Pavilion dv7: error message!

Similar Questions

• HP pavilion dv7: error message when you use the recovery disk

  1Meilleure opportunity disc ok, 2 used and 74% and error message copy file fails to d:\preload\base17. WIM c:\RM\IMAGE\base17. WIM. What should I do now.

  It just sitting there so I'm out of it and then when I turn on again it says that it finished so I click done and then I got error missing Boot Manager.  You even insert the other disc driver and application recovery cd.  What should I do now.

  Thank you

  Update: test complete HDD to 100% test passed, smart check successful smart hard drive

• Pavilion DV7-4177: 4177 Pavilion DV7 Error Codes?

  I have a Pavilion DV7 4177 that won't start, beep 15 times. The Caps Lock Led flashes 3 times in repetitive cycles. At HP I guess 3 led flashing documents indicate memory error, but what is sound? The screen stays black and there is no other message. I'd appreciate any help.

  Thank you.

  The most common cause of a computer beep when starting is a module.3 of cowards or bad memory flashes is also indicative of the loose or bad memory module. While is is not terribly common for both to fail at the same time, it happens. If it were my laptop I would try a new memory module-even one only if the budget is a problem.

• Pavilion tx1410us - error messages from the BIOS disk Test

  My first post here so greetings and a happy new year to all.

  I have a Pavilion tx1410us who seems to have a hard drive problem. I have Vista (Partition 2 - 60 2 GB as/dev/sda2) and Ubuntu 10.10 64-bit (1-1 St 20 GB as/dev/sda1 Partition) on the first partition and am getting ATA DMA error messages 2 and on the console when running Ubuntu.

  When I had Vista on the first part of the disc I was getting a lot of errors on Vista.

  I ran check disk for bad blocks, but several seem to be coming.

  Last night I ran the test of the drive from the BIOS twice and twice got them the same "Test #2-07 failure" error message. The text is perhaps not quite correct, but the "#2-07" is certainly.

  Does anyone have a reference to what the BIOS messages mean?

  With the errors appear to come from the same part of the disk that would lead me to believe that it's the hard drive itself which is a failure, but I want to be sure that it is not the disk controller until I get a new hard drive.

  It was close in the past, but we are now very careful to use only on a surface hard and keep the vents unblocked so I think I can have escaped heating problems that seem to dog these machines.

  If someone is under Linux, you can install the monitor CPU cmdlets and the temperature of the system that can sit on your desktop and show you the temperatures constantly. Very useful. Interesting to see the speed at which the processor gets hot when editing or video processing.

  Thanks in advance for any help.

  Andy

  Hi Andy,.

  The error message definetely is hard even though I'm not sure what #2 refers to other it can tell the difference between the short and complete test.  This, and the fact that more unusable blocks are appearing constantly in all point to the failure of the HARD drive.

  Best wishes

  DP - K

• HP Pavilion p6204y Error Message - «Reboot and Select...» »

  I get this message only when I use my Western Digital WD7502AAEX 750 GB hard drive.  I have run chkdsk, WD, CrystalDisk diagnosis, whatever you can imagine.  I went into the BIOS and made sure that this drive is the first boot device.  When I install Windows 7, I use the ESC key to select the DVD player as a punctual start only to start the installation process.  I don't have this problem with my Western Digital WD20EARS 2 TB hard drive.  Is there something with the 750 GB drive I have to do (riders, etc.) to solve the problem with this error message?  I noticed in the BIOS that the hard drive controller mode has been defined RAID even if I don't than one hard drive in the computer at the same time (either the WD7502AAEX or the WD20EARS, but never both at the same time).  Is the default setting for my computer out of the factory RAID?  Four days after I installed the WD7502AAEX, I installed a new sound card of the computer.  Maybe if the RAID is not the default setting, the installation of the sound card has caused the setting to change?  The original in the PC hard disk had a score of 3.0 Gb/s transfer, while the news is 6.0.  This may cause the problem?  Help!

  Hello:

  The default setting for your PC would be the best RAID setting.

  There are no jumpers to change on the disc or the motherboard.

  I had the same problem with a HP dc7800 with the WD Caviar Black 500 6.0 GB/s drive and the Q35 chipset.

  I could install W7 on it, but on reboot, the BIOS reports no disk.

  I couldn't understand it.  I took the Seagate 1 TB 6.0 GBPS drive on my HP 8200 Elite and put it in the dc7800, and it worked perfectly fine since.

  I put the WD Caviar Black 500 GB drive in my 8200 Elite and it worked perfectly as well.

  I have to this day, no idea why this has happened.

  You can change the IDE BIOS and see if it works, but that will slightly degrade the performance of your hard drive.

  Paul

• "BIOS not ACPI Compliant" installation of Windows XP - Pavilion a850y error message

  Hello: My computer is a Pavilion a850y Pentium 4HT 3.8 MHz, just installed a new drive sata hard and tried to install Windows XP Home Edition. When starting the installation, just after the drivers loaded I received the following Message:

  A problem has been detected and Windows has shut down to prevent damage to your computer. If this is the first time, you've seen this stop error screen restart your computer. If the screen appears again, follow these steps...

  The Bios in this system is not fully ACPI-compatible. Contact your dealer or visit http:www,hardware-update.com for an updated BIOS. If you are unable to get a BIOS updated or the latest BIOS supplied by your vendor is not ACPI, you can turn off ACPI mode during the next mode installation. To do this, simply press the F7 key when you are prompted to install storage drivers. The system will not notify you that the user pressed F7 - he silently disable ACPI and allow you to continue the installation.

  Technical information: * STOP: 0x000000A5 (0 x 00000011, 0 x 00000004, 0x00000000, 0 x 0000000)

  Well, by pressing F7 just stopped the install again to a blue screen with "Windows Setup" on the screen.

  The upgrade of the only BIOS found on the HP site needs Windows running to install.

  My BIOS IS: BIOS Revision 3.10 11/12/04 Core version 08.00.10

  Department ID product # PU005AV MXP450048D S/N: PU005AV-PU008AV

  The only thing that was never updated on this computer's memory. The old hard drive disappeared. I tried another new hard drive with the same results. Installing Windows XP justs stops after loading the drivers.

  Anyone know where to find an update for the BIOS I can load from cd or floppy disk without Windows running?

  Any help would be appreciated!

  Thank you

  CBD

  I saw this error before installing XP after a memory upgrade on desktop computer Pavilion. At the time, I just deleted the extra memory and installed XP, then reinstalled the memory.

  Strange thing is I later installed XP again without any problem, leaving the additional memory.

• Pavilion dv7t: error message at startup

  By turning on the computer, after the signature, I get this message on the screen:

  "reader_sl.exe is missing.  Try to reinstall.    Missing MSVCP100.dll.

  What should I do?

  Hello

  To the Dungeon to start tapping F8 until you reach "advanced boot options" then using arrow keys, go down to "Safe Mode with command prompt" press ENTER, then once the command prompt opens type sfc/scannow and press enter NB: between sfc and / is a space...  Once the scan has completed type exit and press to enter.  Use CTRL + ALT + DELETE and reboot and see if Windows starts normally.

  Checkurtech

• Pavilion DV7 start error message - unable to start BTVSTACK. EXE, BTBIP. Missing DLL

  I have a Pavilion Dv7 (A3F83AV) running windows 7, 64 bit and recently to get the error message at startup telling BTVSTACK. EXE cannot start as long as BTBIP. DLL is missing.  I found that this has to do with the bluetooth, but I'm not sure which is better to corect this issue. Any ideas how to solve this problem?

  Thank you

  Hello:

  I want to try and reinstall the bluetooth driver and software for the wireless card model that your laptop uses the support page and the driver of your laptop.

  If it's an old dv7 notebook that has the HP bluetooth separate module, then install the HP software for your laptop. support and driver page of s.

• Pavilion DV7-6000 series. Error message at startup invalid product information

  I didn't know that my motherboard was bad from the factory.  On the first day, I was unable to do a full factory restore.  I always send to HP.  They sent me a motherboard and after installing it, I was able to do a full factory restore.  It was amazing... However, I now have this error message at startup.  Does that mean exactly?

  When I go into the BIOS, information on the system is xxxxxxx.  When I go to HP technical support.  The product name, serial number and product number is yyyyyyyy.  I know it's fake, why?

  Please don't tell me I have to send it after all.

  

  OK I won't tell you who, but you already know this is bad and you need to call HP. There is a special piece of software used for 'tattoo' Board of Directors. I have seen a few cases where they just give you a link to download and instructions on how make the 'tattoo '.

• How to solve an error "HDD 1 (301)" on my HP Pavilion Dv7 notebook PC

  HP Pavilion Dv7 Notebook Pc with OS! Windows 7 Home premium 64-bit.

  Error message:-hard drive 1 (301) - it sounds like there might be a malware

  Virus on it. 2012 on the laptop with me AVG Internet Security. I do not know

  The guys at the shop where I bought it says that I must not update the laptop

  software and drivers to many.

  Hard disk 1 (301) is a hard disk failure. This means that the hard drive needs to be replaced.
  
  You will need get a new hard drive and install it, then you will need to reinstall the Windows operating system using the HP recovery media. If you are in warranty, HP will send you replacement parts by your warranty conditions.
  
  If you are out of warranty, you will need to buy a replacement hard drive, and then call HP to order the specific recovery HP for your portable media.
  
  The number of American support is 1-800-474-6836.
  
  I'll be happy to answer any additional questions or provide additional information if you want to replace it yourself. It is not too difficult.

• Error 601 help asked for Pavilion dv7 - 3063cl

  Hello

  I have a Pavilion dv7 - 3063cl and anway there a 601 error. I replaced the internal battery (CMOS) and I thought everything would be fine, but at the start, I get the error 601. I looked around HP.com and other sites trying to figure out how to solve this problem, and he has been without success. When I plug in the AC adapter it will only be "plugged in, not not load." It was a difficult mess and it couldn't have come at a worse time, because I am a student with exams at the corner. One who reads my message and knows or has any suggestions is appreciated by speed. If you need more information, I will provide. Thank you.

  On a side note, I did download and install the latest BIOS but I don't know if I need to do something more in this regard. I'm tech-savvy than the average, but I might have forgotten some minor details. Again, thank you.

  MC.

  You need to replace the main battery.

  I'm working on a G60 who has the same problem.

  Battery HP (601) alert.

  Just replaced battery gone error.

  Good luck.

  REO

• Fan (90 b) system error / HP Pavilion dv7-4060us

  Hello. I have a Pavilion dv7-4060us for laptop, Windows 7 Home Premium, 64 - bit. I had an overheating problem not too long ago which caused my notebook to close on its own. I bought a cooling package to help with the overheating, which helped. But now, whenever I boot, it gives me a black screen, read "operating system has found that a cooling fan has stopped working" or something similar. The error code was 'System fan (90 b)'. How can I get rid of this error message? Post here or join my email [email protected]. Thank you.

  Since you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://goo.GL/kQDB

  Take care
  Sean S

• HP Pavilion dv7-1245 ca battery internal error 601. How can I change the battery

  Hello

  My laptop is a Pavilion dv7-1245.

  It shuts down its own, and after a few minutes, she lights up and displays this error message when starting:

  HP battery alert-

  ... your internal battery needs to be replaced...

  Internal battery (601)

  Sometimes, I need to start my car.

  I bought it two years ago. I just program the hard drive a week ago, causing the original one crashed badly.

  Could you please tell me what specific battery should I buy?

  I read in another post for the Pavilion dv6 you just need to keep it pluged to replace intyernal battery like in a flaslight. Is it OK for my model?

  I would also like to know if the problem to cut down on its own, it is linked with the battery warning or if it is another question.

  Please notify. I use my laptop to work ar House, and I can't afford to buy a new one now.

  Thanks in advance

  Soledad

  Montreal, Canada

  Hello

  You just need to replace the internal battery.

  Here is the maintenance and Service of Guide for your specific model.

  On page 54-55 you will find instructions how to remove the battery and how to install the battery.

  Here you can buy a new one.

• HP Pavilion 22xw 21.5 inch IPS: HP Pavilion 22xw 21.5 "IPS LED backlit monitor products: error message driver J7Y67AA #ABA

  I got a message from my assistant HP that there are two updates that need to be downloaded. The first was for AMD GFX Driver UMA Win10 64-bit YANICK
  
  I downloaded and installed, but now when I go into the settings, it is said "Screen backlight HP Pavilion driver error 22xw"

  However, my monitor seems to work very well? Don't know what to do with this message
  
  Thank you for any input!
  Susan untechie computer user

  Thank you very much for your answer, I'll put this link!
  However, that night that my computer has made an update of windows 10 and apparently solved the problem, this error message has disappeared... Now, that's service, lol.

• HP Pavilion Dv7: No boot device error * HELP *.

  I have an old Pavilion dv7 laptop that does not start because he apparently didn't quite "bootable devices." I looked this error online and once I opened it upward, I discovered that whoever worked on the last laptop didn't turn screws from the hard drive hard drives seem to be correctly connected but my question is, is this the problem?

  Any help would be appreciated!

  Full of error: (Black screen)

  Realtek PKU Express Gigabit Ethernet controller series v2.26 (090219)

  PXE - E61: Media test failure, check cable of

  PXE - MOF: Exit PXE ROM.

  No boot device - insert boot disk and press any key

  ~ Carbender

  Carbender wrote:
  

  I have an old Pavilion dv7 laptop that does not start because he apparently didn't quite "bootable devices." I looked this error online and once I opened it upward, I discovered that whoever worked on the last laptop didn't turn screws from the hard drive hard drives seem to be correctly connected but my question is, is this the problem?

  Any help would be appreciated!

  Full of error: (Black screen)

  Realtek PKU Express Gigabit Ethernet controller series v2.26 (090219)

  PXE - E61: Media test failure, check cable of

  PXE - MOF: Exit PXE ROM.

  No boot device - insert boot disk and press any key

  ~ Carbender

  First, take out the HARD drive and put the screws to the right to maintain and replace the HARD drive and reboot again. It could be that the missing screws causing the HARD drive vibrates too and make the heads and causing the HARD drive having problems.