLD playlists appearing BEFORE the most recent albums I bought in the "Recently added" section of the music library. Great job on this one, Apple.
-
I would like to be able to access the start page of Thunderbird at random times, without disconnecting and then insert it again.
Is this possible?
Under the GO menu is PAGE of STARTING PRINCIPAL.
The shortcut is alt + home page.
-
After stopping Firefox opens again without history and previous tabs
Before each trip, I quit Firefox 31 my Mac Pro 10.9.4. He had several extensions, bookmarks and open tabs. I've done this hundreds of times without problem and Firefox always opens with everything intact. Then I stop my Mac.
This time, on return, I started my Mac, clicked on Firefox to open it, and it opened as a blank Firefox version. He was still Firefox 31, but all my extensions have disappeared, my story was gone, clearly my Session Manager had disappeared and all my previously opened tabs disappeared.
How can I recover the Firefox I have quit smoking before I stop my Mac? P
COR - el,
I was able to recover a backup off site of the cloud of August 4. I see two similar 9kn2yszu.default and 9kn2yszu.default\searchplugins profilesThe profiles.ini only uses the first profile. It turns out that this same profile is one of the two that exists on my Mac. But it doesn't have the same content!
A profiles.ini made an appearance on my Mac now.
I was thinking about copying and pasting the contents of my backup profile to replace content in my current of the same name, as per profile
https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles
I was going to wait for your ok, but I guess I can't do more damage that I have, so I'm going to come.
. . . . . . . .Well I did, and it seems to have worked. I have all my tabs back and two windows of Firefox using Session Manager which is also back back.
I mark this solved when I get your comments and if you can suggest this as another profile, 9kn2yszu.default\searchplugins, is on about. Should I copy it to my profile as well?
I realize that my Time Machine backups were not corrupted by them open at the same time as the Finder on my Mac. Patterns were the same, but the content of this profile of August 6 looks at the content of the profile of the same name by August 4 I used. But, the same file, just before I made my copy and paste had lost almost half of its elements.
It could be a good idea if Firefox was a way to save their profiles automatically to another file somewhere else. This doesn't happen often, but I lost only several precious hours over the past three days to get it resolved.
Thanks again, for help.
George
Maybe you are looking for
-
Satellite Pro M10 - horizontal lines on the screen in different areas
Hi all I hope someone can help.My Satellite Pro M10 seems to suffer a display problem where I have horizontal lines on the screen in different areas.It would be well for 10 minutes and when the laptop seems to warm up this problem begins, then shortl
-
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (Wdf010000.sys)
I wake up my Hp envy laptop and immediately, it crashed showing the above message and it says that it restarts after data collection. It says 100% full and 20 minutes later there is no change. What should I do? Laptop it hp envy m6-1310sa.Thank you v
-
activation of the relay using rs 23
Is there any sign of low cost in which a relay can be activated through labview with rs 232 communication. Please let me know as soon as possible. I need to acivate for a 5V with a labview timer relay and it should be communicated via rs 232 for the
-
Cannot install the Intel Graphics Media Accelerator Driver
* Original title: what is graphic driver install I have and HP Compaq that I try to update the driver Intel Graphics Media Accelerator. The office is currently running Windows 7 Home Premium SP1. Don't know if this information is necessary, but it
-
exclamation points next to the song title + can not play the song
I get these at various times and don't know why. They produce when I click on a song to play or copy it into my ipod. If I close itunes and then restart it, all of them disappear, but the process continues to repeat itself. I want to throw my compute