increase ram 2 gb 6 GB shared memory does not increase

I upgraded my ram that 2 GB to 6 GB but shared memory does not increase

There are limits to the amount of memory can be used for shared graphics.

Generally, configuring shared memory allocation is done in the BIOS.

Tags: Windows

Similar Questions

  • Satellite A100-828 - new module of memory does not

    Hello

    I recently bought 2x2gb modules for my A100-828. However, I can not any memory module to adapt to the second extension slot. I tried both the new modules in it that the old module of 512 MB which was originally in the laptop. The new memory is certainly compatible as two new modules work in the first expansion slot.

    Memory does not seem to fit properly in the second slot (I put in a good sense ad. it won't push back.)

    Anyone have ideas, what is the problem?

    Thanks for your help.

    Hello

    I put t know why do not the module in the second slot.
    The two sites are completely identical and also support the same standard.

    I think you used it just not compatible modules, or you have tried inserting modules backwards
    AFAIK you need DDR2 667 MHz (* PC2-5300 *) module SODIMM 200 PIN.

    What module do you use?

  • Pavilion DV5 2050CA: upgrade memory does not not about DV5 2050 this laptop computer

    The upgrade of 2 x 4 GB 2x2gb memory does not work. After installing the new memory modules, it starts and the HP Quickweb are visible. As a result, if I try to load Windows 7, he returned to the screen of Quickweb. If I install only these new memories (1x4Go config), I get the error Badpool header.

    The NOTE book details are:

    Model - DV2050CA

    Produnt number - WQ748UA #ABC,

    2.26 GHz, Intel i3 - 350 M processor

    Max - 8 GB of memory

    Details of the memory module are:

    Kingston ValueRAm-2 x 4 GB, PC-10600 1333 Mhz, DDR3, SDRAM, CL9 SoDIMM.

    Can some please help me make it work?

    Yes, computers laptops HP prefer the variety of low density of memory. This means that 8 black blocks of memory on the side of the chip, not 4.

    4 GB 599092-001

    Above is the part number of HP for a 4 GB module.

    http://www.Amazon.com/HP-VH641AT-4-GB-DDR3-PC3-10600/DP/B0030L3B8E/ref=sr_1_1?ie=UTF8&QID=1446634397&SR=8-1&keywords=599092-001

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • trying to share a printer, so I can access it from another computer on my network, it seems to cross but the shared icon does not appear

    Original title: sharing printer problems!

    I am trying to share a printer, so I can access it from another computer on my network, it sems to cross, but the shared icon does not appear? Why is this?

    I'm on windows xp professional

    Hi Pazza1995,
     
     
    Follow the steps listed in the articles below and check if it helps to fix the problem:
     
     

  • Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

    I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

    Hello

    Method 1:

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:

    You can also view the related items for more information.
    The problems of Internet connection

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    Network connection problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    Solve problems, find wireless networks

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

    Method 3:

    Setting up a wireless network

    http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

    Wireless network card: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

    See also:

    Connect to a network with Windows Vista wireless

    http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

  • Installed new router WAG160N and my Windows Media Player 11 media sharing now does not work

    I have a netgear wireless router which is dead. However, I've never had any problems with the media file sharing with WMP 11.

    After this router my media sharing file does not work. No devices appear at all.

    I use an Archos 605 PMP

    I have the latest firmware for the router installed

    I have not changed the default settings of the router at all. I tried to disable the firewall, but this did not help.

    Can anyone help? Thank you

    I now sort it and everything works.

    Removal of Windows Player 11 and reinstalled him there.

    Enabled on my Archos 605 WiFi

    then to the library, the sharing of multimedia files and my Archos was there in its entire splendor.

    Now I can now stream the content from my PC to my Archos

  • Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.

    Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.  I see other people have had similar problems, but I am not able to follow these solutions and would very much help here.  I have an IMac.

    If you had probably two problems

    Permissions, the other is the hardware problem causing slow import and the card cannot be read by your operating system.

  • DVD - RAM on my Equium A100 (PSAAQE) drive does not recognize CD - R discs

    I just installed XP Pro on my tosh equium a100 provided vista as it ran very slowly and I had endless problems.

    All works well outside the DVD RAM drive, I got the correct driver from the toshiba support site and works in deivice managing all the and correct, I installed nero and decided to burn a Music Office but nothing helps, after selecting tracks nero don't does not reckognize the player in the drop down list only CREATE ONE IMAGE was available?

    Can someone advise?

    Thanks in advance

    I should try the following steps:

    First, you must remove the drive from the Device Manager and restart the laptop. After you restart the operating system should recognize the new device (ODD) again.

    Then, open the registry and delete the upper and lower filters of the key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Then reboot again.

    Once these procedures please try again if the player works!

  • shared variables does not

    Hello, I'm writing because I'm having a problem with the use of shared variables. I am doing a project for College and I use the DSC for his shared variable function. The problem im having is that shared variables do connect it no more. I followed a document "Getting started with LabVIEW Datalogging and supervisory Control Module" and managed to build an IOServer and shared variables in accordance with the document to deploy successfully. It was a few days ago. Today when I opened the project file even shared variables would not connect. IM also having the same problem with other projects that I made over the weekend that worked, but do not work now.

    Does anyone else have this problem?

    Hi Justin,

    I am pleased to see that you are able to work with your LabVIEW installation now. 0x0000002A error message reported only in what concerns the communication between the shared variable engine and part mutual FUND of the DSC module is blocked.  This was usually resolved by inspecting the security settings Windows for the firewall, as discussed earlier.

    As for your second question, it might be better to start a new post.  However, please specify what files you want to move and what wisely win. Where would you like the directory that is to be held and for what benefits?  If you are hoping to achieve a gain of performance or similar, there may be different approaches other than moving files.

    Kind regards

  • Update problem/Slot memory does not

    I have a HP Pavilion G7-1260us.  The laptop came with 4 GB of memory module in a slot.  It is expandable to 8 GB, 4 GB in 2 homes.  I bought a module of memory of 4 GB installed and it did not work.  I thought that the system was not read this particular brand on memory, so I brought back and got another brand.  It's the same thing.  System does not recognize the memory so I took out the installed memory, put the news and this worked.  I took that out, put the memory installed in another location and it did not work, so now, I'm pretty sure that the crack is not working.  My question is, if I buy a good memory 8 GB, then insert it into slot work, that works and the system will show that I have 8 GB?  Or this system won't recognize that 8 gigs if it is 2-4 concerts in each slot?

    Thank you...

    Yes and no, the memory is backward compatible. But the cards don't match doesn't isn't a question, and your runs a fast 1333, you don't want to slow down. Just get a card that matches your original!

    SO-DIMM-DIMM: occupied / unoccupied

    If it was a rattler...

  • shared variables does not not on PC

    Can someone tell the attached page, why my single variable sharing does not work with the LabVIEW application that I'm running on my PC. I put the variable 48 (I thought), and again in la OR Distributed System Manager, the value is not changed.

    Reset that my PC seems to have understood things works better. The VI is now able to read/write the shared variable.

  • How can I connect to the internet? Problems involving the network and sharing Center does not.

    Hello.
    I live in a House and bought a range extender so that I can get a connection in my basement as well.  I have installation range Extenders without problem.  When you install the range extender, I changed my name to my network router.  I changed the name of the network by typing 192.168.1.1 in my browser.
    The MacBook connects without a problem.  In the basement, the connection of Windows 7 works very well.  I have just connected Vaio Windows 7 my mother to the network, but it prompted that I enter the user credentials.  I read a post above and got that problem solved by opening the network and sharing Center and adding a new connection.  Now that the connection is configured correctly.
    The problem is with the laptop HP Windows Vista family basis.  Since I install the range extender, I can't connect to the network.  He had no problems before you connect the router or other networks to visit other places.  The new network name appears, but when I click it, it says I have to enter the user credentials.  I tried to manually, but the name is taken so I can't make a new and invites me to connect to the network that is established or to connect to a different network.
    • I tried to open the network and sharing Center, but it does not open.  When I click it, it opens a screen for a brief second.  The option "Display the status of network and tasks" opens either.
    • I logged as an Administration by entering the command line < net="" user="" administrator="" ctive:yes=""> > and restarted the laptop.  Even logged in as administrator, this folder does not open.
    • I also did a scan < sfc="" cannow=""> >.  The digitized rolled up with an error, but the error has been corrected.
    • I also updated the connection of the range extender.
    Why the network and sharing Center will not be open to the top?
    How can I configure my router my HP Windows Vista Linksys connection?
    Thank you.  Please let me know if you need more information.

    Thanks for your reply.

    In a last attempt, my sister has used the ethernet cable to connect directly to our router.  Next time, she turned on her laptop, she managed to connect to our wireless network and she was not invited to enter credentials.
    In this case, the manual connection helped solved the problem.

  • Network and sharing Center does not open

    I get this error when you click "Open network and sharing Center" in the icon in the system tray wireless network connection.  In addition, same error when you click on "View the status of network and tasks" in the Panel.

    [Window title]
    : {26EE0668-A00A-44D7-9371-BEB064C98683}\3\::{8E908FC9-BECC-40F6-915B-F4CA0E70D03D}

    [Content]
    This file does not have a program associated with it for performing this action. Install a program or, if such is already installed, create an association in the default programs control panel.

    [OK]

    This all started with the question of the status of dead network icon (I'm under Win 7 Ult x 64): (http://social.answers.microsoft.com/Forums/en-US/w7network/thread/c3ee2c3f-82e5-44c7-8f40-ee7fb7f48c83)

    Found the answer, although I had to hit some unknown sites to get...

    http://www.Neowin.NET/forum/topic/597084-cant-open-network-and-sharing-Center-at-all/page__s__7f0aa9d03ff6176913fac7cf9fabe1de

    Here are the error messages which started my crazy searching for an answer:

    [Window title]
    Explorer.EXE

    [Content]
    This file does not have a program associated with it for performing this action. Install a program or, if such is already installed, create an association in the default programs control panel.

    [OK] [Window title]
    : {26EE0668-A00A-44D7-9371-BEB064C98683}\3\::{8E908FC9-BECC-40F6-915B-F4CA0E70D03D}\Advanced

    [Content]
    Windows cannot find ': {26EE0668-A00A-44D7-9371-BEB064C98683}\3\::{8E908FC9-BECC-40F6-915B-F4CA0E70D03D}\Advanced'.} Make sure you typed the name correctly and then try again.

    [OK]

  • Why to the can't 'Shared VMs' does not allow to share folders with the host and why the copy/paste does not work on them? :-((

    I want to put in place a "build mini-server' for our team. Since VMware Player is not taken in charge more I had to use VMware Workstation, and with some success, I put things up. But now more and more surface of trouble!

    To enable auto-start for the virtual machines, they must obviously be "shared." But it looks like, with this, the nuisance that these virtual machines cannot share folders more with the host. And also, it seems that copy and paste does not work with these "shared VMs.

    Is there a work around to get these features also works with 'shared VMs?

    It is VERY annoying and tedious to always have to these VMs to shuttle between shared and non-shared mode just to be able to transfer data or new versions of code for them!

    Thank you for using the workstation. How to create a script with:

    WS t vmrun start "c:\my VMs\myVM.vmx".

    And add the script to the Windows Task Scheduler to run at startup.

  • Shared action does not of course 7 to 9

    All,

    Is there any known issued with not shared actions convert Captivate 7 to 9?

    I'd build one to replay a slide from the start, but now that we've updated the action does not work... and I can not understand how to open it to see what I did in the first place.

    Help with this dilemma would be appreciated.

    v/r

    Jay

    Joint actions have been improved in CP8 compared to CP7, because the variables and literals have been added as parameters. This could be the cause of your problems.

    Recently, I explained two scenarios for slides of Replay, maybe this can help: BACK (slide) - Captivate blog button

Maybe you are looking for