Pavilion DV9008NR gets F.43 BIOS < F10 > < Esc > "locked" with Win8 Pro

Similar Questions

• Updating BIOS for Satellite 1625CDT with XP Pro

  OK, I bought a new 256 MB of ram, when tried install it requested update of the bios. I find the update of the correct bios for her. When I try to update the bios, it is said that it can be run in 98 and 2000, I have xp pro. I also tried to start exploitation f12, it did nothing but initialize and beep at me a lot.

  How can I update the bios without having to install a new os (especially when i cannot reinstall pro because of no installation disc or recovery)

  Help, please

  Hello

  I checked the page of the Toshiba driver and there is a single place BIOS:
  This is version 1.11 of the 18/11/02.
  Have you verified that the BIOS Toshiba upgrade document?
  Please check. You will find this under the FAQ section on the support page.
  You will find the proper procedure the update of the BIOS.
  As far as I know, is a procedure to upgrade the BIOS 6.

  But I don't know if the upgrade of the BIOS allows you to use a memory of 256 MB.
  I found some information that this device can handle only modules memory 32 MB, 64 MB, 128 MB and max 160 MB memory.
  In this case you cannot use the module memory 256 MB

• Pavilion g6 2005ax: drivers bluetooth for g6 2005 ax with win8.1

  recently, I installed win8.1 and bluetooth has stopped working completely. No transfer of files at all. He continues to display a yellow exclamation point. Please help me as soon as possible.

  hardware ID:

  USB\VID_0CF3 & PID_311D & REV_0001
  USB\VID_0CF3 & PID_311D

  Hello

  Please try:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=ob-123970-1

  Kind regards.

• Satellite Pro L350 - where can I get the new BIOS?

  I downloaded the new BIOS - 1.60 for Satellite Pro L350 and it generates an error saying "This BIOS is not for your laptop".

  Where can I get the new BIOS - 1.60 for * PSLD0E Satellite Pro L350-154-02601WS4 *? Thank you

  Hello

  Are you sure that you have a Satellite Pro L350 PSLD0E?
  The series PSLD0E is a Satellite L350 (not Pro).

  But the BIOS update, you can find the Toshiba site.
  http://EU.computers.Toshiba-Europe.com

  Welcome them

• Pavilion P6-2378: Cannot get into the BIOS

  I've recently updated my BIOS to v8.19 on my motherboard of Jasmine using service pack SP67068 after seeing a security warning on my original BIOS on the HP driver update site.  After the update, I am unable to enter the BIOS and more!  I see more startup or other screen.  Here's what I've done so far:

  (1) I entered "bcdedit/set {default} bootmenupolicy legacy" (and standard).  No splash screen.

  (2) I momentarily pressed and also pressed the ESC key during several start ups.  No splash screen.  When I press ESC after turning, the drive just stops.  To continue, I have to press Ctrl-Alt-Del to continue, and it starts Windows normally without a splash screen.

  (3) I went to change the settings of pc and navigated at startup in the UEFI Bios, but after the restart, but the computer crashes just until I press Ctrl-Alt-Del, then it boots normally into windows 8.0, but without the boot (legacy or HP splash) screen.

  (4) I opened the discount to zero the BIOS jumper and removed the battery for 5 minutes, several times.  No splash screen and press ESC or F10 after that reboot causes hang until you press Ctrl-Alt-Delete.

  I wouldn't have updated the BIOS if it is not for the security warning, as it worked very well. Now, I can't get into bios no more.  Help, please.

  Hello!  Yes, your right, it's the graphics driver!  But I had already updated just before I had this problem, so I rolled back the driver and still had the problem.  But then I realized that my TV is connected to the computer when I upgraded and downgraded the graphics driver.  I've updated the driver with the TV disconnected and VOILA, I see the spash screens and am able to get into the BIOS.  The graphic resolution of boot has been masking splash screens.  THANK YOU for your help.  I am very grateful.

• Desktop Pavilion 500-210 a: do press F10 to enter the BIOS? I would like to try Linux Mint via USB

  Hi, thanks for reading.

  Am I right in thinking I have to get into the BIOS press F10? To get startup options?

  I would like to try Linux Mint on USB I already created.

  Thank you very much.

  Anthony

  Anthony, welcome to the forum.

  Yes, you start typing F10 as soon as the computer begins to start.  This will take you to the configuration of the BIOS page.  Then, search for the configuration of the boot order.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Pavilion DV9008NR BIOS problem 8 32-bit Windows

  I have a mobile Pavilion DV9008NR older:

  RAM - 2 GB RAM

  CPU - Athlon Turion 64 x 2 TL-50 1.6 GHz

  Motherboard - Quanta 30B 9

  Chipset - NVIDIA GeForce 6150

  Southbridge - NVIDIA NForce 410/430 MCP

  BIOS HP F.43 22/03/2010

  -GPU of NVIDIA GeForce Go 6150 (UMA) (MS Bsic Disply C52 A.2 adapter graphics card

  This has been previously loaded with WinXP SP3 with nLite slipstreamed 1.42 to load SATA drivers.  He was previously the BIOS flashed to F.43 (latest version).

  He was 'clean' updated with Windows 8 Pro Upgrade after passing all the tests.

  After reboot, I got the standard HP/Phoenix BIOS screen with the usual guests for BIOS Setup and boot order.

  Every time after that, the guests disappeared and Win8 charge * fast * as usual.

  Feature to win 8 seems to be in good condition, and necessary Ricoh 5-in-1 and drivers NVIDIA coprocesser loading without difficulty.

  I went back to my old image of WinXP and loaded several times BIOS normally with and invites you.

  After reloading Win8, back to problems of any invites after the first reboot.

  Try or during the BIOS support is * not * enter you the BIOS or boot order Setup.

  It seems that somewhere Win8 is "anticipate" normal "flow" of the BIOS.

  I understand that Win8 has a feature to take control to prevent the takeover of boot sector malware.

  Is this what is happening?  (Which becomes a real problem with and may be necessary).

  Is this a bug in the BIOS, or

  Is there something else.

  Thank you ~.

  Just talked to the MS Support for something different and wondered about it.

  Obviously, on some machines, this is * normal * and is the result of the function "Secure Boot.

  The answer is... you need to use the 'restart' instead of 'Shut Down' to prepare the system to give the menu .

• How can I enter the HP Pavilion p7-1234 Menu of BIOS?

  I have a desktop HP Pavilion p7-1234, and I can't get into the BIOS. When I press the ESC key, it brings me to the Windows Start menu. F1 does not seem to do anything, and F2, brings me once more, in the Windows Start menu. Does anyone know what key will work? I couldn't find anything on the site of HP on how to access it, either. Any help would be great.

  Try F10

  I hope this helps.

• HP Pavilion P6 2055sc: Cant enter BIOS because graphic card problem.

  Hey!
  So for the moment, I try to turn on virtualization, I m able to boot the computer into windows but do not enter network boot (anti-spam f10 key before the HP loading screen) but because of the past problems, I struggle to get into the BIOS.
  It all started when I got a new (Asus Geforce GT740) graphics card and this caused my computer not being able to start, without forcing in the network boot.

  But like I said, when im trying to get into the BIOS, it gets to the screen where it says "Press Escape to access the Boot Menu" which, at that time, it ignores when I press ESC.

  I tried holding it, I tried all the keys F1 - F12, but nothing makes a difference, so im wondering if there is a way for me to get into the bios and work around this problem.
  I looked for so updates to the BIOS, but I couldn't find one so far.

  @alilleland, welcome to the forum.

  The reason for which the computer would not start with the GT installed 740 is, it requires UEFI in the motherboard instead of a standard BIOS.  If you always use the GT 740, I suggest to withdraw to see if you can enter in the Boot Menu.  You can do that by typing the ESC key as soon as the computer begins to start.

• U940-11N SATELLITE - cannot get into the BIOS or Boot Menu

  Hello

  I am currently in the processing you want to perform an update of the operating system on my laptop. When I bought the laptop in a well known department store, it came loaded with Windows 7, despite the operating system preloaded in Windows 8 when buying.

  I already disabled fast closing down, such as recommended elsewhere on the forum. However, after the closure of many downs and startups, based on all kinds of combination of keys to try to get the menu of boot or bios, I can't do it. It starts directly to Windows.

  I tried to boot from an aswell as a bootable USB external DVD drive.

  I tried F2, F12, F10, ESC and DEL at the start, but nothing. With pressure repeated, with continuous waiting, with the FN button, just in case... just nothing!

  Could someone provide an overview of this please?

  Kind regards
  Jamie

  Thanks for the feedback jamieb!

  Good news!

• I can't get into the bios

  When I restart my laptop I have the HP logo with the small "leak of press to enter the boot menu. Usually, when I press ESC at this stage, it gives me options to go into the bios, change the boot order and enter the Recovery Manager.

  But earlier when I try to do it, by pressing esc it will start in the windows Boot Manager, giving me the boot options in windows or to do a test of memory and I don't see any option to get into the bios!

  Laptop model: HP Pavilion dv6 3030ee!

  OS: W7Ultimate Bit

  Please someone help me with this problem!

  Thank you

  Finally I solved it! I just took the battery and put it again! then my cell phone is ok

• Cannot get into the bios of the start screen.

  Well I had run into trouble with my video card, and it had to be replaced. Before I do that but I was invited to try a system recovery to get rid of any possible program that was at the origin of defective symptoms of a video card.

  Well, I replaced the video card and everything has been fixed. But... because of the recovery of the system, some of my settings changed in Bios is returned back to default. I remember specifically in the Bios to disable the action keys (Fn + everything related F who did something).

  Problem is now I can't return to the Bios to change the settings once more.

  In order to dispel some of the suggestions more simple I tried already:

  Using another keyboard (allows me to enter the Setup program, reinstall system, diagnostics, etc. very well but not Bios)

  Unplug everything in the back, but the monitor and keyboard

  Erased from the memory CMOS, which led me to a screen saying that my Bios is set by default and to go to the configuration, press F10. But by pressing F10 led me to the single configuration screen and couldn't get into the BIOS.

  I carefully searched the internet to find answers for this problem, but I really hit a dead-end.

  I want to say I know that I've changed before setting on this computer it's just that I don't remember how. I mean I tried F1, F2, Del, Ctrl + Alt, and everything inbetween for shortcut keys enter the BIOS nothing helped.

  Thanks in advance for your reply eagerly to receive a response.

  Oh and I have a HP Pavilion Slimline s5260f, if that helps anything.

  Well fiddle with stuff I have solved my problem. Thing, it's actually, I couldn't have what I wanted through the BIOS screen. I remember he made on my friends computer to get rid of it, where their BIOS had more options.

  As for anyone with my problem (hit accidentally the Fn and the sleep button) I recommend that to go in Control Panel Power Options - then select doing nothing to hit the Sleep button.

• Cannot get into the BIOS on my Sat A30

  Hi all

  I have problems to enter the BIOS. I heard when I want to get into the BIOS I have to press the ESC key when Toshiba logo is shown in the startup.

  But nothing happens!

  Could someone help me?

  Sammy23

  Hi Sammy23
  That is right. It's actually the ESC you press. But there is more to know. During the time where appears the Toshiba logo, that represents about 1.5 seconds or so machine "listens" for the ESC at the beginning.
  Means that you have to be quick like a cat to press ESC. I usually press ESC several times all the way to the market (until the Toshiba Logo is displayed). Try this. Another way to get into the BIOS uses Toshiba HWSetup (looks like a key any) in the in the Windows Control Panel. You can access almost all the parameters of the BIOS from there.

  BR

  Tom

• Portege 7200: Hot to get into the BIOS?

  Hello

  How is it possible to get into the BIOS in Portege 7200?

  Thank you!!

  Harry

  Hello

  I found the same info. Press the ESC key just after switching on the device.

• Cannot get into the BIOS on my Portege R700

  Hello friends,

  I have laptop Portege R700-1321.
  1 year a go, I was updating my version of BIOS to 2.20 and after that I have cannot get into the BIOS!
  try a passer-by but noway :(

  When you press F2 after you restart the computer nothing add and put it back again.
  try to change ro F10 boot order but still just restart :(
  I need to change the boot order to install the new OS fresh and of course my BIOS setting.

  Please help me.
  If any body had a same problem or know how to fix it :(

  First of all you n t need to change the boot order in the BIOS if you want to reinstall the new system.
  You can press F12 all turn on/off the unit.
  Then a menu should appear where you can change the boot device.