Pavilion 1050NL PC will not accept the upgrade of ghraphics GTX760

Similar Questions

• Satellite P10 804 will not accept the upgrade of RAM

  Apologies, this is it is a bit long and also if this question has been covered elsewhere here: I had a good nose autour and have not found something that seems to help.

  In any case, I had a Satellite P10 804 during these past years, I bought in the United Kingdom.

  Quite early in my time with this laptop, I upgraded the RAM. It was 3 or 4 years ago, when memory was not as cheap right now, so I bought just a single 1 GB module. P10-804 will take up to 2 GB of RAM.

  The P10 804 came with 512 GB as standard in two modules. My upgrade means I got 1.25 GB, which was in very good health. Everything was fine until the end of last year when the defective laptop; I followed the fault in module 1 GB of RAM. It was a bit awkward since I now live in New Zealand. However, the provider of the RAM was very professional, stood by their warranty, and we arranged a swap. RAM prices had fallen, so I bought another module of 1 GB at the same time upgrade the laptop completely.

  Now the problems really started. The laptop would not simply work with the new installed RAM modules. It would work with one alone, nor even less with my old configuration of a module of 1 GB and 256 GB module. Start and run for five minutes before a freeze; white screen with fans roar; blue screen; frozen screen normal with strange objects; No start at all. everything.

  Everything that works now is my original 256 MB module (his partner disappeared). This leads me to assume that I don't have some sort of hardware failure?

  1 GB modules are DDR333 SODIMM, CL2.5. This laptop will also have the DDR266 modules, and it has been suggested to me, lower speed might work. I can try this option since the RAM prices are * really * low now, especially if I get confirmation of this as a valid strategy possible.

  The laptop BIOS is updated to v2.00 (maybe?), and I also upgraded the HDD to a 120 GB unit (this works very well and is partitioned for XP and Linux). And from time to time I empty the fan.

  Any advice welcome. Thanks for reading.

  > The laptop would not simply work with the new installed RAM modules. It would work with one alone, nor even less with my old configuration of a module of 1 GB and 256 GB module. Start and run for five minutes before a freeze; white screen with fans roar; blue screen; frozen screen normal with strange artifacts; No start at all. everything.

  Reading your message, I came to the conclusion that this issue must be linked to the new RAM module and this module is malfunctioning or is not fully compatible with your laptop.

  The P10 can be upgraded to 2 GB, so you should be able to use two single RAM 1 GB modules

  So it must be a module problem

• My laptop is level and returns then the previous version of Firefox. He will not accept the upgrade. Why?

  I have Firefox as my preferred browser. And I tried to upgrade several times. Whenever Firefox welcome for doing, but then when I open Firefox browser the next time, it returns to the previous version.

  What security (firewall, antivirus) software do you have?

• On my old e-mail account I could insert a list of addresses by putting the list name in the to: my new email account will not accept the list names. How can I fix th

  My old Thunderbird e-mail account has been with Time Warner,
  SC. RR.com. my new second account) is with AT & T, ATT.net.

  In my old account I could give a name to a list of multiple e-mail accounts, put the name of lists at the BBC: and send email to everyone on the list.
  My new account will not accept the name of a list. He insists on the format of a single e-mail account. I tried to create a new list after closing the old account and open the new one, but the results were the same.

  How to make 'list' to work on my new ATT account?

  I'm glad to hear that your problem has been resolved, please select the answer that solved the problem. This will help other users with similar problems more easily find the solution.

  Please contact the Mozilla Support!

• I have never installed my MS when I bought my PC and now it will not accept the product key, how can I get a new key

  I have never installed my MS when I bought my PC and now it will not accept the product key, how can I get a new key

  What "MS"?

  Microsoft is a company, not a product.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

• Windows Vista Home Premium Activation, will not accept the product key

  I bought a HP Pc several years ago, Windows Vista Home Premium has been and is still on it, now it says I need to activate but will not accept the product key to activate.  It messed me up, I can't get to my desk top.

  1. activation by phone
  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  Pay attention to step 2: how to do a phone Activation.
  Note: If the activation service will inform you that it was
  unsuccessful and cannot help with activation, thenSTAY ON THE LINE and your
  call will be transferred to an operator of activation that will help you
  activate your copy of Vista.

  2 here is a response from Keith, Microsoft Support,
  Moderator, on this subject.
  Date: April 29. 2010

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/6efea9fd-70a9-4530-88c8-93fd7b2d5484

  3. how to activate Windows Vista
  http://support.Microsoft.com/kb/940315

• Windows7 will not accept the product key for activation

  Windows7 will not accept the product key for activation after a clean reinstall of the o/S.i. to pass messages to the effect that the product id is not valid for activation, even if it's the OEM product key. Enter the key manually and the telephone audit failed. Any ideas?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Try to install adobe photoshop elements 7.0 on the new computer. Will not accept the original serial number?

  Try to install adobe photoshop elements 7.0 on the new computer. Will not accept the original serial number?

  Move the thread to Photoshop Elements

• I bought a new computer and also Adobe acrobat Pro XI.  It did not work properly.  I uninstalled and tried to reinstall it, but the computer will not accept the serial number.  What can I do?

  I bought a new computer and also Adobe acrobat Pro XI.  It did not work properly.  I uninstalled and tried to reinstall it, but the computer will not accept the serial number.  What can I do?

  You accidentally type in a redemption code when he says he only wants a serial number?

• Blackberry enterprise server configuration will not accept the connection.

  Original title: remote terminal BlackBerry or resource will not accept connection

  Blackberry enterprise server configuration

  H

  1. What operating system is installed on the computer?
  2. What exactly are you trying to achieve?
  3. What is the full error message received?
  Since your post looks like this, the problem is related to the server, Blackberry enterprise server, that's why I suggest you to report the issue to the links below for assistance:
  http://social.technet.Microsoft.com/forums/en-us/ocspresenceim/thread/84884b83-b8a4-4150-b395-19c133b6254d/
  http://BTSC.webapps.BlackBerry.com/BTSC/microsites/msbrowse.do?UMBrowseSelection=SG_BLACKBERRYENTERPRISESERVER_4_1
  I hope this helps!

• Uploaded image of Windows 7 Professional will not accept the product key that came with my computer.

  I have a Dell laptop, Studio, approximately 1 year, delivered with Windows 7 Professional installed - the label with the genuine product key is located at the bottom of the laptop. Shortly after I got it I deleted the recovery partition to make room for Linux installed next to Windows. I had problems with Windows system (mainly caused by me bad installation software and drivers without proper backups) so I decided to reinstall Windows. I had already deleted the recovery partition and wouldn't use it anyway because I prefer a clean system without unwanted from the manufacturer in this regard. I did not receive a Windows operating system installation DVD with my computer, so I downloaded a (64-bit Windows 7 Professional, the same as the original operating system) which already had SP1 on it (the version of Win7Pro installed Dell's not SP1). I installed Windows on this drive and attempted to activate using the product key that came with my computer, but it would not accept the key. I don't have time to try to solve this problem, but now the period of one month is up and my computer does not work correctly.
  I suspect that the problem may be due to me using the SP1 disc. If this is the case, should I reinstall Windows again? I have * NOT * GOING to buy another product key when I have already paid for a genuine version of Windows. I just want to be able to use my computer without the ridiculous slowdowns caused by pre-installed software and the way I chose.

  Thanks for any help with this problem, I really need fo fix my computer.

  original title: Activation error, Windows 7 Professional
  Windows product key: *-* - M3DJT - 4J3WC-733WD
  Windows license Type: OEM SLP

  The key to your report is your OEM SLP key which can not be activated. This isn't the key to COA.

  but the key I tried to use is what I copied on the COA the day I got the computer of the book where I put all the information on my computers.
  
  
  Is the product key in your book is the partial key in your report?
  You must change the product key to the one on your COA.
  Check your compartment of the COA.
  The other solution is to reinstall your Dell OEM recovery disks or recovery partition. This self will activate your computer.
  Additional information:

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  (A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  (B) COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• mail will not accept the password

  I saw this question elsewhere with no response, I hope to have an answer.

  I have a macbook pro with OS X El Capitan with Safari 9.1 I got my MB today Soho back, they fixed a problem with my wireless.

  in any case they made the El Capitan upgrade for me, but now my mail does not accept my password. I called my internet provider and they verified that it was the right, it works in webmail, but not e-mail. Any ideas? Thank you.

  The same thing happened to me.

• Modem will not accept the drivers on Portege M400

  Hello

  I have a Portege M400 built from a unnatended installation, which accepts all Bluetooth, Screen Rotation, etc. Disk utility HARD drivers but it won't accept and install THE modem drivers. I tried the drivers from the Toshiba tools disk and two drivers XP modem on the Toshiba site.

  The modem is installed and works fine when using the product recovery image, but the drivers will not work after the installed unnatended be applied.
  The unnatended disc has also included modem drivers, but of course, they do not pick up any.

  Is it possible that I can get my Active Modem?
  Thank you very much

  Rob

  You said that the modem is working after installation of the recovery CD.
  One question; Why you n t want to use the Toshiba Recovery CD?

• When I try to connect to the wireless router, it asks you the password I put it and he then asked again and will not accept the password. all other computers (without windows 7) connect correctly.

  My new computer has windows 7 when I try to connect it to my router it ask the password, then he asks the network password I put in the same password and it does not accept it. I spent ove an hour on the phone with a very helpful and confused expert to the Virgin. He tells me that the password only I need to communicate with the router is the main. We tried a lot of things all very technical and finally he gave up. Other computers with vista on connect very well with no problems at all.

  The network is fine and all the settings are fine. Occasionally, it connects via a home network but then it stops. When I try to communicate with the printer wireless signal stops and starts.

  I don't hold much hope of a response that experts were left very confused by this first abandoned after 45 minutes and the second lastered over an hour are totally flumaxed and blame windows 7

  But everyone told me that windows 7 was supposed to be the best

  Your post has nothing to do with the Windows Update feature (compared to the upgrade of Windows). Please repost it here for assistance: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The copy of Windows Vista is not genuine and will not accept the product key.

  Original title: my copy of Vista has just decided that it is more authentic and does not accept my product key. Why?

  Can you re - activate my product key or simply give me a product that works properly & constantly?

  If you mean that you can not activate automatically, try to do it manually:

  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC and only installed on this PC.  They should give you a code to enter on this screen to activate Vista.

  To solve the real problem, repost on the Forum of real advantage to:http://social.microsoft.com/Forums/en-US/genuinevista/threads.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.