Pause a VI and results

I would like to run a VI. The runtime than VI I need to get the exact real-time computer, RT (start). I also give a time interval T (int) = 2 minutes. I want to check all the time (at the time during the VI is running) if the real time of the RT (present) computer = RT (begin) + T (int).

If that's true then I stop the vi. How is it possible. ? I tried to get the time on the computer, but it is in the string format and it is not possible to add or subtract and check the status. I also tried with a count of ticks function but is not wrking. Any ideas... See attachment

Here you go

/ David

Tags: NI Software

Similar Questions

Notification is not sent to the role, activity of Notification status is "Complete" and result of the activity is "strength".

Hi all
I have a custom workflow that works very well and a requirement came to send the notification to a list of users after a certain activity is done. To achieve this,
(1) I created notification and the attributes that are required,message.
(2) I am creating a special role and assigning users before you initialize the workflow process, and this role is assigned to a type of role attribute that has been defined as the interpreter of the notification.
When the workflow starts, the activity of notification is not sent to the role while its status is showing as 'Done' and result of the activity is showing that the 'Force' when the workflow process is completed.
Note: Creating ad hoc-role and assign to users happen correctly, other notifications are bring sent to the respective recipients. Only the newly introduced notification does not work properly.
Could you help me with this?

Hi all

I have fixed this problem.

When I made the changes first, I kept the attribute type of the special role as text instead of role and I transferred it in the database using WFLOAD and I was faced with the issue of the notice, then I realized and changed the type of the role attribute and loaded in DB using WFLOAD command This time, only the changes are not stored in the DB and I faced the question again. So I thought that associates other issue and therefore posted in this forum (apologies for that).

Yet once, I saved directly turns him into DB instead of load using WFLOAD, now it works fine.

Kind regards

K. Kumar

Does anyone know how to customize (aesthetically), BC search and results in muse?

I created my site within the muse and used the search function of business catalyst and it works, however I wanted to customize how the search bar and results appear as they look broken. Any help would be appreciated!
Search page
[Moved from the endorsement, general, all Adobe forums Lounge for a specific product - Mod support forum]

I suggest that you contact the catalyst for business team, for advice on your support issue.

Here is a link to their contact - contact us | Adobe Business Catalyst

Thank you

Ankush

How long does take to load lightroom? and how to pause the download and start later?

How long does take to load lightroom? and how to pause the download and start later?

Hi AdobeIDBailey,

The time required to download the product depends on the speed of your internet connection.

The download cannot be suspended once launched, it will stop when you are finished, or if you cancel it.

If you see it is stuck or not moving not quite so if please cancel the download and refer to the steps below and try the download again: (these steps will also increase the speed of downloading as security software can also slow your downloads)

1. turn OFF any security software or firewall installed on your machine temporarily

2 - CUT the browser protection tools or add as well as for now.

Let us know if that helps.

result of the difference between the message of exception and results of VisaStatusCode

Hello

first time poster here. Everything has started to learn the ins and outs of instrument control.

I have been using Visual Studio 2010 to create a c# program to set up and use an instrument of digital power meter
(via USB connection), and I noticed that send a defective Query() (on purpose) to an instrument will result in a
exception (as expected). Specifically "timeout expired before the operation is completed. Code error-1073807339 (0xBFFF0015), ErrorTimeout of VISA"

For communication with the instrument, I use the following library: NationalInstruments.VisaNS

But when I use VisaStatusCode (LastStatus) in making the exception, to see if it gives the same error code.
It only returns the 'success'

The exception error message includes everything I need, but I was wondering why I get a different result.

The LastStatus value isn't supposed to be used for that? Can anyone suggest what is happening here?

DMA2100 pause, fast forward and resume won't work with video files.

Hello

I have the extender DMA2100 working with and Win7 media center movies streaming absolutely perfect. The problem I get is when I try to pause for more than a few minutes or go out to a movie and try and resume, which until the beginning of the film! It's so frustrating to anyone can help?

Hi Scottking69,

There are questions about the compatibility of Windows 7 and DMA (as a few years ago). Linksys/Cisco, it has been verified that it is NOT officially supported. But some do work but not at full capacity. Hope that this would settle the question whether it is supported or not.

See you soon!

pause on video and a buzzing sound on audia to

While playing games or listening to music there is a slight pause, and then a buzz kind of sound on the speakers. also very pregnant hail sounding in the laptop.

Hi Bill,

Thank you for your response.

Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8.

http://support.Microsoft.com/kb/929135

Note: please go through the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

I hope this helps.

Activation of Hyper-V and results in a hung system restarting...

Hello

I have a HP Envy 23 all-in-one desktop computer with processor Core i7 and 8 GB of RAM. It came with pre-installed Windows 8 (x 64) home.

I upgraded to Windows 8 Pro (x 64) and activated the Hyper-V feature (Tools for managing Hyper-V and Hyper-V platform). After you add the feature, the system prompted me to restart for the changes to take effect.

However, after reboot, the system is not come upward (the screen is empty) - I thought I'll leave the system to do anything, he was. The next morning, the screen was always empty even though the system has been powered and was not admissible.

Turn off the system and turn back brought the system in diagnostic auto mode - auto repair has failed and I had to restore the system to a previous restore point.

Once connected, I returned the dialog box add features and noticed that the Hyper-V check box is now disabled and all the icons for Hyper-V splash screen disappeared.

I tried to add the Hyper-V feature again and the result was the same. No idea what could be wrong here?

Thank you

AJ

Note: I turn on the hardware support for virtualization in the BIOS.

Note 2: Here's the CoreInfo dump:

Intel Core i7 - 3770 S CPU @ 3.10 GHz
Intel64 family 6 model 58 Stepping 9 GenuineIntel
HTT * Hyperthreading enabled
HYPERVISOR - hypervisor is present
VMX * virtualization to support supports Intel
SVM - Supports AMD hardware support for virtualization
EM64T * support 64-bit mode

SMX * Supports Intel trusted execution
SKINIT - Supports AMD SKINIT

NX * Supports non-performance page protection
RID * supports the DEP to the supervisor Mode
SMAP - Media supervisor Mode access prevention
PAGE1GB - supports large pages of 1 GB
EAP * supports physical addresses > 32 - bit
PAT * supports the attribute Page of table
PSE * supports 4 MB pages
Pse36 * support > 32 - bit address 4 MB pages
EMP * ILO global media in the table on page
SS * bus media snooping for cache operations
VME * Supports virtual-8086 mode
RDWRFSGSBASE * takes direct charge of the basic GS/FS access

FPU * implements i387 floating point instructions
MMX * Supports MMX instructions
MMXEXT - MMX AMD Implements extensions
3DNow - Supports 3DNow! instructions
3DNOWEXT - Supports 3DNow! extension instructions
SSE * supports the Streaming SIMD Extensions
SSE2 * supports Streaming SIMD Extensions 2
SSE3 * supports Streaming SIMD Extensions 3
SSSE3 * supports SIMD Extensions additional 3
SSE4.1 * supports the Streaming SIMD Extensions 4.1
SSE4.2 * supports the Streaming SIMD Extensions 4.2

AES * extensions support AES
AVX * extensions intruction media AVX
FMA - supports the FMA using State YMM extensions
MSR * Implements RDMSR/WRMSR instructions
MTRR * Supports Memory Type Range registers
XSAVE * Supports XSAVE/XRSTOR instructions
OSXSAVE * media XSETBV/XGETBV instructions
RDRAND * instruction supports RDRAND
RDSEED - supports instructions RDSEED

CMOV * instruction supports CMOVcc
CLFSH * instruction CLFLUSH media
CX8 * media compare and Exchange 8 bytes instructions
Cx16 * instruction CMPXCHG16B support
BMI1 - Media bit manipulation extensions 1
BMI2 - Media bit maniuplation extensions 2
ADX - instructions of media ADCX/ADOX
DCA - prefetch, supports mapped in memory devices
F16C * supports education of half-precision
FXSR * instructions media FXSAVE/FXSTOR
FFXSR - support optimized instruction FXSAVE/FSRSTOR
MONITOR * media MONITOR and MWAIT instructions
Supports the MOVBE - MOVBE instruction
ERMSB * improved support of the REP MOVSB/STOSB
PCLULDQ * instruction supports PCLMULDQ
POPCNT * instruction POPCNT media
MS * supports fast system call instructions
LAHF and SAHF * media LAHF/SAHF instructions in 64-bit mode
HLE - instructions brackets Hardware Lock elision
RTM - instructions of holders of limited transactional memory

OF * breakpoints of e/s including CR4.DE support
DTES64 * can write the history of branches of 64-bit addresses
DS * Implements debugging residing in the buffer
DS - CPL * function Supports Debug Store with CPL
CCDI * media PCIDs and definable CR4. PCIDE
INVPCID - supports instructions INVPCID
PDCM * supports the capabilities of Performance, MSR
RDTSCP * RDTSCP media statement
TSC * instruction RDTSC media
TSC-DEADLINE * APIC Local supports the time of one-shot timer
TSC-INVARIANT * TSC rotates at constant speed
Cx16 * supports disabling special priority messages

EIST * Supports Enhanced Intel Speedstep
ACPI * Implements MSR for power management
TM * implements a circuit thermal monitor
TM2 * control Implements Thermal Monitor 2
APIC * implements the local APIC accessible by software
x2apic * Supports x2APIC

CNXT-ID - Adaptive L1 data cache or BIOS mode

MCE * media Machine Check, INT18 and CR4. MCE
MCA * Implements Machine Check Architecture
PBE * supports the use of FFF #/ PBE # pin

PSN - serial number of processor Implements 96 bits

PREFETCHW * statement supports PREFETCHW

Physical logical processor board:
* - Physical processor 0 (Hyperthreaded)
-* - Physical processor 1 (Hyperthreaded)
-* - Physical processor 2 (Hyperthreaded)
-* Physical CPU (hyperthreading) 3

Processor Socket logic board:
Socket 0

Logical processor of card NUMA node:
NUMA node 0

Logical processor to Cache map:
* - Cached data 0, level 1, 32 k, Assoc 8, LineSize 64
* - Instruction cache 0, level 1, 32 k, Assoc 8, LineSize 64
* - Unified cache 0, level 2, 256 KB, LineSize 64, Assoc 8
Unified cache 1, level 3, 8Mo, Assoc 16, LineSize 64
-* - Data Cache 1, level 1, 32 k, Assoc 8, LineSize 64
-* - Instruction cache 1, level 1, 32 k, Assoc 8, LineSize 64
-* - Unified cache 2, level 2, 256 KB, LineSize 64, Assoc 8
-* - Data Cache 2, level 1, 32 k, Assoc 8, LineSize 64
-* - Instruction cache 2, level 1, 32 k, Assoc 8, LineSize 64
-* - Unified cache 3, level 2, 256 KB, LineSize 64, Assoc 8
-* Data in Cache 3, level 1, 32 k, Assoc 8, LineSize 64
-* Instruction cache 3, level 1, 32 k, Assoc 8, LineSize 64
-* Unified cache 4, level 2, 256 KB, LineSize 64, Assoc 8

Logical processor in the group mapping:
Group 0

Hello

The question of "to enable Hyper-V" is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

Please post your question in the Technet Forum.

You can follow this link to ask your question:

http://social.technet.Microsoft.com/forums/en-us/category/w8itpro

If you need further assistance, please answer and we will be happy to help you.

Search result HIS Oracle - Alternate keywords and results relevancy Score

Hello
Specifications:
Jdev: 11.1.1.7
WebCenter Portal: 11.1.1.8
Oracle ITS: 11.2.2.2
Oracle Webcenter is integrated with ITS Oracle to provide search results.
We use taskflow Search-Toolbar and try to customize it to meet our requirements.
We want to get other keywords for the search queries and score and relevance Score for the results returned by the query, but unfortunately could not find this attribute in the object #{line} which is used by searchResults.jsff.
We have configured ITS to provide keywords replacing / dictionary for misspelled words and we can see in the console of OOB query provided by Oracle SES.
In addition, if we use search_client.jar and create a proxy with WSDL URI provided for the operation of "doOracleSimpleSearch", we can get the OracleSeachResult object in our java class that gives replacing keywords and the Score of the search result. But we find not just where to get in our taskflow.
Kindly help us get these above mentioned attributes in the Search-Toolbar taskflow or SearchResult.jsff (where the results are displayed)
Kind regards
Siddharth

Hello.

There are no keywords replacing ITS adapter with the default WebCenter portal integration.

You may want to consider one of the following approaches:
- Create a Helper Managed Bean or a data control that executes the query or ask the search API to retrieve the altWords. Include this output in the results of the research task workflow customizations. In addition, you can draw these altWords using the rah: resourceActionBehaviour to repeat the query using the altWord.
- Create your own page of search results using the search client API. I always try to use this approach from the outset because WebCenter research is too limited for the major customizations.
- Open a request for a development of Oracle Oracle-SR request.
Solution 1 requires a high level of skills WebCenter/ADF.

Solution 2 requires time.

I hope this helps.

Kind regards.

Custom button play/pause break drag-and - d├⌐poser? Captivate 9

Hello
I'm working on a sensitive project and everything was fine.
But after I created a play/pause button custom fiscal drag - d├⌐poser has stopped working. The moveable objects appear but they can´t be dragged / cursor doesn´t change.
Advanced reading action button simply checks to see if the project is paused (by changing the image on the play button) or else (change the button to another State and continuation of the project).
How could this advanced break action slide it / move?
Thanks for any help!

A user variable must be created. You can give it a default value of 0 on creation. For the rest, you just use the same way you used the other buttons to toggle. For a user variable that it is you who decide what values it may have, you can set it is a Boolean value, but if you use the toggle command, it will automatically change the value of 1 if it is 0, or 0 if it is 1.

You have seen the conditional action (Toggler) in this article.

Most of the books and (certainly) Lynda tutorials are quite limited, sorry to say.

Oracle how to multiply two columns of different tables and results

Oracle how to multiply two columns of different tables and get the result in the third column?

I want to multiply all the lines of the quantinty column in the table of quantity with the relevant lines of the table of prices price column and get the result of multiplying in the third column. What should I use procedure trigerr? OR IS IT POSSIBLE HOW TO DO IT PLEASE HELP :D

Edited by: 994229 2013-03-15 12:44

/* Formatted on 3/15/2013 3:51:08 PM (QP5 v5.185.11230.41888) */
CREATE TABLE mytable1
AS
   (SELECT 1 id, 5 VALUE FROM DUAL
    UNION ALL
    SELECT 2, 7 FROM DUAL
    UNION ALL
    SELECT 3, 8 FROM DUAL);

CREATE TABLE mytable2
AS
   (SELECT 1 id, 4 VALUE FROM DUAL
    UNION ALL
    SELECT 2, 12 FROM DUAL
    UNION ALL
    SELECT 10, 12 FROM DUAL);

  SELECT id,
         mytable1.VALUE,
         mytable2.VALUE,
         mytable1.VALUE * mytable2.VALUE product
    FROM mytable1 FULL OUTER JOIN mytable2 USING (id)
ORDER BY id;

ID     VALUE     VALUE_1     PRODUCT
1     5     4     20
2     7     12     84
3     8
10          12

Separate values for the pre-treatment and results of the comprehensive review (without using the PL/SQL)

Hi people,
This year was difficult because it does not clearly justify what I want to achieve. The main reason for me to try this approach is to reduce the time of the performance. I have my program works very well, but since it accesses a view for each student, slows down the performance.

Purpose of this report: Show all Dates of examination for students, but only to display the results pre and review of the overall assessment on the first line for students.

Table scripts and INSERT statements:

create table STUDENT_TB(student_id varchar2(4), last_name varchar2(20), first_name varchar2(20), evaluation_date date);
create table EXAM_TB(student_id varchar2(4), exam_date date, result number);
create table EVALUATION_TB(student_id varchar2(4), eval_flag varchar2(1), sampling_date date);

insert into STUDENT_TB values('1001', 'Poppins', 'Mary', to_date('27-SEP-2012', 'DD-MON-YYYY'));
 
insert into EXAM_TB values('1001', to_date('20-APR-2011', 'DD-MON-YYYY'), 30);
insert into EXAM_TB values('1001', to_date('20-MAY-2012', 'DD-MON-YYYY'), 39);
insert into EXAM_TB values('1001', to_date('10-JUL-2012', 'DD-MON-YYYY'), 34);
insert into EXAM_TB values('1001', to_date('10-SEP-2012', 'DD-MON-YYYY'), 39);
insert into EXAM_TB values('1001', to_date('01-DEC-2012', 'DD-MON-YYYY'), 82);
 
insert into evaluation_tb values('1001', null, to_date('22-APR-2011', 'DD-MON-YYYY'));
insert into evaluation_tb values('1001', 'N', to_date('20-JUL-2012', 'DD-MON-YYYY'));
insert into EVALUATION_TB values('1001', 'Y', to_date('10-DEC-2012', 'DD-MON-YYYY'));

Desired output:

SID     Last Name   First Name   Evaluation Date    Exam Date   Results   Order   Pre Evaluation   Overall Evaluation   Accept?
===============================================================================================================================
1001     Poppins         Mary      27-SEP-12         20-APR-11     30       1           N                       Y            Y
1001     Poppins         Mary      27-SEP-12         20-MAY-12     39       2
1001     Poppins         Mary      27-SEP-12         10-JUL-12     34       3
1001     Poppins         Mary      27-SEP-12         10-SEP-12     39       4
1001     Poppins         Mary      27-SEP-12         01-DEC-12     82       5

Business rules:
The Pre, global assessment and accept it? fields are derived. The area of the pre assessment is derived from the EVALUATION_TBtable. Its the value of eval_flag where sampling_date < = evaluation_date.
In our example, the pre assessment should be an "n" while the overall assessment must be a 'Y '. The priority is Y-> N-> Null. The Accept flag is set to a 'Y' If a meadow at overall results past of N to Y or a NULL of Y value.

I have to return all the lines for the student that show the results of the reviews SQL is the following:
I need to join the view EVALUATION_TB. Simply join them of course would be a resulting vector product in 15 files that I don't want. I tried online (subqueries) but I failed again. Any help would be great!
I created the column ord_num to maybe help using only this folder to display the results of the assessment.

select x.student_id, x.last_name, x.first_name, x.evaluation_date,
       m.exam_date, m.result,
       dense_rank() over (partition by x.student_id order by m.exam_date) ord_num
from
(
  select  s.student_id, s.last_name, s.first_name, s.evaluation_date
  from    student_tb s
) x, exam_tb m
where x.student_id = m.student_id (+);

SID     Last Name   First Name   Evaluation Date    Exam Date   Results   Order
===============================================================================

1001     Poppins     Mary     27-SEP-12     20-APR-11     30     1
1001     Poppins     Mary     27-SEP-12     20-MAY-12     39     2
1001     Poppins     Mary     27-SEP-12     10-JUL-12     34     3
1001     Poppins     Mary     27-SEP-12     10-SEP-12     39     4
1001     Poppins     Mary     27-SEP-12     01-DEC-12     82     5

Thank you!

Published by: Roxyrollers on March 14, 2013 11:37

Published by: Roxyrollers on March 14, 2013 11:38

Published by: Roxyrollers on March 14, 2013 12:27

Published by: Roxyrollers on March 15, 2013 13:43

Hi Roxyrollers,

Please check your insert statements before posting. They have syntax errors.

The following query is to give you the desired result:

with pre_eval as
(
   select e.student_id
        , max(e.eval_flag) keep(dense_rank last order by e.sampling_date) eval_flag
     from evaluation_tb e join student_tb s
          on e.student_id=s.student_id
             and e.sampling_date <= s.evaluation_date
   group by e.student_id
)
,all_eval as
(
   select e.student_id
        , max(e.eval_flag) keep(dense_rank last order by e.sampling_date) eval_flag
     from evaluation_tb e join student_tb s
          on e.student_id=s.student_id
   group by e.student_id
)
, data_with_rank AS
(
   select s.student_id, s.last_name, s.first_name, s.evaluation_date
        , m.exam_date, m.result
        , dense_rank() over (partition by s.student_id order by m.exam_date) ord_num
     from student_tb s
          left outer join exam_tb m
          on (s.student_id = m.student_id)
)
select s.student_id, s.last_name, s.first_name, s.evaluation_date
     , s.exam_date, s.result
     , e.eval_flag as pre_eval
     , a.eval_flag as overall_eval
     , case when a.eval_flag='Y' and e.eval_flag!='Y' then 'Y' end accept
  from data_with_rank s
       left outer join pre_eval e
          on (s.student_id = e.student_id and s.ord_num=1)
       left outer join all_eval a
          on (s.student_id = a.student_id and s.ord_num=1)
order by s.student_id, s.exam_date;

STUDENT_ID LAST_NAME            FIRST_NAME           EVALUATION_DATE EXAM_DATE     RESULT PRE_EVAL OVERALL_EVAL ACCEPT
---------- -------------------- -------------------- --------------- --------- ---------- -------- ------------ ------
1001       Poppins              Mary                 27-SEP-12       20-APR-11         30 N        Y            Y
1001       Poppins              Mary                 27-SEP-12       20-MAY-12         39
1001       Poppins              Mary                 27-SEP-12       10-JUL-12         34
1001       Poppins              Mary                 27-SEP-12       10-SEP-12         39
1001       Poppins              Mary                 27-SEP-12       01-DEC-12         82

However, is not clear to me why the assessment are related only to the first line in the query.
The evaluation_tb table is in fact related to student_id and I expect to be connected all lines.

I've actually linked subqueries pre_eval and all_eval only in line with rank = 1 but I don't understand if that's correct according to business requirements.

Kind regards.
Al

Published by: Alberto Faenza on 14 March 2013 20:29
ORDER BY added, deleted ord_num output

Sound pause/repeat function and chronology in a button

Hi, I just created a slide show flash with a background sound. All my images are clip individual film (for the tween class), and I created a button pause/resume for the background sound. However, when I have a break the sound, always moving images. I want to know if it is somehow that can interrupt/resume sound and timeline at the same time (pick up where he stopped) within a single button?
Here's the code I'm doing for the pause/resume button: I use CS5.5, AS3.
================================================================================
var resumeTime:Number = 0.00;
var mySound:Sound = new Butterfly_Waltz;
var channel1:SoundChannel = new SoundChannel();
pause_btn.addEventListener (MouseEvent.CLICK, pauseSound);
play_btn.addEventListener (MouseEvent.CLICK, playSound);
channel 1 = mySound.play ();
function pauseSound(e:MouseEvent):void
{
resumeTime = channel1.position;
CHANNEL1. Stop();
pause_btn. Visible = false;
play_btn. Visible = true;
}
function playSound(e:MouseEvent):void
{
channel 1 = mySound.play (resumeTime);
play_btn. Visible = false;
pause_btn. Visible = true;
}
====================================================================================
Can I add directly the action at these buttons (pause_btn & paly_btn) code rather changing function? Can a button has two eventlistener?
Hope that someone could help me.
Thank you!

If you want to sound controls also control playback from the timeline, then just add the control of timeline code to existing functions. Calendar control is simply using play() and stop() function calls.

function pauseSound(e:MouseEvent):void
{

Stop();
resumeTime = channel1.position;
CHANNEL1. Stop();
pause_btn. Visible = false;
play_btn. Visible = true;
}

function playSound(e:MouseEvent):void
{

Play();
channel 1 = mySound.play (resumeTime);
play_btn. Visible = false;
pause_btn. Visible = true;
}

If your slide show is inside another movieclip, then you're targeting just the movieclip with the call play() and stop(), as in yourMC.stop ();

During the pause the download and disconnect?

When downloading, if paused, then disconnect from the internet, download stop or not?
Because I don't know if she'll keep goin or stops suddenly.

The download stops when you are disconnected from the internet. You will need to once again, close the download and then start it again.

Provide more details:

What Adobe software you are trying to download? What operating system do you use?

join two tables and results to display checkboxes checked... loop david powers please?

Summary
two tables:
Table 1 categories
Table 2A categories that someone has selected
HTML form that updates the user's data:
form should show all the options in the category dynamically in table 1
and also to display the check box of the category as controlled dynamically if the person chose by table 2
The nuts and bolts
Attempt 1
My sql:
SELECT cat.id, cat.category, mcat.category as mcategory
THE CAT of categories, members_categories mcat
WHERE mcat.member_id = ' "." $_GET ['id']. »"
ORDER BY category ASC
(run on its own, all categories of table 1 are shown twice and the results of table 2 is a total cluster.)
area of the form with checkboxes:
<? PHP {? >}
< input <? PHP if (!) ((strcmp($row_rsCategories['mcategory'],$row_rsCategories['id'])))) {echo ' checked =------'checked\' ' ;}?} > name = "category []" type = "checkbox" value = "<?" PHP echo $row_rsCategories ['id'];? ">" / > <? PHP echo $row_rsCategories ['category'];? > < br / >
<? PHP} while ($row_rsCategories = mysql_fetch_assoc ($rsCategories));? >
what I have here results:
all categories displayed twice with selected categories of table 2 verified = by the results of sql when running alone
Attempt 2
My sql:
SELECT cat.id, cat.category, mcat.category as mcategory
CAT categories
LEFT JOIN members_categories mcat WE mcat.category = cat.id
WHERE mcat.member_id = ' "." $_GET ['id']. »"
ORDER BY category ASC
(run on its own, all categories of table 1 who have a match in the table 2 and none of the other in table 1 shows)
area of the form with checkboxes:
even the first attempt
what I have here results:
all categories selected in table 2 shows and checked, and no other choices of table 1 = by the results of sql when running alone
Attempt 3
My sql:
SELECT cat.id, cat.category, mcat.category as mcategory
THE CAT of categories, members_categories mcat
WHERE mcat.member_id = ' "." $_GET ['id']. »"
GROUP BY cat.id
ORDER BY category ASC
(running his own, all the choices in the category of table 1 are displayed, however, the mcategory column displays the lowest category numbered (same one) against all of these options rather then correspond to their.)
area of the form with checkboxes:
even the first attempt
what I have here results:
all choice of category in table 1 are displayed, however, only the first category in table 2 (which in this case is the lowest number) is marked as checked with the checkboxe, even if there is more then one category in table 2 = by the results of sql when running alone
so, can anyone help? I'm just banging my head against the wall here is something missing that should be obvious, because the sql is not giving me what I need to work with the form in a loop region. Perhaps another approach should be taken and I have change the loop as well, but I think that this can be resolved with the sql. Thanks in advance.

Well, you can use two separate sql queries...

one with the names of the categories

and the second nested with the loop that references the id of category in table 1 to pair with table 2

Pause a VI and results

Similar Questions

Maybe you are looking for