Pavilion 550-154na: add additional USB3 ports at the 550-154na Pavilion
I need extra USB ports for external hard drives like all rear ports are now filled.
While that would be a hub powered plug-in I'd rather install a USB3 card using spare internal / available PCI Express x 1 & a SATA power Y splitter cable if I can. Are there any speed, power & the and/or other implications please?
USB3 ports are likely to run at full speed?
And internal 180W power enough for these additional requirements?
Thank you very much.
It worked very well. A USB 3.0 port Inateck 4 split easily in the spare PCI x 1 slot, powered by a splitter cable to 'Y '. Took about 3 minutes, which worked immediately, & big parade.
Tags: HP Desktops
Similar Questions
-
Ok. I have a handle on my site with the publishing refresh in the browser. Yet to learn though. The printable tutorial does not seem to explain how to add layouts replacing / screens. It has been my intention add additional provisions / screens once the basic site became operational. Can you help me?
Please specify a little more than if you are referring to versions available phone/tablet of the site you want to add to your site from Muse.
These links would be useful:
http://helpx.Adobe.com/Muse/tutorials/creating-mobile-layout-designs-Muse.html
TS http://TV.adobe.com/watch/Muse-Feature-Tour/Adobe-Muse-Designing-for-Smartphones-and-table.
https://www.YouTube.com/watch?v=_Bq1hViogS4
Thank you
Sanjit
-
Can I add additional USB ports?
We just bought a pack of PC HP Pavilion p7 1036b. There is simply not enough USB ports. Can we add additional ports?
Hello
Yes you can, you can buy a USB hub called device such as this. They are many around.
http://www.pccasegear.com/index.php?Main_Page=product_info&products_id=18565
(You can buy USB3 now for futuer usage)
Kind regards.
-
I would like to add additional management port with different user service
Hello
Version of the grid control is 10.2.0.1.0.
My company has now more than 100 target or with teams of Directors access to the WHO,
The original grid for us infrastructure is 1 WHO + 1 OMR. WHO answers very slowly recently.
Now we decide to add additional management service in another machine.
The user to operate the original SGD is different from WHO come, it will be a problem when you configure the new OMS?
The other issue is, we want to use different ports (11200) for the new OMS, it is practical, if OK, how?
Thank you very much.
The user to operate the original SGD is different from WHO come, it will be a problem when you configure the new OMS?
OK, you can choose any username, any username to install additional management service in another machine.
It has nothing to do with the configuration of the original WHO. They remain in the 2 totally different machine. SST and their, OC4J OracleAS Web Cache
operate independently.
The other issue is, we want to use different ports (11200) for the new OMS, it is practical, if OK, how?
Thank you very much.
It comes fully documented standard:
Oracle.sysman.top.OMS:s_staticPorts=/home/Oracle/MyPort.txt $ / Disk1/runInstaller
The content of /home/oracle/myport.txt may as follows:
Oracle = 11199 Server HTTP port
Oracle HTTP = 11200 server listening port
Oracle HTTP = 4443 Server SSL port
Listening port of the server (SSL) Oracle HTTP = 4445
Oracle HTTP Server Jserv 8007 = port
Server diagnosis Oracle HTTP = 7200 port
Oracle = 1830 Management Agent port
Application Server Control RMI = 1850 port
Notification Server Oracle application port = 6003
The Notification Server Local port Oracle = 6100
Notification Server Oracle 6200 = Remote port
Connect the port Loader = 44000
Cache of objects Java port = 7010
Port of DCM Java object Cache = 7101
Port control application server = 1810
Web Cache HTTP port listening = 11199
To listen Cache HTTP Web site (SSL) port = 4443
Cache Administration Web site port = 4000
Website of the Cache Invalidation port = 4001
Cache statistics port Web site = 4002
Oracle Net Listener = 1521
Management Service Upload (non - SSL) = 11199 Oracle port
Management Oracle Upload (SSL) Port = 11198
-
I have three hard drives in my XPS 9100 (start + two storage drives). I've been threatening to install an SSD , which would replace current among the hard disks. I have also two optical drives. Who uses all five SATA ports.
Ideally I would like to leave the HARD drive that is currently installed and reformat the drive for additional storage, but the issue of SATA ports and supply connections arise.
I could do this by installing a PCI-Express card like this:
StarTech.com 2 Port PCI Express controller card PEXSATA22I internal SATA II
and using a divider of power like so?
StarTech.com 6 SATA Power Y Splitter cable adapter - M/F in PYO2SATA
Note: I would connect the SSD to a SATA port on the motherboard (not map).
DG
Dg27,
They attract very little energy, so it shouldn't matter.
-
My question is, I want to use a: 2 ports USB 3.0 Flush Mount Expresscard 54 MM adapter card (one made by StarTech or similar) into the available Express54 slot that is currently empty. There is of course no reason to do this if the width of the Strip or BUS speed is not sufficient for USB3. I don't know what bandwidth is on the 9667ea of flag? If it's only 2.5 gb/s, then it will not be worth, but if it is 5 gb/s, then it might be interesting to do?
Would there be other problems by doing this update, such as driver problems?
As the Pavilion dv9667ea laptop computer was bought in 2008, so I suspect that the bus Express/54 is the ExpressCard Gen 1.0, which is the old standard. "StarTech.com" put this out in specification here.
This means that the flow will be 2.5 GB and not the 5.0 GB for the highest specification of the ExpressCard Gen 2.0 bus. It's a shame that a port USB3 is now not worth.
Thanks for your help.
-
I back up my files to an external hard drive. Rather than simply add changes or additions, it adds all the files each time, causing the hard drive fills up quickly. This problem was not always present; It began less than a year ago, so I wonder if it was caused by an update.
Hello
Method 1: the link below will help you to set or change automatic backup settings:
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings
Method 2: you can also check out the link below:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
I hope this helps!
-
Add card serial port of the Optiplex 780 desktop
I have a refurbished Dell Optiplex 780 compact desktop computer. I would like to add an inexpensive PCI card that has two serial ports RS-232 legacy. The description says that it is a "PCI to serial port card". He mentions "for 5V PCI slot only."
I think the 780 will take this card, but I'm not well versed on the specifics of the new PCI standards. This card will probably work?
Thank you
Jan
Typical PCI cards have one or two notches, according to voltage signalling. Cards requiring 3.3 volts have a notch 56,21 mm from the rear of the card; those requiring 5 volts have a notch 104,47 mm of the rear plate. Universal PCI cards have two notches to allow them to be plugged into two system 5 v or 3.3 volt slots.
According to the Manual, the 780 has PCI 2.3. PCI 2.3 supports 5 volt cards. Your slot machines are probably universal whereas they should accept a card with the notches or both. But be sure that
An important point is that the map you saw is low profile and full height. The manual said that 780 office accept "without editing card - up to two low profile cards. If you need to pay attention to the voltage more than just.
And the desktop version does not have a PCI-e x 1 slot, which means you need to find a PCI card.
Another alternative could be a USB > serial adapter cable.
-
HP Pavilion Dv6z - 6 c 00: Dv6z - 6 c 00 left side USB3 Ports does not
Hey!
I just replaced my HARD drive and did install a clean Windows 7 Home Premium 64-bit. Everything seems to work so far, with the exception of ports USB 3.0 on the left side. I went to different drivers on the site, but I can't seem to find something compatible and windows update can't find anything. Windows does not what either being connected to USB3 ports, but the right side ports are fully functional. Before the new installation, all the ports were fully functional on both sides. In my device manager there are 3 devices listed under 'other devices '. (With a little yellow "!") Icon next to them.) They are as follows:
-SM Bus controller
-Controller universal Serial Bus (USB)
-Controller universal Serial Bus (USB)
Of Hardwhere id for each:
-SM Bus controller
PCI\VEN_1022 & DEV_780B & SUBSYS_358D103C & REV_13
PCI\VEN_1022 & DEV_780B & SUBSYS_358D103C
PCI\VEN_1022 & DEV_780B & CC_0C0500
PCI\VEN_1022 & DEV_780B & CC_0C05-Universal Serial Bus (USB) Controller (this is the same for both)
PCI\VEN_1022 & DEV_7812 & SUBSYS_358D103C & REV_03
PCI\VEN_1022 & DEV_7812 & SUBSYS_358D103C
PCI\VEN_1022 & DEV_7812 & CC_0C0330
PCI\VEN_1022 & DEV_7812 & CC_0C03What can I do to restore the function of the ports on the left side?
Thank you for taking the time to read this!
Hello:
Normally install the AMD directly from AMD chipset drivers will take care of these problems.
Restart the PC after installing the drivers.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
-
WLC CISCO - VMWare and additional network ports
Hello world
Hardware wise, I managed a 8540 and a CISCO 5508 wireless lan controllers, so know around the GUI.
With the release of the VMWare Cisco WLC, it is ideal for a development and test lab environment. However anyone who has used will know it out of the box it does support 2 network cards (one for service and the other for management / data).
The question:
How to add additional network ports? In VMWare, it's easy, but how do you get the CISCO config to recognize? I have searched the forums and other areas, but can't seem to find someone who did this.
See you soon
Christian
Hello
Yes you are right, you can use only 2 network cards on VmWLC. never tried adding other network cards.
But what you want to do? Is to add a virtual interface on your WLC?
If so, you can configure your VmWare interface as a trunk and then create all your WLC virtual interface by defining the id vlan. Which makes sense for you?
Thank you
PS: Please don't forget to rate and score as correct answer if this answered your question.
-
Is it possible to add additional color labels?
Currently in Lightroom it seems only 5 color choices for the tagging of photos. I have group photos using color labels, but I often have more than 5 groups (eg. panoramas), and I find the star systems not suitable for this purpose. Is there a way to add additional color labels to the existing group?
Not really.
There are essentially five colors. BUT you can add different names for examples, see metadata > color label set > Edit... You might have a set for use with panoramas, one for the HDR, etc.. But a picture can have that ONE label at a time.
A MUCH more flexible and scalable system is to use keywords for the same info, like Photo > Panorama and Photo > HDR and Photo > support, etc. You will not see a color in the grid, but the list of keywords makes it easy to do what you want. Photos may contain a number of keywords, so you can have the two 'To Do' as a keyword and "print" or something else.
-
Is it possible/wise to add a USB3 card to the xw4600 workstation? Your opinion on this would be greatly appreciated.
Dianne
Amelia, welcome to the forum.
I think that it should be possible. Here is a page showing the PCI expansion slots in the workstation. You can check what slots are available. Then you can buy the appropriate card. For example, here is a PCI Express x 1 card of HP. She would lie on the #1 slot in the diagram. Of course, it should be available.
Please let us know if this solved your problem or not.
-
How to add additional buttons, the fields in the query Panel
I have a layout where I need to search for employees working under a Manager
I have a search criteria where I can choose coach in a menu drop-down so that the data of employees under him appears
Now I need to add a field more in search as assign to the manager who is a drop down
And I need add two buttons Reassign, Deassign the search criteria
So that when I select my manager current employees under him if poster and when I select the value of the entitlement and Manager dropdown in search criteria and click on the button to re-allocate employees are they assigned to this new manager... If I click on delete the key assignment those employees will get current Manager deassigned
And also once the results displayed in table I have to have a checkbox for each record where I can select the checkbox and reassign or deassing only employees
How to add additional buttons, fields for the Commission to request... I slipped and dropped my display criteria in the query with table PanelHello
a query Panel is for query and do not update documents. You can add buttons to the toolbar facet
See: http://download.oracle.com/docs/cd/E21764_01/apirefs.1111/e12419/tagdoc/af_query.html
but not the query itself on the ground
Frank
-
Backup drive is not detected by USB-3 ports before the computer
* Original title: 3 USB ports do not recognize the 3 TB drive; USB-2 ports do.
3 USB ports do not recognize the 3 TB drive; USB-2 ports do.
After working for about 1 year, my Seagate 3 TB backup drive is no longer recognized by the operating system.
The drive is connected to a USB port "SS" (i.e. USB3) port on the front of the computer.
During the boot UEFI confirms the existence of the impulse, but Win 7 (64) does not work.
When it is attached to a USB-2 port the drive works perfectly, but takes forever to my backup system.
I went through the procedure to connect to other ports 'SS', but the OS will still not
recognize the drive.
I would appreciate any advice.
-------------------------------------------------------------------------------------------------------------------
Operating system
Windows 7 Professional 64-bit SP1
CENTRAL PROCESSING UNIT
Intel Core i7 3930 K @ 3.20 GHz 37 ° c.
32nm Sandy Bridge-E technology
RAM
16.0 GB of DDR3 memory at 667 MHz (9-9-9-24)
Motherboard
ASUSTeK COMPUTER INC. P9X79 PRO (LGA2011) 26 ° C
Graphics
Standard monitor (1920x1080@60Hz)
4 095 MB NVIDIA GeForce GTX 680 (EVGA) 32 ° C
Storage
476GB ATA SSD Samsung 840 SCSI Disk Device (SSD) 27 ° C
465 GB ATA ST500DM002-1BD14 SCSI Disk Device (SATA) 29 ° C
465 GB Western Digital WDC WD50 00AZLX-00K4KA0 SCSI Disk Device (SATA) 29 ° C
2794GB Seagate Expansion peripheral Desk USB (USB (SATA)) 51 ° c.
Optical drives
HP DVD Writer 1260v SCSI CdRom Device
Audio
Realtek High Definition Audio
Hello PSManfred,
The probable cause of this problem could be due to some computer models have less power on USB port before then the rear USB port.
Please help me with the following information:
1. did you of recent changes made to your computer?
2. When you say USB 2 port, do you mean the rear USB port works fine but its slow?
3. what other device detects and works very well on the USB Port - 1?I suggest to follow the articles below and check if they help:USB port may stop working after you remove or insert a USB device:
http://support.Microsoft.com/kb/817900/en-usMy drive does not appear in Windows Explorer
Drive not detected - helpful linksHope this information helps.
Please answer with the information needed to get help.
-
I have a laptop Macbook Pro with processor 2.2 Ghz, HDD 256 GB, 16 GB of memory, operating system El Capitan. I want to add up to three additional 3 USB ports with an adapter. Here are all excellent adapters available on the market to achieve this goal? If so, what are they, and they are available to plug in the USB ports and / or Thunberbolt on my laptop?
I purcahsed an adapter but it only matches a port of type C, which is not on my new laptop.
Thanks,-John D.
What month / year is your Macbook Pro?
Also is what size?
i.e. of Macbook Pro (13 "Early 2011)
If you need a crush on USB3, see this OWC. http://eShop.MacSales.com/shop/Thunderbolt/dock/OWC/Thunderbolt2-dock/?_ga=1.216 256982.1355932382.1452374654
If your existing computer has USB3 ports, you could get a USB3 hub.
Kim
Maybe you are looking for
-
AT200 ICS (ice cream sandwich) 4.0 upgrade
Hello No information on upgrading AT200 to ICS, anyone? Greetings from Munich
-
Can't use card Atheros WLAN on my Satellite A100-784
I have install the Atheros WiFi driver for the Toshiba drivers folder and I get a message saying "the device is not present or could have been ejected/disconnected from the system - insert or reinsert now." The wireless switch is turned on while it w
-
IM connected to a Linksys AM300 Modem and within hours it will drop the connection and get ip address of 169.254.193.178 -J' have flashed and reflashed the modem with the latest firmware, I have reset and reconfigured it 5 times more. -It is not conn
-
"all my .exe files will open with ie" my bad gestures "and I can't restore default settings
What iam I missing besides a brain?
-
Original title: Wireless LAN vs I work from home and I have to hard wire from my computer in the network. I've known sessions hung several times during my shift. I've done a tracert and find RTO on several sections (4-5-7-8) using the address of netw