Pavilion dv6: install a bisides additional ssd HARD drive

Similar Questions

• Pavilion G-6 2209au: Pavilion G - 6 2209au exchange for SSD HARD drive

  Hello I have this have upgraded with 6 GB ram and now want to replace the disc for one SSD HARD drive, I read in the forms some how you need to change the bios when you do so, what measures are necessary for the ssd to function? I don't like about backing up files, I'll use as an external HARD drive. Also I have the apu a4 4300 m and would like to get 10 4600 m cpu is this hard to replace or should I pay someone? Thanks for the support

  That's what you have:

  http://support.HP.com/us-en/document/c03551667

  It is the repair:

  Manual

  From the outset I see that you only have 2 GB of RAM. Very easy and inexpensive to spend at least 4 GB. See page 46.

  The motherboard is the motherboard. There is no upgrade available. However, you have the CPU AMD A4 and you might fall into a 10 - 4600M. See page 83. It would be a major update and only would no treatment faster, but would provide a slightly better video chip since it is a "APU" with processor and video on the same chip.

  Finally, you can exchange the mechanical drive to a SSD drive. The upgrade of the speed would be very noticeable.

  That @banhien meant, however, the cost of this can equal or exceed a new laptop. and almost certainly will if you need to pay a technician to do it. The first update I is the RAM, then the SSD and then the last would be the CPU. If you need any help post more come back.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP pavilion dv6-3079tx: lost drivers after crushed hard drive and repair discs

  Hard drive crashed and replaced the HDD with ssd, lost all recovery disks then upgrade to 8.1 windows now I have not all drivers as finger print scanner and cd discs won't load. It's a hp pavilion dv6-3079tx

  Help, please

  Thank you

  @Leady05 ,

  Hello and welcome to the HP support forums.  Sorry to hear about hard drive failure.  Now for the bad news.  There is no driver support for windows 8.1 for your laptop.

  The laptop was produced with Windows 7 32-bit and 64-bit edition not windows 8 or 8.1, so it's drivers did not support to your system unless you reload Windows 7.

  HP Pavilion dv6-3079tx Entertainment Notebook PC Drivers

  This link provides all the drivers for your system.  If you reload windows 7 you will have no problems.

  Thanks for posting and have a great day.

• Pavilion g6-2330ee: SSD hard drive

  Hi all

  I have HP laptop Pavilion g6-2330ee.

  My quastion is: my laptop supports the SSD hard drive?

  Thanks to you all.

  Hello

  Yes, he does. Nothing can stop it. Please use ONLY know brands.

  Kind regards.

• Can I install SSD hard drive in the version of Windows XP Media Center 2002.

  Original title: ssd hard drives

  I have a Sony desktop running Windows XP Media Center version 2002. I am thinging about buying an SSD hard drive. I was wondering if it will work

  Hi Mike,

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  From your problem description, I understand you want to find out if the SSD is supported in the version of Windows XP Media Center 2002.

  What is the model number of the computer?

  Windows Media center supports the SSDS. However, when buying, check with the manufacturer if the hard drive is compatible with Windows Media Center operating system in 2002.

• How to change back to SSD HARD drive?

  My mcbook pro comes with the original 500 GB of HARD drive. When he ran with a problem, I went to an apple repair shop. Problem was in the charts, and he suggested the HARD drive to be replaced by a 120 GB SDD. So it has been replaced, but the guy on the left HARD drive as a storage device. Moment where DDI is left with small space and when I update to OS X El Capitan of OS Sierra, it had to be installed in the HARD disk drive. Could someone please give instructions to install the new OS to the SDS to lose all my data and the current configuration and it is also possible to install windows XP on the HARD drive and 10.  Either by the way, I got Windows 10 and XP shared with the SDS via parallels. Thank you

  I think this can be useful for you:

  How to use an SSD with your HARD drive If you want to use an SSD as boot with your existing HARD disk drive, as the disk 'data', here is what you can do. After installing the SSD, you need to partition and format the SSD using disc utility disc. Then install OS X on the SSD. Once installed OSX boot from SSD. Startup disk preferences to set up the SSD as the boot volume. Open the preferences users and groups. Click the lock and authenticate you. Or CTRL - RIGHT click on your username account list in the sidebar and select Advanced Options in the context menu. You will see a field called "Home dir: ' on the far right, you will see an Edit button. Click on it. In the file dialog box, navigate to the location in house now located on the HARD disk (disk HARD/users/user_name /.) Select the folder, click the Open button. Restart the computer, as shown. When the computer starts, it will now use the home located on the HARD drive folder. Another more technical method involving the Terminal and the alias is discussed in depth here: using OS X with a SSD and HDD - Matt Gemmell configuration. It's my preferred approach because I can choose which records of the House, I want to on the HARD drive and I don't want to. For example, I like to keep Documents and library files on the SSD because I frequently access their content. Make sure that you keep the bootable system entirely on your HARD drive where you need it.

• Satellite L50 - A-1 DG - with the new SSD HARD drive replacement

  Satellite L50 - A - 1 DG

  I would put my SSD in the PC and install win7 on it. But it does not work.

  I try to put the SSD into the DVD rom adapter. It can not been recognized in the bios.

  I tried to replace the SSD hard drive. Then the pc cannot start up. And I can't get into the bios or adjustment.

  Someone knows what's the problem?

  > I try to put the SSD into the DVD rom adapter. It can not been recognized in the bios.

  This does not work with all models of laptops.
  As far as I know that the laptop must support Slim Select Bay and the BIOS should also support this hardware option. But in your case, it doesn t.

  One possible solution is the use of SOLID-STATE drive instead of the HARD disk.

  You said that you are not able to access the BIOS after these updates.
  Well, before you do this (a SSD drive connection) you should access the BIOS and must disable secure boot and must set the start mode MSC mode.

  The comments appreciated.

• Replace T420s with a new SSD HARD drive

  Hello

  I wonderd if it is possible to replace with a new SSD HARD drive, while putting the HARD drive in the Bay of Ultra-slot.

  And if so, what SSD model should I buy, and how do I transfer the operating system and the data for the SSD?

  This SSD model will be compatible?

  Corsair neutron Series 120 GB SSD Sata III MLC 2.5 inches Retail

  Thank you very much

  Guy

  Yes, what you are proposing is quite feasible. You will need an adapter Ultabay to organize your HARD drive in the Ultrabay housing on your system. These are available from Lenovo, but are relatively expensive. You can get a much less expensive (~ $ 10) a compatible version on eBay. It is not as well finished as the real issue, but it works well.

  The best way to transfer everything on your SSD is "clone" of your HARD disk using a software as Acronis True Image. If your current HARD drive is made by Western Digital or Seagate you can get a free copy of Acronis on their Web site. Put the SSD in the SATA drive Bay and the HARD disk in the UtlraBay. Set the T520 to start from the Ultrabay, install/run Acronis here and make a clone for the SSD. Then boot from the SSD and you'll be all set.

  With respect to the SSD, many people here have had good success with Crucial M4, 520 Intel and Samsung 830. I guess that Corsair works perfectly as well, but I didn't know all messages from people here who have done so.

  Before ordering a SSD confirm if the HARD drive is 7 mm or 9.5 mm thick. Then order the same thickness SSD. This way, you will be able to use the metal rails caddy and rubber who now hold your HARD drive to contain the SSD.

• 17i wanted to replace SSD HARD drive

  I just bought a new screen Envy 17 t tactile image with a 1 TB HARD drive 5400 RPM. At the same time, I bought a new Samsung 840EVO 500 GB SSD with the intention to replace the slower HARD disk with the fastest SSD. I thought it would be a simple switch (I replaced the older drive in my laptop with no problems). I thought it would be a few screws and a small sign removed from underneath the laptop and everything would be made.

  But after I got the new machine, I got everything install and running and left information for the SSD HARD drive, I have everything off and returned the machine and unfortunately... There are no signs (as described in the documentation) that I expected. She only siingle piece!

  How to HARD drive to replace it? Am I supposed to remove all the screws and remove the bottom or top (where the keyboard is) does jump off and you have access from above?

  Help!

  This model requires the removal of the top cover to the hard disk:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c04339451&DocLang=en&docLocale=en_US&JumpID=reg_r1002_usen_c-001_title_r0007

  This is not a procedure authorized user and will jeopardize the warranty if something is wrong in the process.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Iso file of windows xp can directly be installed USB on a formatted hard drive?

  Iso file of windows xp can directly be installed USB on a formatted hard drive?

  Not directly.

  There is a SMALL chance that if your hardware supports it (unfortunately never say you anything on your PC or BIOS), you can boot from a USB stick or an optical drive and install Windows XP like this.
  But it is unlikely.
  In addition, tell us what you mean by 'windows xp iso file. This is very vague, and we do not know what you are talking about.
  Finally, if you want to ask questions here, really read the answers and recognize them in some way. Here is a link to your other thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/which-software-should-i-use-to-burn-Windows-XP-ISO/ffd9ccb8-0248-4e1f-afd3-6ce14802348a

• How to install Win7 on a new hard drive

  My HARD drive is a failure by the SMART test.  I have already backed up everything and I bought an SSD to replace the HARD drive, if I use the DVD of reinstallation of Win7 which accompanies my Zino to install Win7 on my SSD?

  Thank you

  Tim

  Hi Tim,.

  You can use the reinstallation disk that came the system to install Windows on the replacement hard drive. If you have created a recovery media you can use that as well to install Windows on the system.

  You can check the link http://dell.to/13nXHsM for the instructions on installing Windows 7. Once Windows is installed, please check the link http://dell.to/11fzwZM for the correct order of installation of the driver.

• I have a HP Pavilion dv7 and my agreement now bad hard drive to the Geek squad. Do you know where I could buy the recovery disk?

  I have a HP Pavilion dv7 and my agreement now bad hard drive to the Geek squad. My problem is that I'm not able to find my recovery disc and HP has no more of them. Do you know where I could buy the recovery disk?

  The official win7 ISO images can be downloaded here;

  http://www.w7forums.com/official-Windows-7-SP1-ISO-image-downloads-t12325.html

  You download the version installed on your HP, burn a dvd using ISO, software, the burning at the slowest speed, on quality discs, then install it using the Win Key on the label on your PC.

  You will then need to install specific drivers of HP, not of the preinstalled HP software will be at your disposal

• Can I replace the SSD HARD drive in my sve15123cv

  Hello

  I use sve15123cv, I want to replace the SSD HARD drive. Is this possible?

  Which SSD is good?

  Hi zunnun,.

  Thank you for visiting the Sony community!

  It is possible, but we cannot guarantee that it will work without any problem. You need to consider certain things such as the specification of the HARD drive, thickness or dimension of the SSD that you plan to install first. Your Vaio SVE15123CV is a non American model. Unfortunately, we do not have full details and specifications of your machine. However, you can coordinate with the Sony support based on your location or where you bought the device.

  For further assistance about your concern, please contact the representative offices of offices/Sony Sony nearest your place of residence in the Asia-Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to the proximity, they are in a better position to respond to your questions or concerns.

  Hope the link helps.

  Kind regards

  Vincent

  If my post answered your question, please mark it as "accept as a Solution.

• iMac mid-2010 for one SSD HARD drive replacement

  Hello

  After reflection, (mainly in the meantime my principalement en attendant mon iMac iMac starts!), I decided to replace the HDD with a SSD. After having done some research and I watch YouTube videos, I'm not sure if I have bought the right tools for the job. Could someone please help me and let me know if I'm not on the right track here.

  The iMac in question is a model 27 "2010.

  Here's what I have on order:

  • Samsung 850 EVO 500GB SSD
  • OWC online Thermal Sensor HDD upgrade 2009-2010 - https://www.amazon.co.uk/gp/product/B017OEQKV2/ref=oh_aui_detailpage_o00_s00?ie= UTF8 & PSC = 1
  • Kingston Technology 2.5 to 3.5 inches support and live for SSD - UTF8 & PSC = 1 https://www.amazon.co.uk/gp/product/B00DGL2X7I/ref=oh_aui_detailpage_o00_s00?ie=
  • 2 x cable high quality Original SATA 6 GB/s 3 - Gigabyte https://www.amazon.co.uk/gp/product/B00BBYOD3E/ref=oh_aui_detailpage_o00_s00?ie= UTF8 & PSC = 1

  I also ordered suction cups and relevant screwdrivers.

  I intend to completely remove the current HD and its replacement by the new SSD. Am I right assuming that I will just remove current thermal sensor cable and replace it with the one OWC? I'm not 100% on this one.

  Cheers in advance

  Ian

  Yes, you just remove the thermal sensor and place the OWC in line sensor (the sticker pad can be placed on the support of 2, 5-2, 5 (as the SSD will not have a lot of heat).  The longer a cable must be re-attached the logic board.

  The only suggestion I have would be - it probably need not SATA cables for this-> upgrade SSD HARD drive, thermal line sensor is long enough - in fact, too long that I had to press them to be shaped in the iMac.  Unless you plan to add other SSD in the system, since the iMac 2010 with SATA 2 (3 GB/s speed).

  Good luck

  Sam

• Install firefox on an external hard drive

  given that I live 6 montths on Gran Canaria and 6 months in the Netherlands, I would like to install firefox on an external hard drive, so that I have only to move somewhere for theother the external hard drive. then I can use all the information such as history of the e-mail and adressbooks ect on the two addresses

  http://PortableApps.com/apps/Internet/firefox_portable