Pavilion 17 - G103DX: error starting the NTFS
I've owned a Pavilion 17 - G103DX for a little more than a month; He got for Christmas. Recently, I've been unable to get into the system due to the receipt of a file NTFS error and then after auto reports a Fat_File_System error. Recovery does not work. I tried a DVD and USB recovery program, and there's only me up before the error comes up again. Any help to fix this would be greatly appreciated.
Hey Donschrum,
Here a link to your service Manual page 49, replace the 1 TB hard drive.
Check the HP warranty to see if Hp will take in charge the repair. All products have a warranty with HP. If it shows in warranty call us. They will be happy to help you immediately.
Please let me know. Thank you.
Tags: Notebooks
Similar Questions
-
Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate. EU tested ps and I was told it was OK. Disconnected from the motherboard except course before directed ps button and the cpu fan has become much brighter, but that's all that happened. Any suggestions on what to check? Checked with VOM push and he seemed to agree. Replaced the MB with the new Board of Directors, that didn't work either. Don't know if it was any good, it was a store Bulletin Board.
All the indicators you mention leads to the PSU, not the Board of Directors.
-
Internal error starting the Virtual Machine after Crash
I'm in Yosemite and when running a virtual Windows 7 machine it suddenly stopped working. The beach ball slider off for half an hour and I was force quit Fusion 7. While trying to launch the virtual machine again, I get a message "Internal error" generic.
Already tried: restart my Mac, repair permissions, uninstall/reinstall Fusion 7, even try to fix the main VMDK file (it is divided and returned without error).
Any suggestions?
Looks like you run your virtual machines from a disk formatted in NTFS by using the Paragon NTFS driver. Have you tried to use disk utility to check the integrity of the NTFS partition? Error messages suggest strongly that the NTFS file system may be corrupted or there may be a problem with the NTFS driver. (I think that the NTFS driver is not available when you used the recovery environment to check disks).
If this volume extracted also OK through the disk utility first aid option, you pourriez either requires an upgrade of your driver of Paragon NTFS since version 11 to version 12 (which their Web site claims is the first version with support of Yosemite), or you may need to set the drive on a Windows machine and have windows to control its own native on the volume file system in Paragon file system audit case missing something.
See you soon,.
--
Darius
-
Hola una nueva actividad add acabo interactiva con UN jsp pantalla UN flow is the try encender el motor hor me saca una ventana erroir respond 'error in the EDL project publication. Reason is deben girl todos los arguments al define the expressions of incoming una tarea pantalla flow invvocacion argumetnos (activity: Interactiva1, task: Interactiva1)
variable set definition of entrada y salida
GraciasHola,
Revisa expressions of los arguments of entrada para el pantalla flow. Con boton derecho sober the actividad interactiva, select the main task, in the lower part debe decir algo como 'expressions of arguments. Debe haber UN "mapeo" para cada una las variables of entrada as definiste para el flow.
Lo mismo para las salida, aunque el error solo menciona las of entrada.
-
Original title: lsass.exe application error.
DELL Dimension 4700 windows xp operating system starts
Lsass app error appears:The exception unknown software exception (0xc0000417) occurred in the application at location 0x008d1b4eI tried to boot from disk to reinstall windows but same error message.Cannot start ins any safe mode or otherwise, Please HELP!Hi pickertop,
Thank you for your reply,
I understand that the issue has not been resolved now. I'm sorry for the inconvenience caused to you.
Exactly how you try to reinstall?I suggest you to explain exactly how do you reinstall Windows.I would be able to guide you in the right direction, once I get the enough information.Kind regards! -
error starting the initial start-up of the installation disc
When I insert the disc into the new system with the new hard drive I get from start-up screen cd and it happens to PXE - E61 MEDIA TEST FAILURE CHECK CABLE then it says PXE - M0F EXITING INTEL PXE ROM then under that it says DISK BOOT FAILURE INSERT SYSTEM DISK AND HITTING ENTER. tried 2 new hard drives and 2 cables again any ideas?
http://www.pcmech.com/Forum/showthread.php?t=82800
Read the above information to the link on the error PXE and Boot options, etc.
See you soon. Mick Murphy - Microsoft partner
-
Error starting the cluster server UCM
Hello
I've got AAU installed 11.1.1.8.0 that runs on a single instance of WebLogic Server named "UCM_Server1".
My requirement was to create a cluster, so I cloned the instance above and named 'UCM_Server2' and adds both the server instance managed by a Cluster ("Cluster_1").
I target all deployments of the AAU to this cluster.
The problem is when I type the url UCM_Sevrer1 it works very well. But, when I hit UCM_Server2 url it displays "Page not found" error
Deployments are in the active state, but during the restart of the UCM_Server2 it shows error below:
< 23 February 2015 14:59:03 IST > < error > < oracle.ucm.idccs > < CMU-CS-000001 > < general exception >
< 23 February 2015 14:59:03 IST > < error > < oracle.ucm.idccs > < CMU-CS-000001 > < general exception
intradoc.common.ServiceException:! csProviderUnableToStartSystem, SystemServerSocket
at intradoc.server.IdcSystemLoader.startProvider(IdcSystemLoader.java:2809)
at intradoc.server.IdcSystemLoader.prepareStartMonitorProviders(IdcSystemLoader.java:2723)
at intradoc.server.IdcManagerBase.startProviders(IdcManagerBase.java:103)
at intradoc.server.IdcManagerBase.serviceStart(IdcManagerBase.java:368)
at intradoc.server.IdcServerManager.serviceStart(IdcServerManager.java:280)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:632)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)
to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)
to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)
to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)
to idcservlet. IdcFilter.init (IdcFilter.java:156)
to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: intradoc.data.DataException:! csCouldNotListenOnPort, 4444
at intradoc.provider.SocketIncomingProvider.startProvider(SocketIncomingProvider.java:254)
at intradoc.provider.Provider.startProvider(Provider.java:87)
at intradoc.provider.Provider.startProvider(Provider.java:80)
at intradoc.server.IdcSystemLoader.startProvider(IdcSystemLoader.java:2779)
at intradoc.server.IdcSystemLoader.prepareStartMonitorProviders(IdcSystemLoader.java:2723)
at intradoc.server.IdcManagerBase.startProviders(IdcManagerBase.java:103)
at intradoc.server.IdcManagerBase.serviceStart(IdcManagerBase.java:368)
at intradoc.server.IdcServerManager.serviceStart(IdcServerManager.java:280)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:632)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)
to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)
to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)
to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)
to idcservlet. IdcFilter.init (IdcFilter.java:156)
to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: exception java.net.BindException: address already in use
at java.net.PlainSocketImpl.socketBind (Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:383)
at java.net.ServerSocket.bind(ServerSocket.java:328)
at intradoc.provider.SocketIncomingProvider.createServerSocket(SocketIncomingProvider.java:548)
at intradoc.provider.SocketIncomingProvider.startProvider(SocketIncomingProvider.java:233)
at intradoc.provider.Provider.startProvider(Provider.java:87)
at intradoc.provider.Provider.startProvider(Provider.java:80)
at intradoc.server.IdcSystemLoader.startProvider(IdcSystemLoader.java:2779)
at intradoc.server.IdcSystemLoader.prepareStartMonitorProviders(IdcSystemLoader.java:2723)
at intradoc.server.IdcManagerBase.startProviders(IdcManagerBase.java:103)
at intradoc.server.IdcManagerBase.serviceStart(IdcManagerBase.java:368)
at intradoc.server.IdcServerManager.serviceStart(IdcServerManager.java:280)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:632)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)
to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)
to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)
to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)
to idcservlet. IdcFilter.init (IdcFilter.java:156)
to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
< 23 February 2015 14:59:03 IST > < error > < oracle.ucm.idccs > < CMU-CS-050021 > < Oracle WebCenter content cannot be initialized inside a servlet environment. >
< 23 February 2015 14:59:03 IST > < error > < oracle.ucm.idccs > < CMU-CS-000001 > < general exception
intradoc.common.ServiceException:! csProviderUnableToStartSystem, SystemServerSocket
at intradoc.server.IdcSystemLoader.startProvider(IdcSystemLoader.java:2809)
at intradoc.server.IdcSystemLoader.prepareStartMonitorProviders(IdcSystemLoader.java:2723)
at intradoc.server.IdcManagerBase.startProviders(IdcManagerBase.java:103)
at intradoc.server.IdcManagerBase.serviceStart(IdcManagerBase.java:368)
at intradoc.server.IdcServerManager.serviceStart(IdcServerManager.java:280)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:632)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)
to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)
to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)
to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)
to idcservlet. IdcFilter.init (IdcFilter.java:156)
to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: intradoc.data.DataException:! csCouldNotListenOnPort, 4444
at intradoc.provider.SocketIncomingProvider.startProvider(SocketIncomingProvider.java:254)
at intradoc.provider.Provider.startProvider(Provider.java:87)
at intradoc.provider.Provider.startProvider(Provider.java:80)
at intradoc.server.IdcSystemLoader.startProvider(IdcSystemLoader.java:2779)
at intradoc.server.IdcSystemLoader.prepareStartMonitorProviders(IdcSystemLoader.java:2723)
at intradoc.server.IdcManagerBase.startProviders(IdcManagerBase.java:103)
at intradoc.server.IdcManagerBase.serviceStart(IdcManagerBase.java:368)
at intradoc.server.IdcServerManager.serviceStart(IdcServerManager.java:280)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:632)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)
to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)
to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)
to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)
to idcservlet. IdcFilter.init (IdcFilter.java:156)
to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: exception java.net.BindException: address already in use
at java.net.PlainSocketImpl.socketBind (Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:383)
at java.net.ServerSocket.bind(ServerSocket.java:328)
at intradoc.provider.SocketIncomingProvider.createServerSocket(SocketIncomingProvider.java:548)
at intradoc.provider.SocketIncomingProvider.startProvider(SocketIncomingProvider.java:233)
at intradoc.provider.Provider.startProvider(Provider.java:87)
at intradoc.provider.Provider.startProvider(Provider.java:80)
at intradoc.server.IdcSystemLoader.startProvider(IdcSystemLoader.java:2779)
at intradoc.server.IdcSystemLoader.prepareStartMonitorProviders(IdcSystemLoader.java:2723)
at intradoc.server.IdcManagerBase.startProviders(IdcManagerBase.java:103)
at intradoc.server.IdcManagerBase.serviceStart(IdcManagerBase.java:368)
at intradoc.server.IdcServerManager.serviceStart(IdcServerManager.java:280)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:632)
at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)
to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)
to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)
to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)
to idcservlet. IdcFilter.init (IdcFilter.java:156)
to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
< 23 February 2015 14:59:03 IST > < error > < ServletContext - > < BEA-000000 > < there is a failed to initialize at the start of the AAU. >
< 23 February 2015 14:59:03 IST > < error > < ServletContext - > < BEA-000000 > < could not start server "server" to the URL by default relative web root "cs".
javax.servlet.ServletException: could not start a deployment of servers of IDC.
to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1268)
to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)
to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)
to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)
to idcservlet. IdcFilter.init (IdcFilter.java:156)
Truncated. check the log file full stacktrace
Caused by: java.io.IOException: Oracle WebCenter content could not initialize inside the servlet environment.
at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:139)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Truncated. check the log file full stacktrace
Caused by: intradoc.common.ServiceException:! csProviderUnableToStartSystem, SystemServerSocket
at intradoc.server.IdcSystemLoader.startProvider(IdcSystemLoader.java:2809)
at intradoc.server.IdcSystemLoader.prepareStartMonitorProviders(IdcSystemLoader.java:2723)
at intradoc.server.IdcManagerBase.startProviders(IdcManagerBase.java:103)
at intradoc.server.IdcManagerBase.serviceStart(IdcManagerBase.java:368)
at intradoc.server.IdcServerManager.serviceStart(IdcServerManager.java:280)
Truncated. check the log file full stacktrace
Caused by: intradoc.data.DataException:! csCouldNotListenOnPort, 4444
at intradoc.provider.SocketIncomingProvider.startProvider(SocketIncomingProvider.java:254)
at intradoc.provider.Provider.startProvider(Provider.java:87)
at intradoc.provider.Provider.startProvider(Provider.java:80)
at intradoc.server.IdcSystemLoader.startProvider(IdcSystemLoader.java:2779)
at intradoc.server.IdcSystemLoader.prepareStartMonitorProviders(IdcSystemLoader.java:2723)
Truncated. check the log file full stacktrace
Caused by: exception java.net.BindException: address already in use
at java.net.PlainSocketImpl.socketBind (Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:383)
at java.net.ServerSocket.bind(ServerSocket.java:328)
at intradoc.provider.SocketIncomingProvider.createServerSocket(SocketIncomingProvider.java:548)
at intradoc.provider.SocketIncomingProvider.startProvider(SocketIncomingProvider.java:233)
Truncated. check the log file full stacktrace
Kindly help me with this.
Thanks Rajeev,
I am confirmed that we cannot have mutiple intradoc port in a config.cfg
For this we would need more of a domain.
-
Photoshop CC 2015.1.1 update, error starting, "the operation could not be completed.
This error has been reported several times in the past month. I am suspect of the most recent update of Photoshop CC 2015 that this error was not a problem before this specific update and I used Adobe CC for years, including Photoshop and have never had a problem.
As reported, during the startup application, I get the following error.
I uninstalled the application by using the uninstall program Adobe (Utilities folder) and have had no success. Error continues. I pressed the "Shift" key to start without third-party plugins (which there should be none after removing the application and preferences. No help. A note that the application, after you click 'OK' to confirm the error opens ever-so-press briefly (perhaps five to seven seconds) but just as quickly crashes.
Honestly, I don't think that there is a problem with Adobe CC by saying given that other current applications (InDesign, 2015, Muse 2015, prelude 2015, Acrobat, etc.) open them all very well. It seems that Photoshop and only the last (current) version.
I suspect that as it is, that this version of Photoshop is more compatible with my older iMac (graphics card). Here's some basic info:
Model: iMac7, 1, Intel Core 2 Duo, 2.4 GHz, 4 GB, MSC 1.21f4
Graphics card: ATI Radeon HD 2600 Pro, ATI, RadeonHD2600, PCIe, 256 MB
Memory module: DIMM0/0 BANK, 2 GB, 667 MHz, DDR2 SDRAM
Memory module: 1/DIMM1 BANK, 2 GB, 667 MHz, DDR2 SDRAM
This simple upgrade can be a more expensive if I am forced now to upgrade my computer . Any help would be appreciated.
It is a known issue, I logged bugs on this subject a few weeks ago. He is still being worked on. The only solution for now is to install the previous version (CC 2015 16.0).
-
Pavilion HPE: when PC starts the printer starts printing a document
I have a printer HP Photosmart 5520. For a few days every time when I start my PC, the printer automatically starts printing a document. It's always the same document.
I think it's something that remains in the memory.
I can't get out. Passing off the coast and on the printer does not help. There is no wainting documents to print.
Hi @ivux,
Welcome to the Forums of HP Support!
I understand that you the same document continues to print on your printer Photosmart HP 5520. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
I see that when restart you the computer does not resolve the issue, I know how it must be frustrating for you.
Is the document something that you sent to print already or is it a diagnosis for the printer page?
If the document is one of your own, it is probably corrupted. To try to resolve this, please follow the steps in the order presented.
Whenever a print job is sent to the printer, a file is created in Windows. Sometimes, these files are corrupted and causing problems. To reset your printing environment, remove these print job files manually and restart the computer and the printer. -
Error starting: 'the bootmgr file missing '.
I was doing a system restore my laptop ok to return to the original state. After he made the closing down and turn, he said that he was missing the bootmgr file. I did not have a system disk, is it possible that I can do a restore using my windows via USB phone?
Original title: the system recovery
Hello
Thanks for posting your query in Microsoft Community and I really appreciate your efforts to solve the problem.
I've certainly you will help solve the problem.
From now on, I suggest you carefully follow the steps provided in the following article and check if you are able to solve the problem. You can use the repair disk that you use to open the command prompt.
Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
Warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
Hope this information is useful. Let us know the results for further assistance, we will be happy to help you.
-
Hello
When I run the Simulator, on the screen, it is showing the following error
"[SOUTH error: cannot verify the package id is not valid, Missing].
Help, please.
This seems to be the same problem as this thread:
-
Cannot start the computer with DISPLAY of ERROR: 0 x 00000024 (0 x 00190203, 0x837C33E80, C0000102,
last time I connect, the NTFS has been runs a check and then close my computer with a SCREEN of ERROR and the COMMAND SCREEN CHECK BONES. All the time when I used the F8 key, it has not started safe mode and all. When I used F10 and F12... He made a QUICK and FULL TEST and said my hard drive 'PASS'... but no way to start the computer. The DISPLAY of ERROR says:
--------
Disable or uninstall an anti-virus, backup utility disk defragmentation. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical information:
Stop: 0 x 00000024 (0 x 00190203, 0x837C33E80, C0000102, 0 x)
------
Help, please! as I have not set up disk or CHKDSK with me. granted access via another computer. My question is: can I download a service pack 3 or installation to start XP Professional, on a USB to do - turn off the anti-virus, backup utility, disk defragmentation?
If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.
This is not the same as recovery disks that may have come to a store to purchase the system.
You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
The ISO bootable image file you need to download is called:
xp_rec_con. ISO
Download the ISO from here:
http://www.mediafire.com/?ueyyzfymmig
Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When you start on the CD, follow the instructions:
Press any key to boot from CD...
Installing Windows... going to pronounce.
Press 'R' to enter the Recovery Console.
Select the installation that you want to access (usually 1: C:\WINDOWS)
You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the
C:\Windows folder that you see in Solution Explorer.
The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.
For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.
In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.
Running chkdsk is fine, even if he finds no problem. It won't hurt anything to run it.
Assuming your boot drive is C, run the following command:
CHKDSK C: /r
Let chkdsk finish to correct the problems, he could find.
It may take a long time for chkdsk complete or they seem to be "stuck". Be patient. If the HARD drive led blinks always, chkdsk is something. Keep an eye on the amount of the percentage to be sure that it is still making progress. It may even seem to go back sometime.
You must run chkdsk/r again until it finds no error to correct.
Remove the CD, and then type "exit" to exit the RC and restart the computer.
You have not to set the BIOS to boot the disk HARD since the CD won't be.
-
Pavilion dm4 does not start: black screen with cursor blinking up to no left, no error message
Nowhere on my HP Pavilion dm4 close last night and does not restart. When I turn on the computer, I get a black screen with a cursor blinking in the upper left corner. I ran a variety of diagnostics and all seems OK (i.e. no error message).
I am able to start the computer in mode 'Media' - and I see all my files. However, I'm unable to start the computer normally. Help, please.
My computer is old - 1 year and 25 days to 25 days outside the warranty period.
Thank you.
Hello
Boot from the new rescue CD, select repair your computer and choose the command line. When this charge, enter the following commands and press on enter after everyone – including spaces as shown.
Bootrec.exe
bcdedit/export C:\BCD_Backup
c:
Boot CD
BCD attrib s h - r
Ren c:\boot\bcd BCD.old
Bootrec /RebuildBcd
Bootrec /fixmbr
Bootrec /fixboot
Remove the rescue CD and try to restart now.
Kind regards
DP - K
-
Cannot start the workstation service, does not work error 1068 (Vista SP2)
HelloIt's about a year I can't start the workstation on my Windows Vista SP2 (HP Pavilion dv9000) service.It fails on: "Error 1068" "the dependency service or group could start.CBS.log sfc/scannow shows messages like:-Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:24{12}]"Mrxsmb20.sys ".-Repair corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:24{12}]"ntkrnlpa.exe ".-Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:20{10}]"Mrxsmb.sys ".-Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:24{12}]"mrxsmb10.sys ".A problem with the system audit reports:-on scname exitcode: 1068: LanmanWorkstationI have spent hours of troubleshooting and suspect I would need to replace the mrxsmb files but I'm not sure.I lived with the problem for months, but now he keeps me to install updates of Adobe software for Photoshop that requires the workstation service is running. I can't access an another XP workstation over the network.FYI: my mrxsmbxxx.sys files are all 23-02-2010.Windows updates are up-to-date, except one, the security update Windows Vista KB981852 which never succeeded to to install on my pc.Your suggestions are welcome.Thank you for your help.EricI finally found a solution to this problem.
I installed http://support.microsoft.com/kb/2272153/ .
I hope it's useful to others.
Eric -
Windows 7: error 5 (access denied) when you try to start the Volume Shadow Copy (VSS) service
System: Win 7 Ultimate x 64 on a HP Pavilion DV6. My account is the user account only suitable on the laptop and an administrator account.
When you try to do a system restore, it came with an error that the Volume Shadow Copy Service did not work, even if this error code is not relevant for the purposes of this question later, I managed to run the system restore in SafeMode to an old restore point...
When you try to turn on VSS, I checked services.msc (which I ran as administrator) and VSS was off and on the manual. I tried clicking on start, the following error message came:
"Windows didn't start the Volume shadow copy on the Local computer service."
Error 5: access is denied. »I then switched to automatic and tried again, same error. I tried since everything I can possibly think (including the definition of back and forth between manual & auto then trying the solutions below) to get the service starts, nothing helps. The solutions tried so far:
-net start vss high cmd - returns the same error (error 5 access is denied)
-high vssvc.exe cmd - same
-changed the full control permissions for me, the group admin and NETWORK SERVICE (that I had to add) to the System32 folder and vssvc.exe but no change
-changed the permissions to full control for myself, admin and NETWORK SERVICE group (who even once, I must add) for VSS in regedit (open as administrator) still nothing
-even tried to restart explorer.exe a high cmd and a task manager high and again made the permissions - still nothing.The only thing I haven't done is run a sfc scan, but tbh, I doubt that will fix anything. It also seems that VSS has been turned off for a while, as my last restore point was about 3 months ago and I installed things since.
Any suggestions/ideas would be appreciated, because I'm going nuts with that now! Thank you!
The Volume Shadow Copy Service must not be on auto-start.
According to the site TechNet Microsoft VSS THAT was introduced with Windows XP SP1 and since that time it has always installed as manual start since he does not need to be started automatically and it works day and night to do nothing. Some places say different times when VSS has been introduced, but be sure that it was a long time ago.
A popular site to see how Windows Services should / could be put in place is here:
http://www.blackviper.com/service-configurations/
If you've read about VSS on Microsoft TechNet, it says:
https://TechNet.Microsoft.com/en-us/library/hh125927 (v = ws.10) .aspx
So do you think the MS TechNet site is fake and that each installation of Windows since XP has a badly installed VSS Service? If that were the case all Windows systems in the world would be in trouble.
On an unafflicted system if you open the services applet and observe the VSS Service, it should look like this:
So if you start a backup operation or even create a Restore Point, go back to the Service applet and press F5 to refresh you'll see that the VSS Service changed its status to start:
Once the operation is complete the VSS Service will stop itself (it may take a while).
That's how it is supposed to work.
We should certainly be able to affect the automatic VSS Service and you should be able to start, but you shouldn't need to. People who say that "solved their problem" forgets to mention the days/weeks to try things that lead to get their system of work. There is no way of knowing which of the dozens of things that they could have tried really solved the problem.
You say that the system restore worked in Mode safe (but not a normal startup) and if it is true that means usually something to load in a normal trunk causing a problem and that something is usually an antivirus/antimalware application that is 'protect' your system against the changes. When you start mode safe these things are usually not loaded this is why sometimes your system restore mode without failure.
Contributors known for these programs are Norton, McAfee, Avast, Avira, Kaspersky and probably others.
So what antivirus/antimalware programs you are running and have checked their support pages for known problems with backup/restore system restore?
Norton has even a page about these issues:
https://support.Norton.com/SP/en/us/home/current/solutions/v51118464_EndUserProfile_en_us
Even McAfee told their product to uninstall completely before doing a system restore:
"Intel Security recommends that you remove McAfee security products before to proceed with an upgrade of the operating system or the Microsoft System Restore and then re-install your McAfee product when the update/restore is complete. "
So I assumed that whatever your AV program happens to be could be part of the issue here - but we don't know what it is.
We know error 5 is a permissions/access denied error type, but you shouldn't make adjustments to get VSS to start if something is wrong. If as you have tried adjustments have been necessary every Windows system in the world should also make these adjustments and coming is not past.
Of course, now, your system might be more affected since you've been changing permissions on the things trying to VSS to start when there is probably not a problem with VSS in the first place, so who knows what condition are in now.
You could start by uninstalling what your AV software (most manufacturers have a special program for that) and by eliminating third-party applications that are known to interfere. You can always reinstall them again later, no?
Maybe you are looking for
-
My Mac ran out of battery and now stands at Gray loading screen. Help, please
Any help would be appreciated. Thank you in advance.
-
Pavilion DM3-3112nr: IDT High Definition Audio is not turn off speaker when a headset is connected
I have a Pavilion DM3-3112nr update to Windows 10 64-bit edition. whenever I try to connect a headset, the sound plays on the headphones and speakers at the same time. I use the last dirver IDT on Driver download and HP software. I tried changing the
-
HP photosmart C4480: HP photosmart C4480 does not print colors
I had other questions on this matter. Changed to the new color cartridge. The printer will print a new alignment page that has the color on it, but all the images or type I try to print in color out just black and white. I don't have an option of bla
-
error code 646 for kb974771 kb972580, kb974554 kb973705
updates for microsoft outlook
-
CD or DVD not detected for the first time, always detected on insert it again.
Whenever I insert a CD or a DVD into my DVD drive, the drive is not detected. No contents of the drive is displayed in Windows Explorer. I see the drive to read the disc, as indicated by the green light flashing, but nothing happens. This problem is