How to make two mono audio tracks in a stereo pair?

Similar Questions

• How can I change the audio track on netflix

  I have the new Apple tv 4. How can I change the audio track on netflix?

  Setup of the Apple tv has been replaced by the language I want but Netflix ignores this.

  Thanks in advance

  If the film has a choice of audio tracks, you should be able to slide down while the film is presented, then select audio in menus that appear.

• How do I cut an audio track without deleting.

  How do I cut an audio track without deleting?

  Probably the best way to do this is by checking Mute in the Audio Mixer Panel for this track. You access panel mixer Audio through the Tools tab in the toolbar before 11 or window > Audio Mixer to pay earlier.

  Good luck

  Hunt

  PS - It would be great to be able to disable an entire meadow, as track in PrPro. You CAN Disable Clips, but a full track deactivation would be easy. I filed requests for features for this feature, but so far, no go.

• How to put two mono tracks in the usual stereo display in the edition of Audition 3 mode?

  Hi guys,.

  Previously, I had no problem simply using Adobe Audition 3 for simple recording and editing of a stereo stereo power not from mixer... well almost no problem... :-)

  Today, I'm having a bad day, or maybe it's because I'm used to be retired... :-)...

  Query: How can I put two mono tracks in the usual stereo display in Edit so they both display correctly there?

  • Put simply, I have two mono wav files. Let's call them Left_wav and Right_wav.
  • I can't seem to get imported into a new clean Edit (Normal stereo track route) view that Left_wav is half top and Right_wav is on the bottom half.
  • Whenever I try, I just get either Left_wav or Right_wav taking up the whole of the edit view. that is, it shows just a track.

  Anyone who is familiar with hearing 3 help kindly can? I'd appreciate a simple step-by-step... I can't see where I'm going wrong, and it's driving me bananas :-).

  Thank you

  There are different ways to do the Audition 3. Here is one.

  Open two mono files separately in the edit mode. Then convert Left_wav in stereo by going to the types of samples to change/convert then under stereo channels with Mix of 100% left and right 0% mixture. This will give you a new stereo file with Left_wav on the top channel. Then go to the Right_wav and copy it to the Clipboard using edit/copy. Return to your new stereo file and activate right channel change only in the right channel Edit Channel/edit/change. Then make sure that the cursor is at the beginning of the stereo file and paste Right_wav into the channel at the bottom of the new stereo file. Finally, save as.

• How to save on multiple audio tracks?

  I'm going by Apple Logic help to try and learn how to use it.  I am currently in the recording section, learn how to record on multiple tracks at once.  Here's what helps:

  Save on multiple audio tracks at once

  1. Do one of the following:
     • Choose file > Audio recordings overlap > Cycle Mode on > create titles and silent.
     • Choose file > Project Settings > save, then choose the Cycle > create titles and Mute from the pop-up menu, overlapping Audio recordings.
     • CTRL-click on the Record button in the control bar, choose Save settings from the context menu, and then choose Cycle > create titles and Mute from the pop-up menu, overlapping Audio recordings.
  2. Set the input source instrument or microphone for each track you want to record.
  3. Click on the button Activate in the track header of each track you want to record.
  4. Move the playhead to the point in the rule where you want to begin recording.
  5. Logic Pro includes a metronome, which plays a steady beat to help you play in time while recording. You can disable this active or disabled using the metronome button in the control bar.
  6. Click the Count button in the control bar so that the metronome play a preset count-in before the start of the recording. Note: For initial configuration, choose registration > plug-in software component count, and select a measure.
  7. Click on the record button in the bar control (or press R) to start recording.
  8. Start to sing or play your instrument. A new audio region appears on each of the active record tracks.
  9. Click on the Stop button in the bar control (or press the space bar) to stop recording.

  I did, but it does not work.  I created two tracks.  I go to a track and click the button Save, then go the other way and click on save, but when I click on the button Save on the Panel at the top, it records only to the last track, I selected the folder it does not save to the other channel.  It seems that as soon as I go to another track and arm to save, it disables the recording on the previous track.  Apparently, help left something in the process.  If anyone can solve this?

  Hello

  You must assign different entries for each track:

  Input 1 > track 1

  Input 2 > track 2 etc.

  

  TDC

• In the first 11 elements, can I convert a stereo, one mono audio track?

  The microphone that I use on my digital SLR when video recording is a mono microphone (Canon 5 d MkII dslr, Hama lapel MIC). When I import video in first items 11, audio playback in mono - is there a way I can convert the audio in stereo?

  Thank you.

  Tom

  Welcome to the forum.

  In fact, you cannot convert a mono source in true stereo, because it requires two microphones., but you can convert it to 2 mono channels. The difference is that you have the same signal on both channels, unlike stereo ture, where signals differ according to the micro system.

  According to Steve, you can fill out to the left, or fill right, or you can just drag another Instance of your Audio Clip to a different Audio track mono. In the Audio Mixer Panel, you can pan to the left and one right.

  Also, just like pre your mono 2 channels output mix, it will give you 2-Channel Audio signal even in the two ways, if you let the Pan toward the Center.

  Good luck

  Hunt

• Duplicate and synchronize a mono audio track?

  I went just from FCP7 to body of CS5.5.

  When I was at the FCC, I used to do an OPTION/SHIFT on my Mac key board and drag audio mono for the next down

  and it would overlap with the audio track.

  Then I have should highlight both and synchronize them together so if I moved the volume or have you keyframing on a track, it would be

  relate to other audio track.

  Is there any way to quickly do the same in the BODY?

  In accordance with my 1st question, I mentioned that I was new to the ORGANIZATION and that he just had a revelation to the Commission of the mixer. Very cool, how you can transform each mono track to the left and right speakers.

  So I don't have to do what we used to do at the FCC.

• How to make a loop audio Clip?

  PrE7.

  How to make an audio clip loop a given time period?

  Let me know if you need, more or less long. I always your original, so the version published on the system. Do not delete for a few days. We can also adapt a modified version to get an exact duration, by basically Time stretch the Clip. I'm doing this at the hearing, so I can maintain the field and other aspects of the case. Pre can do, to a certain extent, but I like the control of the hearing. In addition, we can Volume keyframe fade sooner than the last Audio Unit, if they had to.

  Good luck

  Hunt

  PS - If you use SFX, I often more material, I'm going to need. Rather than change in Audition, I just put all the Clip of SFX on a track and keyframe and the Keyframe to just the place that I need. In this way, if, let's say I lengthen my video Clip later, I just need to set keyframes for SFX and I still have enough material to use - I have no re - edit in Audition.

• Making a mono audio track?

  Is it possible to do everything on a specific audio track to be mono?  I have music that is stereo Audio track 2 and dialogue (which is stereo, but I need it to be mono) on audio track 1.  Without having to go to each audio file and open it with another program and making mono, I can just choose mono some how a whole piece?  Thank you very much.

  Yes, mapping to a Mono submix track would do exactly that.

  Good luck

  Hunt

• How to make two of my red columns please

  I would like to know how to make my column savings on my red page please so it stands out.

  www.bristolequestrianservices.co.uk/TestPage.html

  Thanks for expectations.

  karenserjy1 wrote:

  Red text

  
  

  {TD:nth-Child(3)}

  color: Red;

  }

  
  

• How to export a MXF with 4 audio tracks. Original stereo 1 and 2 and the other stereo language 3 and 4?

  Hello

  So my question is in my title.

  I provide a MXF for a local television station. They ask me to create a MXF with audio 4 channels - 23LUFS.

  First, I create my sequence, I put 2 Adaptive audio track with my audio file. But when the first to export, it blends all my audio track and then give me a MXF with busy channel 1/2 and 3/4 empty.

  I need help :-)

  I am grateful for!

  so not an audio export 4 channels would require a sequence adaptive audio 4 channel?

• How to make two text colors

  Hello

  I use photoshop demo, and I have problems to make two color of text. I have windows 7. I tried to do a right-click on the teaxt layer, but I can't do anything

  One way is to use a Gradient Overlay layer style

  more information:

  http://PSD.tutsplus.com/articles/tools/gradient-overlay-layer-styles/

  http://www.BigStockPhoto.com/blog/working-inside-the-gradient-editor/

  http://help.Adobe.com/en_US/Photoshop/CS/using/WSfd1234e1c4b69f30ea53e41001031ab64-77e1a.h tml

  

• How to export 4 mono audio channel tracks separated?

  Hello! I need help as soon as possible...

  I am trying to export video files that have 4 separate mono (single) audio channels.

  I work with red RAW images, and I've synced sound that has four mono channels to separate. A boom, two lavaliers and zoom mic.

  Here is my solution up to now...

  When you create a new sequence I selects RED R3D 1080 p, then I click on TRACKS > Audio and select multichannel, number of channels - 4. Can I go ahead and synchronize the video and audio. When I go to export I'll AUDIO and select "Uncompressed" audio codec, and in configuring audio I select Mono - 4 channels.

  However, after export, I believe that the four channels are identical. I need channels to be separated, as the source (boom, LAV, zoom, etc.).

  Please advise on how to do it. I'm doing something wrong?

  Thank you!

  A couple of things to watch, make sure that the timeline tracks are top selected outputs correct and are correctly pans.

  

  Some export codecs will allow mono files separated, some don't. This gives you the opportunity:

  

• HOW TO GET TWO WAY AUDIO BETWEEN A PC AND A PROFILE C90 SYSTEM

  I'm trying to connect my PC to two audio channels and take advance of the C90 65 "profile that I have.

  I had the C90 RCA Audio Line In #2 to taking SPKR of the PC and work well to get audio to the profile via the C90 speakers.

  Audio of any of the room of the Microphones connected to the C90 to the PC?

  I have a cable connecting the Audio Line Out #2 (right) goes to the MIC on the PC socket, but it does not work.  I don't see any audio signal on the map of his local record settings?

  I did successfully on other systems using a series MXP codec that is 3000, 6000 using catch RCA of VCS.

  Also, what are the internal settings to ensure that turned off inside the C90 and the sound card on the PC?

  I'm missing something simple, I'm sure.

  Any help and or the drawing will be appreciated. ???

  You would use TC Console to manipulate the audio routing in the codec.  However, I recommend a microphone routing to an output of speaker, as Wayne mentions that this may cause problems with the audio.  I routed the microphone input to the HDMI output once, and it makes the sound being transmitted to the dark side be distorted, don't know why, but I would test fully all possible scenarios when changing channels audio.

• How can I delay the audio track by half a second

  I am changing a clip video source footage of the layer that has the music on the audio 1 track, linked to the video 1 track. The music starts a fraction too soon and so I want to delay the start very slightly. Is there a way to do this. Thank you

  Mike

  Hi Mike,.

  Yes:

  (1) make sure that you are editing, not in mode mode sceneline

  (2) right click on the item in the timeline, and then select 'Delete Audio and video connections '.

  (3) you can now drag video and audio independently on the timeline.  To move half a second, you will need to zoom in a lot to move that small of an amount.

  (4), of course, have "silent" for 1/2 second at the beginning of the clip however!

  Hope that helps!

  Bob