Pathfinder will unite all the objects on each layer

Similar Questions

• Help!  All the objects on a layer are framed in red

  I'm in the middle of a picture and all of a sudden all the objects on a layer are framed in red.  These aren't the stroke, but rather it is as if I am the display mode overview and overview at the same time.  I searched the forums, but I can't find anything that looks like what I see.

  You use maybe plug-ins? Which?

  Is one of the layers has a appearance which causes the stroke to appear? You can see in the target symbol

• Can I move all the objects again selected layer without clicking hundreds of layer bars?

  I'm working on a complex illustrator file generated by GIS software. He gave me all kinds of groups of clip & road clip - what I really need, it's just to put all the same coloured polygons on the layer of a high level (unfortunately I can't draw all of my polygons in a group because illustrator doesn't pull these objects out of their existing clipping groups, and the card gets screwed completely upward if I release the clipping masks. With simple cards I have no problem Direct by selecting all of the polygons, I want, selecting their layers in the layers panel, then moving them to a new layer. This card is too complex, because there are hundreds of objects and hundreds of corresponding layers (they are not contiguous, or else I could simply click can be done with it).

  
  

  I used select > same > fill type to select all the polygons, I want that on a single layer, but I really hope that I don't have to select all the layers for each item one by one before I can move them to a new higher level layer. Does anyone know if there is a way to moving all the objects in a new layer selected without having to actually click all the layers in the Panel? Completely open to the alternative routes to my desired result!

  
  

  Thank you very much.
  
  

  Of course, after making the selection drag selection (to the right of the layer) icon on the desired layer. This will move any selected layer to the new layer.

  

• My kodakESP5 will not print all the object I want to print only a part of it

  My kodak ESP5 will not print all the object I want to print only a part of it

  Hi jakenny,

  You may need to replace an ink or toner cartridge. Check the status information in the queue for low ink or toner messages. If the printer has a status or display area, you can also check for low ink or toner messages on the printer itself. For more information, see change an ink or toner cartridge and view the print queue.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  See the link below and check the print settings.

  Choose printing options

  http://Windows.Microsoft.com/en-us/Windows-Vista/choosing-print-options

  Method 2:

  Try to update the printer driver which might help you resolve the issue.

  Click on the link below for more information on the updated printer drivers.

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Check whether the problem is resolved.

  For more information, please see the link below.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Try to find all THE objects that point to a column...

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  PL/SQL Release 11.2.0.3.0 - Production
  CORE Production 11.2.0.3.0
  AMT for Solaris: 11.2.0.3.0 - Production Version
  NLSRTL Version 11.2.0.3.0 - Production
  
  
  
  I have several patterns, all that have tons of objects that point to a column in a table.
  I tried looking at v$ sqltext and v$ sqlarea, but it does not appear as expected.
  
  There is a view that I can watch that will show me all the objects that relate to a single column?
  
  my situation. Had to change the structure of data in this one column. Changed the default value of a Y a l I have packages, functions, triggers, etc... dealing with this single column. I make sure I have go through EACH of them and modify them to reflect the change in the column of the table. And still, it extends over several patterns that point to it.
  
  I can't forget all the objects. Is there any one place to find it?
  
  Thank you.

  Use the mode - DBA_DEPENDENCIES

  select * from dba_dependencies
  where type= 'TABLE'
  and name = '';
  

  Another gross way...

  select * from all_source
  where lower(text) like lower('%%')
  group by owner,name,type;
  

  But, this will not search in the views & MView queries.

  HTH
  Vanessa B.

  Published by: Vanessa B on October 15, 2012 23:09
  -added

• Update 25.0.1 (Mac) a total disaster. Break all THE CSS on each site. Have WTF you done? You MUST have links go down, if not, hasta the vista.

  Update 25.0.1 (Mac) a total disaster. Break all THE CSS on each site. Have WTF you done? You MUST have links go down, if not, effyou, hasta the vista.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• I don't see Smart Guides around all the objects on the artboard even if the guides are checked in view

  Hello

  First of all, I don't pretend to be some illustrator expert but I have a good understanding of the functions of Adobe Illustrator key.

  However, when I went to design a logo yesterday, I don't see smart guides (blue lines, see below with all selected items) around all the objects on the artboard even if the guides are checked in order. I do not expect the controls on each being showing unless they are selected, but I do that I expect to see the blue line itself.

  
  

  
  

  I contacted the Adobe Illustrator Chat but really, they do not seem to have a clue and seemed to be intentionally misunderstanding me despite the fact that I sent this image. They were also quite rude!

  In any case, I'm now desperate so someone here can help me please.

  Thank you very much

  Mike

  PS I looked everywhere online for a solution and tried some of those suggested but without success.

  You may not see an unselected object with no line or fill in preview mode (this is why it is called overview).

  You can select it when you don't have fill and stroke in the tools Panel and choose: select > same > background & contour.

• Release of anchor all the objects/text images

  Dear all,

  It's my 1st question on AC (Adobe Community), so I'll explain what I need here in details and excuse me my little or even none experienced in coding, especially in Javascript.

  I have a book with many INDD files, these files have a lot of images and objects and text blocks are anchored to the main text area.

  I searched on AC for the way to free him from all my anchored object and the main text block text block. so I found the average script.

  I found her name "ReleaseAnyAnchor" created by 'Dave Saunders' to release the anchored object (graphics, text, else) but one by one. and it will take too much time to free myself from all the objects on the book. (the Script code is below)

  //DESCRIPTION: Release Inline & Anchored Items
  //Written by Dave Saunders, released on indesignsecrets.com
  
  
  (function() {
    if (app.documents.length > 0 && // must be a document open
    app.selection.length == 1 && // selection must be of single item
    app.selection[0].parent instanceof Character) { // selection must be anchored
    if (parseFloat(app.version) < 6) {
    releaseMe(app.selection[0]);
    } else {
    app.doScript(releaseMe, undefined, app.selection[0], UndoModes.entireScript, "Release Any Anchor");
    }
    } else {
    alert("Please select an inline item.");
    }
  
  
    function releaseMe(myPI) {
    var yePage = findPage(myPI);
    var startBounds = myPI.geometricBounds;
    myPI.anchoredObjectSettings.anchoredPosition = AnchorPosition.anchored;
    myPI.anchoredObjectSettings.releaseAnchoredObject();
    if (yePage != null) {
    myPI.move(yePage);
    }
    myPI.move([startBounds[1], startBounds[0]]);
    }
  
  
    function findPage(theObj) {
    if (theObj.hasOwnProperty("baseline")) {
    theObj = theObj.parentTextFrames[0];
    }
    while (theObj != null) {
    if (theObj.hasOwnProperty("parentPage")) return theObj.parentPage;
    var whatIsIt = theObj.constructor;
    switch (whatIsIt) {
    case Page : return theObj;
    case Character : theObj = theObj.parentTextFrames[0]; break;
    case Cell : theObj = theObj.insertionPoints[0].parentTextFrames[0]; break;
    case Note : ; case Footnote : theObj = theObj.storyOffset; break;
    case Application : return null;
    }
    if (theObj == null) return null;
    theObj = theObj.parent;
    }
    return theObj
    } // end findPage
  
  
  }());
  

  
  

  also, I found another script which release all of the graphic objects, but not objects of text frame. (I get it from AC, but I remember exactly the place where.)

  
  

  if(app.documents.length!=0) {
      var ad = app.activeDocument;
      var pgit = ad.pageItems;
      var pgitlg = pgit.length;
      var objprocessed = 0;
      if(pgitlg !=0)
      {
          for(i=0; i<pgitlg; i++)
          {
              if(pgit[i].getElements()[0].constructor.name == "TextFrame")
              {
                  var tfg = pgit[i].allGraphics;
                  var tfglg = tfg.length;
                  for(j=0; j<tfglg; j++)
                  {
                      var rec = tfg[j].parent;
                      rec.anchoredObjectSettings.releaseAnchoredObject();
                  }
              }
          }
      }
  }
  

  
  

  all codes work well for me, but I need to try to merge or make a new code [as I mentioned that I don't have experiences in JS, so I do not know how to compile a new code that do the 2 steps of the 2 codes.]

  
  

  my request is, could you please help me to do this new code, or merge to compile a new code in the new file.

  
  

  I saw this topic releasing objects anchored and want to make a new script.

  
  

  Please try to help me as soon as POSSIBLE because I need this script to all my object anchored to begin working on the output file.

  
  

  I need the code works on any version of INDESIGN.

  
  

  Thanks guys, waiting for you.

  
  

  AMR
  

  AHA. If you need test whether a line is an anchor. If this is the case, use. releaseAnchoredObject(), if it is not, the simplest is to make an anchor, then release it:

  if (pageItems[i].parent instanceof Character) {
      if (pageItems[i].anchoredObjectSettings.anchoredPosition !== AnchorPosition.ANCHORED) {
          pageItems[i].anchoredObjectSettings.anchoredPosition = AnchorPosition.ANCHORED;
      }
      pageItems[i].anchoredObjectSettings.releaseAnchoredObject();
  }
  

  It works, but I don't know if the results are what you're after.

  Peter

• For all the records for each record double, I need to get a single column with null or 0.

  Hi all

  I have a requirement where I need to get all the records, for each record in double, I need to get a single column with null or 0.

  create table a1

  (

  Identification number,

  VARCHAR2 (100), the point

  part varchar2 (100));

  Insert into a1

  values (1, 'ABC', 'A1');

  Insert into a1

  values (2, 'DEF', 'A2');

  TABLE A

  PART ITEM ID

  1 ABC A1

  1 ABC A1

  1 ABC A1

  DEF 2 A2

  DEF 2 A2

  3 DEF A2

  O/P

  PART ITEM ID

  1 ABC A1

  1        ABC             0

  1        ABC             0

  DEF 2 A2

  2       DEF              0

  3       DEF              0

  Thanks in advance.

  Thanks for your help FrankKalush...

  This one will work.

  WITH got_r_num AS

  (

  SELECT NVL (a1.id, a1.id) as id

  NVL (a1.item, a1.item) AS element

  NVL (a1.part, a1.part) IN the framework

  a1.id AS a_id

  ROW_NUMBER () OVER (PARTITION BY a1.id

  ORDER BY NULL

  ) AS r_num

  BY the a1

  )

  SELECT id

  element

  CASE

  WHEN a_id IS NOT NULL

  AND r_num = 1

  THEN part

  ELSE ' 0'

  END in the framework

  OF got_r_num

  ;

• Transparently adding a criterion to all the objects in an application view

  Hi all
  
  We are migrating an application based on the forms in Oracle ADF and JDeveloper 11 g R2.
  
  In our application Forms, we add transparent business to all the blocks of data code where clause property by using the following expression: company_code = SYS_CONTEXT('erp$security_mgmt_ctx','company'). How this can be achieved in Oracle JDeveloper and Oracle ADF.
  
  Any help will be much appreciated.
  
  Thank you
  Bilal

  Hello

  You can have a method on the AOS, that is the place where clause to the view of all the objects and run the query.

  Ex:

  public void setWhereClause2AllVOs(String compName){
  this.getVO1().setWhereClause("='" + compName + "'");
  this.getVO1().executeQuery();
  this.getVO2().setWhereClause("='" + compName + "'");
  this.getVO2().executeQuery();
  .....
  }
  

  You can call this method at the start (e.g. as an activity in your workflow by default methodCall)

  Arun-

• Select all the objects with 2pt STROKE?

  It is possible to select all objects with a particular characteristic, such as a specific line width? I know I can do this by selecting an object, and then choose Select all. But I want to include as part of a batch action, so I need to be able to specify the choice so that it can be completely automated. If I have to choose one of the objects for each file, it defeats the purpose of the action of batch processing.

  If this is not possible, I should ask in the forum script to help a script?

  NW

  With nothing selected, the value of the weight of the 2pt race. Now select > same > weight of the race.

  Set the weight of the race is registrable and if nothing is selected, then select it > same commands using what is defined in the panels.

• (1) is there a function for all the object of the same size?

  (1) is there a function for all the object of the same size?

  Sorry, I thought you wanted to align the objects.

  We do not have the function to make items of the same size. You must change one by one. To change the .lks file may be more effective.

• Keypad lock, when you press the keys, you hear a ding (chime) but it will type all the letters. The mouse still works. When you restart it works fine.

  Keypad lock, when you press the keys, you hear a ding (chime) but it will type all the letters. The mouse still works. When you restart it works fine. It must be a sequence of keys... but I have no idea what it could be. Thank you and God bless you

  Hello
  When exactly the problem occur?
   
  Follow the steps below and check if that helps.
   
  Step 1:
   
  Test the issue in safe mode and check if the keyboard is blocked.
   
  Step 2:
   
  If your computer very well in Safe Mode functions, you can put your system to boot and check if any third party or any service application is causing the problem and therefore the computer to freeze.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you can go ahead and disable or uninstall the same.
   
  Once the system is in a clean boot state, check if the computer continues to block or not.
   
  See the link below for more details:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• My ORB start does not, he will have all the features and the icon disappear, just to the left of the word it

  My ORB start does not, he will have all the features and the icon disappear, just to the left of the word it

  even using restore window can not solve the problem, I use windows 7 pro, this happen after the update I have install on September 24, 2012

  Hello

  1. What is the KB (Knowledge Base) number associated with the update?

  2. the problem persists only with ORB start?

  Method 1: Make the SFC (System File Checker) scan and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 2: Use the Microsoft Safety Scanner in full scan mode and remove all threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Hope this information helps.

• Receptive Slide height develops all the objects on the slide master background.

  Hey,.

  If I build a sensitive project and slides, I need to unlock the height of the slide in mobile mode on some slides to create a scrolling to display more content.

  When I adjust the height of the blade, it develops all the objects in the background of the slide (my header, title...). These elements are not merged.

  Is there anyway that I can adjust the height of the blade so that it is not developing all the objects on the slide, only the backdrop (i.e. the white canvas). I try to use a model of slides for content pages.

  Or is the only way around it to create a number of different slide masters with heights of slide?

  See you soon

  Hello

  I feel your pain. I struggled with this for a long time, but finally found a solution.

  If you want to extend the height of the blade, creating a scroll bar. But you want certain elements to stretch and others do not.

  
  

  Object to Extensible NOT / Static

  • Create in the Slide Master
  • Set the properties top and % Relative height.

  Stretch/dynamic objects

  • Create directly in slide film
  • Set the Top % Relative property
  • Set the Height property for % (not related).

  I recommend to create a slide film finalized and then duplicate this slide for all other instances.

  Let me know if it works.