Pavilion DV5 2050CA: upgrade memory does not not about DV5 2050 this laptop computer

Similar Questions

• My hp pavilion elite hpe-204f video does not work

  My hp pavilion elite hpe-204f video does not work so I replaced it with another video card that worked. After installing the card and start the system I saw the video on my monitor. Great! I need to replace my video card. No problem.

  Afer by purchasing and installing a new video card, I have no video. I put a new one in another computer. This works. I put the video card which worked yesterday... that did not work.

  Then, I put the original video card that I thought that did not work on another computer and Yes... it worked.

  Should I assume that I have a bad graphical location on the motherboard? If so, short of buying the same motherboard is there anything else I can do?

  Thank you very much for the research.

  Hello

  The integrated video processor still works when the video card is removed?  If Yes, then try this memory bootable Diagnostics CD. Download memtest86 iso file and burn the disk using Imgburn.

  If the above is successful, then re - install the map graphic and clear the CMOS.

  Another thing to try:

  A good cable video know.

  A known good monitor.

• I have a HP Pavilion notebook. My system does not detect my sd card and I can't eject. Help?

  Original title: undetected sd eject not

  I have a HP Pavilion notebook. My system does not detect my sd card and I can't eject. Help?

  From my understanding, most laptops allow you to simply remove the SD card back.  Others have a simple spring mechanism that requires you to press the memory card slightly until you hear a "click", similar to a click on a retractable pen, which must eject the card.

• Acer Windows 7 upgrade kit does NOT work!

  Hi I have an Acer Aspire 5538 (4 GB of RAM and 220 GB of memory) I'm trying to upgrade to Windows (vista and both are family premium). I read elsewhere on the site that someone had the same problem as me and earasing everything on computer seemed to have worked according to your suggestions (so I did and put everything on my USB). Later, I used the "dics ghost" factory, which deletes the database from the computer to the factory settings. So I'm trying to upgrade and the first CD has worked well "Acer upgrade disc. Now, when I put in the second one it says that my pc is not compatible, and that my pc must be x 86 (32-bit) or x 64 (64-bit). I went into the "system information", and it clearly states "x 86 based PC" until I do?. The second disk named: "Windows 7 upgrade media" does not work!

  Even I am confused. Tell you what, download Windows 7 Home Premium. ISO image, burn it to a blank DVD and use your product key to install and activate it.

  Windows 7 Edition Home Premium x 64 (64-bit)

  English: http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65733/X15-65733.iso

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

  ImgBurn - supporting the creation of CD more. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

  Download and install burn ISO Gear (free):
  http://www.GearSoftware.com/gear-ISO-burn.php

  Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

  ------------------------------------------------------

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the system drive, click on remove (DO NOT remove the recovery when it exists)

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

• increase ram 2 gb 6 GB shared memory does not increase

  I upgraded my ram that 2 GB to 6 GB but shared memory does not increase

  There are limits to the amount of memory can be used for shared graphics.

  Generally, configuring shared memory allocation is done in the BIOS.

• Satellite A100-828 - new module of memory does not

  Hello

  I recently bought 2x2gb modules for my A100-828. However, I can not any memory module to adapt to the second extension slot. I tried both the new modules in it that the old module of 512 MB which was originally in the laptop. The new memory is certainly compatible as two new modules work in the first expansion slot.

  Memory does not seem to fit properly in the second slot (I put in a good sense ad. it won't push back.)

  Anyone have ideas, what is the problem?

  Thanks for your help.

  Hello

  I put t know why do not the module in the second slot.
  The two sites are completely identical and also support the same standard.

  I think you used it just not compatible modules, or you have tried inserting modules backwards
  AFAIK you need DDR2 667 MHz (* PC2-5300 *) module SODIMM 200 PIN.

  What module do you use?

• Satellite Pro A300: Win 7 Upgrade DVD does not list my laptop model

  I bought a Satellite Pro A300 that came with Windows Vista pre-installed on it. I was offered a Windows 7 Uprgrade for 30 by Toshiba that I bought and got 2 discs:

  (1) Windows 7 Upgrade disc
  (2) Toshiba Win7 Drivers Upgrade drive

  I have updated successfully however the drivers Toshiba disk does not list my model of laptop. I tried to install the drivers on the disk for the OEM software such as drivers of web cam (which are not available online), but they do not work. Also now my DVD player does not open and I can't view the contents of the disc?

  Can someone advise who I come into contact with to get a drive for my laptop model?

  Hello

  What model of laptop do you have?

  Have you tried to choose another model instead of your laptop model?
  Do this!

  I read about a similar question here in the forum and the user could solve this choose another laptop model number.

  By the way; all Win7 drivers can be downloaded from the page of European driver from Toshiba:
  http://EU.computers.Toshiba-Europe.com

  See you soon

• Windows 7 Upgrade Advisor does not work on my Windows XP Professional

  Windows 7 Upgrade Advisor does not work on my laptop Windows XP Professional Version 2002 SP3 (Panasonic-CF-30). Is there a reason why?

  One thing that can stop him to run the .net framework.  Please ensure that the latest version is installed.

• Windows anytime upgrade key does not work

  After trying to upgrade my OS Windows 7 Home Premium to Windows 7 Professional, I received the following message:

  
  
  "Enter a different upgrade key
  The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade.  Enter a different key. »
  
  
  Just to be sure, I tried upgrading several times, but got the same message.
  Due to manufacturing defects, my laptop had to be repaired three times.  The motherboard has been replaced twice, the hard drive has been replaced three times and the processor once.  In fact, just a year last month, it still does not properly.  I bought the Windows Anytime Upgrade [upgrade to Windows 7 Professional to Home Premium] at the same time that I buy my laptop. Each time, except this time, I got to spend my OS.
  The operating system on my laptop is now Windows 7 Home Premium [SP1]
  Another thing, I bought this laptop until I moved to the United States to Asia.  If this may have something to do with the problem that I am facing?
  In any case, I hope you can help.  It is difficult to really buy a lemon manufacturing refuses to stand behind and now having this issue, where I can't upgrade the OS that I bought.
  I hope you can help.
  Thank you in advance.

  If at any time the upgrade fails, Windows Anytime Upgrade Fail:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and maintenance records

  and the difficulty of corrupted data, the tool is listed under kb947821 we find at the following link

  http://support.Microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

  http://msdn.Microsoft.com/en-GB/academic/bb250622.aspx - License of MSDN AA

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

• Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.

  Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.  I see other people have had similar problems, but I am not able to follow these solutions and would very much help here.  I have an IMac.

  If you had probably two problems

  Permissions, the other is the hardware problem causing slow import and the card cannot be read by your operating system.

• CS6 free upgrade download does not accept my recent acquisition of the CS5.5 serial no, why?

  CS6 free upgrade download does not accept my serial number of my recent purchase of the CS 5.5.  Why?

  Hello

  CS 5.5 serial numbers will not be accepted to the CS6. If you are eligible for free upgrade CS5.5 at CS6 then you will receive a confirmation e-mail from Adobe your new serial number.

  -Eric

• * Problem * windows 7 does not recognize it is a laptop (Solved)

  Hello

  today I installed Windows 7 on my old laptop, now it does not recognize it is a laptop, I can't change my screen brightness has not resolution in its own right (1200 x 800) now my screen resolution (1024 x 768). He also thinks I have monitor generic PnP, Please help... I need this resolved until Monday...
  

  Windows also not showing the screen brightness in Mobility Center
  

  It's also not show memory total

  
  You can see it is a Dell laptop, but still its not recognizing my display or bad drivers are installed. PS I went to dell website to download official drivers for Windows 7, but they can't stand not win 7 for this model.
  

  MY LAPTOP is DELL INSPIRON 1501
  I installed an original copy of windows 7 downloaded from digital river...
  Please I need quick solution...

  Hi Tayyab

  When you decide to install a new version of Windows on an older computer, the first thing you need to do is to consult the manufacturer of the computer for the hardware drivers that are compatible with the new version of Windows.

  The support material General laptop Dell Forum:

  http://en.community.Dell.com/support-forums/laptop/f/3518.aspx

  Search for your Dell product.

  Dell support service provides support for your Dell product:

  http://www.Dell.com/support/home/us/en/19/products

  If Dell does not support the hardware on this model, you should try to find compatible drivers directly from the hardware manufacturers.

  In Windows 7, press the Windows key + R to display the run dialog box.

  Type msinfo32 in the Open box, and then click OK.

  This will display information for the laptop, including all the material and information on the pilots.

  Concerning

• Windows 7 - DVD does not read the disk on the computer.

  My DVD does not read discs, when I click ion DVD player on my desktop shows insert a disk me error help

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Sorry, your subscription free story does not allow access to this application. Please update your subscription.

  I want to use the desktop Adobe Story version, but I can't. I downloaded, but when I open the software wants to connect adobe ID...

  Then, a window like this... Sorry, your subscription free story does not allow access to this application. Please update your subscription.

  I press the button upgrade that I have an error message in this link

  https://www.Adobe.com/cfusion/store/handlers/eLicensing/trialconversion.cfm?locale=EN_US & s ku = 10006855

  I don't know what I have to do... Is also that these must always be difficult!

  Hello

  It helps if you open this link in your browser's private browsing mode and then go further?

• Colud not answer your request because photoshop does not support video on this version of windows, what can I do

  Colud not answer your request because photoshop does not support video on this version of windows, what can I do

  Upgrade to a newer version of Windows, or find a program that will run on the old Windows software.