Pavilion DV6 starts

Similar Questions

• HP Pavilion dv6 starts request at startup startup normally or repair problem

  Hello, HP Pavilion dv6 starts to start normally or Startup Repair request. Results of normal boot BSOD too fast to read.

  Startup Repair in execution, but 13 hours still not repaired. What should I do? My computer knowledge is poor in good conditions, but I'm at the point of turning into an expensive Frisbee. The fact that I have to use this UM netbook that will soon be a Frisbee is driving me crazy!

  It's a venerable laptop purchased Feb 2010. It is a Pavilion DV6 (model DV6-2005-TX) running windows 7 Home premium (32 bit) and updates only did a request from Microsoft, so are a lot of patches and fixed security.

  Help will be very humbly and grovellingly welcome.

  Hello

  The error code is different from the first, it is still a short drive self test failed and confirms that the drive must be replaced.

  A brief overview of how to replace the hard drive is detailed below.

  The player at the link below is an example of one that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 53 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• HP Pavilion dv6-3150us Entertainment Notebook not start after sitting on the side.

  Hello! I have a HP Pavilion dv6-3150us Entertainment Notebook that works under Windows 7. Last week, I traveled with him in Florida, and when I arrived and tried to turn on the laptop, it wouldn't start. The screen was white with thin lines going through it and the screen turned slowly black. I disassembled the computer and put it back together (which I have experience with, I installed a new fan at the beginning of last year) and he came in safe mode. This ihappened still once I put the laptop in my bag on back and then he pulled out a few minutes later (without even moving) and when I got home. I tested the hard drive and memory, and they both passed. Other that this question, the computer has worked fine. I need to get this problem solved, because I am a PhD student and travel frequently with your laptop. Could someone help me please? What causes this problem? Thank you.

  Hey irol72,

  Welcome to the Forums of HP Support! I understand that your HP Pavilion dv6-3150us is not initialize after being on his side, I understand your frustration and I would start you the black screen troubleshooting with no. Error Messages at startup or start-up.

  Thank you

• HP Pavilion dv6 does not start. CapsLock flashes 3 times.

  Hp Pavilion dv6 , I bought about 11 months ago. When I tried to turn it on today morning, it didn't start and the light caps lock flashes 3 times. I searched the Internet and discovered that it is a memory problem. Is there a solution to this problem so that I can fix it in the House?

  Hello

  Try to remove and re-seating memory module - the procedure is detailed from Page 68 of your & Maintenance Guide.

  Failure to correct the problem, as your laptop is still under warranty, your best option is to contact HP and make arrangements for this repaired under warranty - if necessary, you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Pavilion dv6 - 6c04ea battery alert on Start up

  Pavilion dv6 - 6c04ea

  Windows 7 Home Premium 64-bit

  All of a sudden, I started getting a message on Start Up of the HP battery alert. The message tells me that the battery level is extremely low and that I might have to replace it. There is a web address available to learn more - www2.hp.com/techcenter/startup/ (which address brought me to this forum)

  Controller battery charge at the far right of the status bar, tells me that there is no charge in the battery so that I can't use it without the power cord. He also tells me it does not load even if the power cord is connected.

  The laptop is 30 months old. Can someone tell me if there is something to try before I go buy a new battery?

  Thanks for any help you can offer.

  No. 30 months is worth about 65 battery years... not really old, but in the end of the life sector.  You could enter the program Support Center and look for advanced battery information and look to see how many cycles there. More than 350 is a good life. Weird, but it's time to get a new battery just.

• Pavilion dv6 Notebook: laptop still does not start if equipped upward of battery

  Pavilion dv6 daughter Notebook always primer not beyond the screen HP enrobeur battery if

  Product number: WR498EA #ABU
  Serial number: [personal information deleted]

  Operating system: Windows 7

  Hello @HPNovice1,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your notebook always primer if if mounted battery and I'd love to help you in this case!

  Since you have already calibrated and tested the battery, I suggest following the steps below re - install the battery method compatible ACPI Microsoft control:

  Step 1. Go to the Device Manager
  Step 2. Select the stacks
  Step 3. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
  Step 4. Click on uninstall
  Step 5. At the command prompt, put a checkmark in the box to remove the current driver
  Step 6. Shut down the computer
  Step 7: Remove the battery for a minute and then put new

  When the computer returns to the top it should automatically find the driver.

  Step 8. Go to the Device Manager
  Step 9. Select the stacks
  Step 10. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
  Step 11. Click "automatically search for an updated driver.

  Do the same thing with embedded controller compatible ACPI Microsoft.

  In addition, I also recommend you to restore your laptop default power plans by following the steps below:

  Step 1. Click the Start button
  Step 2. In the search box, type "Command Prompt"
  Step 3. Right click on command prompt

  Step 4. Click on run as administrator
  Step 5. At the command prompt, type powercfg /restoredefaultschemes and press enter

  reference: http://superuser.com/questions/669571/Windows-8-1-64-bit-power-schemes-gone

  If the problem persists, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• HP pavilion Dv6 laptop: does not start in normal mode, safe mode

  Hi all

  I have HP Pavilion DV6 laptop with windows 7 Home premium 64-bit OS. It was working fine up until two or three days.

  After that some software upgrades, it has stopped booting.   When I tried to start it in safe mode, it stops at disk.sys.

  I don't have win 7 OS CD or recovery CD.  So I downloaded the trail version of windows 7 SP1, I want to install this, but he is suspended the windows logo.  I Googled it has bitten, I loaded a linux kernel and access the hard disk.  I backed up all the files required by using this boot of linux.

  I don't know what to do now?  What is the problem with my system. When I ran the drive diagnostic. It was a failure. That means that I can't use this HARD drive?

  Any help is greatly appreciated.

  Concerning

  Stéphane

  Hi stephane,

  Well the error code certainly would indicate that the player began to fail, but just in case, you might try to wipe the entire hard drive first and then reinstalling the operating system as described below.

  Download and install Killdisk on the link below - (this application will write zeros to the entire disk).

  http://Software.LSoft.net/KillDiskSuiteFree-Setup.exe

  Download and install ImgBurn on the link below.

  http://download.CNET.com/ImgBurn/3000-2646_4-10847481.html

  Access the application of disc kill you have installed in all programs, open the main folder, then select Bootable Disk creators, then the BACK Bootable CD Creator that will burn the ISO on a blank CD bootable.

  During the following process do not worry about all warnings as your Windows 7 installation disk will reformat the HARD drive.

  Insert this CD into your PC which is unable to load the operating system properly. Close Notepad, and then start again to boot from the CD of Killdisk and follow the instructions on the screen to kill disk.

  A brief description of the process here is Killdisk.

  Use it to wipe the entire hard drive, Select (80 h) and press f10 (you will also need to type a confirmation and press enter) - ( This will make sure to include all of the partitions , and then start the process - this may take a few hours!).

  When the process is complete, remove the CD of Killdisk and try to reinstall Windows 7.

  If it still does not work, I think your only option is to replace the HARD drive.

  Kind regards

  DP - K

• HP Pavilion dv6 - slow start compared to laptop older?

  Hello

  I recently bought a new Pavilion dv6 but noticed that there a start more slow times compared with my old Toshiba Portege R705-P35. I'm just curious as to why this is since the Portégé has much lower than my flag specs.

  Thank you

  TheLongBoarder

  Hi TheLongBoarder,

  The slow start could be caused by several different things. The first thing you want to do when diagnosed with a problem with a computer, is if it's a hardware problem or a software problem. In your case, I think it would be a hardware problem. You shouldn't have a problem with the memory or the speed of your hard drive. This model must be run at least 4 GB or 6 GB of RAM.

  It also depends what 'boot' you talk about.

  1. if it was the boot of when you press the power button to the Windows login screen (post), it could be a problem with the BIOS. May not have the most recent version, or the settings in the BIOS cannot be addressed to optimize speed and start Windows.

  If the version of the BIOS is the problem, you can find the latest version by going to the page drivers downloads HP, select the exact model of your laptop (i.e.. dv6-6c35dx) number, select your operating system and navigate to the section called "BIOS". Follow the instructions below to check if the currently installed version is newer or older version online.

  1. Click on Start and then run.

  2. In the text box on the run window, type regedit and click OK. This will open the registry editor program.

     Note: Do not make changes to any entry anywhere in the registry editor to avoid causing serious problems in the system. These steps only directly allow you to display a registry entry, is not to make changes.

  3. Find the HKEY_LOCAL_MACHINE under my computer folder and click the plus sign (+) after the folder name to expand the folder.

  4. In records resulting, find and click the plus sign (+) next to the hardware STORE to expand this folder.

  5. In records resulting, find and click on the (+) sign next to the DESCRIPTION to expand this folder.

  6. In records resulting, locate and click the folder System .

  7. In the results displayed in the right window, locate the entries SystemBiosVersion andSystemBiosDate .

  8. The data in the SystemBiosVersion field contains the version of the BIOS of your motherboard. This field can also contain additional information such as the manufacturer of the chipset and the manufacturer of the BIOS.

  9. The data in the field SystemBiosDate contains the date in the calendar associated with the current version of the BIOS of your motherboard. The date of the BIOS can be useful to determine the current version of the BIOS from the motherboard manufacturer's Web site if the version is not clear in the area of SystemBiosVersion .

  10. Close the registry editor without making any changes.

  The BIOS settings: If the problem is with the settings in the BIOS, there are a couple of tweeks that allow you to optimize speed. When you turn on the computer, the BIOS (Basic Input/Output System) works a lot of tests on devices and configure the devices connected to your computer. If some parameters are not configured correctly, the startup of your PC speed can be reduced. Enter the BIOS setup and look for commands or settings that may not be correct. To be sure, run a Google search to be sure. Make sure that your first boot device is set on your main hard drive. Make sure that the logo of the motherboard display is turned off. And make sure that the Quick start quick start feature is activated.

  2 if your talking about startup as the loading process connection Windows for a full load of Windows in the Windows desktop, you may have a problem with too many programs to load with windows. In this case, you can easily check and disable all programs unwanted on startup with Windows, which can cause speed problems. You can do this:

  1. click "Start" and type "msconfig" in the search bar and press "enter."

  2. This will open "System Configuration utility".

  3. on the right side of the window, navigate to the tab "start".

  4. you will see a list of all programs to load with Windows. Here, you can decide what you do or you want to load with Windows. Some programs are required to load with Windows so that Windows load and run properly, so careful who you disable. If you are not sure if it's necessary for Windows, you can do a quick search on google to be sure. Search for the song titled "startup item". Copy and paste in Google and type "is"EXAMPLE"necessary to start Windows? You will usually find your answer quickly enough.

  Slow start could be caused by a couple of other reasons as well.

  1.  fragmented - registry Windows registry is the most indispensable of the Windows operating system. When he begins to have problems with the registry, the speed and functionality of Windows becomes considerably slower. I doubt that this could be the problem with your computer. It is possible, but it is new and that if you have applied heavy use in a short period of time, it is not the likely culprit. If it, however, it's worth a check. You can find a good registry cleaner online and give him a check.

  2 of virus or Spyware infections- once the infections on the computer, they can cause immediate damage to Windows features. If you have been online a lot, even with an anti-virus program, you may have a virus any. You must run a full scan just to be sure. You can also download the free version of Malwarebytes and run as well. It works very well and is quite powerful.

  Hope that this helped you and you have this problem is resolved. If you have any other questions, do not hesitate to me message. In fact, I have a model dv6 that I may be able to help in any future issues, you may have.

  Later,.

  kabwebdev

• Pavilion Dv6 - startup with beep continuous and wouldn't start without the CD inside windows

  Hi, so I was using my laptop one day, perfectly fine and I got sick, so I had it turned off for about 2 or 3 days. When I turned it back on it started constantly beep (1 beep long, but 1 beep followed by another instantly.

  Now I tried to reinstall Windows 7 and did, but she continued with the same problem. So I did a format on my drive, and did install a clean windows 7, it completed the installation currently and reset to move to the next step (now it does not start back to the desktop to completely finish doesn't stop beeping and freezing)

  I did a hard reboot and that did not work and I cleaned my air, nothing has worked to resolve this issue, and I did nothing in 2 or 3 days, he was off (before that day, I played last, it was working fine, and the day I turned it off everything I've done has been playing World of Warcraft don't not download/install something again)

  I opened the back and checked my memory was sitting on the right, and my HARD drive was inplace correctly (at the beginning when it was happening, it would not be in the office without the Windows 7 CD inside, now after I did a clean install, he's not going to the office without worrying)

  I read another post with similar problems and plan to go out 1 of my RAM sticks and just try to run with 1 in, and switching them and try to see if that helps, but I'll do that tomorrow as I worked on this thing for hours tonight, I've been on the Windows 7 forum get advice from someone here, but he gave a link to read and agreed I should post here also.

  My suspisions that if none of this works, it's my Proccessor, my Ram or my entire CPU, which in this case, I know not what to do to do or if it is worth fixing (Ram is easy, but the other two seems difficult and costly) for any help or advice as I can get from you guys would be greatly appreciated it's a HP Pavilion dv6 notebook.

  Edit: I managed to enter the office and my clean install of windows 7 in full, and I made a default reset in the BIOS, will return tomorrow with updates I have.

  Yes mate, I waiting since I posted a reply with HP staff.

  They are * beep * ing pathetic and I would never buy a HP anything ever, I will also say to all my friends and tell all my friends to tell their friends and so on and so forth, do not to do. I will also let any forum I post on the same and any game online that I play on the same thing.

  I gave up and will just buy a new DESKTOP PC, they work better and you can actually solve the material problems if it's graphics/CPU things, unlike a laptop.

  If I were to ever get a laptop once again, it will not be a HP, I'd rather have nothing then use a pathetic HP product ever, I would rather die then have to use it. Their technical support is pathetic, and I had nothing else problems with the HP laptop I've had since the beginning.

  Because of their pathetic excuse for a computer/laptop, I am behind in my studies and have perhaps missed a few projects that I'm not able to repeat. Thank you HP, you are now under the dirt for me.

• Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen

  I have a Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen with a blinking cursor. I ran all the tests start and everything this past. I tried all F8, F9, F10, F11, recovery options with no luck. I tried to start with the ERD Window 7 64 bit I created when I install the laptop. Nothing... I did it with all the disconnected device. No luck. I'm looking for all the options until I re - install windows. I started with the Windows 7 recovery DVD and it reads, but I cancelled the process because it will reformat the hard drive and I expect to work around all the hassels of having settings to reinstall the software, etc.. Any ideas would be welcome.

  Thanks for the reply. I already tried these steps. I created a bootable floppy that I can get the data on the hard drive and am trying to restore windows to the recpvery of the DVD system that I ordered with the computer. Thank you

• Pavilion dv6 stuck on starting windows screen

  Pavilion dv6 stuck on starting windows screen.

  Memory test: past

  Smart check: past

  DST short: FAILURE

  FAILURE ID: 60FTV0-5KS6SG-MFH14J-60UH03

  PRODUCT ID: LF1374AV

  Hard drive 1

  Help, please. I bought a new internal hard drive. But I have no recovery disks.

  Thank you

  XPJ

  Hello

  There are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option, if you came to laptop with Windows 7, you might consider is to create your own installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( must be the same version - i.e. Home Premium.) Professional etc. - initially supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is Digital River.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are from here.

  Best regards

  DP - K

• HP pavilion dv6-7045ez: impossible to start SSD

  Hello, I changed my old HDD to SSD (Kingston hyperX fury 240 GB, controller SandForce® SF-2281). I tried to install windows 7, windows 10 and debian, but I still have the same problem, during installation reboot to complete, it is impossible to boot from SSD. My opinion is that the controller is not compatible with my pc (HP pavilion dv6-7045ez).

  I found crucial.com who all say the ssd compatible with series dv6-7XXX (http://www.crucial.com/usa/en/compatible-upgrade-for/HP-Compaq/pavilion-dv6-7xxx-series-%28intel-ddr...). Can I trust her?

  Thanks in advance and sorry for my bad English, it is not my native language.

  Hi @Matoran,

  Welcome to the HP Forum! Thank you for becoming a member of the HP Forum. It's a place dynamite to get help from the community, to get suggestions and find what has worked for others. Because you have the best experience, here is a link for you to see, if you have concerns: first time here? Learn how to publish and more

  I understand that you have replaced your disk by a (fury of hyperX Kingston 240 GB) SSD and are able to install Windows, but not able to boot to it later. When I checked HP Pavilion dv6 Entertainment PC Maintenance and Service of Guide, the Kingston drive is not part of the recommended replacements. That doesn't mean it won't work, only that it is not tested and the result is unknown. It may or may not work.  You can find this informative document. HP Notebook PC - Solid State Hard Drives. Please see this post by @erico Re: how to upgrade your laptop to a SATA SSD 2.5 " because it may help.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem. "Think about scoring the post that solves your problem as" ","accept as Solution " to help other members of the community! To say thanks for the help, please click "Thumbs Up icon" below.

• HP pavilion dv6 did not start

  I have hp pavilion dv6 in 2 or 3 times in 2 years (fortunately only 2, but I'm still wondering) windows 7 could not load.

  I got error as there is no current startup disk. After 5 attempt, everything was fine, and the problem did not apear for several months

  Could this be bad sector of hd on the hard drive boot sector?

  surt10000xlt wrote:

  I have hp pavilion dv6 in 2 or 3 times in 2 years (fortunately only 2, but I'm still wondering) windows 7 could not load.

  I got error as there is no current startup disk. After 5 attempt, everything was fine, and the problem did not apear for several months

  Could this be bad sector of hd on the hard drive boot sector?

  It might be a bug in the BIOS. It could also be a loose contact between the hard disk and the connector. 2 x a year is nothing serious and I'd be worried about this...

• AMD high definition Audio Device not Plugged In (HP Pavilion dv6-6b09sa)

  I just started my laptop HP Pavilion dv6-6b09sa (running on Windows 7) to find that the sound icon is a red cross next to him and he claims that "no speakers or headphones are connected. In Control Panel, it says that the AMD high definition Audio Device is not plugged in.

  As far as I know, I did nothing to cause this.

  I have already tried:

  Restore the system to yesterday at 22:00.

  Instalation of a TDI driver on the HP website, but I don't know how to disable/change/remove the old driver. I am completely ignorant of these things.

  Please help, I am at a total loss.

  Hello

  You are welcome

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp54001-54500/sp54400.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Pavilion dv6 - 7943cl: win 10 anniversary Version rewrite Sony Movie Studio Platinum 12?

  Pavilion dv6 - 7043cl, after winning 10 anniversary update, stop now with "...". a no longer works... "message systematically when I run Sony Movie Studio Platinum 12;  the stop and the message arrive at the time when the application starts, the screen 'welcome. '  It makes the app totally useless - and 5 sessions with the support of Microsoft, 2 of them with level 2 technicians, have not found the answer after more than 12 hours of conversation and many relocations to win 10 and Movie Studio Platinum 12, among other complex of measures which have tried and failed.  The program worked perfectly before the big anniversary update, which is the only difference that I can find which could explain the new stop and the error message.  Support of MAGIX (who took over Sony Vegas software line recently) reported that they were not able to reproduce the problem, but have received a report of a person havaing to reinstall an earlier version of Windows 10 (before the anniversary version) to solve a problem installing with Movie Studio Platinum.  Microsoft has promised to help the resettlement of the earlier version of win 10, for which I have no control points, so I don't know if this will help. Question: it would be useful that I heard speak of someone else for the same problem with Movie Studio Platinum 12 and win 10 anniversary update (later after all 12 Sept.)    

  While is not a user of HP Pc (I'm on a Sony Vaio) I get the same problem after the big W10 update (from 2 or 3 days)

  I have 3 versions of Movie Studio Platinum version 10, 12 (32-bit) version and the version 12 (64-bit).

  None of them work anymore, they all freeze at the beginning.

  I have uninstalled/reinstalled without success.

  I found an old post (September 2015) in a forum related to a similar problem with Sony Vegas.

  The guy said he was set to start when Windows was working in pure 'safe mode '.

  So I tried it and it worked in my case for Film Studio.

  Maybe you can try it and report what happened.

  This being said, using Studio of cinema in 'safe mode' is just a way to test and may not be the way to operate.

  I hope that someone can quickly provide a solution, if not I will have a reason more (!) to go to Windows 7.

  My trust in Microsoft has droped with Windows10 (as opposed to W7) and the way things are now pushed and forced them to the client.