How to start the CD-ROM on 520CDT with no OS on hard drive

Similar Questions

• How to change the Satellite L670D-103 using new SSD 80 GB HARD drive?

  Hello

  I have a Satellite L670D-103 with a 320 GB HARD drive running at 5400 RPM which is too slow for me.

  So I plan to change this factory by a new SSD HDD to increase the performance of the overall system :)

  But as the SSD are expensive, I have only a 80 GB SSD.

  I built the recovery on a USB media and I want to use it to restore my system to the new SSD (I previously did the space needed to ensure that all data can be stored on my new SSD 80 GB space; p)

  Retrieving SSD partitioning new procedure is done without error, but when copying image to restore data to freshly created the partition, one not enough space error stop the process!

  It seems that the recovery procedure is possible on a hard drive that is equal or superior to the original size of the disk (320 gb).

  So, how can I restore mysystem on my new SSD?

  Thank you
  Stéphane.

  > It seems that the recovery procedure is possible on a hard drive that is equal or superior to the original size of the disk (320 gb)

  To my knowledge, you have different recovery options:

  (* 1) * recovery of factory default software

  (a) recovery to out of box state
  (b) recovery without changing the HARD drive partitions
  (c) recovery of a custom size partition

  (* 2) * "erase the HARD drive.

  I think that if you choose factory default software recovery of-> recovery to out of box state then the recovery would create exactly the same size of partition on the new SSD which were available on the 320 GB HARD drive.
  I think this might be the reason why you have received this message.

  Perhaps you need to choose the 3rd option Recovery on a custom size partition

  What do you think?

• How to wear the Vista/Toshiba Satellite Pro A200 software after upgrade HARD drive

  Hello.

  Have ordered a Seagate Momentus 7200.02 200 GB SATA-300 7200 RPM 16 MB 2.5 "for my Satellite Pro A200GE - 26. Toshiba slow disk with this laptop ships is simply not fast enough so it is replaced.

  My question is this: can I use the recovery disc of the DVD came with my laptop to reinstall Vista and all the Toshiba drivers on this new album?

  If this is not the case-how can I do?

  If I can do it - could you give me a checklist of things to do?
  Are several factors I need to get used to exist on the recovery disk?

  I ask this because I know how to do this on a PC with the Original OS disc, but I was horrified when my laptop has been delivered and no original OS disk - I think it's very bad for any help would be accepted with gratitude.

  Thank you in advance,

  Kenny.

  Hello

  You should not worry about the whole procedure, just install the HARD drive, put the recovery CD in your CD/DVD drive, press F12 and start with your CD drive or just press 'C' (which automatically inserted CD, boots).

  The recovery is not limited to a specific HARD disk, it automatically adjusts the size of the partition and install EVERTHING on your disk as a preinstalled OS shipped directly from the factory. Don t you need some additional drivers or software, the only thing you need to do is to copy your personal data on the system drive and customize your windows.

  It is the intention of recovery media: put it in and it does everything by itself.

  That's all. :)

  See you soon

• How to install the version full of windows 7 on a new hard drive

  I got a new hard drive and install a full version of windows 7 on it, what I need to do something special or just install the new hard drive, then install windows 7

  Just plug the hard disk, insert the installation DVD and boot from the DVD to start the installation.

  Detailed information:

  To install Windows 7 on a computer without an operating system

  To do this, you will need to start, or boot, your computer using the Windows 7 installation disc or a USB flash drive.

  1. Turn on your computer, insert the Windows 7 installation disc or a USB flash drive and then turn off your computer.

  2. Restart your computer.

  3. Press a key when prompted and then follow the instructions that appear.

  4. In the page install Windows, enter your language and other preferences, and then click Next.

     If the page install Windows does not appear and you are not prompted to press a key, you may need to change some settings of the system. To learn how, see start your computer from a disk to install Windows 7 or USB flash drive .

  5. On the Please read the license terms page, if you agree to the terms of the license, click on I accept the terms of the license and then click Next.

  6. On the type of installation do you want? page, click Custom.

  7. On the place where you want to install Windows? page, select the partition you want to install Windows 7 on or click unallocated space if no partitions are listed, and then click Next.

     If a dialog box appears saying that Windows can create additional partitions for system files, or the partition you have chosen may contain recovery files or other types of files from the manufacturer of your computer, click OK.

  8. Follow the instructions to complete the installation of Windows 7, include the name of your computer and setting up an initial user account.

  Notes

  • If you use the upgraded version of Windows 7 on a computer without an operating system installed, you can leave the box empty product keys during installation. The updated version requires Windows XP or Windows Vista be installed on the computer to activate Windows 7. To activate Windows 7, visit the Web site of Support technique Microsoft . For more information, see Windows 7 activation error: invalid product key and Windows 7 activation error: 0xC004F061 .

  • You may need to update the drivers after installing Windows 7. To do this, click the Start button, click all programs, and then click Windows Update. If Windows Update doesn't have the driver you need, see update a hardware driver that is not working properly , or go to the Compatibility Center 7"" href = "http://go.microsoft.com/fwlink/?LinkId=160679" title = "Go to the www.microsoft.com and search for"Windows 7 Compatibility Center"" > Windows 7 Compatibility Center

  Web page.
  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• How to download the desktop app and other programs on a different hard drive?

  Hey, I have 2 hard drives, my main hard drive is full, and I want to install apps on another hard disk that has more space in it.

  In the installation process, I can't choose which hard drive to install. How can I change the location of the apps?

  Hi Noor,

  You can change the installation location through the desktop Adobe CC application.

  Click the gear on the top icon right > select Preferences > section under the creative cloud, you can set the installation location.

  Kind regards

  Sheena

• Pavilion dv7: I replaced the 640 GB HD failure with a 1 TB hard drive.

  "Extend volume" option is grayed out in disk management, so I can't access the 335,34 GB of unallocated space. How to extend the C: partition to use this space?

  You can post a screenshot of disk management? Will there be a partition between the end of the C: and the beginning of the unallocated space? If so, disk management is not powerful enough to do the job and you will have to use a tool to partition Linux gparted or Acronis, Commander of the Partition to move the intervener score as a result of the right, and then migrate C:

• I can't understand how to start the calendar after the migration.

  I can't understand how to start the calendar of lighting. Documentation, said he will start automatically, but it doesn't.

  I reinstalled Thunderbird with the XPI in the folder with the exec install and now it works. Install documentation is poor.

• Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  Hi, after you install Minecraft in my iMac, I get this message: "cannot start minecraft, if you run from a dmg, please drag applications and try again. I Don t know how to start the game. Thank you

  So what measures through 'install '?

• How to remove the DVD ROM on the Satellite L300D 242?

  Hello

  my laptop (* Toshiba L300D 242 *) DVD ROM has been damaged and I have acquired a new and now I can not figure out how to remove my old DVD ROM and replace it with a new one... Please help me understand how to remove the old and replace it with a new one...
  Thank you...
  E-mail: [[email protected]]

  Agree with Feliks the ODD is secured by a screw hidden in the HARD drive Bay.
  So the HARD drive Bay cover must be removed to access this screw procedure is not really difficult, so you should be able to remove it easily.

• How to start the assessment without a device

  Hello

  I downloaded the evaluation version.

  How to start the assessment without a device?

  Thank you

  DV63

  Hi DV63,

  Welcome to the Forums EITHER!

  If you downloaded an evaluation version of LabVIEW your 30 day trial must begin immediately after being invited to enter a serial number. You can choose not to enter a serial number and this will begin your trial period. I recommend that you install OR-DAQmx device drivers; It is a software that allows you to communicate with the hardware from National Instruments DAQ. However, this facility will be particularly useful because it allows you to simulate an Instrument with the measurement and Automation Explorer (MAX); This means that you can immediately start the signals in LabVIEW.

• When I start the computer, my computer opens with a music (sound) very short and when I stopped, it closes with a short, loud music, causing disturbances to third parties. How to remove this noise?

  When I start the computer, my computer opens with a music (sound) very short and when I stopped, it closes with a short, loud music, causing disturbances to third parties. How to remove this noise?

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Step 1: Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. Click Start and then click Run.
  b. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
  d. When you are prompted, click on restart to restart the computer.

  Step 2: Change or disable startup Windows and exit Windows sound and check.

  a. click Start, click Run, type mmsys.cpland then click OK.
  b. click the sounds tab.
  c. under program events, click Start.
  d. in the sounds box, click (none), or different sound, and then click OK.
  e. click exit Windows.
  f. in the sounds box, click (none), or different sound, and then click OK.

• I tried to turn on windows defender and he said that there is an error. It will not turn back. Anyone with information would be a great help. How to start the service manually?

  I discovered that Windows defender is disabled. I tried to turn it back on, and he said that there is an error. How can I turn it back on? Anyone with information would be a great help. How to start the service manually? __

  Hello
   
   
  could a. you give us the exact error that you are experiencing?
  (b) also mention the error code, as well if it is listed.
  have c. you installed other software security like McAfee, Microsoft Security Essentials etc. ?
   
  
  Let us check if the service is set to automatic.
  1. Click Start-> run and type services.msc
  2. now, locate the service named Windows Defender,
  3. double click to bring up the Properties window.
  4. set the startup type to automatic
  5. click on apply, and then click Start
  6. click OK, and then click Close window Services/Local
   
   
  We hope to hear from you soon.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to start the database using CRS to start the database instance

  Dear Experts,

  How to start the database using CRS to start the database instance

  As a solution: remove the write permission on the/etc/oratab user database to prevent update to arrive.

  There is no harmful effects known to CRS / RDBMS operation if this workaround solution is used. This has been discussed in Bug 13028802.

• How to start the database and servers after the installation of the Webcenter JSK Portal

  Hello

  I finally installed the portal WebCenter using JSK, after it turned off the machine, I don't know how to start the database or server, I need to set the environment variables? create the oracletab file? or is it a file .sh to start the database and servers?

  Any help will be great!

  Best regards!

  Thanks Françoise-Oracle for your response

  As you say, I need to go to /WCPortal_JSK_Linux.x 86-64/linux64, I found all the scripts that I needed to start or stop a server or database. But more especially if you run evertything, (I did) you just need to run the de./startup.sh script and wait, he'll run, but take some time.

  Best regards!

• How to start the agent on the database host computer that is being monitored

  Hi all
  I installed OEM 11.2.1.0. I stopped getting alerts after the 1 server node is restarted. I followed RAC database.
  When I checked the status of the host agent I get the following output
  [oracle@rs1pre91dvdba01 bin] $ pwd
  / u01/app/Oracle/agent11g/bin
  State of the agent emctl [oracle@rs1pre91dvdba01 bin] $
  ORACLE_UNQNAME environment variable not defined. Please install ORACLE_UNQNAME in unique name of database.
  [oracle@rs1pre91dvdba01 bin] $ export ORACLE_UNQNAME = MDM11
  State of the agent emctl [oracle@rs1pre91dvdba01 bin] $
  The MA Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/rs1pre91dvdba01_MDM11 not found.
  [oracle@rs1pre91dvdba01 bin] $
  
  And even on node 2
  [oracle@rs1pre91dvdba02 bin] $ pwd
  / u01/app/Oracle/agent11g/bin
  [oracle@rs1pre91dvdba02 bin] $ export ORACLE_UNQNAME = MDM12
  State of the agent emctl [oracle@rs1pre91dvdba02 bin] $
  The MA Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/rs1pre91dvdba02_MDM12 not found.
  
  Please can I know how to start the agent on the nodes and also auto how the boot process of the agent on the server restart
  
  Thank you.

  I assume that you have installed your agent in the directory

  / u01/app/Oracle/agent11g/bin

  If this is correct then run the following commands

  Export ORACLE_HOME = / u01/app/oracle/agent11g /.
  export LD_LIBRARY_PATH = / u01/app/oracle/agent11g/lib

  PATH = $ORACLE_HOME/bin:. : $PATH; export PATH

  As a matter of fact, you need to set the environment variables separate for the agent to execute commands
  which are related to the agent. These distinct environment must be set correctly to ensure that the
  commands can be found in the appropriate directories...

  Then, run the status command emctl agent...