Pavilion a6600f desktop PC

Similar Questions

• HP Pavilion a6600f desktop PC communicates only with the monitor

  Our bureau a6600f HP Pavilion PC (with OS 64 - bit Windows Vista) has stopped communicating with his monitor.

  The start process seems to work for 7-8 seconds before stopping.  We can hear the fans and CD unit turn during this period.  There is no warning beeps.

  We went from monitors to exclude a monitor problem. Both have two monitors, that we have given to the case put off until the boot process - which may indicate no comments received.

  We tried to reset the BIOS blindly in accordance with the instructions provided for elsewhere in this forum.  We also tried to boot from a CD without success.  Please notify.

  Once the boot sequence was not even initializing, I realized, I discovered the solution.  A simple search online for 'black screen' and 'no boot' leads to results multiple problems related to the integrated NVIDIA gpu chip.

  The chip is apparently subject to overheating to the point where its connective solder may melt and break its link with the motherboard.  This issue mainly comes in laptops because of the sealed enclosure, but it has been reported also occur in models of office such as ours.

  This broken link results in a black screen and an inability to boot into the BIOS.  Several of these instances have been diagnosed wrongly that the motherboards 'failed '.  Fortunately, there's a fix called "reinvest."   It comes down to warm up the chip gpu to the point where his welding redéroule reconnect the loose pins.

  Some repair shops are fully aware of this problem and offer to repair it for about $80 at present.  Some DIY Laptop owners have also posted videos online in order to document how they have reorganized their own chips using a variety of means.

  I decided to take the road of this last, warm our chip NVIDIA gpu with a heat gun using a heat shield to protect surrounding components of the motherboard.  My attempt to reflow works perfectly, so I handed in thermal sinks the gpu with some thermal paste expenses place to finish the job.

  To summarize the question, our desktop HP Pavilion a6600f PC lost communication with his chip gpu NVIDIA Geforce 7100 integrated due to the chip overheat and melt its connective solder.  This broken link compromised the ability of the motherboard to initialize its startup sequence, which gives no output to the screen, resulting in a screen empty.  A new graphics card does not resolve the issue, given that the motherboard was inoperative because of the connective issue with the gpu chip built-in.  Reinvest the gpu chip has solved the problem.

  PROBLEM SOLVED!

• How to install a 2nd hard drive for HP Pavilion a6600f desktop

  I want to add a 2nd internal hard drive, I recently installed a SSD drive as primary drive and installed Windows 7 Enterprise. Now, I want to take the original hard drive and make a 2nd disc. I did once before, but cannot understand the connections.
  
  Windows 7 Enterprise SP1, installed to clean
  HP, model a6600f
  Processor Intel Pentium Dual CPU E220 @ 2.2Ghz
  4.0 GM RAM

  I can't understand the connections...

  Here's the original HD I want to be the 2nd drive internal

  

  Here's the orig connected HD

  

  This is connectors - but they won't connect to the HD...

  

  Hello

  Please see the manual (page #19) following:

  http://h10032.www1.HP.com/CTG/manual/c00841410.PDF

  Kind regards

• A new graphics card for HP Pavilion a6057c desktop PC

  Hello
  I was wondering if I can get recommendations for a game for my HP Pavilion a6057c desktop PC graphics card.

  Hello

  A video card decent for the games will require a bigger power supply in your PC.  Go with a level of high level video wouldn't do justice to your PC based on its current level of performance of the components.

  TheCorsair CX 500is on sale for $45 after rebate.

  This GTX 460 768 MBis on sale for $95 after rebate.  This GTX 550 TI 1 GB$129 after rebate.  The adjacent slot on the slot PCI-E x 16 in your PC must be vacant.  Review thePresentation of the motherboardof your PC.  Are both video cards NVIDIA 8.25 "long so do some measurement inside your PC to be sure that the video card will fit.

  Review the specifications of performance ATI and NVIDIA . Look at the specifications of strip memory bandwidth and level of DirectX support.

  How to replace a power supply.

  How to replace a video card.

  Shop around and know what the return policy is before you buy.

• How faster (HP Pavilion a6130a desktop PC).

  Hi all

  I got (HP Pavilion a6130a desktop PC) and please advise me on the ways to upgrade from my office to speed up.

  Here is the link for my product...

  http://support.HP.com/us-en/document/c01109618

  Thanks to all who could help me with this problem. I highly appreciated.

  Thanks for your help Big_Dave.

  I'll look into the PC that you recommend...

• The HP Pavilion p6110y Desktop PC OpenGl 3.0 is compatible?

  I recently downloaded a game on Steam (Kings mercenary) because according to this site (link below), he said that I was able to run it.

  http://www.systemrequirementslab.com/CYRI

  However, when I went to play the game, it is said - and I quote - "your video card's OpenGL is does not support the extension GL_ARB_framebuffer_object.» Please update your driver or contact your provider for loans OpenGL 3.0 drivers. »

  If my PC is have OpenGL 3.0 drivers available for download, or will I just lose $15 on a game that I will not be able to play?

  My PC model is the HP Pavilion p6110y desktop PC

  Hello

  Based on the following link, your machine has ONLY "Intel GMA 3100":

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c01742156 & lang = to & CC = US & TaskID = 101 & ContentType = SupportFAQ & prodSeriesId = 3942799

  And according to the following document, the card only supports 2.0:

  http://download.Intel.com/products/graphics/intel_graphics_guide.PDF

  Your machine has a slot for a video card, you can add a new card with a correctly PSU, so you won't lose $ 15.

  Kind regards.

• Can I install a Philips DVD R/RW drive (DVD8801/96; 9305 046 68096) on my HP Pavilion p6720f desktop computer

  I have windows 7, AMD Phenom he's 840t Quad Core with a dvd burner as the top super multi drive on my HP Pavilion p6720f desktop computer. Can I install a Philips DVD R/RW drive (DVD8801/96; 68096 046 9305) as my second drive burner?

  jherbie77,

  Are you sure of that model #?  I found it listed hereandhere as a PATA/IDE hard drive. Not a good choice!

  That being said, here are my suggestions.

  You need an internal Sata DVD + RW (there be DL mode) and the necessary cabling. Power supply not having a spare power cord Sata, but it wil have the molex 4 pin. You also need a Sata data cable.

  Player $18.99

  cable selection:

  just a data cable, you have found a power cord Sata 15 pin $2.99

  just a power and data in the drop-down list $3.99

• No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home

  No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home. Any suggestions on how to solve the problem?

  Thank you. This site help me solve my problem.

  http://www.Realtek.com.tw/downloads/ExpressFTPSite.aspx?DownTypeID=3 & DownID = 558 & PFid = 23 & Conn = 3

• HP Pavilion p6 desktop PC - 2220t

  Hi, I'm looking forward to the purchase of HP Pavilion p6 desktop PC - 2220t and the only thing I need now is to know the motherboard. I only know the chipest, but I also need to know the plug and all the other stuff like this.

  Tyler,

  Taking ECP supports the Socket type: LGA 1155, TDP: 35W up to 95W (CPU load).

  It can be found here:http://support.hp.com/us-en/document/c03329092

• Noisy fan (HP Pavilion A1629UK1 Desktop)

  I have a HP Pavilion A1629UK1 desktop computer. When I load windows the cpu is quiet until I open programs, then the (loud) fan turns on and does not turn off. Suggestions for me what to do - should I replace the fan and what should replace it with, and how do I do? Thank you Maxence.

  Open the computer case and clean any dust that could build up inside the case and the heatsink / fan assembled. Please post here again, if this help does not solve your problem.

• Upgrade processor for Hp Pavilion p6607c desktop PC

  Hello. I have a desktop Hp Pavilion p6607c with an amd athlon ii x 2 220 processor atm and a corsair 500w PSU. I was wondering if I could switch to an amd phenom ii x 4 processor that stretches with problems or if there are all the other better processors that I could update. Only change that iv made about it is that iv added a Radeon HD 5670. Thanks in advance for any help.

  ERICO,

  This is clearly incorrect, as the original AMD Athlon™ II X 2 220 CPU in the computer of the OP is listed by AMD as an AM3 CPU. This is also confirmed by the fact that HP record page for the HP Pavilion p6607c desktop computer reads;

  AMD Athlon II X 2 220

  Speed: up to 2.8 GHz

  Number of cores: 2

  Socket: AM3

  Bus speed: 4000 MHz HT3

  Based on this information and the fact that HP list updates for this computer include the AMD Phenom II Quad-Core and AMD Phenom II Triple-Core CPU, which both seem to be AM3 processors, I'd feel safe recommending the installation of a large number of these 95 watt AMD AM3 "C2" not to not UC and 95 watt AMD AM3 'C3' not to not UC.

  Please send Bravo

• Pavilion P6610f Desktop Tower a ticking noise, can turn back be opened while still running?

  HP Pavilion p6610f desktop win 8 64 bit since my hard drive has failed and a friend of a friend installed another hard drive and insisted on the fact that I install Win 8 instead of 7, (I hate Win 8), there is a click inside the tower and I also hear something that seems to hold the bike to the top then then down every few seconds, the ticking is almost every second. I checked the power that I knew how. Configuration and System Device Manager and it says disk hard does not work properly and is no need for an updated driver. But everything is so slow and things don't work a lot of the time, the internet will not load or merely far sometimes but convenience store network says it is connected and functional. I sometimes can't features to not work the control panel.  I tried the diagnosis of memory in the administration settings, but it wouldn't work. Before I could get my Win 7 backup files on Win 8, PC showed that I had 220 GB of 232 GB memory left possible on the replacement hard drive. I have 4 GB of Ram on a 16 possible and I thought shoud get more. I was just wondering can I have the back off the coast of the Tower during its execution so that I can see that actually the sounds before investing in another hard drive and memory cards? I'm so unhappy with my computer that I love even more to use it and I used to stay on 10 to 16 hours a day.  I don't have microsoft nhave word more and I miss the fonts that he used and for a reason that these fonts are missing off the coast of my e-mail program when they were there before the failure and the loss of MS Word IE fonts. Sorry so long winded. Taylor

  Taylor,

  No long-term, just percise. Liked it.

  (1) you can observe with the box to open, but get a grounding strap. (for example).

  (2) If you want to WIN 7 64 bit, see here

  (3) memory is available here (2 PCs 4 GB)

  (4) MS Office Starter 2010 is still free.

• Adding features USB 3.0 for a HP Pavilion p6235uk desktop pc

  Hello world. I have a HP pavilion p6235 desktop PC uk. The OS is Windows 7 Home Premium.

  These are the MS-7613 (indio) anMS1 motherboard with a PC1 expressx 16 slot for graphics card, three PC1 express x 1 slots and location minicards.

  I don't know if the PC1 express x 1 slots are empty. This pc model has only USB 2.0 ports, but I would buy a USB 3.0 external hard drive to store an image of the computer system and regularly back up the existing files.

  I know that due to backwards compatibility I can plug USB 3.0 drive into a USB 2.0 on the PC. But then I get the speed available with USB 3.0.

  For that I need to install the hardware on the PC. I know that this will include a 3.0 PC1 USB expansion card, I think it is called. But it may be that I will need other elements, except that I don't know what they are.

  It depends on the PC, but this is as far as I know. I read that sometimes what we call a Molex plug is necessary, but now I've really exhausted my store of knowledge.

  Can someone help me? Thank you very much.

  Laurencewithau

  Hi laurencewithau,

  Right, you can use any of four unused pins connector. Or, if you have no connector four unused pins available, you can buy a splitter. Unplug the connector to four used pins and place the splitter on the connector. You will now be able to set a single branch of the four-pin connector to its original location and have an extra unused connector available to power the USB card.

  Molex:

  

  Molex Splitter:

  

  Jaco

• HP Pavilion p6520y desktop PC: need help to upgrade my ram

  I have a HP Pavilion p6520y Desktop PC model #: WW636AA with a FOXCONN 2 92 motherboard, AMD 785 G Chipset. I'm currently upgrading my ram of the current 6gbs maximally whatever my computer supports. My motherboard says it supports up to 16gbs (since I am running Windows 7 64 - bit), and I'm trying to figure out what I should update.  I scanned my pc on Crucial and they gave me a bunch of suggestions, but I still don't know what I should buy.

  Analysis of the computer on the essentials: http://www.crucial.com/usa/en/scanview/65CC1E0131D926C3

  HP computer specifications: http://support.hp.com/us-en/document/c02179806

  Card mother: http://www.findlaptopdriver.com/foxconn-2a92-mainboard-specs-742010h517p/

  Is it smart to upgrade to the maximum ram and what type of memory should I update? In addition, my computer can even support 16gbs of ram? I have receieved conflicting information about it and I need to check the info I got is correct. I will include a picture of my computer listing of Speccy.

  There are a few suggestions on crucial, such as the Crucial Ballistix Sport 8 GB Kit (4GBx2) DDR3-1600 UDIMM LP or the Crucial Ballistix Sport 8 GB Kit UDIMM DDR3-1600 (4GBx2) or 8 GB Crucial Kit UDIMM DDR3-1600 (4GBx2) and so on. (I don't know if you can see the recommended memory when you view my scan. I guess you can, but might as well include some of them that I'm interested in.)

  Here are the specs of the computer of Speccy:

  

  

  

  Thanks for the help in advance!

  The funny thing is, I was about to buy this one right before I posted this, but I just wanted to see what others thought and if I'm right that my pc supports this amount of RAM. Thanks for the suggestion and response

• Where can I find of the bios chip on the motherboard of my Pavilion a6010e desktop computer and it is soldered?

  Where is the bios chip on the motherboard of my hp pavilion ab010e desktop computer and it is soldered?

  It is welded.