Pavilion e9220y: upgrade memory for the e9220y

No errors.  Recently upgraded to Windows 10-64.  Always the equipment of origin, Phenom II X 4 910, and 8 GB of ram.  Computer will be used for audio editing and I was curious to know if the unit could benefit from an upgrade of ram.  If it were possible, the device can handle

Hello

1. the information says you can use the modules of 1333 MHz but * modules of DDR3-1333 runs at 1066 MHz, if three or more modules are installed.

2. Yes, this will improve but as mentioned above: not noticeable.

Kind regards.

Tags: HP Desktops

Similar Questions

  • Pavilion p6608f: upgrade memory for p6608f

    Hello, my Pavilion p6608f came with 4 GB of RAM. I want to upgrade. By HP features, the motherboard is a MSI ms-7613 and it should support up to 16 GB of RAM (4 x 4 GB DIMMS). I bought 4 DIMM which seem to fit specifications, but the computer wouldn't POST after installation. I tried reseating the DIMMs, but no luck. My hypothesis is that the memory is not compatible.  I'm unable to find good information on the compatible memory for this computer on the site of Kingston, MSI site, or the site of HP. (Any ideas on one) why the memory I bought is not compatible and b) how to find compatible memory?

    Thank you.

    Saw that Crucial guarantees their recommendations, I'd go with it.  You may contact their Customer Service to see what they have to say if you are still skeptical.  I have recommended Crucial memory for years without reports of incorrect memory being received.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • Pavilion dvr7: upgrade memory for laptop

    Hello forum could use some advice. My laptop is a (product of HP Pavilion dv7 notebook # XH108UAR #ABA) currently has two (2 GB 2Rx8 PC3-10600 s - 09-10-F2) of the memory installed modules in it. Can they be improved and replaced with the following memory modules:

    Kingston ValueRAM 4 GB Notebook Memory Module - 1333 MHz, DDR3 PC3-10600, SODIMM, CL 9, 204 pins, 1.5V - KVR13S9S8/4

    If the answer is "Yes"; This will make a significant difference when it comes to operating speed and the ability to play some of the newer games that require more memory to play. If this isn't the good memory to upgrade my laptop with what I need and how much memory can I add to my system. Your advice would be greatly appreciated. Thanks in advance!

    FJG1

    Hello

    The value maximum supported are 8 GB (2 x 4) DDR3 SODIMM.

    Manual

    http://h10032.www1.HP.com/CTG/manual/c02642701

    Supports up to 8 GB of RAM in the following configurations
    Memory ● total system of 8192 MB (4096 MB × 2, both channels)
    System memory total 6144 ● MB (4096 MB × 1 + 2048 MB × 1)
    Memory ● system total of 4096 MB (2048 MB x 2, dual-channel)
    Memory 4096 MB total system (4096 MB × 1) ●

    The problem of the KVR modules is that sometimes does not work, if you are in the United States, one of the most interesting options is Crucial 1.35v - 1.5V DDR3 memory dual voltage

    http://www.crucial.com/USA/en/compatible-upgrade-for//Pavilion-dv7-4171us

  • Upgrade memory for the old S320CDS Satelletie cell-is it possible?

    Can someone tell me if it is possible to upgrade RAM on my old Toshiba satellite - it's 7 with windows 98
    This topic - and account currently the 64 MB of RAM it came with when it's new.

    Thank you!!

    Hi Johanna

    As far as I know max your device memory is 160 MB. You can buy the second module with 64 MB of memory. Part number is PA2044U. Check this number with option of Google and you will find many suppliers where it can be stopped.

    You can also buy this RAM module:
    PA2043U 32MB
    PA2054U-MS 128 MB

    Good luck!

  • Upgrade memory for the L-series satellites

    I have just installed a new 512 memory card that works very well.
    Is it possible to include the old card 256 as well?

    After trying to do, he does not connect and I'm afraid to do damage. If possible someone please give me the proverbial 'idiots guide '.

    Thank you

    Hello

    First, you must put the name of the laptop!
    How if someone help if the laptop is not known!

    In any case, if the laptop is able to handle 1 GB memory then it should be possible to use memory modules 512 MB and 256 MB!

    But I recommend to use the same modules. Sometimes, it happens that different modules are not compatible and so the laptop cannot start or run correctly!

  • Question about the upgrade memory for my Satellite M40-307

    Sorry for the newbie question. But if I have 512 MB of memory for the time being, what are my upgrade options?

    Do I have to buy pairs of memory? So I can or buy 2 x 1 GB = 2 GB, or 2 x 512 MB = 1 GB + 512 existing. Or can I say just buy a single 512 MB or 1 GB chip?

    Since no one wants to answer:
    1. check if your laptop supports Dual Channel Ram (it should be, but just see the manual to be sure)
    2. knowledge of what type of RAM you have. This will add or remove a possibility of upgrade

    The thing with Dual Channel is, that you have the best performance if you use 2 RAM of the same type (really of the same type: company, size...)
    you could:
    3. Add a 512 MB of RAM of the same type you have
    3 b. buy 2 pieces of new RAM of the same type (1 GB + 1 GB, or 2 + 2 GB) and do not forget that your laptop supports this quantity (once again: manual to check)

    You will also find in the manual, if your computer supports DDR or same DDR2 RAM (faster)

    If you have lost your manual, you can download it here on the toshiba Web page

    I hope I could help a little.

  • Upgrade memory for Satellite 2800 400

    I am trying to upgrade my ram to 128 on the laptop. After following the instructions for the instillation, that I turned the laptop on to find that it was slower than before and that the new ram had not registered as 128, and always thought it was 64 in someone can help me solve this ir is there anything I can do?

    Hi Ben

    Maybe you used the memory modules bad.
    As far as I know that you can upgrade memory for max 192 MB
    The 64 MB has been installed in an internal memory and cannot be deleted.

    I found these compatible modules:
    PA3003U - 1 M 03 32 MB
    PS3004U - 1 M 06 64 MB
    PS3005U - 1 M 12 128 MB

  • Upgrade memory for Tecra CDT 550

    I have a toshiba tecra 550 CDT laptop with 64 MB of RAM.

    I want to migrate the RAM.

    Memory expansions I could install and what is the maximum size of the memory?

    Thanks for any help.
    Jochen

    Hello

    Well, as I know you can upgrade memory for max 160 MB.
    I found information on this module and it is compatible with your laptop:

    16 MB RAM Part number: PA2039U
    32 MB RAM Part number: PA2043U
    64 MB RAM Part number: PA2044U
    128 MB RAM Part number: PA2054U

    Good bye

  • Upgrade memory for iMac 24-inch, early 2009

    I want to upgrade memory for my iMac 24 inch, early 2009 with 4 GB. What a memory of 8 GB will work Best Buy? I have a gift card I want to use.

    Thank you!

    Looks like you can get RAM for about half the cost at crucial.com

    You need 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

  • 3097 memory failure allocating memory for the Variables

    Hello - have an old Lenovo tablet of 3 year with Windows XP. Its been performing very well. I get a message that appears randomly who says:

    3097 memory failure allocating memory for the Variables

    installedapp872 = StrSub (Apps, Start, stop-stop)

    WinBatch 32 2000

    WIL Version: 3.0cbv

    has ran a chdsk

    Reinstall the memory.

    Found nothing on Google about this message.

    I appreciate your help.

    Try R.clicking my computer, properties, advanced, performance, swap file,.

    Click Change button, with C: drive selected, the value to "let the system handle",

    2 X game, close, restart the pc.

    Also, try http://oca.microsoft.com/en/windiag.asp

    Download & run the test memory microsoft...

  • recommendation of the memory for the guest operating system

    Hi guys,.

    I need some advice

    I have a pile of vsphere 5 made of 2 servers on each server that I have on 5 VM

    (1) domain contoller 2008 standard edition + dhcp + dns

    2) exchange 2010

    (3) file server

    (4) primavera

    My question is what is the recommended memory and cpu for these VM configuration? I'm a bit confused

    What happens if I don't set up the limits and booking hotel and leave all default? What is the point of the week in this configuration? If I leave all default each VM does not use memory a cpu as it needs?

    Thank you specify in advance

    To add the tips of memory... Many people allocates memory for the virtual machines that will never be used, and ultimately you consume the memory of your host much faster than necessary. Start low when allocating memory to a virtual computer. Adding memory is simple to make, after you have collected on the functioning of your host performance data. The Performance tab will show you what is happening.

    Mike

  • Upgrade memory for Pavilion dv7

    In October, I bought a Pavilion dv7 (model dv7t-7000) with 16 GB of RAM.  Is it possible to upgrade to 32 GB?  I also want to add an SSD as a second drive.  Is this possible.

    Hello

    It's a CTO machine so we can have its specifications.

    1. for the RAM, I think 16 GB is its limit as shown in the following link:

    http://www.crucial.com/upgrade/HP-memory/Pavilion+dv7+series-models.html

    2. Yes, you can use SSDS on the second span, please watch the following video:

    http://www.YouTube.com/watch?v=5kZ4irwlyEY

    Kind regards.

  • Questions about the upgrade memory for gateway P55C-200

    It comes from an old computer from 1997. I'm trying to update and upgrade for the treatment of text and with older games who have worked on it, even if a bit slower that I liked. MDK is a favorite. I add that a little more RAM will help. It has windows 95 on it. He is currently in good working condition. I have a perfectly good printer and a scanner that I can't use it on my other computers with operating systems newer, but which works well on this one. The computer has a card? IRE 32meg with a spare slot, CPU Pentium 200 HZ and a 4G IDE hard drive.

    What type of card m? IRE this computer accepts it and how can I add? The existing memory card has no info about it. I visited the manufacturing sites of memory several, and they come in white for this computer only. I think maybe it's SDRAM PC66, but I don't know. Any information would be appreciated.

    I just ordered two 128 meg sticks, clock 4, CL3, PC66. Who will be my max at the limit of my system to 256 meg. I still don't know whether or not the card memory factory was PC66, as there was no label on it, and my manual is non-specific, because it covers a group of computers that use the same series of motherboard. The seller did some research and said the Board recommended will work for me. He gave me a link http://panam.gateway.com/s/motherbd/intel/m00260/m0026023.shtml that my Board is covered by the listed series. I guess in a week or so I'll know. Thank you all for your help.

  • Help to choose the upgrade memory for Aspire D270-1401

    I had difficulty pinning down the specification of an upgrade memory to 2 GB for my Aspire One D270-1401.  Can someone help me decide between PC3-12800 and PC3-8500.  It doesn't seem to be any help available for this model on the Acer site.

    The model has locations of memory that one alone and it supports DDR3 PC3-12800 unbuffered NON - ECC 1.35v.

    Click on the Kudos to say 'Thank you' to help!

  • Upgrade memory for Pavilion g6-2239dx

    Hello

    Just bought a g6-2239dx with Windows 8 Pavilion this weekend and want to update the memory. Page product standard does not mention the speed or max memory supported, only that it has 4 GB DDR3 SDRAM (1 DIMM).

    Can someone advise me please on maximum memory supported for the g6-2239dx and how fast?

    Thank you!

    http://support.HP.com/us-en/document/c03550111

    Hello

    The maximum supported Ram is 8Gb - IE 2 x 4 GB DDR3 PC3 12800 (1600 MHz) modules.  The replacement procedure is detailed on Page 46 of your & Maintenance Guide.

    Kind regards

    DP - K

Maybe you are looking for