Pause/Resume buttons in AS3

Similar Questions

• Pause Slide button do not break. MP4 video

  I have a button with a tip Action to Pause / playback of the slide.

  Question

  Is there a method to Pause / resume a slide which will include. Functionality of MP4 too?

  Question

  Video slide do not break by using the method of Action Advanced below:.

  -Slide the audio breaks

  -Slide break interactions

  -But NO video slide (.) MP4)

  
  

  Content of the tip Action :

  IF cpCmndPause = 1

  Assign cpCMndResume = 1

  Else cpCmndPause = 1

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Roughly translated, it says:

  If the movie is paused, resume.  Otherwise, take a break now... but it doesn't.

  Found the solution.

  MP4 Video is NOT suspended with the timeline because it has its OWN script.

  Recode video in F4V format and now it stops with the slide.

  <-- used="" adobe="" media="">

• Resume button flashes on an HP printer

  Original title: HP printer - why thye resume button flashes... ?

  The resume button light flashes... and the printer will not respond to the print command. !

  Hello

   
  1. what operating system is installed on the computer?
  2. What is the model of the HP printer?
  3. were there any changes (hardware or software) to the computer before the show?
   
  Method 1: Perform the steps in the article mentioned below and check if the problem persists.
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00877377&LC=en&DLC=en&cc=us&product=2510771
   
  Method 2: Refer to this link below and a search using the model you own.
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&cc=us&DLC=en&submit=&product=top
   
   
  Hope this information helps.

• My PAUSE/PLAY button no longer works.

  I'm a little obsessed to keep my rocket (v 2) clean, even if I have a case of crystal clear for this - but leaves the click wheel - so I wipe two or more times a week with Clorox and rubbing alcohol.  I think I might have overdone it because my PAUSE/PLAY button no longer works.  This means that I can listen to music when the player is turned on, but I can't put pause a song.  If I want to stop a song, I have to turn off the player by using the side buttons.  When I turn it on, it plays right where the song was off, but it's kind of annoying.  Is it possible to fix my PLAY/PAUSE button, or took my ways germaphobic with me?

  willlet784 wrote:
  How I would delete the current firmware I have on the reader?

  You do not have. Just manually, re - install the firmware as suggested. You can get the latest version here. It won't replace what is on the player.

• &lt; cfschedule &gt; pause, resume, and delete does not

  I am running CF10 fully updated (10,0,11,285437) and I can not get the < cfschedule > tag pause/resume to work properly.  That's what I noticed at first, then I realized later that the removal does not work either.  I always get:

  The next task is not found: myTask.

  I am running 64 bit CF10 and Apache 2.2 (32-bit), Windows Server 2008 R2 and I'm running virtual hosts under a unique IP address.  The < cfschedule > 'update' and 'list' tags work very well also do the 'pauseAll' and 'recover' for groups.  Unfortunately, I have not another 64-bit server to try to set it up again and check the issue.  I hope someone can give me some ideas on where to go next here, because I really need to use this feature and I already had 1 other person tell me that it works for them under CF10.

  Please, any help or suggestion on what to try would be really appreciated.

  Here is a paste of my sample code breaking.

  < cfschedule action = "Refresh" task = "myTask" group = "myGroup" mode = "application" interval = "300" requesttimeout = '60' startdate = ' 01/01/2000' starttime = "00:00:00" url =" " http://www.Google.com " />

  < cfschedule action mode = 'list' = 'application' result = 'tasks' / >

  < name cfquery = 'tasks' dbtype = "query" >

  SELECT * from tasks

  WHERE lower (task) = < cfqueryparam value = "#lcase ('myTask')" # "cfsqltype ="cf_sql_varchar"/ >"

  < / cfquery >

  < cfdump var = "#tasks #" / > < br / > < br / >

  < cfschedule action = "pauseAll" group = "myGroup" mode = "application" / > <! - works - >

  < cfschedule action = 'recover' group = "myGroup" mode = "application" / > <!--> work

  < cfschedule action = 'suspend' the task = "MyTask" / > <!--> fails

  < cfschedule action = 'delete' task = "MyTask" / > <!--> fails

  Thanks in advance,

  Daniel
  

  So it turns out that if you use 'mode' or 'group' attributes, you need to pause, resume and delete the task, even if you refer to them by name.  Once I added 'mode' and 'group' it started working.

• Referencing the buttons in AS3

  I am trying to find a way to refer to a specific button of a large group of buttons in AS3. I'll tell you. Let's say, for example, I have a lot of buttons on the stage (say 100) Each of these buttons causes something happens. Instead of creating an event listener and a function for all buttons in 100, I want to do more dynamically. I want to have some sort of variable that will be equal to name the instance of which key was pressed, then an event listener that will check the value of this variable, and, depending on what she is equal to, he will issue an order. Any ideas on how to make reference to a key in this way? Thanks in advance.

  Import fl.controls.Button;

  var buttons: Array = new Array();

  for (var i: uint = 0; i< 10;="" i++)="">
  the buttons [i] = new Button();
  the buttons [i] .move (0, i * 22);
  the buttons [i] .label is 'Hello' + i;.
  buttons [i] .addEventListener (MouseEvent.CLICK, onClick);
  addChild (buttons [i]);
  }

  function onClick(event:MouseEvent):void {}
  trace (Event.Target.Label);
  }

• Style definition for a group of buttons in as3?

  Gidday

  I know how to set the style of a button in AS3, but is it possible to apply a style to text format to a group of radio buttons, rather than each individual button?

  Thank you guys

  Shaun

  The RadioButtonGroup class does not include Styles, just the class RadioButton.

• Not able to pause/resume a scrolling image

  Hi all
  
  I wrote a post re there try to pause/resume a scrolling image a few days. I still have the problem that keeps development. I have attached the code snippet and be grateful for the help please. If the image is replaced by a text string, the methods to pause/resume work. I walked through the code with the debugger and the methods are called, but it's not yet to stop scrolling!
  
  Any help is highly appreciated or code suggestions, for example, on a better way to do it. Thank you
  
  Cheers!
  
  DaveJ

  This is a more elegant solution. Get rid of the callLater() calls entirely and use a timer to invoke the effect of movement:

  
  
  http://www.Adobe.com/2006/mxml"creationComplete =" initApp () ">"
  import flash.utils.Timer;
  import flash.events.TimerEvent;

  [Bindable]
  public var speed: Number = 5;

  private var myTimer:Timer;

  private function initApp (): void {}
  myTimer = new Timer (1, 0);
  myTimer.addEventListener ("timer", Moveimage);
  myTimer.start ();
  }

  public function changeSpeed (): void {}
  Speed = speedSelector.value;
  }

  private void moveImage(e:Event):void {}
  myMove.end ();
  If (theImage.x > c1.width) {}
  theImage.x = 0 - theImage.width;
  }
  myMove.xTo = theImage.x + speed;
  myMove.play ();
  }
  ]]>

  
  
  horizontalScrollPolicy = "off" width = "100%" >
  
  Height = "100".
  Width = "100".
  mouseOver = "myTimer.stop ()" "
  mouseout/mouseouthandler() = "myTimer.start ()" "
  />
  
  
  
  
  ID = "speedSelector" snapInterval = "1" tickInterval = "1" liveDragging = "true".
  change = "changeSpeed ()" / > "
  
  

  HTH,
  Matt Horn
  Flex docs

• What to put in pause/resume command as3 captivate 6.

  OTN I work for only wants to work with vanilla to captivate and flash versions as well as widgets are too difficult to convince them to use.

  I need a break start captivate using an external call but so far... good .no on these sub form scripts

  get an alias for the main movie.

  Stop();

  var myRoot:MovieClip = MovieClip (root);

  var mainmov:MovieClip = MovieClip (myRoot.parent.root);

  Say things to stop and or continue.

  mainmov.cpCmndPause = 1;

  mainmov.cpCmndResume = 1;

  I guess it should work because that is what was suggested by a bunch of other developers useful.

  But when I paste these into a swf and load it as an animation in Captivate... I get nothing!

  Someone at - it a petter process does not include a widget?

  See you soon

  Luke

  Try using the old variables rd.

  rdcmndResume

  rdcmndPause

• Simple Play/Pause/Resume in no audio timeline

  So sorry if it's simple. I HOPE it's simple, it should be simple.

  I have a very simple calendar in a loop. I just want to create a TOGGLE function so that the user can pause and resume. As a still picture. Or the space bar in some movies, editing programs. Simple BREAK.

  http://colorisrelative.com/RichMedia/templateROTATING.swf

  What I find to break is a break for a limited time - then he resarts alone.

  I want to take a break on the current frame and restart the current frame when the user clicks.

  (or I keep finding stuff for audio and video). I hope that there is a real simple solution. I'm really bad in actionscript. What follows is the exent of my knowledge of actionscript:

  (click to start)

  http://colorisrelative.com/RichMedia/template3as2moosh.swf

  So thank you for letting me know if there is a swap function simple pause/play!

  Thanks for showing the code that you understand.  The way to what I offer, is to use a variable that keeps track of what the State of the film is in (in pause or play) and use this variable to decide how to do the opposite of what it currently says.

  On the calendar, create a variable: pausePlay var = false; It's the movie start plyaying all on without clicking anything whatsoever

  Create a button that covers the entire scene, as you did for the second example.  Add this code to the button:

  {We (Release)}

  {if (pausePlay)}

  Play();

  pausePlay = false;

  } else {}

  Stop();

  pausePlay = true;

  }

  }

• Is it possible to change the link to the WMP to Play/Pause/Stop buttons

  Is it possible to change the link to the WMP to play/Pause and the Stop button?
  Because network alone and media buttons can be changed by the software.
  And I'd rather not WMP for my favorite media player.

  Unfortunately, the buttons are configured with WMP (if the CD is inserted) and WinDVD (if the DVD is inserted).
  I guess that you can not use buttons with 3rd party applications.

• By clicking twice on the pause/play button

  Hello

  I had a break and a button "play" to my slide show.

  The pause button is just a boks with the code for the click action:

  {sym.$('btn'). Click (Function ()})

  SYM. Stop();

  });

  The pause button is a boks with the code for the click action:

  {sym.$('btnPlay'). Click (Function ()})

  var timelinePos = sym.getPosition ();

  SYM. Play (timelinePos);

  });

  It works, but in the beginning, I have to click twice before the function.

  It's only the first time. After that, everything works fine.

  Does anyone know what could be the problem?

  Heya,

  I think there is an easier way for you to do. Try adding the following to the item you want to play/pause:

  var playing = sym.isPlaying ();

  If (playing = true) {}

  SYM. Stop();

  } ElseIf (playing = false) {}

  SYM. Play();

  }

  This will make the button stop (suspend) the calendar when he plays and play the timeline when it is stopped.

  See you soon,.
  Sarah

• Image by image button in AS3

  Hello

  I started a few days with Adobe Flash CS4, and I need to create buttons now. The button I want to create this time should be a button image by image, so when the user clicks 1 time on the button of the animation must go 1 frame far and pause it.

  That's what I've coded so far:

  nextframeknop_btn.addEventListener (MouseEvent.CLICK, nextframeClick);

  function nextframeClick(event:MouseEvent):void {}
  Play();
  Stop();
  }

  And I guess I need to create a sort of time interval of 1 frame between the 'play();"and the"stop()";.

  Before everyone says use the search button, yes I tried and I have not found an explanation for my problem. Also if you find something else in the code that is not correct, please tell me, I'm not so familiar with flash still and every help and advice is welcome!

  Also for those who is interpunction-nerds, don't blame me, I'm only 15 English isn't my main language and yes I attention in English class...

  Greetings,

  Coyke

  use:

  previousframeknop_btn.addEventListener (MouseEvent.CLICK, previousframeClick);

  function previousframeClick(event:MouseEvent):void {}
  prevFrame();
  }

  p.s. Please mark this thread as answered, if you can.

• Adding function onRelease of instance of a button with AS3

  I am trying to add a simple navigation to an instance of a button on my stage through the AS3. my code is below... I used the same code in AS2, but I have to leave something out in AS3... can someone help me?

  Thank you!

  Pat

  btn_arrow_TL.onRelease = function()
  {
  gotoAndPlay ("flyout_default");
  }

  Compiler errors:

  1120: access of undefined property, click.

  This isn't code as3.  in as3, this would be:

  btn_arrow_TL.addEventListener (MouseEvent.Click, f);

  function f (e: Event) {}

  gotoAndPlay ("flyout_default");

  }

• Buttons and AS3

  Hi all

  Basically, I am a novice when it comes to AS3 and I was wondering if some of you experts might provide some help. Here's the scenario. I created a Flash CS4 document that contains 2 buttons. I used the code below for the two link buttons to well-known web sites, has tested them in Flash and the buttons work well.

  Btn1.addEventListener (MouseEvent.Click, f);

  function f (e: Event) {}
  navigateToURL (new URLRequest ("http://www.adobe.com"));

  }
  btn2.addEventListener (MouseEvent.Click, F2);
  function f2(e:Event) {}
  navigateToURL (new URLRequest ("http://www.microsoft.com"));

  }

  But this isn't really what I want them to do next. I intend a) import the Flash file in Dreamweaver ('index1'), and I want buttons rather a link to / turn on two other pages of the site "index2.html" and «index3.html» Dreamweaver How can I change the code to do this? Could I, just for example, replace """http://www.microsoft.com"" " with "index2.html" and that will work? I did not actually build Dreamweaver sites yet, so can't test my theory. In any case, any advice or assistance would be greatly appreciated... frank

  *******************

  Yes about who should work. Don't forget that the references are to the original page holding the swf, not to the file swf itself and you should be fine.

  If you have more than two of them you will get a lot of code and here are some tips for cleaning it.

  If you name your buttons btn0, btn1, etc... (it is good to learn how to start the counter to zero!) Then you might do something like this:

  for (var i: int = 0; i<>

  This ["BTN" + i] .addEventListener (MouseEvent.Click, navLinks)

  }

  function navLinks(e:MouseEvent) {}

  var url: URLRequest = new URLRequest();

  {Switch (e.Target.Name)}

  case 'btn0 ':

  URL. URL = "address0.html";

  break;

  case "btn1":

  URL. URL = "Address1.html";

  break;

  etc.

  }

  navigateToURL (url);

  }

  In this way, you only have one function that handles all of this. There are many other ways to stream online, but no baby...