Pavilion ab063cl: "Please wait"... a lot of time

Similar Questions

• Help urgently needed! -User profile takes a long time to load and the rest of the screen with the message "Please wait loading profile service user.

  Hello

  Every time that connect us to servers of TS farm, the profile of the user load for a long time and she stays with a message "Please wait for the user profile service" for longer than 5-6 minutes. We work in two areas which is configured as "an endorsement of forest transitive way." The domain (domain A) with TS farms hence connect us a cross forest profile disabled so we cannot load the roaming profile in this area, whereas another domain (domain B) roaming profile user's roaming profile.

  Also in the directory the Active directory of the domain B, TS/RDS settings is enabled for the problematic profile.

  TS / RDS--> roaming profile path and TS home folder is configured. TS/RDS settings is configured because we use other farms of machines/TS citrix other than the one in which there is problem.

  When disable us TS/RDS of the directory settings active directory domain B, then it is extracted to improvement in time. But we're in a situation were we cannot disable TS/RDS settings as we use other Citrix machines also. So we tried configuration GPO in A TS domain as

  Which allows to "allow only the local user profile".

  Allowing 'profiles itinerant Prevent password propagation to the server.

  This allows to "Allow asynchronous user group policy processing when you connect via Terminal Server Services"

  But still, there is no improvement in the time taken by the server to connect. What is the adjustment to make in the field of A TS, such that he will not try to charge the roaming of the B domain user profile, even if TS/RDS settings for the user profile are configured?

  Forums of evil: you want to Technet forums.  It's more domestic consumption...

  https://social.technet.Microsoft.com/forums/

• Pavilion x 2 stuck on Please wait

  Hi a friend asked me to look there for laptop computer, when you start it it shows the HP symbol then moves a blue screen and then the wait please rises, I guess that's where windows is supposed to load but its there just with points going in circles, I've never used windows 8 or one of these things , so I'm a little out of my depth, I tried to reset the bios back to default values and I run a diognostics check and it came to pass that no problem so I guess it must be a software, its been like this since just after she bought. Why she did not return it so I don't know all I know, is that she tried to put the itunes on it, but he said there was not enough memory space or that she could not remember who he was as it was some time ago.

  Any help with this would be welcome

  Hello ramasesuk, welcome to the Forums of HP.

  I see that you are working on your laptop the friends, that it does not load in Windows properly, you get to a 'please wait screen. I will try to help you with this.

  At the start, have you tried to enter Safe Mode? If so, could you. If this isn't the case, I suggest to start with this.

  If you can get in Mode without failure, you can try a Refresh in Windows 8.

  If you can't mode without failure, it may indicate a bad image of the operating system. For this, you will need perform a system recovery. If your friend isn't a recovery media, she may need to contact the support for this.

  This document will guide you through the recovery process: view together to recover the operating system or reinstall the operating system. Read everything and use sub documents it leads you too.

  In case you need to contact support, the information here:
  Technical support of HP, 1-800-474-6836 in North America. For all other regions, please click here.
  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html
  Please let me know how it goes.
  Thanks for posting on the HP Forums.

• Please wait while Windows configures your computer every time at startup

  Hi guys,.

  I was recently infected by a virus, it has been removed and it corrupted the registry beyond repair, I backed up my files and re-installed my Windows Vista Ultimate 32 - bit edition, everything is all back and work, with the exception of this little problem...

  Whenever I start my count, after the green bar loading screen, it is a black screen saying

  "Please wait while Windows configures your computer...". »

  It takes about 5 minutes, then continues to the desktop very well, it's just that I prefer there not to go to the black screen and take 5 minutes every time I start up.  I have installed all updates, including Service Pack 2 and still no joy. Anyone know what is this problem and how to fix it?

  Thank you

  Chris

  Hi temple3188,.

  Try the troubleshooting steps in this thread, described by Michael, to solve your problem.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I change the font and size of legends? The manual says it's possible, but I lose a lot of time trying to find the way. Help please.

  The manual says it's possible, but I lose a lot of time trying to find the way. Help please.

  I think that the subtitle Editor is not very well developed, since I adapt the text, the timming, but then, text does not fit, or letters are very separated... and I can't work out these details.

  Thank you

  I don't think that you can change the size of the police with captions. I think that because it is a 'standard' you are limited to what this standard supports only. If the manual says: you can change the font size then it probably still says: you can change the fonts familty. I was never able to change the size of police or the family. The manual should be rewritten to prevent people to mislead him.

• HP 15 Notebook PC L3Q92EA #ABU: HP Pavilion, 8.1 Win "Please wait" when the unlock screen saver

  Just bought an HP 15 Win8.1 running laptop.  I think it's a huge pain to use.  Once the screen lock is committed, it takes forever to get the login screen to appear.

  I move the mouse or press a key to get the screen to go back, but I see is the screen "Please wait" for more than a minute then a background appears.  Click the mouse and I have one more minute of "Please wait" before the logon screen appears.

  Can anyone help, until the laptop goes through the window?

  Hello

  Thanks for posting your concern on the Forums for Support and sorry about the problem you are having. I went through your post and it sounds like I should be able to help with the problem.

  I suggest you perform the test (Test of the HARD disk) on the computer. Follow the steps below-

  • Switch off the appliance.
  • To turn back press the power button and as soon as you release, keep pressing the "ESC" key, unless a screen comes up, you might want to wait a minute while tapping the button.
  • In the start menu, choose F2 - System Diagnostics.
  • HDD test would be under the Test component. (usually, it is recommended to test rapid and wide, but for now because the PC is new I rather suggest you simply run the Quick Test).
  • After you choose the Quick Test, click on run once.

  If he succeeds, you can proceed with the recovery, part if she fails to give a call to tech support at the number mentioned below, since the unit is under warranty, you should be able to get help to get the drive replaced.

  On the recovery procedure, its complete restoration of unit settings factory which means that the data on the computer is cleared and with it, the software that can be installed on it. Please follow the steps below to perform recovery-

  • Switch off the appliance.
  • To turn back press the power button and as soon as you release, keep pressing the "ESC" key, unless a screen comes up, you might want to wait a minute while tapping the button.
  • In the start menu, choose F11 - system recovery.
  • On the next page of options, you can choose - "troubleshooting." (If it is a unit of windows 8, or you can skip this step)
  • On the next page, you will need to choose "Recovery Manager". (If it is a unit of windows 8, or you can skip this step)
  • On the next page in the first column, under "I need help immediately", you must choose "Reduced Image Recovery"
    • Now, here, you can get an option to backup your files, because it would be an option to say - recover after saving files or recover without backup of data.
    • You will need to insert the disc followed the screen - instructions here on and unit should be returned to its original state.

  Now if you need help email us back or call HP SUPPORT @ 1-800-474-6836 [24/7 SUPPORT].

  Although I work for HP, but I am personally.

  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution. Click on the 'Bravo Thumbs Up' on the left to say 'Thank you' for helping!

  Concerning

  Aks3621

• BlackBerry Z10 Z10 "Please wait while your device is the software update and restart"

  Sorry if this question has been asked elsewhere but I searched and could not find an answer the applies to my particular situation.

  I have a Z10 on Bell who got an automatic update this morning (I have no note of my operating system version number or the version that I was updating to) and the phone is locked to the prompt "Please wait while your device is the software update and restart."  Update messages said it would take a lot of time and that I should connect my phone if it was less than 20% of battery.

  The Bell's Web site indicates that the version of the software is 10.3.2.2168 and the latest version of the OS is 10.3.2.2252.  I don't know how many times this site is updated, but I guess that's the version that I am trying to update?

  (http://support.bell.ca/Mobility/Smartphones_and_mobile_internet/Operating-Systems?alias=BlackBerry-Z...)

  The phone is not fixed... I can see messages turn on the lock screen and interact with the phone to get a glimpse of these messages, but if I try to unlock the phone, the message block appears above any function, I tried to launch (whether a text message, the camera, an email, etc) and I can't interact with the phone at that time otherwise than to lock again and open the lock screen up.

  At the time wherever I drag, the prompt.

  The prompt on the phone for about 6 hours now.  The battery was full this morning and had exhausted 70%, but I've since plugged.

  I have not tried a batt pull because I'm afraid of the consequences of this action after the launch of the update.

  Everyone knows this and had the phoen back? I know that 6 hours is well past any reasonable wait times in my books and was strongly tempted to restart the device... but is there here experts who recommended that I continue to wait?

  I forgot to mention that the power button was still working to give the ability to power off the unit.

  In the end, I couldn't wait any longer.  I put off the device "no risk" with the power button, rather than using the battery pull method.  I turned on the camera back later and the blackberry logo appeared.  The screen faded faded black and no lights appeared on the phone.

  I could hit to swipe down to get the blackberry logo to return to the screen, but no startup loading progress screen never wouldn't come.

  I could never get to the home screen, but the phone was actually 'ON' below.  I could call the phone and it should sound, but there is no visual indication that the phone was working and there was no way to respond.  Sliding down to unlock simply revealed the word "blackberry" in the middle of the screen.

  I did a Batt pull and this time, the logo appeared as before, but disappeared forever... and then the progress of boot screen appear.

  The words 'from 10 Blackberry OS' were visible on the bottom and rotate it beween this and "install updates".

  Start-up took a LOT of time (15-20 minutes?) but after that, everything was fine.

  Displayed software update version information and it is indeed updated to 10.3.2.2168.

• x 305-q706 Stuck on splash screen where is says "Qosmio" with please wait...

  Hello

  recently purchased a Qosmio x 305-Q706. First time I booted up it gets to start with Qosmio screen displays with "please wait" down and hangs there forever. The only way I can get it to boot is to start cold and purée the key F12 for is loading from the startup screen, if I'm lucky, I can enter the option where you can choose which startup device, and if I manually chose the hard drive I can load windows.

  Someone at - he heard of this problem or how to fix it? I tried to change settings in the BIOS nothing. Re-iterate, it is stuck on the screen with Qosmio pslash, and if I press a key on the keyboard once it says "Please wait...". "he brings me just to the bios: (.)

  Any help would be appreciated.

  Hello

  This is a very stupid situation and I really don't understand why the laptop hangs at this level to start.
  Is somehow your Qosmio confused and cannot decide which device should be the first boot device.
  What is some external device connected to your Qosmio laptop?

  Maybe update the BIOS can help, but if you have all new laptop is not the solution. This is more recent laptop, and I presume that there latest version of the BIOS. So, if I were you I would contact either your dealer and ask for replacement or Toshiba service directly. This behavior is certainly not strange and laptop crashes somehow on the BIOS/POST (Power-On-Self-Test).

• Satellite Pro U400-130 - "Please wait" is displayed during startup

  I brought a new laptop Satellite Pro U400-130.
  While the l' interrupteur switch on the laptop, each time between the initial screen (vista logo) & the Welcome screen, please wait for t0 60 63 seconds continuous screen is this normal.

  Maybe its waiting for a network connection? Try to disable network devices in Device Manager and reboot.

  Or if you have installed an antivirus program, check that its not not looking for a floppy disk at startup drive.

  Vista event viewer can tell you which delays the startup process.

• Try to use ePrint, get the message "Please wait HP Print complete previous jobs.

  Printer photosmart = 5510

  Conputer laptop computer = HP Pavilion

  OS = Windows 8.1

  Try to use ePrint, get the message 'Please wait while HP Print complete previous jobs' status is displayed 1 point with zero page. Green bar keeps scrolliong in the top of the window. Tried to cancel this job without success. Someone at - it ideas?    In my view, that the "previous work" was sent to ePrint before mobile computer account registration has been made.

  Hi @jhaiar ,

  I understand that you are a problem with ePrint and your Photosmart 5510. I want to help you with this.

  One option is to remove web services, and then turn it back on. Unfortunately if you have customized the ePrint address, you will never lose it. You can always create a new address, it cannot just be old.

  HP has a support group of service based for Cloud related issues. This means no warranty or support costs.

  If you do not want to remove the web services, give them a call. They might have another option.

  Please contact our Cloud Services at 855-785-2777.  If you do not live in the United States / Canada region, please click the link below to get help from your region number.  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• Populating list. Please wait

  Is it running when you call the palette search in LV2010 have it, every time, display a popup that says "fill list...". Please wait... " It takes a while and sometimes its boring.

  Change your preferences.  In tools-> Options, under commands/functions Palettes, choose "Load pallets during launch."  It will take a little longer to load, LabVIEW but then all pallets will be in memory and will not delay.

• remote desktop hang at 'Please wait for the system event notification' during logoff

  When I disconnect a remote connection, sometimes the GET logoff screen stuck at "Please wait for the system event notification" next time I try to open a session.
  This can also happen if that I disconnect the user, but the user seems to weigh on this same screen as well.

  There is a particular difficulty for this?  I can connect as long as administrator to another account, I can't kill connection attached somehow to be registered in the next time?

  Thank you

  Hello

  I suggest you to take a look at the answer in this thread and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/Sens-could-not-connect-to-the-system-event/4e5a04e9-88f8-4017-9416-2ca67c5ce7c5

  Hope this helps,

• Configuration automatic please wait blinks on the screen every few seconds, why?

  Whenever I start my computer a small window with the text "Auto Config please wait" flashes in the center of the screen every two seconds. This continues for a few minutes. After that he produced intermittently, but each time that it the screen dims and for a few seconds, I am unable to do anything either, no key or mouse fills it. Any suggestions? I scanned and repair errors and defragmented

  Hi YvetteBarnes,

  1. did you of recent changes on the computer?

  2. What is the version of Windows installed on the computer?

  3. What is the number of brand and model of the computer graphics card?

  The error message occurs generally if there is a problem with the monitor adapter or graphics on the computer.

  Method 1

  I suggest that you change the resolution of the screen on the computer and check if the problem persists.

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Method 2

  If the previous step fails, then you need to update drivers graphics card on the computer manually by visiting the card manufacturer's Web site and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem persists, then connect another monitor to the computer and check if it works.

  I hope this helps!

  Halima S - Microsoft technical support.

• VISTA FREEZE AT STARTUP - PLEASE WAIT

  Hi need urgent help! PLEASE

  Last night Windows Vista Home d/load updates new update - IE 8 and I uninstalled Avast anti virus and put on PC Tools antivirus. He asked me to reboot I did and now when you start it freezes on the screen "Please wait" the circle continues to run and is as it is in train of thought, but nothing. I tried to start in Safe
  mode with and without networking with the command-line - all with the same result.

  This Acer is fairly new, the last month or two, not sure of exact specifications, but I don't even have the ability to repair vista or restore it from a previous configuration. Only the options as safe mode to get those and start windows normally.

  The computer came loaded with Vista Home pre and so I don't seem to have the discs. I know that normally the backup of vista is located on the drive partition, but how do for her if I can not load in Windows? I need to solve this problem, as long as it's not not my computer and feel very guilty!

  Please, if you answer no to answers tech difficult indepth I know a little but good not to juggle with the inside of the model...

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  You press Alt and F10 for an Acer eRecovery Partition.

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  See you soon.

  Mick Murphy - Microsoft partner

• Switch 10 - Please wait while we install an update of the system

  Hello

  Recently, I brought a switch 10. Whenever I turn on the camera, I see the Acer Logo and he said: "Please wait while we install an update of the system.

  I must have started the device about 40 times now, but it does every time.

  Windows updates are up-to-date and are therefore all updates from Acer.

  Any ideas on how to stop this happening?

  Thank you

  Cory,

  Sorry for the previous post - I just noticed, that last Wednesday, you published an update of the BIOS (1,16).

  Guys, I'm happy to admit that this update has fixed the problem for me. Although I had hurt a bit (I had to restart Windows in order to restart the upgrade process) and after you apply the fix on the first start, that I was also able to see the spam message, at the next start-up went well.

  Thank you for the support, now my switch behaves as expected.

  See you soon!

  Hubert