Satellite P10 804 will not accept the upgrade of RAM

Apologies, this is it is a bit long and also if this question has been covered elsewhere here: I had a good nose autour and have not found something that seems to help.

In any case, I had a Satellite P10 804 during these past years, I bought in the United Kingdom.

Quite early in my time with this laptop, I upgraded the RAM. It was 3 or 4 years ago, when memory was not as cheap right now, so I bought just a single 1 GB module. P10-804 will take up to 2 GB of RAM.

The P10 804 came with 512 GB as standard in two modules. My upgrade means I got 1.25 GB, which was in very good health. Everything was fine until the end of last year when the defective laptop; I followed the fault in module 1 GB of RAM. It was a bit awkward since I now live in New Zealand. However, the provider of the RAM was very professional, stood by their warranty, and we arranged a swap. RAM prices had fallen, so I bought another module of 1 GB at the same time upgrade the laptop completely.

Now the problems really started. The laptop would not simply work with the new installed RAM modules. It would work with one alone, nor even less with my old configuration of a module of 1 GB and 256 GB module. Start and run for five minutes before a freeze; white screen with fans roar; blue screen; frozen screen normal with strange objects; No start at all. everything.

Everything that works now is my original 256 MB module (his partner disappeared). This leads me to assume that I don't have some sort of hardware failure?

1 GB modules are DDR333 SODIMM, CL2.5. This laptop will also have the DDR266 modules, and it has been suggested to me, lower speed might work. I can try this option since the RAM prices are * really * low now, especially if I get confirmation of this as a valid strategy possible.

The laptop BIOS is updated to v2.00 (maybe?), and I also upgraded the HDD to a 120 GB unit (this works very well and is partitioned for XP and Linux). And from time to time I empty the fan.

Any advice welcome. Thanks for reading.

> The laptop would not simply work with the new installed RAM modules. It would work with one alone, nor even less with my old configuration of a module of 1 GB and 256 GB module. Start and run for five minutes before a freeze; white screen with fans roar; blue screen; frozen screen normal with strange artifacts; No start at all. everything.

Reading your message, I came to the conclusion that this issue must be linked to the new RAM module and this module is malfunctioning or is not fully compatible with your laptop.

The P10 can be upgraded to 2 GB, so you should be able to use two single RAM 1 GB modules

So it must be a module problem

Tags: Toshiba

Similar Questions

  • Pavilion 1050NL PC will not accept the upgrade of ghraphics GTX760

    Hello, I replaced the graphics card, but when I switch on the PC, I only get the splash screen and a beep and the system will not continue to start, after a while, I get 3 beeps and stops?

    I also replaced to 500W power supply before and the PC works fine with the old graphics card.

    I placed the new graphics card in another older Pavilion and to work?

    This model of PC is not allow different config. by the BIOS? or something like that?

    Or maybe the power is not enough?

    Thanks in advance for your help :-)

    Ruud

    Ok.

    It just means that the motherboard does not work with the video card. You could try to return as incompatible video card and opting for ATI Radeon model for better compatibility.

  • Satellite A100-289 - does not accept the second module RAM

    Hello
    Sorry for my bad English

    I have a problem with my RAM secend slot. At the first bank i installt 1 GB 533 MHz DDR2 RAM in the second Bank too. The laptop starts but when I installed the second RAM after the BIOS Windows screen accepts 2 GB of RAM.

    [PC-information]
    Modellname Satellite A100
    TEILENUMMER PSAA9E-11H047GR
    Serial number 96304832Q
    BS-Version Microsoft Windows XP Professional 5.1.2600 Service Pack 3
    BIOS 6.00 version
    Processor Intel (r) Core (TM) 2 CPU T5500 @ 1.66 GHz

    Hello

    > but when I installed the second RAM after the BIOS Windows screen accept 2 GB of RAM.
    This means that you install RAM modules while the laptop is running?
    I m wondering your laptop still works. Normally, you could destroy the whole motherboard and the module.

    Anyway, to me it sounds like that your laptop isn't compatible with the memory modules vive. What modules do you have exactly?
    I have good experiences with the Kingston modules.

  • My laptop is level and returns then the previous version of Firefox. He will not accept the upgrade. Why?

    I have Firefox as my preferred browser. And I tried to upgrade several times. Whenever Firefox welcome for doing, but then when I open Firefox browser the next time, it returns to the previous version.

    What security (firewall, antivirus) software do you have?

  • Satellite L30-134 will not accept 2 GB of RAM

    I looked at my laptop and it takes a maximum of 2 GB of DDR2 RAM, I tried two different pairs of sticks of 1 GB and the two blue screen that loads the OS.

    When the sticks do not go it simply ignores the second run, but I can't seem to accept 2 GB.

    BTW I have upgraded to a core duo processor, don't give me no problem.

    Known fixes for this problem?

    Hello

    Your laptop can be upgraded up to 2 GB of RAM. That s is definitely possible!
    You can use 2 modules of memory vivid x1024MB.

    If you would taka glance at this page, you will find information that you must use the DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM modules.

    [Memory for Toshiba Satellite L30-134 | http://www.orcalogi.co.uk/asp/prodtype.asp?prodtype=25737&ft=m&st=3]

    I presume that you always get a BSPD because the RAM modules are not fully consistent or simply malfunctioned.

    Welcome them

  • On my old e-mail account I could insert a list of addresses by putting the list name in the to: my new email account will not accept the list names. How can I fix th

    My old Thunderbird e-mail account has been with Time Warner,
    SC. RR.com. my new second account) is with AT & T, ATT.net.

    In my old account I could give a name to a list of multiple e-mail accounts, put the name of lists at the BBC: and send email to everyone on the list.
    My new account will not accept the name of a list. He insists on the format of a single e-mail account. I tried to create a new list after closing the old account and open the new one, but the results were the same.

    How to make 'list' to work on my new ATT account?

    I'm glad to hear that your problem has been resolved, please select the answer that solved the problem. This will help other users with similar problems more easily find the solution.

    Please contact the Mozilla Support!

  • I have never installed my MS when I bought my PC and now it will not accept the product key, how can I get a new key

    I have never installed my MS when I bought my PC and now it will not accept the product key, how can I get a new key

    What "MS"?

    Microsoft is a company, not a product.

    To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
    (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
    Once saved, run the tool.
    Click on the button continue, which will produce the report.
    To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
    -* in your own thread *, please

    Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
    http://www.Microsoft.com/en-us/howtotell/hardware.aspx

  • Windows Vista Home Premium Activation, will not accept the product key

    I bought a HP Pc several years ago, Windows Vista Home Premium has been and is still on it, now it says I need to activate but will not accept the product key to activate.  It messed me up, I can't get to my desk top.

    1. activation by phone
    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    Pay attention to step 2: how to do a phone Activation.
    Note: If the activation service will inform you that it was
    unsuccessful and cannot help with activation, thenSTAY ON THE LINE and your
    call will be transferred to an operator of activation that will help you
    activate your copy of Vista.

    2 here is a response from Keith, Microsoft Support,
    Moderator, on this subject.
    Date: April 29. 2010

    3. how to activate Windows Vista
    http://support.Microsoft.com/kb/940315

  • Windows7 will not accept the product key for activation

    Windows7 will not accept the product key for activation after a clean reinstall of the o/S.i. to pass messages to the effect that the product id is not valid for activation, even if it's the OEM product key. Enter the key manually and the telephone audit failed. Any ideas?

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • Try to install adobe photoshop elements 7.0 on the new computer. Will not accept the original serial number?

    Try to install adobe photoshop elements 7.0 on the new computer. Will not accept the original serial number?

    Move the thread to Photoshop Elements

  • I bought a new computer and also Adobe acrobat Pro XI.  It did not work properly.  I uninstalled and tried to reinstall it, but the computer will not accept the serial number.  What can I do?

    I bought a new computer and also Adobe acrobat Pro XI.  It did not work properly.  I uninstalled and tried to reinstall it, but the computer will not accept the serial number.  What can I do?

    You accidentally type in a redemption code when he says he only wants a serial number?

  • Satellite P500-1DX will not accept password

    Satellite P500-1DX - Windows 7.
    Not connected this morning no problem, return to work will not accept password.
    Had not implemented the password reset disk, but have one created from my old laptop which is vista OS.

    However, when I enter the P500 it runs the wizard and an error occurs.
    The laptop has perfectly to update Norton 360 on it is probably not a virus.

    All ideas

    Hello

    What password do you mean exactly?
    BIOS or Windows user password?

    If you're talking about BIOS password then I have some bad news for you; You cannot reset a unknown BIOS password. Only a Toshiba ASP technician may remove unknown BIOS password.
    But if you talk to windows user password, then you could reset/clear the password by the new installation of the operating system for this you can use a HARD drive recovery option.

    PS: I found this article on resetting a password account user in Vista or Windows 7. I did not try it, but some people on the net reported that the account password could be changed successfully
    http://www.Vistax64.com/tutorials/102005-reset-user-account-password.html

  • Satellite P10 804: how to remove the HARD drive?

    I would like to remove the internal hard disk of 60 GB of my satellite P10 804 and replace it with a bigger drive, but cannot find a way to enter in the case of removing the HARD drive.

    Does anyone have the details on how to do?

    Hello

    To my knowledge, the HARD drive must be placed under the optical dirve.
    To remove the HARD drive, first remove the battery and the optical drive, and then follow the steps below:

    1. remove the four black screws that anchor the shield of aluminum covering the HARD drive and pull it out.
    2. gently pull on the HARD drive the front panel of the computer to disconnect the system board, then pull it out.
    3. remove the four silver screws that attach the HARD drive to the HARD disk case.

    But be careful. If you have no experience ask someone with more experience in these replacements.

  • Satellite 2410-303 will not read the product recovery CD

    My satellite 2410-303 will not read my product recovery CD.
    When I turned off my pc with the drive in, I get messages saying that the disk is not formatted correctly.

    Hello

    It of weird, is your CD the other disc drive? Have you tried to read your cd of restoration with another computer? If the same error occurs on another computer system, then the cd is probably defective.

    Just a question: I guess you want to recover your machine, Don t you?

    See you soon

  • Blackberry enterprise server configuration will not accept the connection.

    Original title: remote terminal BlackBerry or resource will not accept connection

    Blackberry enterprise server configuration

    H

    1. What operating system is installed on the computer?
    2. What exactly are you trying to achieve?
    3. What is the full error message received?
    Since your post looks like this, the problem is related to the server, Blackberry enterprise server, that's why I suggest you to report the issue to the links below for assistance:
    I hope this helps!

Maybe you are looking for

  • Can I import bookmarks of roboform

    Is it possible to import my favorites of Robo form Fire Fox?

  • Updated earlier - stuck download (OSX)

    I have old 30000 + jpg-pictures in my library of Photos that I've "consolidated" in my library, but they will not be downloaded to my library to iCloud. I have tried rebooting my iMac and stop/start the Photos app with no luck. I filtered the photos

  • OSX update won't hurt my bootcamp?

    I have 10 Windows installed on my macpro for purposes of games.And I installed on my mac of Yosemite score, if I'm going to el capitan will lose I have my Windows partition?

  • NEVER BUY ANY HP PRODUCTS AS THE COMPANY HAS NO INTEGRITY

    I have notebook G42 I bought are 3 months of HP direct, there is. The first month went great, then came the fritz that the computer would be completely white. Yesterday I was finishing my college paper and hard drive suddenly crashed, and that was th

  • BasicEditField cursor scroll Position up vs down

    Hi everyone: the screen of the application has BasicEditField 5 Before submitting the data, the user wants to change one of the entries. When scrolling to the TOP with the trackball, the cursor appears AFTER THE LAST tank in the field. When scrolling