Replacing the T500 screen with warranty

Similar Questions

• Replace the Win7 login with view Client screen

  Howdy

  I don't know yet if it's possible, but I heard that you can replace the login screen of Windows XP with the Client of the view, so that when the computer/Thin Client starts, the first thing you see is a connection for the customer to view, and by entering the credentials, you are connected to the virtual computer.  Loging out of the virtual machine that takes back you to the login screen ' display/computer customer '.

  Is there something similar to this in Windows 7?

  I would like a way for my users can connect to a virtual machine as quickly and easily to these thin clients as posible, making them more in the terminals that real thin clients.

  Standard t5745, embeded Windows 7 HP thin client, view 3.5 (eeeww, we modernize quickly.)

  Thanks everyone, any ideas or suggestions are welcome

  Torstein II beginning Sir

  Matte Gud velsigne deg worked!

  Yep, Gina has been replaced by another system of credential called ICredentialProvider

  It seems very difficult (and not well documented), but I found a few sources of Microsoft for you:

  http://msdn.Microsoft.com/en-us/magazine/cc163489.aspx

  and

  http://msdn.Microsoft.com/en-us/library/bb776042%28V=vs.85%29.aspx

  Hope that it will help, but requires programming with the API. And, please, don't forget to score.

  See you soon

• iMac G3 tray charger stuck on the gray screen with question mark flashing folder

  I recently bought an iMac G3 (charger tray, 333 MHz, M4984) and when I try to boot from an OS installation disc 10.3, there will remain only blocked on the gray screen with folder flashing with the question mark. Not only it does not maintain the keys C or Option, but it will not start up any combination of keys, such as resetting the PRAM or the NVRAM. It just starts and stays on the screen with the flashing folder does nothing. It CAN read the keyboard, because I can turn on the computer with the keyboard, it just won't start to the top of any disk or any combination of keys. Any ideas on what could be the problem? I just replaced the hard drive, but it was the same before I replaced the hard drive as well. In addition, the iMac had apparently OS 8.6 installed on it when it came, and I think I need to move to OS 9 and do a firmware update before you install OS X (correct me if I'm wrong), but I can not do because the iMac does start not in general of any combination of keys. Thanks in advance, any help is appreciated.

  I recently bought an iMac G3 (charger tray, 333 MHz, M4984) and when I try to boot from an OS installation disc 10.3, there will remain only blocked on the gray screen with folder flashing with the question mark.

  Valid operation system not found.

  Not only it primer not leave now pressed the C or

  Place the cd in the drive.  power off.  Hold c power key on & while in the startup is underway.
  

  Keys options,

  key option is not supported on tray loading imac g3 333

  In addition, the iMac had apparently OS 8.6 installed on it when it came, and I think I need to move to OS 9 and do a firmware update before you install OS X (correct me if I'm wrong), but I can not do because the iMac does start not in general of any combination of keys. Thanks in advance, any help is appreciated.

  It took charger slot, but I think that optional for the bin.  I think that you can upgrade the firmware with 8.6 for trays.

  You may need to reset the PRAM and NVRAM and Mac's Open Firmware. Stop the Mac, then it turns on and before the screen lights up, quickly down the command, Option, P, and R keys, until the Mac rang twice more after the power to chime.

  Then, before that lights up the screen, hold down the command-Option-O-F until the Open Firmware appears. Then enter these lines, and then press return after each of them:

  Reset-nvram

  Configure default

  Reset-all

  "The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings. »

  http://support.Apple.com/kb/TS1812?viewlocale=en_US

  In the case of the...

  Try taking the battery for 10 minutes.  Put back in the battery.  Fingers crossed. Turn the machine back on.

  How do I eject the cd from the internal drive:

  eject the cd

  List of devices:

  devalias

  List of variables:

  printenv

• Resolution of the different native screen after replacing the LCD screen

  I recently had my HP Pavilion DV7 laptop screen replaced after getting a crack in it. He was sent to HP for repair and she came back yesterday with a new brand, screen exactly like my old. While the screen looks the same as the old, when I started, it is a completely different resolution. On the old screen that broke the (maximum) native resolution was 1600 x 900. However, on the new, the (maximum) native resolution is 1920 x 1080. I'm still able to go back to 1600 x 900, but when I do the text becomes blurry. I suppose I could use the 1920 x 1080, but it would take a lot of time to get used to it, especially since I am using 1600 x 900 for two years. So my question is, why is there another native resolution and is it possible to fix the blur with 1600 x 900? I don't understand why all this is happening, because the screen looks exactly like my old, same size and all. I don't know of changes to software that took place or the other, all what has been messed with to my knowledge was the physical display.

  Thank you!

  Hello:

  From the sound of it, HP has replaced your original screen with better resolution by mistake.

  There is nothing you can do except to report it to the support of HP and ask to the screen to be replaced by one of the same characteristics as yours, or you will have to get used to the larger screen real estate and more small text and objects, or use a different resolution which may be more attractive to you.

• My Dell Vostro 1310 won't start. I turn it on and the black screen with the Dell logo appears and nothing more

  It was working fine and accidentally my phone fell on the keyboard and the computer froze. There was a part of the image of what was on the screen before that happened and blue and red lines/markings or whatever it is. I unplugged and took out the battery. When I turned on it again, the black screen with the Dell logo comes up and just stays there. What should I do?

  Hello

  If under warranty contact Dell

  http://support.Dell.com/

  or ask in the forums Support of Dell

  http://en.community.Dell.com/support-forums/default.aspx

  If it is under warranty, contact a reputable repairman, local computer

• Is it possible to replace the hard drive with an SSD? or would it be too expensive?

  Is it possible to replace the hard drive with an SSD?

  or would it be too expensive?

  Yes.  There are several alternatives.  I found a way relatively inexpensive, using a map of mSATA (very small SSD) and an adapter to connect it to the connector IDE 44 pin internal of my PowerBook.  It works very well.  Rather than repeat what I posted previously, you can watch these two topics (which also has good info, other users)

  Re: This win to install a SSD drive in a PowerBook G4?

  Re: SSDS  (my post is halfway - "this is how I did with my trusty Pismo...) »)

  FYI - I have used the adapter is even cheaper now

  https://www.Amazon.com/GP/product/B009BA8V4M

• Re: Tecra A9 - 11M - replace the HARD drive with a larger

  I have a Tecra A9 - 11 M with Windows XP Professional installed. I would like to replace the hard drive with a larger drive and install Windows 7 Professional.

  Any suggestions on recommended records say 500 MB?

  Difficulties to install Windows 7 on this model?

  Hey,.

  > Any suggestions on recommended records say 500 MB?
  I assume you mean 500 GB and not 500MB, right? ;)

  Well, the Tecra A9 already supports SATA interface and there is no limit of capacity on SATA interface, so you can install a 500 GB HARD drive or more (750 GB, etc.). Just make sure that it s 2.5 SATA HDD.

  You can choose each brand of HARD drive because each model will not work. You can buy a Toshiba HDD, Western Digital HARD drive or another. No problem ;)

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Qosmio X 500 - 10W - can I replace the HARD drive with another?

  Hello

  I have a Qosmio X 500 - 10W with two drive HARD Toshiba MK5055GSX 500 GB 5400 RPM 8 MB? SATA II but is one of the hs so I'm wondering if I can be replaced by a more powerful style, drive HARD 750 GB 7200 RPM / min 16 MB Toshiba courses?

  Thank you

  Hey,.

  Your question is a bit hard to understand, but I think you want to replace the HARD drive with another (faster) model, right?

  Well, that s no problem. 7200 RPM hard drives works, they are a little stronger, but they're faster so if you need more performance without problem.
  750 GB or more are also no problem because the SATA interface is not the limited capacity. Theoretically 1 TB or more should also work.

  Anyway, you can buy the 750Go you mentioned that it will work. :)
  ?

• I have the network wireless with an extreme airport using my base station that dessert 4 Airport expresses. I want to replace the base station with a time capsule from apple.  Are there specific instructions other that connect the new time capsule

  I have a wired to the internet using my base station for 4 expresses the hard extreme airport.  I want to replace the base station with a time capsule.

  It is also easy to replace the existing base station and adding the name of the network and the password?

  You should be able to transfer your configuration of your current access point to new, and then you would just set up the internal drive, try to look at these articles:

  ith-new http://www.TechRepublic.com/article/apples-Airport-extreme-out-with-the-old-in-w.

  -one-airport-extreme-or-time-capsule-to-http://www.iclarified.com/31189/How-to-Transfer-Your-configuration-settings-fromanother

• ThinkPad Edge S430 - is possible to replace the hard drive with an ssd?

  Hey, Lenovo,.

  I bought a Thinkpad Edge S430 and wonder if it is possible to replace the hard drive with an ssd?

  Kind regards

  Mikael

  
  

• I just bought a Logitech Web c110 camera and every time I try to install the installer crashes. Also, I was making the blue screens with different messages on them.

  Original title: how to find missing or corrupt files on windows xp pro

  I just bought a webcam logitech c110 and whenever I try to install the installer breaks down and I was doing the blue screens with different messages on them... How to scan for missing or corrupted files?  My brother-in-law has built this computer for me and I did not all disks for windows xp pro. system that is on it

  Hello

  1. you receive an error message while trying to install the webcam? If so, then post back the exact error message.
  2 are you able to install any other software?

  Try to capture the error message on blue screen and after return the exact error message. This could help us help you better.

  Step 1: Try to install the webcam software in clean boot state and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• Startup problem: first black-wallpaper appears with the logo, and then the screen goes to the Microsoft screen with green moving bar "Please wait".

  My computer is having problems loading the main office. I start it up, the first black-wallpaper with the logo is displayed, then the screen goes to the Microsoft screen with the green bar of movement. After that, the Windows logo appears and makes the sound. A new screen will appear with a "start-up Fund" and he said: "Please wait...". "This form of lasting about 5 to 8 minutes, then the text disappears, with only the bottom upward. I left it sitting there on the blank screen for about 20 minutes, and still nothing changes. I tried Ctrl + Alt + Delete, and shows nothing. Finally restart manually, but the same problem occurs. The only way that this works is in Mode safe mode with networking (which is currently used). I also tried the system restore, but this does not work because by default it must go through the same problematic steps, as mentioned previously.

  Hi ninja_panda13,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  As you are able to boot mode safe mode with networking, put your computer in a clean boot state in order to verify if any third-party application is causing this problem.
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See KB Microsoft article below for more information on how to solve a problem by performing a clean boot in Windows Vista or in Windows 7:How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• I get the blue screen with the exception of system Service in Windows 8. It seems that many people have of it.

  I get the blue screen with the exception of system Service in Windows 8.  It seems that many people have of it.  I can't use my computer without losing all the data every few minutes.  It is brand new.  Fix?  It often happens with Firefox, but other times too and restarts sometimes when you type an e-mail in the e-mail of Windows 8 program.

  For this recent System_Service_Exception error, if you have an AMD graphics card try the next tool from AMD to try to get the latest graphics driver:

  http://support.AMD.com/us/gpudownload/Windows/pages/auto_detect.aspx

  According to me, a recent update of Windows, maybe the 2778344 which updates win32k.sys to the 6.2.9200.16503 version, could cause a conflict with the AMD graphics driver.

  Many users report the same error recently and so far have all AMD/ATI graphics cards.

  If all goes well the graphic driver update will help.

  If the problem persists, consider uninstalling 2778344.

  Then, at the moment, 'hide' 2778344.