Pavilion 15: Problem of function keys.

Similar Questions

• HP Pavilion p157sa 15: 15-p157sa HP Pavilion in Windows 7 function keys

  I installed Windows 7 Professional 64 bit on my HP Pavilion p157sa 15.

  I think all is now well, except the brightness keys FN (to decrease F2 and F3 to increase brightness) do not work.

  I installed the drivers as in my previous post (URL at the end of this post) and the details below are currently displayed in the Device Manager.

  Any help would be appreciated.

  Graphics cards / "Standard VGA Graphics Adapter" properties - hardware ID:
  PCI\VEN_8086 & DEV_0A2E & SUBSYS_227E103C & REV_09
  PCI\VEN_8086 & DEV_0A2E & SUBSYS_227E103C
  PCI\VEN_8086 & DEV_0A2E & CC_030000
  PCI\VEN_8086 & DEV_0A2E & CC_0300

  Monitors / "generic PnP Monitor' properties - hardware ID:
  Monitor\SDC4951

  Previous post:
  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-Pavilion-15-p157sa-Windows-7...

  Hello:

  You must install the graphics driver applicable to the keys Fn brightness of work, to adjust the screen resolution and graphics acceleration.

  The first file listed is the automatic installation file.

  https://Downloadcenter.Intel.com/download/24870/Intel-IRIS-and-HD-graphics-driver-for-Windows-7-8-8-1-64-bit

  Laptop all the monitors come as monitors/generic PnP Monitor.  There are no drivers for it.

  In addition, for the rest of the Fn keys, you should install this software...

  This package contains the HP System Event utility for the laptop models running a supported operating system. HP System Event Utility allows the special programming function keys.

  File name: sp70439.exe

  Communicate details

  Exit the: January 20, 2015

  Instead of the version 1.20

• Satellite C850 - 1-5 - problem with function keys

  Good evening

  Since a few days, I noticed on my laptop that I could not do more as before, which is the volume with the button located at the top of the keyboard (F9 - F10) or the brightness. On the square, it's functions F1, F2, F3 etc. who went. I have already tried using parameters and setting key 'special functions' systems, but that worked again, then in "mode F1 - F12", still nothing and I challenged 'special functions', but again without success.

  How to solve this problem, please?

  Can you please tell us what model of laptop do you have?

• Satellite A135-S4527 - drivers needed & function keys do not work

  Hello

  I have a Satellite A135-S4527. But when I got this computer it was without a recovery disk / disk to reinstall Vista and the Vista operating system that was installed was a bloated mess - it has been widely used by a person of lesser intelligence. In any case, I decided to get out the hard drive and put it in my SSD with Windows XP Professional SP3.

  That's when the problems started to flow. It turns out that Toshiba doesn't support Windows XP operating system - I checked the site and was surprised to see a total lack of support for Windows XP (even though Windows XP is the dominant OS and a fortiori when this laptop has been done).

  I managed to get the drivers installed, for everything except the modem. Easier to find drivers were Intel for Chipset / Motherboard and graphic processing of legacy unit. The thing is, I don't know if these are the official drivers and I'm completely lost on the drivers for the modem. Any idea where I can gain more - late and the biggest drivers of all my components?

  There are also some problems,
  -Brightness function keys do nothing
  -Laptop computer sometimes comes out no mode 'sleep'

  What can I do on the brightness keys? The monitor is sometimes a bit too bright to be comfortable to use. Yet, I'll have a chance to make those keys actually do something.

  Any help appreciated.

  Hello

  To my knowledge, this must be a series of Toshiba laptops we.
  Therefore, I visited the Toshiba driver page us to check the availability of driver.
  And guess what? I found this, but unfortunately there is not a lot of drivers Win XP.

  There are Vista and Win 7 but not Win XP drivers.
  I guess that's all that's available for Win XP.
  So what to do?

  I think you should try to install the missing tools which are released for other series of laptop; for example, A105-Sxxxxxx
  Maybe you will get the driver works

  Let's hope. Otherwise, you will need to use the laptop without these functions

• Pavilion 15-ab216nz: f1 - f12 function keys do not work

  Hello

  I shot this Pavilion laptop 15-ab216nz to win 10 to Win 7 64 bit.

  The function keys f1 - 12 do not work - what is missing?

  Thanks for the support

  The problem is resolved. Thanks for your reply.

  As the function keys have 2 different functions:

  (a) Act in accordance with the operating system (release e.g.F3, F5 reload, etc.)

  (b) Act as specific function of material (e.g. dim or bright the screen, increase or decrease the volume)

  (Usually one) is the default (without the combination with the 'fn' key) for b) to use the "fn" EHF.

  This computer works on the other hand, I discovered. There is no need to install the software.

  Kind regards

• How do I access the function keys without having to press the fn on Pavilion g6 series

  Hello

  I just bought a g6 Pavilion and it's all good, except a big problem. For function keys, I have to press on the key fn first! It's horrible! Please fix. It should be easy to fix. This should be configurable. Come on, please don't play with the function keys. We need for programming and many other productivity software where these function keys used regularly. I hope that there could be some obscure settings I can you to reverse this relationship, I want to say I press the fn key only if I need to access the features of HP spare put on the function keys, not the other way around.

  Hello

  Shut down the laptop.  Tap here to f10 you start towards the high access the Bios Menu and make the change that is described in the document at the link below.

  http://support.HP.com/us-en/document/c02035108

  Kind regards

  DP - K

• Function key problem

  Hello

  I use laptop Pavilion g6-2221TU.  OS Win 8

  The function keys are working directly for the activation keys. I read the standard document available on this site. I changed the setting in the BIOS. Disabled the relevant parameter. It did not work.

  Just for the double bond, I enabled and then disabled. In both cases, I don't have to press the "fn" key to increase or decrease the brightness, volume etc.

  Plese suggest the solution.

  concerning

  Pankaj

  A BIOS update is not dangerous as long as you allow it to run and do not power the laptop turned on or off during the race. Also, make sure that you keep the laptop plugged in. I would recommend updated, because it can solve your problem.

• Pavilion x 2 10-n101nv: how to change the function keys

  Hello I have the hp pavilion x 2 10-n101nv, the F function keys selection key works it is light slight increase use and on but if I press the fn becomes F1 F2 F3 f4, how can I change

  Hello

  You can change the default action as follows.

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Bios ( f10 ) option, and then change the figure in the document at the following link.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02035108 & DocLang = in & docLocale = en_US &...

  Kind regards

  DP - K

• Satellite 5200: Function key problem

  Hello

  Recently the function keys have stopped working on my satellite 5200. When I now hold the function key and attempt to use one light you, sounds, etc., buttons, nothing happens.

  Any idea settings or what I've done, I need to check.

  Thank you.

  Paul.

  Hello

  I also had similar problems with a Sat5200 from a friend.

  We have a United Nations - and reinstalled the common Modules Toshiba, Toshiba Hotkey utility and Toshiba controls.

  then it worked again!

  Rudi Bye

• !! Lenovo M490s function keys and hibernate problem!

  Hello world!

  I bought the laptop Lenovo M490s week last without BONES. I installed Windows 7 Professional x 64 retail.

  First of all, I could not find the software that controls the function keys. After installing each driver and software support page (M490s) my function keys does not except Fn + F1 Fn + F2 sleep has turn off the screen, Fn + F6 disable touchpad and the buttons set. Also no information would display on the screen after pressing the buttons - no level volume and shine.

  After some research, I found and installed Hotkey features integration support Lenovo M490 (without S) page. Each function key is started working, information on the screen also start displaying (volume and brightness level).

  Now, I spotted a huge problem, after 3 or 4 hibernation volume and brightness keys (fn + up, down, left, right) stopping just at work! Fn + F1 to F12 key combinations work normal. Then after that restart brightness and volume keys work again!

  Please help me solve this problem, I can't live without hibernation!

  Thank you!!!

  THE PROBLEM IS SOLVED! Problem was in the BIOS!

  I loaded the default Installer and everything is great now.

  In addition, I have all excluded from the boot order except my SSD.

  Computer laptop brand new store had this bug.

• function keys on HP Pavilion

  Hello

  We just bought a HP Pavilion laptop to replace our old Toshiba one (although begins to regret now). One of the most annoying things on the new computer is that the function keys requires that you press the FN key in order to make them do what the function key for decades! That is to say in order to refresh a Web page, you need to press FN and F5. How can I disable this ridiculous? I read something on line on the use of "BIOS" even if I can't find where it is on the computer

  Any help is appreciated until I throw the thing out the window!

  Thank you

  Adam

  Hi Adam,.

  You can change this behavior as follows.

  Shut down the laptop - if you use Windows 9 or 8.1, hold down the left SHIFT key while you click Shutdown to temporarily prevent a hybrid boot.

  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Bios ( f10 ) option, and then change the figure in the document at the following link.

  http://support.HP.com/us-en/document/c02035108

  Kind regards

  DP - K

• HP g72-260us: HP g72 stuck at the start, none of the function keys work how to fix this problem

  Laptop stuck in the market and none of the work of function keys that I tried to unplug the HARD drive and reboot but it remains always stuck in the HP screen and function keys still don't work. what I can do to solve this problem too I just got install a new HARD drive and the operating system. And the driver, it worked very well. then I stopped it and when I went to restart what happened please let me know what to do
  Thank you.

  The hard reset worked thanks for the help!

• Pavilion function keys model 11-n083sa

  I use the software called RPG Maker VX Ace to write games. The software uses the function keys of the Tablet for various things. For example F12 to perform a test and so on. The problem is that the Tablet comes with its own functions - F12 allows on airplane mode and outside. How can I get face to the intentions of my software? Thanks for any help

  Hello

  You may be able to change the action by default of the f keys as described below.

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Bios (usually f10) option, and then change the figure in the document at the following link.

  http://support.HP.com/us-en/document/c02035108

  Kind regards

  DP - K

• Pavilion 15-e070sl: problem with the key "cancelled."

  Hi guys,.

  I have some problems with the key "cancelled." It does not work for a few months. But the more serious problem is that sometimes when I double click on a file or a folder with my mouse compares the window cancellation asking me to confirm moving the file to the trash. This window disappears until I have restart the system. He thus annoyng. It seems that the key 'cancelled' suddenly to work again when I double click on something.

  I hope you find a solution

  With the availability!

  Hi @MichaelMazz ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-e070sl and the keys does not properly.  Select an on-screen keyboard layout using this document , as this could be the problem.

  If this is not enough, try this document on troubleshooting the keyboard. You can watch the laptop marked key stuck section.

  Here is a link to uninstall the keyboard. Restart the computer after the uninstall, it must be reinstalled automatically.

  Have you tried to clean the key or use air to blow the key there could be debris in the key itself?

  I hope this helps.

  Thank you.

• Pavilion Office H8 - 1130: after upgrade to WIndows 10, function key (F2) does not work, delete the folder

  After the upgrade to WIndows 10 the other day, I copied some 30 GB of videos and photos from my phone to a USB connected HDD.

  using Windows Explorer:

  -J' created a new folder

  -Use of function F2 key, I renamed the folder "New folder" to the 2015-16'

  -all good then I copied (low-pressure) the files in this folder

  Once done, I decided to rename the folder in different name

  -J' pressed the function F2 key to rename it, but press ESC' to abandon it

  -the file has been renamed to "new folder".

  -J' then pressed F2 to rename it and the file disappeared!

  -J' checked the trash, not there

  There you go. How can I retrieve these prics

  It is, but I cut/move the files in the DCIM folder on my USB key.

  I found the culprit.  The 'function' key lock keyboard sound, he was in no hurry.  This Microsoft keyboard allowed this option to disabled and completely forgot it.

  I've tried and tested again and this is the reason.

  Thanks for your post