Pavilion dv7t 6000 CTO

Similar Questions

• Example: Pavilion dv7t-4100: recovery of hp pavilion dv7t-4100 cto

  Hey CV, where I can find or buy a software recovery and restore for my hp pavilion dv7t-4100 cto or is there any software available to download here restoration and recovery. ? Thank you...

  from the Philippines.

  NeoJohn wrote:
  

  Can I ask you... this disk of software can perform a full recovery of the system... ?

  Recovery Kit for Windows 7 64 b 631032-001 for HP Pavilion Entertainment PC portable model number dv7t-4100
  Operating system: Windows 7 64B + extra 2
  Number of disks: 2 DVD + 1 additional disk

  Did you ask them? Which looks like this but if you do not ask to be sure so we on the user forum can do for you.

• 2nd hard drive for HP Pavilion dv7t-4000 CTO Notebook - what do I need?

  Hi, I have the HP Pavilion dv7t-4000 CTO Select Edition Entertainment Notebook (product # WV703AV). It can accommodate two hard disks but only came with one. What would need to be able to install the second hard drive? I need just a connecting cable or I also need to caddy or kit?

  Also, would I get a solid state? My laptop that would support or should I just use regular?

  Currently, I am on Windows 7 64-bit. I have a 500 GB hd (which came to be partitioned with hp tools/restoration).

  Help with what I would need to a conventional hard drive or ssd would be greatly appreciated. I tried to look through messages of others first, but could not find anything specific to my model. Thanks for your time!

  Hello:

  The only place I know where you can get a 2nd hard drive kit is that provider.

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&products_id=345

  Your laptop should be able to work with an SSD, but I can't guarantee it.

  I don't really see any point in adding an SSD unless you make the main hard drive, and to do this, you must get an SSD of the same size as the original 500 GB hard drive to use the recovery discs to reinstall the operating system.

  Most people get smaller SSD and they use the W7 product key to activate a simple installation of W7.

  If you can read all 25 characters of your product key for windows 7, you can do your own installation media and allows to install Windows on a smaller than 500 GB SSD.

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a 4 GB flash drive to use the USB compilation method.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

• Pavilion dv7t-6100-cto-quad: I can't get the new drivers on the hp support site

  I have restored my ssd from disks that I made the computer when I bought it and I did everything I know to do and can not get the hp support site to give me a list of drivers for that computer. I know there must be some updated drivers for the computer 3 years, but I don't know how to get them and it is interfiering with other programs or drivers that need updated drivers that I can't. Please help me with this. I learned that the site is in place and current, but it does not work as far as I can tell, for my portable quad, dv7t-6100 cto. Everything continues to run and never becomes pilots. Thanks for any help in getting this resolved.

  REO51ST

  is older than me - the site is always down.

  fishcrazy13

  Here is a workaround:

  Drivers HP Pavilion dv7t-6100 CTO Quad Edition Entertainment Notebook PC Windows 7 (64-bit)

  It's somewhat austere course - this isn't the site of HP, so you won't see the full Support pages of manuals, operating instructions and troubleshooting.

  I checked the other models - those I previously checked watch this site matches the drivers supplied by HP for the model and the version of the OS.

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Click on accept as Solution when the answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• HP Pavilion dv7t-7000 CTO Entertainment Notebook PC - Upgrade processor

  Hello

  Any help would be appreciated.

  I have a HP Pavilion dv7t-7000 CTO Entertainment Notebook PC.  Due to a new job, I need to update my processor of the current 2.30 GHz (see exact specifications below, please) of at least 3.0 GHz.

  Is there a processor 3.0 GHz there that is compatible with this particular computer? I called tech support and they told me they don't know. I don't know who else to ask.

  This computer was purchased just a few months ago (before I got the new job). I really don't buy a new computer, if possible, if I can upgrade the processor in it.

  Here are the current processor specifications:

  Intel Core i7 3610QM
  Codename Ivy Bridge
  RPGA Socket 988 B package
  The 22nm technology
  Specification Intel Core i7-3610QM CPU @ 2.30 GHz

  Thanks in advance.

  Well, it seems that one (that I found) 3.0 GHz processor that Intel made for my chipset (HM77 Express Chipset) and it's the Extreme edition i7-3940XM (http://ark.intel.com/products/71096/)

  Priced at $1,000 +, it looks like I'll be shopping for a new computer.

  Don't know if anyone from HP read the peer forums, however, I won't buy another HP product.

  This machine had problems outside of me needing to upgrade the processor for my own personal reasons. Your support is grossly lack in all areas even pull your techscannot model with the serial number.

  Visitors should not go out on the Internet for questions of research like this.

• HP Pavilion dv7t-4100 CTO Entertainment Notebook PC Hard Drive replacement

  Hello

  I have HP Pavilion dv7t-4100 CTO Entertainment Notebook PC, and I had problems with hard disk of the guarantee period. for example I buy in 2010 and had a hard drive replaced in 2011 and 2012. Next time, he failed in 2013 (almost 11 months apart on average).

  The last time it failed, the warranty has expired so I thought to give it a try as employment through fixing/amortization of bad sector seagate software, Toshiba... that came out of Smart Drive Error.

  I use the HARD drive for some time now, but want to be ready for the next round and I don't know that he's going to be gone for good next time.

  Current HARD disk is 640 GB, 7200 RPM hard drive (replaced in 2012). HP 621046-001 manufacturer.

  When replacing, can I use ANY hard drive 640 GB? Can I use a hard drive that is higher than 640 GB? Different RPM?

  Any suggestions on hard drive?

  The recovery discs I had received with the replacement drive did not work properly. I had to use the first game I had created just after I bought the laptop.

  Thank you.

  -Pratik Patel

  I think that 160GB 2.5 "SATA III SSD is good for the system.

  Thank you

  visruth

• HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L

  HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L?

  The manual is not precisely which of the two.
  Any idea?

  David_kata wrote:

  HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L?

  The manual is not precisely which of the two.
  Any idea?

  Hello

  Both modules can be used. DDR3L means that memory using low voltage. Means that the modules produce less heat and last longer than DDR3 pure ones. I always use 1600 MHz CL9 DDR3 Corsair pure modules.

• Pavilion DV7T - 1200 CTO happened w / Wireless issues - work in progress - solved

  I took delivery on a DV7T yesterday.  It is configured with the minimap Intel 5100 AGN & Vista 32 Home premium (my first Vista machine).  I had updated my wireless router home in anticipation of his arrival, installation of a model of D - Link DIR-655 (Vista friendly 802.11n capable).  The router plays well with my existing XP laptop and has been configured for WPA2 AES & compatibility b/g/n.

  I configured the appropriate connection parameters and launched a manual connection.  I made changes to the router so the SSID was visible and defined the DV7T for automatic connection, but it took often more a minute before the DV7T would see even the network wireless and even a minute or two before reporting the signal strength. Each time, connection attempts failed, reports of a lack of response from the router.  After the double check (and returning) settings and password several times (and the audit by doing the same thing on another laptop which connected very well) I finally decided there was a problem and called for help.  Given that the order had been placed through Costco, I went through their Concierge as a first level service. Their script for was power off all computers (XP) on the network saying that a common problem was having a Vista machine join a network with XP already connected machines. No joy. Same lack of goodness after removing/reinstalling the drivers. It was as much as the script went to attempts at original resolution.

  At this point, no resolution & I plan just to return the machine for a refund (lack of wireless really it would damage the intended use). Propelled upwards all the equipment I had turned off.  Bored of not knowing for sure if it was an inherent incompatibility or a hardware problem (the day of delivery!)  I ended up out and pick up an express format card card N Wireless of Linksys.   Responsible drivers, plugged in the card and voila! immediately, the machine connects using the configuration of the connection that I had entered previously.  On top of that, the flow of data showed that 240-270 mbits.

  With this info, I went back to service, initially to the connection of Costco and then discussed in HP support. After a 3 hour marathon call, HP sends a replacement 5100AGN card to 'see if this fixes things', if it is not, the machine must go back to the service (as a problem of antennas would not be repairable client). Part of the duration of a call has been associated with finding the right part for a machine CTO.  The wireless card on my machine something SN (Broadcom) was set apart from the 5100 (although the list mentioned packing a minimap Intel next gen and the Manager device reports an Intel 5100AGN).  They have finally found a suitable part number (I hope).

  I just thought I would pass this along in case where someone else found themselves in a similar situation.  I'll post much after that the replacement property is displayed. As a side note, the Linksys N Ultra Rangeplus expresscard works really well as a replacement. Of course I'd rather not have something projecting from the side, but it certainly did the job.

  EDITION - ADDENDUM

  After the above post, I couldn't help but think that a problem of antennas sounded very probably - maybe a lead broken/disconnected (something I mentioned to the technology of the telephone service).  In any case, just a minute before, I went ahead and pulled the bottom panel, so I could take a look at the wireless card.  Technology said there would be two tracks running to the card - only was connected, the other has fallen in a crack between the card and the frame.  The wire not connected has been labeled "main" and there is a connector on the "main" labelled map  The two sons had been celo-glued to the card (in the broad sense), but I had the disconnected an oriented properly & pressed into the connector on the card.  He buttoned & turned on the machine.  He immediately finds the wireless network and connection has been made in a few seconds.

  My only ongoing question may turn out to be wireless performance.  Connection with the linksys card speeds were always above 200 (230-270).  Speeds, I see on the bed in so far have been initially lower than 100, with the best after being 150 mbits.  Any suggestions for how this can be improved?  Will the adapter 'learn' alone and get better over time?

  FINAL ADDENDUM-

  Model found on another forum that the 5100AGN has apparently a maximum 150 Mbps on a 300 Mbps max for RX & TX... the 5300AGN is 300 in both directions.

  This suggests that the 150 that I see is as good as it gets for my integrated card. Apparently, the Linksys expresscard I used is good for TX/RX 300.

  Nick

  Message edited by skhowell on 02/21/2009 08:22
  Message edited by skhowell on 02/21/2009 17:00

  I don't know that the costco guys worked just for the trouble shooting script, he gave.  On the plus side, he had an understanding of the issues, & spoke vernacular American English (and not in a call center offshore).  He was ready to continue, but I needed a time out.  The second call (after me obtain Linksys for comparison) was good enough and the technology was very ready he climbs to a technician of HP (once again, the continent - not off shore), which was certainly ready to order a replacement part, but crossed a few last checks more that the internal card could not be implemented. The part was sentenced & will be shipped without requiring a deposit of me. The only negative for telephone exchanges, it's neither opening proposed leads the lower panel to check the antennas have been connected correctly.

  As stated in the original post - edited-, the final fix was to open the Panel & visually notice that a 'primary' marked lead was not connected to the wireless card.  Attaching which lead to the consequence named connector on the Board eliminated the problem.   The disparity of the connection speeds between the internal 5100AGN and the Linksys 802.11n expresscard was due to the limitations of card design (150TX/300RX 5100AGN and 300 TX/RX for the Linksys), so the 150 Mbps I see currently for internally is as good it will become.  I'll probably send the rear replacement not opened as opposed to actually Exchange cards. (I don't think that the shipment may be shortstopped at this point...).

  Nick

• HP Pavilion DV7t-6000 - product number: XW899AV - replacement Fan

  Hello

  I need to replace my fan.  Looking at the manual, I see two differnet options to determine what I need spare part, but am not sure what graphics subsystem I.  I want to be sure that I have order the right part.

  Please let me know if you need additional information.

  Thank you very much!

  You are the very welcome.

  The best I can say, is that your specific configuration using the combo fan/radiator 640903-001.

  If you look at the list of surfer parts HP parts available for the CTO of XW899AV, under fan, you will see that part number indicated.

  http://PartSurfer.HP.com/search.aspx?SearchText=XW899AV

  You can order directly from HP on the link below.

  http://h20141.www2.HP.com/hpparts/Search_Results.aspx?mscssid=CFD6AB8B4FE14023A7BDDEA9F334E53E&SearchIn=PartNumber&SearchPN=640903-001

  The description of the part in the service manual States it includes thermal interface material, so I do not think that you must order the thermal pad kit.

  If you live in the USA/Canada, I found one on eBay that ships to Canada for less of what are the HP costs.

  http://www.eBay.com/ITM/650797-001-640903-001-641477-001-665309-001-CPU-Fan-Heatsink-thermal-as-DV6-6000-/251298880250?PT=US_CPU_Fans_Heatsinks&hash=item3a82949afa

• Bluetooth problem: HP Pavilion dv7t-6100 CTO Quad Edition Entertainment Notebook PC

  Hello forums HP!

  I have problems with the bluetooth in my HP dv7t-6100.

  I am no longer able to see/add devices bluetooth with Windows 7 is to add a device. He was working a few weeks ago, but was (waking up from his sleep would cause the device to turn off and I should enable in Device Manager to operate).

  I tried unistalling, then reinstall the drivers Wifi and different bluetooth drivers, but I can't see my bluetooth devices (which I know work btw).

  

  Try to add the com ports manually does not work, and I can't remove them later, because I get the message error "the specified service does not exist.

  And by clicking on "Choose a COM port for a Bluetooth device" brings up the help page for Spider Solitaire, which makes no sense.

  Any suggestions?

  Thank you!

  WELL, I GOT MY BLUETOOTH WORKS AGAINN!  (Sorry for the caps)

  After turning around uninstalling and installing drivers for many hours, deletion of registry keys, reseating the bluetooth module, I finally found something that worked.

  I have installed the Toshiba bluetooth stack software and unfortunately, my bluetooth has started working again! Wohoo!

  It was difficult to settle at first it seemed that the installation froze on the driver real bluetooth, but just cancel and start the program caused to function normally. (I think its because my stack of drivers/bt bt were corrupt and I couldn't make them disappear completely).

  So, if your bluetooth stops working to the point where mine was to, try another bluetooth stack. It should not be Toshiba, but it happens to work with my HP laptop.

  SEE YOU SOON!

• HP Pavilion dv7t-2000 CTO Entertainment. For 64-bit Vista recovery disk

  My hard drive has completely disappeared. I bought a new. On this site, I'll try to find the 64-bit version of Vista, I used to have on my laptop, but I see is the 32 available bits.

  Is it possible to get the 64, or should I not care and go ahead and get the 32?

  Thank you

  Ok. I have it. I was on the wrong page. Thank you.

• Pavilion DV7t - 4100 CTO with a white screen

  My laptop has a blank screen, but I can see the desktop via an external monitor.  I have not dropped it so I want to see if there is perhaps a cable connecting the screen LCD, but have no idea how to do to remove the cover.  Any suggestions?  I am currently on a trip to Central Asia and can not get the service for it, but I'm pretty handy if I understand just the thing to open the lid.  Thanks in advance for your suggestions!

  ccfisch wrote:

  My laptop has a blank screen, but I can see the desktop via an external monitor.  I have not dropped it so I want to see if there is perhaps a cable connecting the screen LCD, but have no idea how to do to remove the cover.  Any suggestions?  I am currently on a trip to Central Asia and can not get the service for it, but I'm pretty handy if I understand just the thing to open the lid.  Thanks in advance for your suggestions!

  If you can see the normal desktop with an external then post it mght be a loose connector or a liquid crystal display has failed.

  To access the connectors to display that you will need to remove the keyboard and the upper part of the envelope that the keyboard is connected.

  There is no need to try and remove the cover of the display.

  Best regards
  ERICO

• HP Pavilion dv7t-6100 CTO keys does not

  The 5 key of the numpad and normal keyboard do not work and also my key (decrease volume) f9 button also not working. I system restored back all the way back to the beginning of the month because I found it odd that the two 5 did not work, as if a virus plaguing the key board.

  Hello

  An idea for you would be to test the keyboard in an environment different ro see whether it is material or not.

  We can check the keys start on the recovery partition and opening a command prompt.

  Turn off the laptop

  Press the power button and then press F11 until the screen says recovery at the bottom left or said Windows loads the files. If it shows a different menu on your screen, you can have support too late or continues to load Windows, you may have a problem with the partition.

  Then when it loads in menu option so that the program is slected. I selects "System Recovery" and then in the following menu, press FN + SHIFT + D

  The keys w / test questions the prompt window commpand that opens.

• HP Pavilion dv7t Entertainment PC Memory Upgrade Question

  Product name: HP Pavilion dv7t-2000 CTO Entertainment Notebook PC

  PRODUCT # NB444AV

  OSOriginally installed: Windows Vista 64-bit Home Premium

  Currently installed OS: Windows 7 64-bit Home Premium

  When I bought the laptop, HP included a "FREE upgrade to 4 GB DDR2 memory (2 Dimm) 2 GB DDR2 memory (2 Dimm) system system'. I don't check then. Now, when it is slow, I checked the memory installed by 'Start-> computer-> (right click)-> properties-> installed memory (RAM). It shows that 2 GB.

  I'm baffled why it shows only 2 GB of RAM now, when HP was supposed to install 4 GB. In any case, I would like to upgrade memory now.  I have referred to as "HP Pavilion dv7 Entertainment PC. Maintenance and Service Guide "."  He describes the memory Module as:

  Spare part number description
  Memory 2048 MB (1-DIMM 667 MHz, PC2-6400),: 480382-001
  Module memory 1024 MB (1-DIMM 667 MHz, PC2-6400),: 480381-001
  Module of 512 MB memory (1-DIMM 667 MHz, PC2-6400),: 480380-001

  My question: can I use a 4 GB Kit (2GBx2) DDR2 800 MHz (PC2-6400) SODIMM 200 pin notebook Modules memory in the crack avialable? Memory at 800 MHz won't be compatible with 667 MHZ memory?

  I can't install module memory 2 x 4 GB to 8 GB? Will it be recognized by the card mother/BIOS/Windows?

  Thank you for your expert advice.

  You are the very welcome.

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c01689926.PDF

  Please see Chapter 4, page 54.

  It seems to me that there are two memory slots (one almost on top of the other). Take a look at the illustration.

  This is why the memory in Chapter 1 specifications indicate that you can install up to 8 GB of memory (2 x 4 GB).

  You can install a single chip PC2-6400 4 GB and leave the one you have in there now.

  It comes to the module memory 4 GB good cheaper brand I could find.

  http://www.Newegg.com/product/product.aspx?item=N82E16820148288

• Pav HP dv7t-6100 CTO w/Beats Audio sound system resonates at levels above 50%.

  HP Pavilion dv7t-6100 CTO Entertainment Notebook PC with Beats Audio sound system havingf volume distortion of the issues.  At levels exceeding 50% a reverb effect to ab which gets worse the stronger volume.  Using Win 7 Hm Prem

  Problem solved itself.