Pathfinder for forms only? Cannot not less the purpose of leading to the rear...

Similar Questions

• How to store files in iCloud drive ONLY (do not use the space on my MACBOOK hard drive?

  How to store files in iCloud drive ONLY (do not use the space on my MACBOOK hard drive?)

  I want to save the file in my iCloud account, but free space in the hard drive of my MACBOOK

  I want to save the file in my iCloud account, but free space in the hard drive of my MACBOOK

  There is no practical way to do it.

  If you do not enable iCloud Drive on your Mac, you can upload files to iCloud by car via the web interface at https://www.icloud.com

  But you can access the files from the web interface and won't icloud drive as drive in the Finder.  You cannot use the Finder to access the files. You need to download it to use.

• the simple contact form widget does not allow the user to submit. the lunch box turns red. What should I do?

  the simple contact form widget does not allow the user to submit. the lunch box turns red. What should I do?

  Hello

  You have used a form of e-mail field to create 'Appetite' section. This is the reason for which form registers an error as its not able to recognize an e-mail here entry.

  email form field is a required field for form of Muse. Please rename back to e-mail and also to create another field in form in the widget forum (go to the Option to form and enter a single-line text field) and it should work properly.

  

  Concerning

  Vivek

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• How to identify the buttons for forms in rows not columns

  Hello

  I have a long questionnaire with 100 lines.

  column 1 is the question.  Column 3, 4, 5 and 6 are responses of buttons (none, moderate, mild, extreme).  Buttons, which means only one answer allowed per line.

  There are headers for the buttons.    When this excel spreadsheet to adobe acrobat conversion - works.   But after creating a form buttons are labeled by column not online, then... they are not the true option by row buttons.   In other words, that one response per column is allowed, the opposite of what I want.

  How to solve this?   I change this by the original format or some global change?  There are a total of 100 buttons.  Much too laborious to change each one individually.

  
  

  Thank you.

  Yet once you create an option button or check box field. Then copy this field 5 times and place as needed. This should give you a line of 5 boxes or option of checkboxes with the same name. Now for each button field, right-click the field and select the 'Properties' option in the context menu. Select the 'Options' tab and assign a different value to the value of the option or the value of the exports. This means that you EF the same value for the fields in a given column.

  As a suggestion, start with a small form and see how the system works.

  From my experience of conversion Excel 'shape' a PDF form is not the best approach.

• Scanning for bad sectors will not complete the scan on the c: drive

  I'm especially to keep my computer clean and virus-free. I'm doing a viriety of scans on a regular basis. Recently, however, the analysis of bad sectors is competing in 3 of the 4 phases then hangs at 71% on the 4th phase and did not finish the scan. I use Windows XP Pro Media Center Edition on your desktop HP 864n. I tried to use the scan at startup upward as well as the patch file without result system errors. I also tried the safe mode.  I even made a destructive system recovery, windows reinstallation. Nothing helps!

  The hard drive is probably bad. Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. If it fails the physical tests (or cannot finish their), replace it. MS - MVP - Elephant Boy computers - don't panic!

• For a given file, how to add and change file properties on the Details tab, for properties that are not in the properties list?

  Now, I am aware of the modification of the properties of the file is simple in Windows 7 Explorer. Select a file, 'Properties', then tab "Details".  Some are not editable, and that's understandable.  Click on next to any area classified as year, Genre, Publisher, etc. and the apply.  No problems so far.

  Then of course in Explorer, when you right click on a column header, you get several choices of column beyond the usual that is displayed by default; Date, the Type, size, etc.  But, there is an option "More...", which has up to now, MUCH more useful properties to choose from, such as the model project, Department, job statusand so on.

  It's fantastic!

  But when you look into the details of any given file, none of these additional properties even are listed to be edited.  Why offer to view these details, if you don't change them, or add them to different files?  I must be missing something.  I do not need to add my own custom details, this additional list has a choice, that I need; If only I could edit the files to get this info.

  How to add and change these properties to files?  Word, Excel, MP4, AVI, JPG; I would add these properties, so I can set directly in the Solution Explorer, as you would by name or Type.

  Any help would be greatly appreciated!

  My experience is that most of these 'extra fields' no existence not as fields in the directory (folder) itself.  On the contrary, these fields exist in the target file itself. Each file type has its own format and established file except for the types of files that belong to Microsoft, Microsoft cannot control or arbitrarily change the format of a particular file type.

  For example, a ".jpg" file  The format of this file type allows a large number of areas such as comments, Tags, date taken, opening, device manufacturer and so on.  If you go into the properties on a .jpg file, you will see a lot of them and will be able to change.  After changing any of these fields, you will find that the file itself has been changed to contain this information (as can be verified by the parity of the file and to come check upward with a different checksum).  If you display one of these fields in Explorer and 10000 ".jpg" files in this folder, then Explorer must open each of these 10000 files to extract the data in the corresponding fields, you have chosen to display.  May take some time.

  Compare that to the same picture saved to a file ".bmp".  The ".bmp" format has no provisions for any of these fields, so you will not be able to view, save, edit, or sort by them.  If the editable fields are directly related to the type of file that is displayed.

  Microsoft has apparently interviewed a lot of file types and made a compilation of the editable fields in each type of file and the Union of the selected fields in which can be displayed and modified.   That's apparently what you see in the option «More...» ».   So, in summary, the file type determines which fields are available for editing and posting.

  HTH,

  JW

• RoboHelp for Word 7 is not save the rtf and won't compile .hlp

  I use RoboHelp for Word 7 for producing WinHelp files. It has been working fine since several months on this computer.

  Just in the last week, I had a problem with my Word 2007 when you try to open a .doc file. I received the message that the nswrd632.wpc converter was not found. After a search on the Microsoft forums, I edited the registry and saved this converter.

  But now (and which may be unrelated to the Word Converter message) HR will not save the .docx or .rtf file. Whenever I click on save all, nothing happens. When I click project output, the message I need to back up the files, and I click Yes to all. Nothing happens except the message is closed. No files are saved and HR will not end. The only way I can get out of HR is to click on no, which means of course my changes are not saved. I can't save the file menu of Word .docx, either.

  Also, I can not compile the file. Yet once, no error message, just does not compile.

  I searched the Word HR forums, so that I reinstalled RH, made sure HR add-ins are enabled and removed all the .dot files. Nothing works. I went extracted 112 of Peter Grainge and followed the instructions there - no change.

  I found that, after making my changes in the Word document, if I save manually the RTF file by going into the directory Word save slot, the changes will be saved and HR compile the .hlp file - once.

  Any ideas?

  Hi, I have a problem almost identical, except that my project uses rather than .rtf files .doc files. I was able to solve the "unable to save" problem by following the information below. I still have not solved the problem "cannot compile.

  I use Windows XP, RH7 build 100, Office 2007. My project was created by using Office 2003 and I haven't lived all these issues until I recently upgraded to Office 2007.

  This correction was sent to me by guy 'tech' in my group.

  A number of Adobe RoboHelp for Word 7 users have reported that they cannot save the changes or generate output. The issue has been isolated to the RHComAdd.DLL be disabled.

  Check in Word:

  • For versions 2003, go to help | Everything | Disabled items. If RHComAdd.DLL display, re - enable.
  • For Word 2007, click on Office button | Word Options | Macros complementary. Under 'Manage' select disabled items, and then click Go. If RHComAdd.DLL appears, highlight it and turn it back on. (This IS WHAT I DID)

  You can also re - register the DLL. Go to start | Run and type the following line, assuming that you have installed RoboHelp at the default location.

  regsvr32 "C:\Program Files\Adobe\Adobe RoboHelp 7\RoboHELP\RHComAdd.dll"

  How to get off this DLL? The cause was identified as a Word document is open in Internet Explorer rather than in Word.

  This problem has been fixed in version 7.0.2.

  Hope this helps you. I'm still working on the compilation error.

  -Shannon Mooney

• LAST UPDATE FOR EL CAPITAN CANNOT SETTLE DOWN, THE COMPUTER RESTARTS.

  problem 1: I can NOT INSTALL THE LAST UPDATE OF "EL CAPITAN." THE COMPUTER RESTARTS NOT SPONTANEOUSLY OR FORCED.

  BESIDES, MY "FINDER" DOES NOT WORK, NOT TO NOT DISPLAY.

  problem 2: I can NOT INSTALL THE ICLOUD PREMIUM from AMAZON.COM FOR the PHOTOS IN MY MACBOOK PRO.

  problem 3: I want to recover the space in my MacBook Pro by removing ACCESS 'PARALLEL' IF I PUT THE WINDOWS XP AND WINDOWS 7.

  PROBLEM 4: I WANT TO 'CLEAN UP' MY MACBOOK PRO TO RECOVER THE SPACE. I USED TO HAVE 'MACKEEPER' BUT I AM TIRED OF PAYING FOR UPGRADES.

  PROBLEM 5: WHAT IS THE WAY OF EASIIEST TO SEN IMAGES TO THE ICLOUD. I NOTICED THAT TAKES TOO MUCH TIME AND I CAN NOT CHOOSE "ALL PHOTOS" TO BE SENT TO THE ICLOUD SO I CAN DELETE THEM THE PHONE AND THE MACBOOK PRO. "

  THANKS FOR ANY HELP.

  PEDRO

  AKA Dr.Hdz

  Answer 1: Try to restart the computer by pressing command + R. This should start the mac in recovery mode and will allow you to reinstall OS X (don't worry it'll only reinstall the operating system, your files will not be deleted)

  Answer 2: Can elaborate you more on what is the iCloud premium Amazon.com for photos? I've never heard of this, what error do you get?

  Answer 3: Open Bootcamp Wizard and choose the option "Remove Windows 7/XP"

  Answer 4: Mackeeper is ransomware. AKA. a scam, don't pay for it. You can use tools such as OmniDiskSweeper, which is free and shows you what are the elements take place on your mac so that you can delete what you don't want.

  Answer 5: If you have iCloud library activated under iCloud, then your images will be automatically uploaded to iCloud and equipment associated with your Apple ID.

  I would like to know if this helped you / resolved questions. Thank you!

• Lockout C drive. Cannot change the permissions, cannot not disable the user account control, unable to open the access control editor, cannot change the property.

  While trying to change the folder permissions for a second user on my computer, I did something that I lock my C drive.

  When I log in with the administrator account, I get the following popup:

  C:\Windows\System32\SystemPropertiesComputerName.exe
  Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  I am not able to access denied drive from C to all 'access '.

  When I right click on the C drive and select Properties > Security tab > go on, said the popup "cannot open the access control editor. Access is denied. »

  When you select Properties > Security tab > advanced > owner tab > continue, current owner says "unable to display current owner. Can not change, cannot be changed.

  I can't turn off user account control, nothing happens when I click the icon or the text.

  I was able to create the 'hidden' administrator account, but I can't do anything from there, either.

  Any suggestions?

  Hello

  Recovery disk will not help you perform the upgrade on the spot. I suggest to organise a Windows Vista DVD and try to perform the upgrade in-place.

• Can hear his only, can not see the video when playing wmv files received by e-mail

  Original title: wmv files

  I receive emails with extension of wmv file, but cannot hear the sound.  I need to download and where?

   
  Hi 123lj,
   
  1. what program you use to play wmv files?
  
  If you use Windows Media Player to play the file, then try these steps and check the result.
  Step 1: Check Windows Media Player video playback settings
  a. Click Start, type of media player, and then click Windows Media Player.
  b. click the ALT on the keyboard to display Tools menu, click Options.
  c. click on the performance tab.
  d. under reading video and DVD, check if "Enable DirectX Video Acceleration for WMV files" is selected. If this is not the case, then select it.
  e. click ok to apply the changes.
  f. close media player and check the result.
   
  Step 2: Check the updates of Windows to see if there is an update available for your video card
  a. see question ' "what types of updates can Windows install automatically?".
  b. follow the instructions to install the update of the driver.
   
  Step 3: If your driver software update does not resolve the problem, try to reduce (or turn off) video hardware acceleration by following these steps.
  a. open display settings by clicking the Start button, clicking Control Panel, on appearance and customization, personalization, and then clicking display settings.
  b. click Advanced settings, click the Troubleshooting tab and then click on change settings.
  Note: some video card drivers do not allow allows you to change the settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
   
  See Read an audio or video file: frequently asked questions
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Forms work well in 10 of Forms Builder but not in the OAS 10 G

  Hello
  
  My forms work well in Forms Builder (Developer Suite 10 G), but not in the OAS 10 G release 2.
  
  I installed OAS 10 G release 2 on CentOS (infrastructure services + forms and reports).
  
  I started the application with
  http://172.19.3.200:7778/forms/frmservlet? config = asdfg
  
  Form of Star ok but does not run any command.
  
  For example, I put a simple command to trigger a TIME NEW FORM INSTANCE
  message ('ABC');
  
  
  Nothing happened and no error in the form.
  
  I can't check any log file?
  
  Please any suggestion
  Thank you

  My forms work well in Forms Builder (Developer Suite 10 G), but not in the OAS 10 G release 2.

  I installed OAS 10 G release 2 on CentOS (infrastructure services + forms & reports).

  Developer Suite is installed on a Windows computer? If Yes, then 2 questions:

  1. how to transfer your forms for CentOS?

  2. don't you recompile forms on CentOS?

• Former owner will not take the time to remove his ACCT. I have his name, number, address, serial number, imei of the device. I've added it to my Verizon plan. I can't activate it! Apple won't help me but him?

  Former owner is not the time to remove the device from his account. I have his name, number, address, serial number and imei of iphone.  I always had of BONE cell phones, but my daughter IOS. I made sure that the IMEI was clean and it was not on the black list before adding it to my Verizon account. Now, I learned about icloud.  Verizon has brought his number to the iphone and now she has no phone to use. I called apple, but I was told that they could not help me, but they might help the original owner.  They original owner is older and perhaps confused after I tried to explain what I've learned.  What can I do when the original owner is/was/still confused about how the system works?  I'm always lost in this world of apple.

  It sounds as if this iPhone is locked in Activation.  Here is the complete description of locking Activation:

  Find my iPhone Activation Lock - Apple Support

  Assuming that the former owner is ready (but simply not able) to help you, maybe if you contact the owner and his or her through the directions above, you'll be all set.

• Outlook for Mac 2016 Question - not color the backgrounds of emails - no response from MS

  Can I add background color to an e-mail message in outlook 2016 for mac? As a solid green or yellow, for example? I can't in 2011 using the tab options. Which is available in 2016 to Outlook for Mac?

  No indication of support for MS and Google comes to nothing... Maybe some poor soul like me uses MS Outlook 2016 and knows.

  I'm still in 2011 (as part of 365) but have a client who pays me a lot of $$$ but is visually impaired and needs a dark background and a red font. Don't want to upgrade until I know the answer.

  Any response - mucho appreciated!

  Hello

  In 2016 to Outlook for Mac, it is not possible using option, click on the smiley and send feedback to Microsoft.

  You can do this manually, but it is not perfect.

  Select the text, and then click text ☞ of red color.

  After that, click Highlightng ☞ of black color.

  

• Apps for Universal Crossword does not recognize the server.

  I use an Officejet Pro 8500 a and Windows 7 on a wireless network. I downloaded a few applications of ePrint. Other applications work very well, "(Proposals) Forms', 'News '. Software Universal Crossword doesnot function in I get an error message "the printer could not connect to the server." Y at - it a problem with this App that don't have any others?

  Hi jcope10248. This error is specific to the printer, connecting to web services and not necessarily the application itself. I recommend you contact HP Cloud services @1-855-785-2777 since they will have real time information about the service. The number is free of charge and the service is free and requires that your printer is in warranty.