Pause for success/failure captions

Similar Questions

• Test for success/failure of archiveLogFile() servermanager method

  When you try to check a log programmatically using the servermanager archiveLogFile() is there a way to test the success / failure of the action. I tried

  adminObj = createObject("component","cfide.adminapi.administrator").login("topsecret");
  serverObj = createObject("component","cfide.adminapi._servermanager.servermanager");
  result = serverObj.archiveLogFile("logfilename");
  writeDump(result);
  

  However, the result is undefined.

  Thank you!

  This function has a returntype Sub, that's why.

  http://www.CFEXECUTE.com/Admin-API-documentation/ServerManager-CFC/#method_archiveLogFile

  Instead, you need to read something like a directory to see if the file has been renamed.

• Strange question in custom legends of success/failure

  Hello

  I have a strange problem in my custom legend of success/failure. If I use the of ' letter in my custom caption .bmp file, it is not correctly displayed in the captivate. Attached file is for your reference. I tried to convert text into an image in photoshop, it still shows the same thing. Any thoughts?

  

  Thanks in advance,

  -Ajay

  Ok.  That's what I thought.

  So what I think, happens here is due to how Captivate together text captions that can extend to any size, based on the component images.  I think that your corner image that contains text is stretched right at the place where the character of S is located at the end of congratulations.  Captivate realizes the resizable text caption by repeating the last few pixels of each background image.

  If you want to test my theory, just do your congratulations slightly shorter text (use a condensed font or make the font size smaller) and I think that your problem will disappear.

• Captivate 5: Insert success, failure, and hint of legends

  Hi all

  I tried searching this forum as well as the help of Captivate and have no growth with an answer to what I'm sure is a very simple problem. I'm creating a quiz in Captivate and accidentally deleted my success, failure and legends of suspicion on every slide in the question. Is there a way to get back them on these slides without having to recreate each slide of the question? (I noticed that if I add a new question, new success, failure and hint captions appear in the default style, I designated.) However, for existing slides, I was unable to make the captions I insert act as success, failure, or hint of legends; Similarly I can copy/paste them to a new question slide where they appeared automatically.) Can anyone help?

  
  Thank you!
  Karyn

  If you select each slide of the issue and for the Quiz properties panel, you can check the boxes to get the Correct back and suggest captions (incomplete).  But there is no option to return to the legend of the failure.  You must go to the failure of the levels take place and make sure that it is set at least one.  You will probably find that it is currently set to zero because you deleted the legend of failure and supposed to Captivate that means that you do not want failure as an option.

• Click Box has double hint and failure captions

  Hello
  
  The question of how pass the default text for click boxes captions successfully responded in a previous discussion, posting in the language settings and change the code here...
  
  Object name = DefaultTemplate "DefaultCaptions" = "" >
  < model name of the event = "ClickBoxSuccess" = "Correct!" / >
  < event name model = "ClickBoxFailure" = "Please try again!" / >
  < event name model = "ClickBoxHint" = "Try another key!" / >
  < / object >
  < / object >
  
  I then discovered that the text of the legend of failure for the click box is always the same as the text of the legend of suspicion, regardless of what text I change in the language settings. I think it only happens for click areas. Is this a bug in 1.01 or did I do something wrong when you change the encoding here? I posted this in the thread where the question has been answered before, but I'm not sure that my question has been noted. I apologize in advance for the display of this new, but I would like an answer. Is this a bug? Is this something that I changed not bad? Is there a fix available.

  Hello

  Thanks a lot for answering my question. I apologize for the double thread, but I just had to know... I submitted the problem as a bug. Thanks again to you and all the others who make this forum so useful for users of Captivate!

• How to detect the State of a LabVIEW test success/failure

  Which variable TestStand should I read to determine the State of a test of TestStand set success/failure?

  I use the parallel model and LabVIEW can see index of my process with the variable "RunState.TestSockets.MyIndex", but now the LabVIEW needs to know if this process was successful or failed the entire test.

  Possible, recommended to capture those (so do not use the "built-in controls visible TS') is to capture the UIMsg_EndExecution (which is generaated automatically if the engine ends an execution).

  This message to user interface, you can access its data, one being the property of Execution.ResultStatus and execution.

  See using TS for the possible values of ResultStatus. This allows to control indicators on your UI.

  hope this helps,

  Norbert

• Notification for success messages plugin?

  Hello
  
  I just found the http://www.oracle.com/technetwork/developer-tools/apex/application-express/apex-plug-ins-182042.html Notification Plugin
  in the oracle plugin repository and I wonder if it is possible to use this plugin, not only in a dynamic action, but also for success messages?
  
  Thanks for the help in advance,
  Dirk

  Guys,

  I know this thread is a bit old, but here's a blog on how to Growl notifications in APEX for success and failure messages

  http://douggault.blogspot.com/2011/06/style-notification-messages-for-Apex.html

  Doug

• Text input does not pause for user input

  If all goes well, a simple question:
  
  Brief:
  I have a box of text on a page of simulation of connection that do not pause for user input. Instead, it just displays as if writing be typed and then continues.
  
  Question:
  How do I get this thing to pause and wait for the user to enter the login id?
  
  Detail:
  Version 1.01.1418 (full version), platform PC of Captivate
  Text entry box
  1 entry correct listed: "sa".
  Success = continue
  Display: Rest of slide
  Break after: 0.1 sec (varied this having any impact on a break for the entry)
  No transition
  
  DRM for advice.

  This must have been a dark note somewhere in the documentation:

  You can not interact with the page if preview you with play this slide (F3). The other preview modes to the text entry area work correctly.

• Tracking success/failure on LMS

  I'm trying to follow the success/failure of a Captivate project and I'm having difficulties with the LMS. It is followed as finished after just the first slide, before taking the quiz again. I have my settings of the quiz the report 'Quiz results only' option, Pass/Fail, report LMS as a percentage, Reporting level is 'Report Score', pass/fail options are set at 75%.
  
  NOTE: I welcomed the user 2 attempts to pass. Could this be what gives me?

  I had this with our change LMS (Sumtotal) Pass/Fail to complete/incomplete in reporting of quiz

  This fixed it for me.

• Auto-pause for cycling

  How can I set auto-pause for cycling.

  Hello

  Auto pause is currently only available for the training of inner and outer race.

  More information:

  Work with your Apple Watch - Apple Support

• How can I inform the operator of the reason for the failure?

  I inherited several TestStand sequences with about 35-40 pass/fail and tests digital limits. The sequence is made to fail if a step fails.

  There seems to be several ways to warn the operator on the nature or the reason for the failure. Everything that happens now is that the Red 'sequence Failed' popup appears, and the operator gets to install UUT following. This example uses the template of "Sequential" standard.

  I am looking or the other

  1. change each affected step and change in 'Action', then adding a step later that displays a message if the stage previous "failed", then fail the sequence. Or perhaps a variant of that, to change the step so he can skip the next step if 'Pass', the next step was to pop the message and fail.

  2. having learned about the UI and then implementation. (Exaggerated this feeling but I'm open to suggestions.)

  Or y at - it another simpler way? I'd just like to bring up a text with suggested corrective action, just before the red notice "Test failed".

  Thank you.

  Take a look at the use of the callback SequenceFilePostStepFailure engine.

  There is an example found in \Examples\Callbacks\PostStepFailureCallback\FailureHandlerExample.seq

• DAQmx how to control the level of tension AO paused for a relaxing break?

  I have an application where I need to generate a waveform of a fixed frequency (~ 200 kHz) and the amplitude, but for differing them burst lengths and different lengths of time between bursts. These bursts and these delays are controlled by a line of DIO to generate the relaxing break. I also need to have the output voltage analog voltage controlled between bursts of waveform. I explored using various trigger options, the break seems to be the best solution, but I'm difficult to control the particular point of the end of the waveform during the break occurs to make sure that the break is at the same specific voltage when the wave is hidden. I try to adjust the position of the example 'Analog output Pause for the periodic Signal with regeneration on specimen' but cannot get regular tension during the break I'm after. I use a card Series DAQ. X is there a simple way to pre-set the tension that will be broadcast during the paused state when using a relaxing break? I was not able to find it in the examples or documents. I can't use the code of reference AO set example because it is a software-driven and does not fit into the model of schedule I need to generate.

  Hello

  I don't think there is a way to establish a certain level on the analog output, based on a relaxing break.  I watch using a redeclenchables task analog output and do every hour of beginning to the required voltage.

• Then... Adobe doesn't have a pause for customers of the subscription option? Has anyone else had to pause/hold a subscription and they told you to cancel and start a new subscription when you want to return?

  Then... Adobe doesn't have a pause for customers of the subscription option? Has anyone else had to pause/hold a subscription and they told you to cancel and start a new subscription when you want to return?

  If you have a MONTHLY subscription, not an annual subscription with monthly payment, you can stop/start according to the needs

• Configure Alerts email for hardware failures

  Our ESXi 5.5 environment goes live today and now it will be in production I was wondering if there was a way to configure alerts email for hardware failures. For example, if a disk goes wrong in our RAID array, I want to be emailed on this subject. Is this possible, and is there a link to find out how to implement that?

  Go to the Administration menu-> vCenter Server Settings-> E-mail and enter SMTP server and the account of the sender.

• How to get alerts for hardware failures

  Hai,

  As I am new on the vmware I'm interested to know how many VI troubleshooting if something goes wrong?

  How to get alerts for hardware failures? IF a drive failed in RAID1 how to identify? VM is grayed out, no use via the GUI and Console, where to check?

  If anyone knows where to find the answers for part of vsphere troubleshooting please let me know, is there any blogs or sites for beginners? Am in the theritical part. I need troubleshooting documents or videos.

  Thanks in advance

  In vSphere, you can monitor hardware heakth and status and receive alerts in the client vSphere also depending on the hardware that you use you can take for that hardware manufacturers probes.

  For troubleshooting / you can check this site - http://www.vmware.com/support/product-support/vsphere/