Path of the file on the Mac network server
Whenever I have to create a link, I need to dig 7 clicks to get the files from site that I'm looking.I just started using a Mac, with sites located in a network SMB server. Therefore, this issue could be associated with Mac/Samba.
(When you work on a PC all paths to the site for the files I was working on locally attached by default to the root of the current site.)
I am currently working on sites located on a network. I set sites on the Mac. However, when I open the file on the network server and try to create a link, the default file browser in the Documents directory on my local Mac system. So I click 6 clicks to enter the correct network directory. This occurs for each link. I hope that there is something that I can change somewhere to set the path of current default file of the document being edited.
Thank you.
> Then when I click on properties to create a link, the file browser
> default values
> in the locale of the CMA Documents folder.
Oh! Gotcha! Yep, that's how it works on my Mac. Rather boring.
It might be better/easier just drag the link icon to your site window for
make the connection in this way, or if they are images, just drag the images of
part of your site on your page.
-Darrel
Tags: Dreamweaver
Similar Questions
-
New Guy Question - Disable Multi-Pathing on the VCB Proxy Server
Hello everyone
I had to install a Solution of the VCB Proxy. Among the issues is "Disabling Multi-Pathing on the VCB Proxy Server.
Why would it be necessary to disable the multiple paths on th e VCB Server? What would be the steps to disable the multiple paths.
Thank you all for any input on this issue.
Here you go:
[i] Jerry [/ i] of the Jason
[boche.net - VMware virtualization evangelist |] [ http://www.boche.net/blog/] [/i]
[VMware communities user Moderator |] [ http://www.vmware.com/communities/content/community_terms/] [/i]
[Area of Minneapolis VMware User Group Leader |] [ http://communities.vmware.com/community/vmug/us-central/minneapolis] [/i]
-
Better conservation to use for the Mac Mini Server
Hi all
I have a Mac Mini, I want to start using a server around the House. Manage other Macs around the House, centralized Time Machine and are also used as a file server for both Windows I have machines.
Therefore, a Mac Mini with 500 GB of storage, so I obviously need to add much more. Ideally, I'd like to build a 5 4 Bay RAID system but it is there, I seem to be failing and need help. I seem to have 3 options - stroke of lightning, USB, or NAS.
Love at first sight seems to be too much and a lot of people say he exaggerated in any case for a home installation
NAS seems to be the most cost-effective way, but then negates the point of the Mac server still?
USB looks good, but I can't find any decent USB enclosures, are there who would recommend?
Thanks in advance
Mike
Unfortunately, many would say that Macs are not appropriate to use as real servers for businesses, however some do and for small businesses, they are perfectly usable. Obviously in a situation of host concern the most appropriate a Mac as a server is completely different.
While the most common choice for the storage of a Mac server these days would be an external RAID Thunderbolt for example the promised Pegasus R4 and R6 lines, I agree for a location that a NAS solution may be more appropriate.
A NAS can act as a universal file for Mac and Windows PC server, should not let the Mac on all the time, and most NAS devices support also act as a Time Machine backup server. However, some people say that based NAS servers Time Machine are not reliable enough and you may use a real solution of Apple as a Capsule or a Mac running Server.app and sharing a drive as a destination of Time Machine.
I agree somewhat that NAS based Time Machine systems will not be as reliable as a real Apple one, but I'd also probably say that they are not either completely useless. For example, I use a NetGear ReadyNAS as a system of Time Machine and I'm pretty happy with it.
In addition, for external storage, there are additional options.
- USB, as you said
- FireWire is always possible even if you suddenly need lightning to FireWire adapter, you can even get a FireWire RAID solution
- Love at first sight as the promised Pegasus system I mentioned
- NAS - you can connect to it via NFS and "re - share" via AFP via the Mac server
- iSCSI Ethernet to a NAS system, could be directly at a customer or could be're-shared' via AFP
- Fiber Channel to aid suddenly in love with FDDI card and then have a configuration Fibre Channel SAN - very expensive and often used by video editors
- Maybe a bolt of lightning to eSATA adapter, then an eSATA storage solution
-
Different segment of the USB network server error
Running Windows Home 7, with a wired USB (SOHO) server when connected, he says 'Different Segment of USB network server' how can I solve this problem?
Concerning
Hi David,
Thanks for the update on the issue.
If the problem persists, try these methods below and see if that solved the problem.
Method 1:
There may be several reasons why a computer is not able to detect a signal wireless adapter. Wireless networks appear only if your PC has a wireless network card installed, the adapter is turned on and the wireless access point is within reach. Many network connection problems are caused by hardware that is not configured or the drivers are not installed properly. Follow the steps described in the article below to check on all aspects and troubleshoot accordingly.
Windows wireless and wired network connection problems
Method 2:
If you cannot connect to a network, it could be a problem with your network adapter. You can try to use the network adapter troubleshooting utility to automatically find and fix some common problems.
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
Keep us.
Kind regards
-
Error calling CFC {path to the cfc} Internal Server Error
I have a CFC bind cfgrid passing page, pagesize, etc... some search entered to a cfc function. I have a cfgridcolumn which is a checkbox column (display checkbox images in as the column and I have a Javascript click here for images to the box unchecked/enabled the user will treat as a checkbox if it's pictures of box). I have more than 1,000 records in the grid and I have a drop down for the check all button the cfgridcolumn passing whole entity ID to a javascript function that creates a proxy cfajax call to invoke a cfc method and post these identifiers to this method, this method receives all the ID of 1000 + entity to a temporary table and invoke an oracle stored procedure changes in the table and Finally my grid refreshes as well as I can see that are all checked images of the check box in the controls cfgrid. It works very well in my localhost (CF 9 + Windows + Jboss) but everything by moving files to the Dev (CF 9 + Linux + Apache) Server I get error invoking CFC's internal server error. What is interesting is if I spend less than 500 ID entity that it works very well in Dev server. Why it does not work if I spend more than 500 feature ID.
Thanks for your reply. I had solved it. I spent all of the 1000 + entity ID as an a list separated by commas to the FCC who does not like in a Linux environment. So I changed to a table object instead of comma-separated list values and pass it as an argument of table to CFC. Now, it works fine.
-
and impossible to email - they get bounced back with the error, Server error: 550 5.1.1 <*** email="" address="" is="" removed="" for="" privacy="" ***="">recipient rejected, relay not allowed here. "What can I do to fix this?
See if you can access your account via webmail. This way you are not blocked.
Most e-mail providers don't allow you to send from a location which you are not connected through their service. So if you leave the House and connect, then they block to prevent spammers to send through their service. Many have a way around this in the account settings, but only your e-mail provider may indicate what are the appropriate settings, because they are specific to the provider.
Steve
***> -
Hello
We are about to activate SSO in our environment. Accordingly, I need to change the value of user_pref ("network.automatic - ntlm - auth.trusted - URIS", 'my domain'); > > prefs.js.
I created a simple .bat file to make the necessary mod and add the line to pref.js. When I run the file, it displays the prefs.js to the same location, not the Mozilla AppData folder. We are active with folder redirection Win7 environment. As a result, Mozilla. our users AppData folder is located at \\my domain\dfs\XenDesktop\Profiles\username\AppData\Mozilla\Firefox\Profiles\default (the default random profile name). My question is what is the best course of action to add this file any PC user pref.js.? Keep in mind that the pref.js is located on the path to the hidden network that I have included above. I apologize if my question is not easy to understand.
COR - el, I thank you once again for your help. I was able to use lockPref, set the value of, network.automatic - ntlm - auth.trusted - URIS.
I'm all set.
-
This follows a previous thread of mine. Previously, the Mac mini server (2009, 3.1 I think) would not start. The Apple logo and the spinning wheel seems forever.
I found the boot disk and a USB optical drive and so I went in disk utility. I got the software RAID 1 set up. Hard drives were fine, physically, but the whole RAID said it is "degraded" and one of the volumes said it failed. I tried rebuilding it but failed. I did not delete the volume down, instead, I deleted the whole RAID, thinking that I would be able to start the disks as standalone. Instead, or volumes are mounted, they not only mount when I click Mount, and when I turn on the machine, I now get the folder with the?. No volumes appear when I hold down the option key when starting. I tried discs of fixation of the Terminal and he says they were mounted with success, but they were not. I must be missing something in the commands, I don't know them well. I tried to create a new RAID array, but he said that all the data would be deleted. At any given time, two RAID volumes said that they failed, and then the RAID array would not appear or appear offline as opposed to gradient.
I screwed myself by removing the raid array? Both drives are dismantled and their partition type is "Apple_RAID_Offline".
Can I fix this and back up my data?
I fixed readers are not mounted or named myself. They are (were) mounted as an independent non-RAID drives. They needed to be repaired and could not repair one of them says however, disk utility. Disk utility also told me at my backup files and wipe the readers. How can I back up my files if I can't start the machine? There is no Finder on Mac OS X Server installation disc.
Any suggestions?
Solution to readers being dismantled: https://www.27partners.com/2010/07/repairing-appleraid/
-
The network location of my folders in offline mode has changed while I was offline. (HE moved to a new server). How to re - run my offline file path to the new location so I can sync?
Windows System 7.HelloWelcome to the Microsoft community forums!The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.Hope this information helps. -
[JS MAC] Problem of path of the file with special characters
Hello
I'm trying to declare the path of a file on a text file. One of the folders includes a special character such as "love".
So, when I try to write a txt file with this path, it fails.
Here are some that I've isolated for debugging.
The problem appears on a Mac, but may be present on a PC as well.
Given a file open in Indesign
This file is placed in a subfolder named "love."
Dittos var = line (app.activeDocument.fullName);
var myFileFullName = theFile.fsName;
var modifsArr = [];
modifsArr.push (myFileFullName);
var queue = txtFile (Folder.desktop + "/ test.txt");
If (file (Folder.desktop + "/test.txt").exists is false))
{
var txtFile = new file (Folder.desktop + "/ test.txt");
}txtFile.open ("e");
txtFile.seek (0.2);
modifsArr = modifsArr.join ("\r");
theFile.write (modifsArr); Here the writing fails
theFile.close ();How can I solve that?
TIA
Loïc
Adjust File.encoding...
Dirk
-
We bought the RAM for one of our PC, an upgrade from 4 GB to 8 GB. Naturally, we must now upgrade Windows 7 32 bit to 64 bit.
Our PC is running on a domain within a university network network. We have experienced some problems with one of our PC recently, so I reinstalled Windows 32 bit (no formatting). After which I simply installed the motherboard network drivers, and with one or two small parameters we were back on the domain network. Previous data has been saved to the Windows.old folder, so we kept all our old data and re-installing Windows fixed all the problems we had.
It is therefore clear that a reinstallation of 32-bit retains all the necessary parameters to return immediately to the domain network. My question is, will an upgrade from 32 bit to 64 bit also keep the settings? Apparently, the essential is that the MAC address must remain the same, which I suppose it would be?
On Mon, 17 Sep 2012 12:17:09 + 0000, RuanPietersZA wrote:
Thanks, I appreciate the comments.
I'm not so worried about the data, let's back up on an external drive anyway. The main concern is the connectivity of the network domain. If we lose this connection after the Windows Installation, you pay the University of departmental again it to the installation program.
If you go from 32-bit to 64-bit Windows, you must perform a cleanup
installation. An upgrade is not possible. The new facility
begin by formatting the drive, and all the disk are lost.Ken Blake, Microsoft MVP
-
I'm trying to make an application to work with Mac Office AIR.
This app is a simple charger using flash.display.Loader
I can't simply load an image using this path:
file:///users/myself/documents/images/image.jpg
I am not sure mac OS, someone a idea?
Thanx
Found!
'-' must be ' / '.
and
musth absolute path starting with "file:///".
file:///myPath/image. -
No network has agreed the provided network path
Hi all
I have a network of "Working group" composed of two XP Pro PC, a XP Pro laptop, a network printer and a router Linksys (BEFSR41) attached to a Wireless Linksys (WRT54G) router. All PC's are running
identical versions of protection ESET, WIN XP Pro, etc.When wired, every PC can access the internet, can share (explores/delete/copy/move, etc.) of files, can access the printer, etc.. In other words, they work as they are supposed to.
When you use the connection Wireless on my laptop, it's different. The laptop can access to internet and printer, but none of the two PC. Also, none of the two PC can access the laptop either. When I try to explore (Windows) wireless, or if I try to communicate with the PC in any other way, I get the message error 'no network did accept the provided network path '.
I searched on the web and even tried the stuff that has no sense ("turn print files sharing & '...) If it were not already activated then why it would work when wired?). I even tried a new wireless router with the same results. Again, everything works as expected when cables.
The ONLY time I was able to access the shared files on every PC wireless was when I turned off the wireless security. In other words, if I turn off the key WEP/WPA/etc. of the wireless router, THEN I can do everything I could when wired wireless. I don't feel comfortable in this regard ;-).
I didn't used to have this problem so I suspect it may have been caused by Windows software update or security.
Someone please offer suggestions of what I could try to fix this? I would surely appreciate!
Is ' all remember in the movie "Jumping Jack Flash" where
Whoopie Goldberg was given to the riddle "what is the KEY? '?IT IS CORRECTED! Now, the bad news... I am not sure whether
set by one, or a combination of things (and don't have the)
time to revisit every step, one at a time, to determine).First of all, I have disabled dynamic DHCP on the router and then tried to
give a fixed IP address to each device on the network. Since I was
am not a magician, I can not done correctly.
Believer, I took unnecessary devices out of the network
now that a desktop PC and laptop. Everything that
has worked properly wired, but not wireless. This
eliminated the DHCP server as the cause.I also tried static IP addresses with MAC filtering. Even
result.It was suggested to use the router installation disc
in the laptop, making sure what was the ONLY PC attached to
the router set up. I decided to wipe it off, restart
from scratch and a router reset (to factory specifications).
Using the drive led me to unexpected errors in communication
When installing... I must have tried three times before
have the installation go properly due to a notch or
another being incorrect on the laptop. I'm not sure to this
point to know if the settings have been changed during testing or
before that the problem surfaced first. I'm sorry. :-(. In any case, after
the installation went through, I was back to square one with
the same results and it was time to implement a
Routine Diagnostic basis of strategy!Remember I mentioned in my OP that I disabled the
security without wire, then everything worked? It was my
main index. The router instruction manual * clearly *.
indicates that the network will run as expected if the
the router security key does not match the security key
used in wireless devices (laptop). I must have read that
100 times.In the router under Wireless Security Setup window
It offers a choice of security key for "Disabled", "WPA."
("Personal", "WPA-Enterprise", "WPA2 Personal", "WPA2)
Company', 'RADIUS' and 'WEP '.On the laptop, in the "Properties".
File Association tab there is a drop down menu to
'Network authentication '. Here, I can choose a security key
of 'Open', 'shared', "WPA", "WPA - PSK", "WPA2" or "WPA2-PSK.This is where it gets confusing. Apparently, there is a
difference between what the router calls a security key and
What laptop called a key... In other words, security
the key of the router offers are not * identical * to the
choice of laptop. After learning what are the differences each
security key was, I determined "WPA Personal" is not the same
like "WPA - PSK". "PSK" is not equal "Personal" means
"Pre-shared Key". My bad. How stupid of me to not assume that
the names were different! Why are there no uniformity between
that the router offered and what are the choices has had the laptop?Knowing 'Disabled' (called 'Open' in the laptop - see the)
similarity?) worked, I tried the next enhanced security
key, 'WEP '. That selection offered some protection but not
everything worked! Then I tried "WPA" then "WPA - PSK", etc.
until I found (what I believe to be) the only security key
to work properly... "WPA2 Personal" on the router and "WPA2".
in the laptop (SAME aspect you?) allowed me to do
all that I could do wired! I had assumed
erroniously, that if the next highest security key does not
work, none would be. I was wrong!Weird: I believe in my frustration, before
by selecting the WPA2 key, I'm distracted me and I ran the
Assistant wireless network on the desktop PC. Keep in mind
This PC has no wireless card. After having 'done '.
with success", I explored the laptop and vice versa
Wireless! This step may or may not be the "KEY" to all the
the long, sorry.BTW, I think it was "D" (the key the song was written in)
;-))). -
Path to the file on the virtual machine
Hi people
I am aware of VMRUN and would use call programs on the virtual computer and move files between the host and the guest. I don't know exactly what it does good, nor how these virtual machines are actually structured, so I would like someone to clarify for me if it is even possible to have a host path to a file on the client VM.
For example, I use scripts from my Mac that do a lot of editing on the side of the virtual Windows machine - is there is a way, I can use to refer to and modify a file on the virtual machine without using VMRUN.
Thank you very much!
Mirroing is a little difficult, I don't think that anything that is either duplicated with shared folders. What happens is the Windows to the Documents, music, path is set to a UNC path (vmware-host\), which is served by the VMware HGFS file system, a mechanism for sharing private with OS X. In OS X, just the files live in any directory is shared. But that's what you say, a place with several shared paths.
For SMB sharing, sharing so once mounted on your Mac, OS X uses a SMB client to Yes go on the network to access files in your guest VM files standard Windows. All traffic is host only, unless the virtual machine is filled and you use the Wifi connection, in which case the traffic can "bounce" the point of wireless as a jump. There are ways to optimize the network path, so all traffic is strictly host only.
I have not benchmarked HGFS v. SMB, but there is a "tax" anyway compared to the opening of the VM file on its file system local. For your use case, it is probably useful to check the two options.
-
Showing the full path of the file in the Save as dialog box
I'm a relatively new for MAC OS and I took the habit of intelligent services on Microsoft file manipulation, in particular to the Save as dialog box. Who has a little smart "arrows" and "buttons" allowing you to ask around the system of files easily, but I faced something else in the MAC operating system.
Finally, I was able to pass on the path of file bar in the Finder (basically, that nice, small bar with the name of folders/sub-sub-sub-folders you can switch to and it shows "where you are both in the file system"), but I don't miss the Save as dialog box. I tried to find it in the settings to turn it on, scoured the internet, talked with experts at Apple, also called the central phone number, but I couldn't learn all solutions to get the bar path of file under tension to the Save as dialog box.
And believe me, it's very annoying, when you create a file structure when you register under ' week/Tuesday/XY client Documents/work/approvals/journal/2016/August/2nd /' a file and for the recording of the version changed the same file under the same path, but not to not only return to the file a subfolder creation there AB of the customer, I have to click again through the whole lot.
The arrows 'story' don't help because when I click on the it puts me directly to record under the folder where I have the last recorded the previous file, or help click on the drop-down above, where records are listed because I could never find the subfolder where I want to go back to there.
Are there solutions to get the path of file under tension to the Save dialog box under?
Or is there a plan to get it in the new version of the operating system?
It is the same on the open file dialog box...
..., and I don't want to keep a Finder opens just to copy..., on the way to the record, which was the same effort and has been even more professional!
I would like to just turn this simple file path bar,..., even that which is available in the Finder!
Any ideas would be appreciated, thanks for sharing your thoughts in advance, Ian
Imre of Glen Waverley wrote:
Are there solutions to get the path of file under tension to the Save dialog box under?
Or is there a plan to get it in the new version of the operating system?
It is the same on the open file dialog box...
1 NO.
2. we are all just users here and have no info about Apple's plans.
If you do not want to let Apple know your feelings, you can send your comments here.
Maybe you are looking for
-
Satellite L305-S5955 - gel of the boot process
Toshiba Satellite L305-S5955Once it froze early in the boot process - until windows starts, indicating (to me) it must be material. John
-
Satellite T130 - 11 H Factory Reset - problems later
I factory reset my Toshiba laptop and now I have problems. When I start the laptop I constantly get the message "prepare your pc for first use" and it starts, Toshiba menu starts too and keeps telling me it's to complete the installation. Randomly, h
-
l don't want calls FaceTime anyone! What l do to completely turn off the FaceTime?
I just got the iPhone 6s more & l do not want calls FaceTime anyone! What l do to completely turn off the FaceTime? I read about some callers blocking, but I want to block all access to me via Facetime. Thanks for any help you can provide! E
-
Get the reference to menu bar for Sub VI
Hey everybody, I've seen this asked questions here before, but it has been a few years, so I thought I would ask again. I have a parent VI I want to edit the menu from the time of the execution of a sub VI before Sub VI currently works. I have not fo
-
WordPad is supposed to be included in XP, but I don't have it on my computer.
WordPad is supposed to be included in XP, but I don't have it on my computer. The directions say: go to START, then ACCESSORIES, but it is not listed. How to do it?