Pavilion dv7: I replaced the 640 GB HD failure with a 1 TB hard drive.

Similar Questions

• How to start the CD-ROM on 520CDT with no OS on hard drive

  Hello
  I formatted the drive on this laptop Tecra 520CDT (old, I know, but I have a use for it), only to find out that it doesn't seem to boot from the CD-Rom drive. I have more interchangeable floppy drive. Suggestions as to how I could force to start the CD-ROM (I changed the boot order in the Bios) floppy Windows or something else?
  Until I do, I can't reinstall an operating system.
  Otherwise, no matter how old external floppy drive works, and if what is port? It starts from parallel port?
  Thank you
  Jonathan

  Hello

  Maybe you can try to update BIOS. It's the old machine and it is not easy to say what may be the best solution for your problem. Anyway, with the new BIOS version maybe you have more success.

• Pavilion dv 9500: replace the HDD with SSD HP Pavilion dv9500

  I want to improve my HP Pavilion dv9500 by replacing the HARD original with an SSD drive. Is that possible and Yes are there no specification of SSD and an adapter must?

  PaulB5 wrote:

  I want to improve my HP Pavilion dv9500 by replacing the HARD original with an SSD drive. Is that possible and Yes are there no specification of SSD and an adapter must?

  They should fit you will have to climb on your HARD drive cage if there is an and that you may need a spacer inserted as some SSDS have a spacer for the filling of vacuum.

• Can we replace the primary codec CTS 3000 with CTS 1000 codec

  Hi all

  Please correct me if I'm wrong.

  Physically CTS 1000 codec and CTS 3000 Primay Codec is the same air, I would like to know what is the difference between the two codecs.

  Suppose if I replace the main codec CTS 3000 with codec CTS 1000 it'll work?

  The difference is only between the firmware... ??

  If I try to download the firmware CTS 3000 in CTS 1000 codec does?

  Also add codec CTS 1000 in CUCM as Codec CTS 3000?

  Kind regards

  Nikhil Jayan

  Nikhil,

  Are the only thing you need to know about 2 codecs GEN 1 or GEN 2. On the GEN 1 all the microphones connect to the primary codec. On the Gen 2 microphones connect through the audion expansion area. You can see the difference on the codecs on the Gen 2, you can see 1 connection for the Center microphone and a connector square for the cable to the AEB.

  Other codecs are exactly the same. Endpoint gets its configuration file in Communications Manager. So once go you MAC address and restart the endpoint it will go the new configuration file. If you use a CTS Manager, you will need to go into the Application user in the CUCM and move the MAC address of available for controlled devices. You will then need to make a discovery of the room in the CTS - Man.

  The firware for both codecs are the same.

  I hope this helps out.

  JD King

• Replace the message "No Items Found" with Javascript

  On this page http://www.sedonamagoretreat.org/test in the second box "Program Dates" in the sidebar on the right, I'm trying to set up a script that I found to replace the "No items found" message with a custom html file.

  The javascript is here: http://www.sedonamagoretreat.org/js/no-items-found.js and here is the html file that is used to replace the message: http://www.sedonamagoretreat.org/prog-dates-alternate-content.

  I'm sure this is an easy fix and I'm just on something... suggestions to get this script working are welcome - thanks!

  Linda

  Well Yes, it's easy to fix.  You are the javascript file requires jQuery is working properly and in the HEAD of your page or the page template you load the '/js/no-items-found.js' before calling jQuery.  Just move this SCRIPT reference in your page or your page template to the bottom of line to make AFTER the dismissal of javascript jQuery.

  Once correct you this error, it seems that the script is a not can prepare to deal with multiple instances of your web applications list.

• replace the B Apps Tier instance with instance and A level apps

  Hello
  I have:
  
  Instance A
  Apps Version: R12 (12.0.6)
  IP:10.1.1.173
  Host name: oratest
  Installation: Unique and single-user node
  
  Instance B
  Apps Version: R12 (12.0.6)
  IP 10.1.1.173
  Host name: oraapps
  Installation: Monkey and single user node
  
  
  I want to replace the Apps Tier B instance with instance and A level apps.
  
  Is this possible?
  Please suggest.
  
  
  Concerning
  ANUP

  ANUP,

  I want to replace the Apps Tier B instance with instance and A level apps.

  As mentioned above, helios so the patches on both instances group level is not the same, then you cannot replace/clone the layer application only, and you will need to make a full clone of database/application as hungry_dba mentioned above.

  Kind regards
  Hussein

• Thread for the diagnostic tool of problem-HP errorcode BIOHD-8 (hard drive)

  For my HP-Pavilion - model P6367c

  I also put the BIOHD-8 error Code.

  Test: WDC WD10EADS-65M2B0 (wd-wmav51126570)

  suggestion: save your data

  suggestion to contact the HP Support

  When I do the recovery PC Statup screen, it works only for hours, or even days... occaisonally restart itself.   It has been 4 days.   I don't know I'm done on this.    As in some of the previous discussions, the restore points that I know have been created, displays none not being created.   I made a backup, but through Norton.   Not sure how the backup will help until I get my computer runnign again.

  What should I do?

  If she needs takign apart my changing computer hard drives... forget it... I've done enough of that in my life.  Rather spend time with my children.

  Help, please... It has all my photos and my finances on it.

  Thanks, Greg

  Greg, welcome to the forum.

  The BIOHD-8 error Code tells you that your hard drive has failed.  Therefore, you will need to replace it before you can restore your computer.  I hope that you have a backup of your personal data.

  Here's a guide that will help you understand the error code.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• Replace T420s with a new SSD HARD drive

  Hello

  I wonderd if it is possible to replace with a new SSD HARD drive, while putting the HARD drive in the Bay of Ultra-slot.

  And if so, what SSD model should I buy, and how do I transfer the operating system and the data for the SSD?

  This SSD model will be compatible?

  Corsair neutron Series 120 GB SSD Sata III MLC 2.5 inches Retail

  Thank you very much

  Guy

  Yes, what you are proposing is quite feasible. You will need an adapter Ultabay to organize your HARD drive in the Ultrabay housing on your system. These are available from Lenovo, but are relatively expensive. You can get a much less expensive (~ $ 10) a compatible version on eBay. It is not as well finished as the real issue, but it works well.

  The best way to transfer everything on your SSD is "clone" of your HARD disk using a software as Acronis True Image. If your current HARD drive is made by Western Digital or Seagate you can get a free copy of Acronis on their Web site. Put the SSD in the SATA drive Bay and the HARD disk in the UtlraBay. Set the T520 to start from the Ultrabay, install/run Acronis here and make a clone for the SSD. Then boot from the SSD and you'll be all set.

  With respect to the SSD, many people here have had good success with Crucial M4, 520 Intel and Samsung 830. I guess that Corsair works perfectly as well, but I didn't know all messages from people here who have done so.

  Before ordering a SSD confirm if the HARD drive is 7 mm or 9.5 mm thick. Then order the same thickness SSD. This way, you will be able to use the metal rails caddy and rubber who now hold your HARD drive to contain the SSD.

• My MBP is showing a "Remote Disc" in the list of devices. It's not a hard drive.

  My MBP is showing a "Remote Disc" in the list of devices. It's not a hard drive. So where did it come from? I 'get info' on this subject, but it doesn't tell me a thing.  He sees the disk drives elsewhere in my house? It's to see my iPhone as a remote disc? The photo with him is a DVD or CD gold. It drives me crazy.  I am running OSX Sierra.

  This has been on the Mac for a while now... Here is a link that can better describe it.

  Use the CD or DVD drive from another computer with your Mac - Apple Support

• When I open Firefox I overload my profile. I uninstalled it and reinstalled on my external hard drive. When I open Firefox it recreated the ideas of folderAny how do I change the setting so that this folder is in my hard drive

  most of the information is in my question. My profile on my home computer is limited. I would like to set up Firefox so it puts the profile and any other information on my external hard drive. I tried all of the optional parameters, but have not been able to solve the problem

  You can use the Profile Manager to create a new profile, then click on the button choose to set the location of this profile on the other disk. You must specify a new (empty) location for this profile because Firefox uses the specified location and does not create a new folder. This allows you to specify an already existing profile on this player and Firefox it will use.

  See the location of the custom profile > Firefox Thunderbird and SeaMonkey 2

  • http://KB.mozillazine.org/Profile_Manager#Creating_a_new_profile

• How to change the Satellite L670D-103 using new SSD 80 GB HARD drive?

  Hello

  I have a Satellite L670D-103 with a 320 GB HARD drive running at 5400 RPM which is too slow for me.

  So I plan to change this factory by a new SSD HDD to increase the performance of the overall system :)

  But as the SSD are expensive, I have only a 80 GB SSD.

  I built the recovery on a USB media and I want to use it to restore my system to the new SSD (I previously did the space needed to ensure that all data can be stored on my new SSD 80 GB space; p)

  Retrieving SSD partitioning new procedure is done without error, but when copying image to restore data to freshly created the partition, one not enough space error stop the process!

  It seems that the recovery procedure is possible on a hard drive that is equal or superior to the original size of the disk (320 gb).

  So, how can I restore mysystem on my new SSD?

  Thank you
  Stéphane.

  > It seems that the recovery procedure is possible on a hard drive that is equal or superior to the original size of the disk (320 gb)

  To my knowledge, you have different recovery options:

  (* 1) * recovery of factory default software

  (a) recovery to out of box state
  (b) recovery without changing the HARD drive partitions
  (c) recovery of a custom size partition

  (* 2) * "erase the HARD drive.

  I think that if you choose factory default software recovery of-> recovery to out of box state then the recovery would create exactly the same size of partition on the new SSD which were available on the 320 GB HARD drive.
  I think this might be the reason why you have received this message.

  Perhaps you need to choose the 3rd option Recovery on a custom size partition

  What do you think?

• How can I transfer video files to the library in windows media player for an external hard drive

  How can I transfer video files to the library in windows media player for an external hard drive. My os is Windows XP Home Edition and I use wmp 11.

  You have to locate the files on your internal hard drive, using the Explorer, then drag and drop them on the hard drive.  If you don't know where they are on your hard drive, right click on the video file in the library and choose the location of the opened file.

• laptop is running out of space so I need to transfer the games mainly from my laptop on an external hard drive. What are the steps to achieve this?

  original title: can you help me?

  My laptop is running out of space so I need to transfer the games mainly from my laptop on an external hard drive.   What are the steps to achieve this?

  My laptop is running out of space so I need to transfer the games mainly from my laptop on an external hard drive.   What are the steps to achieve this?

  Go to computer stores, get an external hard drive of 1 TB capacity. Ask for one that you can just simply copy and paste to transfer files.

  I have a. Digital WD Elements. 1 TB vapacity. It works very well. No action of fancy, complicated to transfer, just copy and paste or drag and drop files.

  I also use it to make Sysytem Image backup.

• The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive.

  Original title: USB problem

  I use windows 7 as operating system. I have problem when I insert USB devices as pan tie drive, mobile, reader of cards ect. USB port of my PC. The problem is the USB Devices folder shown as a shortcut so I can not Capy of data in the folder with other devices or hard drive. so please suggest me what I can do?

  Hello

  Start Windows Explorer, and then see if there is a drive letter assigned for access to the
  drive. If this is not the case, check if the disc is shown in disk management.

  1. Open Computer Management by clicking on the button start , by clicking on Control Panel, system and security, clicking Administrative Tools and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. In the left pane, under storage, click Disk Management.

  If there has made a right click option - assign a drive letter for you can use Windows
  Explorer to copy files.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I said that I need the permission of the administrator (I am the administrator) to copy a file to one external hard drive to another.

  I said that I need the permission of the administrator (I am the administrator) to copy a file to one external hard drive to another. I used the same computer and peripheral for the past two years with no problems until today when I opened upward after being away on vacation. I use Windows 7. I'd appreciate any help out there.

  BHA

  Original title: the administrator permission

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-open-a-file-if-i-get-an-access-denied-message

  Troubleshoot "access denied" when opening files or folders [good for Win7, too]

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Windows 7: access denied - WHY?

  http://www.SevenForums.com/general-discussion/19745-access-denied-why.html