Pavilion 15 P189SA: Error Code PLQA3H-7G889S-MFPV6K-60RJ03 - HP Pavilion P189SA 15

Similar Questions

• HP Pavilion 23 "TouchSmart: optical drive error Code 19

  Hi, the optical drive in my HP Pavilion TouchSmart 23 "does not work correctly. In Device Manager it says that it is the result of the conifguration in the registry being incomplete or damaged (error code 19), but I can't solve the problem. I tried to solve by updates driver and verification for the top and bottom filters using regedit, but none of those who were present. I can't find any other possible solutions anywhere. Thanks for the help.

  Hello:

  The only suggestion I can offer would be to go through the troubleshooting steps in the link below you haven't tried.

  https://support.Microsoft.com/en-us/KB/314060

• HP Pavilion dv6 2021TX: error code-72352777

  Enter the administrator password or power on password... hp Pavilion dv6-2120tx... pls help me... error code 72352777. kindly help

  @saget

  Enter 63030379

  Kind regards

  DP - K

• HP pavilion g6: how to the error code of the resolved bios administrator password is 51764946 please help me

  How bios solved administrator password error code 51764946 for hp pavilion g6

  Thank you very much, Mr REO51ST

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...

• HP Pavilion a6530f ' error Code: BIOHD-4 Unitialized/corrompue start structure detected. "

  HP Pavilion a6530f

  does not start:

  Received error Code on following "The PC Doctor Diagnostics"

  "Error code: BIOHD-4 Unitialized/corrompue start structure detected."

  The statement was to: "contact HP support.

  How should I proceed? Thank you.

  Hello @Puntti69,.

  You are indicating your computer is also the message BIOHD-4, is that correct? I'll be happy to help you.

  If you replace your hard drive with a hard drive that is empty, you will also need the operating system disks available. It is rare to come across a store bought a hard drive with an operating system on it because all the software and drivers should be installed on the hard disk.

  Please answer as soon as possible.

  Thank you

• error code 0 x 81000203 Pavilion

  Hi my HP Pavilion p6-2380ea Desktop PC [Windows 8.1] shows an error code that I do not recognize, 0 x 81000203, when I use a Word document, [Office Home & Student 2010] This gave rise to all the functions of the printer [I have two] be disabled when printing from any MS Word document I amable to print from the web however & test the pages from the printer , but the Word turns out be a problem. I contacted Microsoft and they say this isn't a problem that they caused. Wikipedia has an article 'small problem of formatting affects MS Word 2007 & 2010'. I tried the suggestions here does not?   Does anyone have an idea what could cause this and how do I fix this?

  Hi Roger271112,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more. I see that your office has an error message while trying to print from Microsoft Word, and I would be happy to help you! To start, I have to ask you a few questions:

  • Recently upgraded your computer to Windows 8.1?
  • Did you recently did a system restore on your computer?
  • You have installed a new software or hardware in your office?
  • Has your computer finished all his important updates from Windows?

  In the meantime, I recommend that you run the HP print and Scan Doctor on your desk to see if the program detects software or communication problems.

  Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!

  Concerning

• CPU 1326DX Pavilion G7 error code

  I'm working on this machine for my friend.  They initially stripped on it because it gave them an error that says the fan from the cpu had to be replaced.  After I did it, I got the constant flashing error codes.  So I did some research and discovered the design flaw to inherit the mothers on these books.  And considering that the Board was probably hot enough with the failure of fan, I replaced the motherboard.  Now, I'm getting a CPU error code blink.  What is your opinion?  I'm down to replace the AMD processor now, or is there something else I need to check?

  When I replaced the motherboard, I carefully cleaned any thermal paste and replaced with the stuff of money.  I also quadruple checked all my connections... but I am always open to ideas.

  Thank you very much for your help.

  Hi Oorin,

  You can try reinstalling the HARD disk? With the flashing lights continuously, it could be the BIOS.  Have you tested the HARD drive?

  If the HARD drive reinstalling does not help, try reinstalling the memory.

  Have you tried a power reset with the RTC battery removed?

  Let me know.

  Thank you.

• HP Pavilion dv6-7020us: driver error Code 28 problems

  Sorry if this is kind of a long start...

  Read that a cause for Code 28 may be due again installed equipment that poses a problem of incompatibility, so...

  First stop, due to problem of hard drive, adequate to get a hard drive again earlier this year. The new current hard drive is "INTERNAL HARD DRIVES DO SAMSUNG Spinpoint M8 ST 1000 L 1 TB 5400 RPM 8 MB Cache SATA (looks like break after" 1000"and"SATA", that's all I can put in).»

  Got Windows 7 x 64 bit installed.

  Ethernet controller, network controller, peripheral PCI, PCI Simple Communications Controller, SM Bus controller, Bus controller series universal (USB) and x 2 unknown device (one of whom I assume is the fingerprint reader) all fail with the error code 28.

  The problem, however...

  With the help of other computers and the family, I managed to get the downloaded files specifically driver installation for Windows 7 x 64 bit, moved to a USB key, ran the files on my computer (with nonworking pilots / that responded to the questionnaire), they seemed of ran perfectly fine and appeared to install correctly, but none of the enumerated factors do not always work.

  Now currently at a loss to know what to do...

  Properties: Details: Hardware ID: value...

  Ethernet controller

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C & REV_07

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  Network controller

  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00

  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C

  PCI\VEN_1814 & DEV_539A & CC_028000

  PCI\VEN_1814 & DEV_539A & CC_0280

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C & REV_01

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C

  PCI\VEN_10EC & DEV_5229 & CC_FF0000

  PCI\VEN_10EC & DEV_5229 & CC_FFOO

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C & REV_04

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C

  PCI\VEN_8086 & DEV_1E3A & CC_078000

  PCI\VEN_8086 & DEV_1E3A & CC_0780

  SM Bus controller

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C & REV_04

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C

  PCI\VEN_8086 & DEV_1E22 & CC_020500

  PCI\VEN_8086 & DEV_1E22 & CC_0C05

  (USB) Universal Serial Bus controller

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_1818103C & REV_04

  PCI\VEN_8086 & DEV_1E31 & BUBSYS_1818103C

  PCI\VEN_8086 & DEV_1E31 & CC_0C0330

  PCI\VEN_8086 & DEV_1E31 & CC_0C03

  Unknown device

  ACPI\HPQ0004

  * HPQ0004

  Unknown device

  USB\VID_138A & PID_0018 & REV_0078

  USB\VID_138A & PID_0018

  . . . In my view, that it is all information. I'm sorry if I'm actually still lacking some information. Thanks in advance for the help! I look forward to the answer.

  Hello:

  Here are links to the drivers you need in the order you posted devices... just at the height of the sp # with those on your USB.

  Ethernet controller:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56167.exe

  Network controller:

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp57538.exe

  PCI device:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp56166.exe

  PCI Simple Communications controller:

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp56158.exe

  Controller of Bus SM: NOTE: first install this driver and restart.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp56156.exe

  Controller of universal serial (USB) Bus:

  This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.

  File name: sp56164.exe

  ACPI\HPQ0004:

  This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.

  File name: sp61037.exe

  USB\VID_138A & PID_0018:

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  File name: sp56403.exe

• Pavilion pb2310 error code oxc0000034

  This error code can be fixed for free

  I'm afraid that you have to perform a restore factory making recovery via the BIOS or using your recovery discs, if you have created them when you got the computer.

  http://support.HP.com/us-en/document/c03489643

  BTW, your computer model should read p6-2310

• hard drive HP pavilion g6 1325sa error code

  Hi my laptop wifes simply ceased to run correctly the other day, slow to do anything, has been after an update from MS, perhaps coinsidence but when NLB is test Diagnostics HP he has failed the test of shore hard with error code 9LXALM-66 X 755 - MFPX1G-60RR03 AND the CODE 9LXALM-66 X 755-MFPX1G - 60Q 903 when you make the beginning upward any help please

  Hello

  The error codes 24 Smart character or drive Self Test (DST) chess - in both cases, this would indicate that hard is defective and must be replaced.  It is also compatible with the slow performance that describe you

  If your laptop is still under warranty, contact HP (with two error codes) and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United Kingdom, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• HP Pavilion: 0x80072F30 error Code

  I was printing on my HP Officejet Pro 8500 has very well but last print job came up with error Code: 0x80072F30.   Have you checked all connections... have tried both USB and wireless... changed all ink cartridges, turned on.   Still gives this error Code.    If someone has had this message and could figure it out / fix?

  Thanks for any help.   To say that I am really frustrated would be too sweet!

  Deb

  Hi @sgiglass,

  Welcome to the HP Forums!

  I have seen your post about how you get the 0x80072F30 error Code with your HP Officejet pro 8500 a printer. I'm happy to help you!

  Please, try the following steps:

  Step 1: Reset the printer

  In some cases, remove the ink cartridges and the printer reset may clear the error message.

  1. Turn on the printer.

  2. Wait until the printer is idle and silent before continuing.

  3. Unplug the USB cable to the back of the printer. If your printer has a network or a wireless connection, leave it connected.

  4. Remove the cartridges from the printer.

  5. With the printer, unplug the power cord at the back of the printer and the wall outlet or power strip.

  6. Wait at least 60 seconds.

  7. Plug the power cord into the wall outlet.

     NOTE:

     HP recommends connecting the power cord printer directly to a wall outlet.

  8. Reconnect the power cord to the back of the printer.

  9. Turn on the printer, if it does not automatically turn on.

     The printer may go through a warm-up period. The printer lights can blink, and transportation could move.

  10. Wait until the warm-up period ends and that your printer is idle and silent before continuing.

  11. Reinsert the ink cartridges, and then close the ink cartridge access door.

  12. If you are prompted to print a calibration page, do it.

  13. If you disconnected the USB cable, plug it in the back of the printer.

  14. Try to print.

      If the problem persists, proceed to the next step.

  Step 2: The printer Service

  If the previous steps did not resolve the issue, the service the printer.

  Contact HP for service in all countries except Asia-Pacific.

  If you have completed all the above steps and your product still has a problem, service the product.

  Check your product warranty to determine if your product is still under warranty and then go to Contact the HP Support to schedule a repair or replacement.

  Cost of repairs out of warranty products may apply.

  "Source: ' 0xc19a0005" or similar error.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope it's useful!

• HP Pavilion g7: error code 0 x 80070057 web authentication

  When I try to access my web references to retrieve passwords I get an error code 0 x 80070057 #, says the parameter is incorrect.

  Hello @italli66,

  Thanks for the quick response!

  The video is for Windows 7, but you should be able to try the process for Windows 10.  Please let me know if it is your problem.

  Kind regards!

• HP Pavilion dv7-2160ed - blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

  Installed windows 7 - Ultimate (32 bit) and after that, I sometimes have a blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

  And I also noticed that some hardware is not installed to properliy:

  1 base system device:
  PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

  Device base system 2:
  PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

  3 base system device:
  PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

  unknown device 1
  ACPI\ENE0100
  * ENE0100

  unknown device 2
  ACPI\HPQ0004
  * HPQ0004

  Can someone help me with this problem?

  Thank you very much. There is a hard drive problem. With the seagate tools, we could solve the problem.

• PAVILION 20 Office 0xc000000F error code

  can help me on this. 0x000000F error code. F8 leap to the same peak.

  Hello

  Can you give me some information about your problem please? What version of Windows you are using?

  Any other information about the stop code?

  Checkurtech