Pavilion Dv6t - 6 c 00: casing system

Similar Questions

• Pavilion dv6t-1200 Notebook System Board part number identification

  I am obliged by replacing the Board system/card mother for model Pavilion dv6t-1200 FV161AV (grilled, painful, do not ask :-().  The maintenance manual identifies 5 part numbers of possible candidates.  I eliminated three of claim, but I can't do it between two others to identify and order I need.  The two remaining candidates are listed as:

  511863-001 for models with graphical subsystem UMA memory

  518433-001 for models with UMA and GM47 chipset graphics card

  The processor is a Core2Duo T6400 (labeled AW80577T6400; 2.00/2M/800).  Two other large chips are the I/O chip that is an Intel AF82801IBM (L920NA92; SLB8Q ' 06 Taiwan) and chart/memory chipset called AC826M45; SLB94; EB920A510 and contains a logo Intel "i".  The I/O chip does not say much, but when google, seems to have associated the GM45 many including the GM47 is a member.  However, the AC826M45 seems to be a member of the Intel 845 chipset family.  The first suggests the 518433-001, but the latter suggests the 511863-001.  The FV161AV also seems to get associated with the 518433-001 in the vendor's documentation, but it varies.  Photos on the Internet have insufficient resolution to compare with the current motherboard to see who is right.

  Are there references that a person (for example at HP, perhaps) is that he or she can check to disambiguate on this?  I have included all the reference numbers as I could but if more are needed, please ask.  Any help would be welcome and thanks a lot in advance.

  Never mind!  I didn't know that there was a tag just below the memory.  All this time, it was under the memory.  I removed the memory and there it was:

  518433 001

  And I spent hours trying to understand some chips that did not exist on the Board of Directors.  These are the times you think that you are being so smart, but prove that you can be stupid enough.  Sorry for the inconvenience.

• Pavilion dv6t 7000: failure of the BIOS (Caps lock flashes twice a secone)

  My laptop model number is Pavilion dv6t 7000. In recent days, he had a problem. When I turned off my laptop and put it off, the next day I find that is not starting. A black screen, caps lock shift is blicking twice and f12 key is red (WIFI). Nothigs happen. Then, I searched and came to know that it is the failure of the bios. Then I tried some way and nothings worked. ATLAST when I remove the cmos battery it set again after 2 or 1 minute its starts fine. Then againg I turn off the computer and its power day following again the same problem. I was to solve this problem by removing cmos battery and put it again for 4 or 5 days. But today this tip does not work. I tried so many method like (Windows key + B), (byholding down the power button for 1 minute), (Flash UEFI) etc. to solve the problem of failure of the bios, nothing worked at all. What is the problem?  Is this really a failure of the bios? How can solve this problem? What is a dangerous problem? There the chances that my laptop is completely exhausted?

  Hello
  beep codes or led lights will Flash at the start of the system may indicate a hardware fault or BIOS you say you have tried all the troubleshooting steps
  
  I would like to run the hardware check to make sure it's all working please follow the guide below for instructions and report:
  
  http://support.HP.com/us-en/document/c03467259#AbT1
  
  Tests using UEFI diagnostics and run the quick test
  
  Thank you
  James

• w2207h monitor and Pavilion dv6t

  I have a new Pavilion dv6t Select laptop running WIndows 7 64 bit directly connected to a monitor in w2207h 22. It does not preserve the configuration of display resolution when I power it back up again.  Before he turned off had a resolution of 1680 x 1050 configuration, small icons, and other parameters, the first two being those that I am more interested in maintaining.

  I used to have a laptop no HP on a docking station connected to this same screen, the old laptop had no problem to recognize the resolution that I put up on the screen.  In fact, all I had to do was power up and presto.

  My new dv6t does not keep the display setting unless I do the following:

  (1) I opened the lid of the laptop and start it (if it is extended or not standby mode)

  (2) when he us operational, the monitor looks different (large icons, fuzzy fonts, lower resolution).

  (3) I use the F4 key to tell him that I have duplicate monitors.

  (4) the monitor then displays the appropriate resolution.

  If I don't tell her to do with the F4 monitor rest at the wrong resolution (for example (for the larger icons, fuzzy fonts, a lower resolution).

  I'm annnoyed enough I need to power my laptop by opening the cover when it is connected to the monitor, but now I have to do the extra step of the F4 to get the external screen is displayed correctly.

  Any ideas as to why the monitor does not display the appropriate resolution when I turn?

  Thank you!

  Yes.  It's good information. Thank you.

  Try using the latest version of the ATI video driver.  Don't forget to create a system restore point before updating the pilot arrived that something goes wrong.

  Look at the bottom of the laptop.  Do you see a sticky HP label with the model number?

• Pavilion DV6T - B 6, 00 QuadEdition: update my centrino N-1000 wireless card (do you want with bluetooth)

  I want to improve my wireless card, currently Intel Centrino N-1000, one with bluetooth. I saw a lot of people do and replace it with an Intel Advanced-N 6230 on different computers, but I am also aware that this can cause problems with my BIOS. If anyone can tell me if it works with my computer

  I have a HP Pavilion DV6T - B 6, 00 Quad Edition CTO Entertainment notebook PC with

  Core i7-2670QM CPU @ 2.20 GHz

  8 GB ram/memory

  Intel 3000 Graphics and AMD Radeon 6770M

  Running Windows 7 Professional, although I would not want to mess with dualboots and other operating system a few times

  I'm open to suggestions of any other wireless cards that have built in bluetooth because I hate the external bluetooth dongles.

  I have (of course the HP modified version of) Insyde H20 Bios F.1C

  I wasn't able to find the required information on the HP website for the life of me!
  If someone could help me out, I would be really grateful!

  Thank you

  -Nick

  nickhilgupta wrote:
  Do you happen to know which card will work?

  I don't think that any card WiFi dual band (5 GHz) will work. The best option for you is Intel 1030. It's the same chip as the 1000 but combo with bluetooth. Reference number: 631956-001. This part number is indicated in the manual as Intel 6230.

• Pavilion dv6t-2300: lack of basic systen device drivers

  Recently, I loaded Windows 10 replacing Windows 7 on my Pavilion DV6T 2300. Miss me him now four Base system device drivers.  They are listed under my list than other devices Device Manager.

  Hello:

  You need this driver for these devices...

  This package contains the driver for laptop models JMicron card reader supported and operating systems.

  File name: sp45010.exe

• Key Action WiFi does NOT work on Pavilion DV6t-7000

  I just got a new Pavilion DV6t-7000 Quad Edition laptop, and the first thing I did after I boot the system was to upgrade the operating system.  I have an MSDN subscription, so I've upgraded to Windows 8 Pro (RTM).  Everything is great... except for the WiFi button.  It does simply not to turn on or turn off the WiFi connection.

  It always shows a white LED while the WiFi is on, and pressing the button does nothing.  Other action keys may work... the brightness, mute audio, etc.  If I disable the WiFi in the network Panel, then the light turns red.  As if she recognizes the WiFi it's takes no action to actually turn on or turn it off.

  I updated the BIOS to the latest version, by the site of HP support for the 64 bit of Windows 8 OS, and I checked in the BIOS action keys are enabled.

  Can someone help me get this to work?

  Thank you!

  -Andrew

  Have you tested it before loading Windows 8 on it?
  
  Support of thing going before interview, that Windows 8 drivers are available or not, is to perform a recovery to the original embedded operating system.
  
  If it is a fault, the question would be present in the original Windows 7 operating system as well. I suspect that this is largely a software/driver problem.
  
  Also, I recommend the update to the BIOS before installing Windows 8. Windows 8 installations work differently with the BIOS that previous versions of Windows, so the end result would be different to reinstall Windows 8 from the version of the BIOS is different this time.
  
  However, I recommend he get back to Windows 7 in order to ensure all features is present.
  
  I know you probably don't want to go back in the recovery efforts there to Windows 7 and then put 8 on.
  
  By chance, you did the recovery disks for your system first? If this is not the case, they must be ordered from HP. You can try to use the Recovery Manager to create, but I don't know if it will work since the operating system has been modified.
  
  In all cases, whether it works or not with the original software, she shipped will help determine if it is a defect or not. More than likely, it is not and is only a matter of unfortunate compatibility with Windows 8.

• Pavilion dv6t - 6 c 00 A1U55AV: which USB 3.0 driver should I use

  I have a HP Pavilion dv6t - 6 c 00 A1U55AV who had a hard drive failure. After replacing the drive and the installation of the operating system, I was able to get all the resettled drivers, but I'm not sure that I installed the right driver USB 3. I installed the driver from Renesas (v 2.1.19.0), but I'm not sure it's the right one. I have a USB 3 AC wireless card that said I could get faster speeds if I have the plugin into a USB port on the SS (which I do). Should I use the Fresco Logic 3 USB driver instead?

  Thank you!

  Hello

  Your machine is a machine CTO so virtually only, you know what it is. Please try to look at its hardware id to see:

  http://www.WikiHow.com/find-hardware-ID

  Kind regards.

• Pavilion dv6t - 6 c 00: recovery/boot drive for a Pavilion DV6t - 6 c 00

  I have a dv6t - 6 c 00 with a ssd drive that out crapped on me.  I want to replace the SSD by another but cannot find my recovery disc I made when I bought it.  When I do a search of the web site, so I can order one, I find three different principles, but not sure it it could have been.  How can I choose the one he could have?  For the life of me I don't remember.

  • HP Pavilion dv6t - 6 c 00 CTO Entertainment Notebook PC
  • HP Pavilion dv6t - 6 c 00 CTO Quad Edition Entertainment Notebook PC
  • HP Pavilion dv6t - 6 c 00 CTO Select Edition Entertainment Notebook PC

  What are those found on the web site.  Anyone has an idea on what to look for on the computer that could tell me.  I watched all the tags inside and outside.

  Thank you

  Please try one of the following methods to locate the name or product number. DO NOT include your serial number.

  Figure: Example of label Service HP

  

  Figure: example of a window system HP information

  Figure: Example of product number HP Support Assistant

  

  Figure: Example of information system in the BIOS

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP Pavilion dv6t - 6 c 00 pilot CTO

  I apologize that I am reposting to a new thread.  but during my last attempt, someone gave me a link to get the driver out of this site and the installed link sm bus controller a lot of malware and no driver.  and the thread was cut.

  My operating system is windows 7 pro 64-bit.

  the drivers are supposed to be on this page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5214...

  but I can't identify the driver if its there and I already blew up an installation by I think installing the wrong driver.

  can someone direct me to a bus controller driver sm for the HP Pavilion dv6t - 6 c 00 CTO running windows 7 pro 64-bit?

  Thank you.

  Chipset Intel driver, that's what you need:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102010-1&cc=us&DLC=en&LC=en&OS=4063&product=5214352&sw_lang=

• HP Pavilion dv6t 6100 drivers

  Hello, I have a hp Pavilion dv6t 6100 CTO Quad edition, model number LM720AV with the graphics card Radeon HD 6700 M. I can't install the Intel HD Graphics driver.

  Recently, the tables of partition on my hard drive I've screwed up, and I was forced to erase the entire disk, recovery sector included, to reinstall windows 7 Home premium. I installed most of the drivers, but the driver "Intel high definition (HD) Graphics Driver" will not be installed because the installer nixes installation and indicates something of this order: "your computer does not meet the hardware requirements. I am sure that I download the right driver from the right pagel also, I download the driver even when I use the automatic detection feature drivers. I used the HP support assistant program, but the only driver it says that I need is the biometric scanner. Also, I installed the radeon drivers, but my card is declared invalid in the Device Manager. How could do to solve this?

  Thanks for your help.

  First of all, it's a great range of info that you put there for me; I wish that every person in forums answered that although you did right.

  In any case, I realized the solition, although I'm not sure the cause mechanics. I found an intel driver hd in file system of controllers of ata ida from the Device Manager and uninstalled, then did the same with drivers Radeon and finally reinstalled Catalyst. I guess it was something to do with installing stand-alone installation intel makes wonder why they are avalible for download in the pilot centre involving the user must install in the first place.

  Now, my excellent work of pilots as evidence by I can get a much better resolution, I can change the brightness and the whole system runs out cold by about 75% before installing the drivers.

  Thanks again for your help.

• Pavilion dv6t-3100 CTO: Windows 10 Bluetooth problem

  Greetings,

  I am trying to connect a bluetooth mouse for my HP Pavilion dv6t-3100 CTO Entertainment Notebook PC, its been 10 windows upgrade, I'm not sure if she actually had bluetooth on its previous operating system, the network adapter is "Intel Centrino Wireless-N 1000".

  Device Manager shows no bluetooth driver, after having gone through the hassle of downloading drivers and tried different methods, I started to wonder if my PC has made bluetooth or not! How will I know?

  Help, please

  Concerning

  Dajani

  Hi @MDajani,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6t-3100 CTO Entertainment Notebook and problems with the installation of Bluetooth. Your system did not come with Bluetooth.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• Pilot network Pavilion dv6t 1200 CTO Windows XP Realtek PCI-E

  Ahoy,.

  I am trying to download the driver for NETWORK card for my Pavilion dv6t 1200 CTO running Windows XP. I normally do by going here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3945150&LC=en&cc=us&DLC=en&lang=en&cc=us&submit=go%20%BB

  .. .clicking on the "Microsoft Windows XP" operating system and then to find the driver on the next page.

  However, it seems that clicking on "XP" takes me to the QuickLaunch driver download only. Am I the only one? I tried with different browsers.

  .. .quite frustrating.

  He got off the Realtek site.

• Install WD Black2 Dual Drive on a Pavilion dv6t-7000

  Hello

  I recently bought a new internal hard drive for my HP Pavilion dv6t-7000 CTO Entertainment Notebook PC and have some difficulties to install the drivers for it. I bought a Western Digital Black2 Dual disc, which is a hybrid disk with 120 GB SSD and 1 TB of HARD drive, but I can't access the 1 TB because the installer for WD drivers keeps returning an error code.

  After much digging, I found documentation of the WD site that States the particualr error I received was due to one) the SATA mode to RAID in the BIOS, or b) an Intel driver a RAID reporting configuration. I can not check the BIOS settings myself, because the tab in the BIOS for this is hidden and locked down due to the fact that I'm working on a laptop of HP (I found answers on the forums for models with slightly different laptop computer that reported the AHCI is the default SATA for HP laptops) (, but unable to verify for my particular model). However, I was able to find an Intel driver that can cause the problem in the Device Manager. It is listed under 'Storage controllers' and is called 'Intel(r) ICH8M-E/ICH9M-E SATA RAID Controller '. When you contact the service customer of WD, the representative has tried to help me change this default Microsoft Inbox Driver by following the process: (right click > update driver software > Browse my computer... > choose from the list of device drivers). Unfortunately, it was not useful because the afforementioned Intel driver is the only one available. I was a bit puzzled by that because I installed windows 7 from scratch, only adding the drivers from the HP site needed to establish a wireless connection to download the installation of WD software.

  So basically I'm looking for help in these areas: a) to determine the particular my laptop model SATA mode, b) to understand why I have the default Microsoft Inbox Driver, c) installation of the Microsoft Inbox Driver default value or a Variant that works with AHCI, and/or d) any other course of action I could take additional troubleshooting.

  Operating system: Windows 7 Home Premium 64-bit (installation costs)

  Laptop model: HP Pavilion dv6t-7000 CTO Entertainment Notebook PC

  Hard disk: Western Digital Black2 Dual Drive

  Error: A bad SATA mode in the BIOS or reported by the Intel driver

  Pilot suspect: Intel(r) ICH8M-E/ICH9M-E SATA RAID Controller

  Thank you kindly,

  Gorkycreator

  This problem has been resolved in a more precise message than I did in the operating system of your laptop and drivers support forum.

  Here is the link:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Windows-7-SATA-storage-driver-HP-Pavilion-DV6/TD-p/3970552

• HP Pavilion Dv6t 2000 CTO-two unknown device

  Hi all

  My laptop is HP pavilion Dv6t 2000 CTO, product no.: NQ615AV, run the Windows 7 64-bit operating system.

  It has two unknown device:

  1. PCI Express Root Complex
  2. Intel PM55 Express Chipset LPC Interface Controller - 3B 03

  Driver status: code 28.

  I haved installed driver: audio, graphics, Player cards, chipset (sp45629), quick launch.

  Please help me!

  Thank you very much.

  The Unit came with Windows 7, or is it upgraded to Windows 7? If you upgrade, what was a facility on the spot or own?
  It was like that out of the box, or was it a recent development? Nothing changed at all before that? It is strange for drivers just disappear.

  Have you tried to use the automatic update of the Intel driver? If not, go here and select it. It must analyze and find the drivers for the listed products that both are involved with the motherboard and chipset.