Pavilion 15 n-010tx: backup

Similar Questions

• HP Pavilion 17 Notebook: Recommended backup services

  I would like a recommendation for a back up (Cloud Service). I read some reviews on some services, and there have been problems with some tΘlΘchargement backups. Someone out there have experiences with these services and give me some suggestions.

  It is certainly

• laptop drive HP pavilion didn't not backup

  Hard drive failed, and no disc came with the laptop. Foolishly we did not a backup. I have an ssd that is installed now and do not have the product key of windows 7 to the rear of the machine (although we have upgraded to windows 10. How to make a copy of windows to get the machine up and running again?

  If the product key is present, create a USB key to install windows 10:

  USB Flash Drive - create to install Windows 10 - Windows 10 Forums

  Use the most recent ISO present on the MCT/Techbench and the key should be accepted as long as the motherboard is the same.

• SSD not recognized

  Just got an OCZ 240 GB SSD for my Pavilion DV7
  deleted my backup HDD and pluged in the SSD, rebooted the machine very well, but he does not see the SSD.
  What should I do?

  @Flashphill

  That's all.

  When you access the Disk Manager it will appear with a new HARD drive.

  REO

• How backup windows pre-installed on HP Pavilion G6 laptop computer 2302ax 8?

  Hi, I have a laptop HP Pavilion G6. The laptop came with a copy of pre installed Windows 8. I need to create a backup of the operating system so that I can re - install when the current operating system breaks down one day. Is it possible to find the product key so that I can install windows from a disc using this product key?  If one can provide any useful information please help.

  Hello

  The product key is embedded in the BIOS. You won't need to write to reinstall W8 OEM.

  Here is a link that should help you about making a recovery media.

  http://support.HP.com/us-en/document/c03481733

• HP Pavilion Notebook - 15-p206: Windows 8.1 backup

  My HP pavilion Nooteboom knows the windows 8.1 operating system. This laptop is to have pre defined 24.4 GB as recovery partition.

  Now, I want to take backup of the operating system windows 8.1 in USB key. So I can copy this recovery disk and paste it into the USB key to resume upward.

  Please advise...

  You really need to create usb recovery media.

  In applications, find HP and under HP, you should see the HP recovery media creation utility. Click on it.

  

  Run the utility and follow the directions.

  Once you have created the usb recovery media successfully, you can delete the recovery partition if you feel you must.

• Pavilion dm4-3090se: how to use the SSD after restoration of the system of Windows backup disks?

  Hello

  After a lot of work, I finally could restore my OS using Windows backup disks that I created a few years back. (The OS has been corrupted when the power has been accidentally deleted from the system and the battery was dead)

  Restoring backup widows put everything on 444 GB C drive.  Nothing I put on the SSD drive d:-20 GB and there is nothing in the tools of HP E: drive - 4 GB

  How can I make use of the SSD drive to help speed up the system?  I see the system starts and runs more slowly now.  I'm ready to blow the current operating system and re-run the Windows backup utility.  But I need to know how to use the SSD during the restoration.

  Any help is appreciated.

  Thank you

  Bob

  Hey @llebrez,
  
  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you have some information about using the SSD in your HP Pavilion dm4 Beats Edition Entertainment Notebook. I'd be happy to help you with that.

  The SSD in your laptop is used for a technology called Intel Smart Response. Intel Smart Response uses the SSD as a type of Cache smart to help load the items faster. The reason why that is not used currently is because the restoration of the system is not designed to use the SSD for intelligent caching and is not able to establish that on its own.

  If you want to configure Intelligent caching on your laptop, you can follow this guide provided by overclock.net: how: implement the Intel Smart Response Technology (SSD caching)

  I hope this helps. If you have more questions that I'm able to answer for you, please do not hesitate to ask.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!
  
  See you soon.

• HP Pavilion g6-2298nr: when HP Recovery is not available... the system using Windows 8 as image backup?

  I would like to start with a big shout out to Paul T for his VERY useful thread here!

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Windows-8-product-key-for-pavil...

  Family of a friend asked me to work on their laptop, because I know more about computers they do... they are people very well, was happy to help out, but true to form, like many PC users, they did not bother keeping the documentation provided with the laptop (HP Pavilion g6-2298nr), or they bother to burn recovery using HP DVD built in recovery software which is comes standard on laptops... If I am interpreting what HP's Web Site had to say about the laptop model HP Pavilion g6-2298nr, correctly, she is the serial number it is no longer eligible for free technical support and I have to pay a fee just to talk to someone and to order recovery of the HP DVD (family friend bought in Dec 2014 so it seems REALLY odd that I wouldn't be able to just order) DVD recovery without having to pay tech support a tax just to ask to order the recovery DVD!  .. But anyway...) ...

  Where was the product key "integrated" in the BIOS really comes in handy!   I crossed my fingers, used the method mentioned in the thread linked above, and it worked!   ... have to admit it was a bit strange at first, do not use the product key sticker like the old days, but I can see how it works better in the long term - helps prevent piracy, you don't have to worry if someone who do not realize the importance of product keys thumbnail it takes off and he throws...

  Unfortunately, it seems that when you reinstall Windows in this way, you lose the HP Backup and Recovery program ... in this case my friend family had the misfortune to pay someone to repair this laptop which has not bothered to tell them "Hey, I replaced the hard drive that goes wrong but if you don't get a laptop cooler for this sucker to the laptop just going to overheat again." ... of course, the money they paid what we call 'tech technician' who went down draining when the laptop fried a second drive hard, or maybe the tech them faced with a bad hard drive, who knows? (technology bought a hard drive OEM off ebay)...

  ... Sorry to sound harsh about this type of technology, I must confess I only worked in the field of PC repair for a few months more than a decade before letting him make a stay-at-home-dad (wife is a pharmacist so I'm lucky enough to be able to stay at home) so my experience is VERY limited compared to other people... but the back then I have always treated my customers the way I would treat a friend , and if it's a friend of you offer advice on the prevention of such problems in the future... this laptop gets HOT like you wouldn't, I seated him on a very reliable laptop cooler (slab thickness of aluminium which does a great job as a radiator with the fans, this one)

  http://www.Newegg.com/product/product.aspx?item=N82E16834953038

  "(and I left my friend's family know in no uncertain terms that they need to order this laptop cooler if they use this laptop...).

  Replace hard drive, I installed seems to work very well, but of course it is not an "official WD hard drive"... when I tried to install the software of cyberdirector photolink for example on the link below, received an error message "this is not a WD hard drive so cannot install this software"...

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model...

  that is fine I really don't think my friend family cares about this program... but it makes me wonder, even if I did trust the download at this link below

  http://www.TechSpot.com/downloads/5190-HP-backup-and-Recovery-Manager.html

  If program HP Backup and Recovery manager would work even first because it is not an official hard drive WD (I also ordered a hard drive OEM off ebay .. but does not support the family of my friend for the drive hard because they were good for my munchkins and did not want to pay through the nose for a more expensive hard drive so of course I tried to minimize my own...)... I also think the type of program is based on a "C" and "D" drive is set up as if it were when the laptop comes with the original hard drive and saves a copy of the backup on the disk "D"... I guess I could use disk management to create a different partition, label it "D" and see if HP Backup and Recovery work, but it seems a bit... questionable... not to mention that I feel uncomfortable to download something that is not directly on the HP Web site as an "official"... download

  I know that Windows 8 has a utility of 'image system' built-in that allows you to do exactly that... an image of the system... as I said my friend family is good people, but I'm guessing that sooner or later they're going to screw up this laptop by pulling again as do many users of the computer... it would be nice if I could burn a system image of what is on the laptop now on DVD and hang on, then when they come back to me screaming in the future ' help, laptop does not work yet! I can just restore the system image on DVD instead of having to go through the hassle of reinstalling Windows, graphics/audio/drivers etc., zillion Windows updates and an etc. all over again.

  What I was asking, that is... would this even work?    I have never tried to use the image of the system in a situation like this with the product being key ' built in ' BIOS, this kind of thing is brand new to... worth me burning the DVDs and hung their just in case where?

  Sorry for the long essay and thanks in advance to anyone who actually takes the time to read all this!

  Hello:

  Yes, which makes a system image will work.  I do it all the time.

  PC GE set up the way you want and make the image of the system and the usb drive recovery you'll need access to the system image, or you can use W8 OEM disk made you (via the menu to repair your computer at the bottom left of the screen install Windows when you start from the DVD) to boot from, and access to the system image.

  If you have the DVD you have to more than one.  Probably not less than 4.

  But as much as to try to submeter a recovery partition, which is not going to work.

  I am very surprised that you cannot order a set of recovery discs HP online at the link below, last line labeled order recovery media.  Some people have reported trying to enter information such as the serial number and the link is dead.  But nothing venture nothing have nothing.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model/5333338

  If this does not work, you can have your friends order a set of this provider no HP...

  http://www.computersurgeons.com/p-24205-Windows-8-64-bit-Supp-1-Recovery-Kit-708649-001-for-HP-Pavilion-notebook-PC-model-number-G6-2298nr.aspx

  I congratulate you for your help in providing your friends with this very time consuming project.

• HP PAVILION H8 - 1280t: backup on another PC hard drive.

  I have to return my computer to HP.  Before I do, I want to remove the hard drive and connect it to my new computer and back up all my files.

  Can someone tell me the settings/connector on the hard drive?  I know that it is must be configured as a secondary hard drive, and I think it means it must be defined as a slave.  I also know that the jumpers on the hard drive set as slave used as a configuration.

  Advice would be appreciated.  I think than tht I have 48 to 96 hours for this task.

  THANKS IN ADVANCE: DAVID HALL

  ALL THE SPECIFICATIONS OF MY COMPUTER ARE LISTED BELOW.

  HP PAVILION SPECIFICATIONS

  H8 - 1280t Intel (Pittsburgh)

  SERIAL NUMBER: 2MD2110TVV

  10 PROFESSIONAL 64-BIT WINDOWS

  Motherboard is a Megatron

  Name of the MOTHERBOARD: IPIWB-PB

  HP/COMPACT NAME: PITTSBURGH

  USB 3.0 Blackbeard HPE 2 x USB3.0 ALBUMS of I/o PORTS + 4 X USB2. O

  POWER: 600 W Μatx ESTAR v5 HF PSU (Petrus)

  Processor: Intel Core i7 - 3930 K CPU

  RAM: 16 GB DIMM DDR3-1600 RAM 4X4GB WE

  Graphics card: AMD Radeon HD 7570 1 GB DDR3 FH PCIe x 16 Eyefinity

  Chipset: Intel x 79 Express

  Processor upgrade information

  • TDP: 130W
  • Socket type: LGA 2011
  • Motherboard supports the following processor upgrades:
  • • 38xx Intel core Quad (Sandy Bridge-E) processor
    • Intel 39xxK processor with Six cores (Sandy Bridge-E)
    • 39xxX Intel processor with Six cores (Sandy Bridge-E)
    • Intel i7-38xx Quad core processor

  Memory upgrade information

  • The four-channel memory architecture
  • Four DIMM DDR3 240-pin connectors
    NOTE:
    Two of the four DIMM slots are not extensible, because the liquid cooling system must be removed to replace the memory modules. Liquid cooling system is not available on all models.
  • Supports the following:
  • • PC3-10600 (DDR3-1333)
    • PC3-12800 (DDR3-1600)
  • Memory non - ECC, unbuffered
  • Supports 1 GB, 2 GB, 4 GB and 8 GB DIMMS
  • Supports up to 4 GB on 32 - bit systems
    NOTE:
    32-bit systems cannot resolve a full 4.0 GB memory
  • Supports up to 32 GB on 64 - bit systems
    NOTE:
    Maximum memory shown reflects the ability of the material and may be more limited in the operating system.

  Video

  Graphics

  • Integrated graphics is not available on this motherboard.
  • Two PCI Express x 16 slots (Gen 2.0)

  Expansion slots

  • Two PCI Express x 16 (Gen 2.0)
  • Two PCI Express x 1 (Gen 2.0)
  • A PCI Express Mini Card

  I/o Ports and internal connectors

  Rear i/o ports

  Figure: Rear i/o ports

  • S/PDIF
  • USB 2.0: 4
  • LAN (ethernet)
  • USB 3.0: 2
  • Audio: central/subwoofer
  • Audio: output rear speaker
  • Audio: speaker output side
  • Audio: line-in
  • Audio: output
  • Audio: microphone

  Internal connectors

  • 1 x ATX power connector
  • 1 x EATX 12V power connector
  • 1 x CPU fan connector
  • 1 x system fan connector
  • 1 x connector for fan VRM
  • 1 x connector for pump fan
  • 6 x SATA 3.0 connectors
  • 1 x connector audio front panel
  • 1 x connector recovery ROM
  • 1 x SMB connector
  • 1 x front panel connector
  • 3 x USB 2.0 connectors
  • 1 x USB 3.0 connector

  Configuration jumpers

  CAUTION:

  Don't change any rider when the computer is turned on. May damage the motherboard.

  Clear the CMOS settings

  This motherboard has a jumper to clear the Real Time Clock (RTC) RAM in the CMOS.

  1. Turn off the computer and unplug the power cord.
  2. Move the jumper to clear for 5 to 10 seconds, then move the jumper to return by default.
  3. Plug the power cord and turn on the computer.
  4. At the next boot, enter the BIOS to re - enter the user parameters.

  Erase PASSWORD settings

  The BIOS password is used to protect the settings of the BIOS against unwanted changes.

  To clear the password BIOS follow these steps:

  1. Turn off the computer.
  2. Move the Clear jumper.
  3. Turn on the computer to POST screen
  4. Turn off the computer.
  5. Move the jumper to the default return
  6. Enter the BIOS to check or set the new settings

  If the host computer does not start, it's a maybe clone, depending on the reason for the "no boot".  If it's because of a hardware problem, so it might still work, but the best way is to use another computer and connect the hard drive to the PC using an external adapter USB to SATA, THE problem: http://www.amazon.com/SANOXY-A12940-Drive-Adapter-Converter/dp/B001OORMVQ

  Then clone it on an external hard drive or use software backup, or both, just to be sure.  You said that there is an another computer available, then go ahead.

• Pavilion dm4 2191us: restoring a backup made with HP Recovery Manager - data recovery manager has since been removed

  My system (portable Pavilion dm4, Win 7 Home Premium x 64)) is works well but I would like to restore a backup of data made with HP Recovery Manager. HP Recovery Manager has since been removed from the system and I don't have a recovery disk. I tried to install sp45415 that supposedly runs a silent installation for the Recovery Manager program, but it fails silently on my system. The notes say that it applies to Windows 7 computers and the Pavilion dm1 and dm3. There is no mention of the dm4.

  Y at - there a trick to getting sp45415 to work properly?

  Y at - it somewhere that I can download an installation package for HP Recovery Manager that works on the Pavilion dm4?

  Is there another tool that can restore the backup made by HP Recovery Manager?

  Thank you!

  If you have uninstalled Recovery Manager he probably removed the recovery of files in the recovery partition. When these files are not deleted download Recovery Manager will install. You will need a recovery media to boot from to restore the files and the recovery partition. If you do not have a recovery media you order from HP.

  As for the files you are trying to restore - if it's a backup of personal files, photos, etc. to the outside hard disk or DVD must be a file .exe inside these files, probably of Restore.exe or Recover.exe. Double click on the .exe will extract files to a folder on the hard drive of your laptop.

• How to make a backup of operating system vista Home premium on hp pavilion entertainment pc

  I need or want to make DVDs to backup my operating system on an H - P with windows vista home premium on a Pavilion P P C h. Entertainment is the latest version with the built in webcam.

  Hello

  I'm sorry, but you can make a backup of the computer with Vista Home Premium using the Vista operating system.

  Only Windows Vista professional, comprehensive and company have a more advanced backup and restore utility called Windows complete PC Backup and Restore.

  For this you will need to program 3rd group.

  It is a program that must be bought:

  http://www.Acronis.com/homecomputing/products/TrueImage/

  There are other free programs to do this, but I them haven't used lately to recommend.

  If you wish to only have a way of reinstalling Vista again, HP has a recovery partiton of the recovery disks from.

  It's the HP of the information on how to do it:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00882383&LC=en&cc=us&DLC=en

  See you soon.

• Backup for Pavilion G6-2321el image

  Hello guys, I strongly need a backup for the Lalonde HP Pavilion 2321el G6 image well as I didn't write it to a disk when I could... If please if anyone can download somewhere and link it to me, thank you.

  Hello

  You can use the built-in Windows backup to create the image of your system:

  http://Windows.Microsoft.com/en-AU/Windows/back-up-programs-system-settings-files#1TC=Windows-7

  Please also read:

  http://www.howtogeek.com/HOWTO/4241/how-to-create-a-system-image-in-Windows-7/

  Kind regards.

• Pavilion dv6-3216us: backup of Partition D: / (RECOVERY)

  I have a Pavilion dv6 3216us with a HD of 320, which was always full... of a few days ago, just at the moment where I realized to free up space on this drive Im getting a message from Windows saying the HD are damaged... Everything works fine and I bougth a different HD, this time with 1 TB... I saw that inside the bad HD, there are 3 partitions if im not wrong, they are called the 'System', other than "C:" and the third title of "RECOVERY." The question is:

  How to 'transfer' as the old partitions to the new HD? How to back up the partition recovery in the right way, or at least the best way?

  Thanks in advance.

  You need create the backup of the recovery discs recovery partition. Then you install the new hard drive and booting from the created disks.

  Recovery media creation > Windows 7

• How can I backup and replace my hard drive crashed on a Pavilion a350n with XP?

  HP Pavilion a350n with Windows XP desktop computer. System has crossed a CHKDSK scan, had a lot of mistakes, and then when he did checked, an American Megatrends screen came with the State and low said

  "Master hard disk: S.M.A.R.T. Status: BAD press (F1) for installation, (F7) continues.

  Want to know how to proceed that I begin to press the buttons and screw something up. Thanks in advance for any help you can give...

  88feederups wrote: desktop HP Pavilion a350n with Windows XP. System has crossed a CHKDSK scan, had a lot of mistakes, and then when he did checked, an American Megatrends screen came up with the State and at bottom says "Master hard disk: S.M.A.R.T. Status: BAD press (F1) for installation, (F7) continues. Want to know how to proceed that I begin to press the buttons and screw something up. Thanks in advance for any help you can give...

  Hello 88feederups, apparently, your only recourse is to press F-7 to continue and see if the system boots to the desktop.

  If you manage to get to the desktop, I suggest trying to backup your important data and make sure you have a version of Windows XP. You must also consider finding a new hard drive.

  The failed Test Smart can be a reason for the hard drive do not completely, if not already.

  Here is the link for the specifications of your system and it shows the system comes with a hard drive of 160 GB Ultra DMA.

  It is a type IDE ATA hard drive and not the new kind of Sata.

• HP pavilion 2206tx g6: backup and restore

  Sir how full system backup with the installed software and driver and restore tham with output recovery hp because hp recovery maneger not available in my laptop I formatted my leptop Yes hprecovery not avilable maneger

  When I update my pc and backup will help restore all driver software when I save please help them me

  Ok.

  What you create is a custom refresh image. It will include everything was installed. All software as well.

  See the following web page to the How to Geek

  http://www.howtogeek.com/108944/how-to-create-a-custom-refresh-image-in-Windows-8/