Pavilion Elite HPE-570f RAID 0?

Similar Questions

• Pavilion Elite HPE-570f: update Bios

  Pavilion Elite HPE-570f

  Prod. BV542AA #ABA

  Recently upgraded to Windows 10 (64 bit) to Windows 7.

  The Bios is older than 5 years. is it possible to upgrade?

  What I've read, HP uses modified BIOS, not those generally available on the motherboard manufacturers websites, even IF you can find your Board on the website of the Board manufacturer. The only "safe" to install BIOS would be those that HP show for download on their Web page to your computer, in your case this page is:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-elite-HPE-desktop-PC-series/5035344/model/5061025#Z7_3054ICK0KGTE30AQO5O3KA30R1

  and I don't see any update of the BIOS listed so far.  In my case, with my computer, they did an update that appeared shortly after my purchase.

• Better graphics for HP Pavilion Elite HPE-570f card

  I have the Pavilion Elite HPE-570f (BV542AA) Windows 7 ultimate with 16 GB of ram upgraded and an upgrade

  HARD drive with 7200 RPM. The P/S is a 460w and ATI Radeon HD 6770 with only 1Gig vram. I would like to upgrade the video card up without compermizing the P/S.

  Does anyone have any ideas.

  Thanx.

  Hello

  The NVIDIA GTX 550TI would be a nice bump in performance.

  The NVIDIA GTX 550 TI compared to the Radeon 6770.

• Hp pavilion elite hpe-570f system recovery question

  I'm having all sorts of problems trying to do a reinstall my hp pavilion elite hpe-570f system. I'm trying to use the recovery partition. I can get to options and don't start the process, no problem. He has even reformat the hard drive. The problem arises when relocation of the factory software. Usually, it hangs at 1% until the screen loses the signal and that's it. I have disconnecged everything - including the usb keyboard and mouse on the last attempt - but the most I ever got was 35% before the screen loses the signal and nothing else happens. I thought that if I left him alone, he would install completely, but this last time I left for almost 4 days and still not install. Advice?

  Given that it was me that pisses off the coast, I purchased a retail version of windows 7 unlimited and tried. The same problem. Bought a new motherboard - and the case since the case of HP is designed to put another issue - and he moved very well. Have not had any problems of video card. It seems therefore that the cause of this whole ordeal was the motherboard.

• Pavilion Elite HPE (HPE-210y): Travel in RAID 0

  Hi all.

  Recently, I upgraded my hard drive of 1 TB to 2 TB. I bought two hard drives of 2 TB because I planned to run RAID 1, but after that I cloned one of the 2 TB drives and removed the old 1 TB, I decided to save in a different way.   I have most of the things I wanted to back upward again on the old hard drive and another method seemed to be a better route. My uses of son for a little game and RAID 1 seemed to be struggling against productive and not as safe.

  So, I'll be able to move my new drive 2 TB in RAID 0 with my other new 2 TB drive even if I use one right now?

  Else consider this computer Noob?

  Once more, I find myself at the mercy of the much more educated HP Forum members lol.

  Here are my computer specs:

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-200-desktop-PC-series/4160010/model/416001...

  Hard drive is the same, but upgraded to 2 TB

  Pavilion Elite HPE (HPE-210y), AMD Phenom II x 4 3.0 GHz, 4 X 2 8 GB RAM, GeForce graphics 970, win 10

  Hello

  HP's instructions for configuring RAID using the AMD RAIDXpert. Read at least twice.

  Check your BIOS settings and make sure that the SATA is set to RAID.

  I suggest you connect hard drives to ports SATA 1 and 2 (blue and white). Among the old HP AMD motherboards we're picky about which ports SATA would be supported RAID.

  

  BTW - RAID 1 is much more secure that it will provide redundancy in the event of a hard drive failure and RAID 0 won't.

• Pavilion Elite HPE-170F recovery problem

  I woke up yesterday to a problem of blue screen on my Windows 7 Pavilion Elite HPE-170F.  Following reboot, but would end up the same way.  Tried to boot mode without failure, but same result.  A technician came to the House and he did Diagnostics with its test disc that says the HD had to be replaced.  I had my recovery disks that I made when I bought the computer 4 years, which made her happy.  He installed the new HD and put the old in another location, planning to transfer my files after the restore.  He began the process of recovery with disk 1 and told me to change the disks as needed while he went to see another client.  All done and then it entered into startup mode of windows. went black for a while and then gave me the message "Windows Setup could not configure Windows to run on hardware.  The technician returned and tried other things but the same results.  We ordered a new series of HP recovery disks but will take a week.  The question, since the instructions say to disconnect everything except the monitor, keyboard, and mouse, would be the printer that is wireless a problem and should it be turned off?  Also, the mouse and the keyboard are different than the original, which would be a problem.  In addition, Windows installed several updates of the day before the problem.

  I venture a guess the your computer uses an Intel chipset, can be set to "RAID", and the replacement of the hard disk is a disk AF (Advanced Format). Please see desktop HP - can not recover the PC after replacing the Hard Drive with an AF Drive (Windows 7 and Vista) for more information on this topic. Please see computers HP-HP System Recovery troubleshooting (Windows 7) for more information on the AF drives and some troubleshooting tips.

  Alternatively, if you can still read the Windows product key of 25 characters on the COA Microsoft attached to your computer, you can install Windows 7 using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer. Using this method will not install HP customizations or value-added software and you will have to manually install all necessary drivers.

  Windows 7 SP1 can be found HERE and HERE.

   

  Direct link to Windows 7 USB/DVD Download tool.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• I want to add a second hard drive for my Pavilion Elite HPE 410f. Recommendations?

  I want to add a second hard drive for my Pavilion Elite HPE 410f. Recommendations?  Somewhere in the 320 to 500 GB range and I want a quick unit because it will be used for rendering videos.    Thank you for your response.

  Hello

  How fast is fast is the real question.

  Have you looked at hybrid drives OCZ? Expensive but probably the fastest option.

  Seagate also made a hybrid hard drive.  Good price... You will need a 3.5 "to 2.5" support if the player does not support.  If you install the drive in an empty optical Bay then you will need a 5.25 "to 2.5" support.

  Your other choice is 7 200 or 10 000 rpm traditional hard drives.

  Another option would be to add a PCI sata and two external hard dirves configured in RAID 0.

• How to add to my HP Pavilion Elite HPE-590uk Usb 3.0

  Hi does anyone know if I can improve my HP Pavilion Elite HPE-590uk for usb 3.0 and if so could you recommend a product that I could buy to do this.  Thanks in advance.

  One of them check it:

  http://www.overclockers.co.UK/showproduct.php?ProdID=CC-003-AK

  This is to use a pci-e x 1 card. You have 2 these slots available. This will show you how do:

  http://h10032.www1.HP.com/CTG/manual/c02255267.PDF

  See the section on the replacement of a card.

  Instead of plugging on the long black slot which is a video card plug into one of the slots black short. You have Windows 7 I think which means that you will need a driver, but that should come on a CD with the card. Will need you a power connector (molex) on the map, too.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pavilion Elite HPE-500f desktop PC

  HP Pavilion Elite HPE-500f desktop PC - I would like to upgrade food, video card and hard drive. Can I use a SATA III hard drive? Can I use a 4 Gig ATI video card? Those are the weak links in this computer in the measurement of performance, Windows 5.1 index. The ram has already been updated to 16G. I would use a hard drive WD Black edition.

  Thank you!

  Jon A. Schoen

  [email protected]

  You can use a SATA-III HDD but the 785G chipset only supports SATA-II. You won't see any difference, and the SATA-III is backward compatible. You have a 300W power supply. You can put in a better and with a minimum 500 or 600 watt PSU, you can install any videocard, pcie 16 x which will be in good physical shape. In retail offices, there is simply not as much space as in a custom build Tower and best video cards these days are huge things two locations. Don't forget, it fits with room to spare, or you will have problems of air circulation.

• Pavilion Elite HPE: Power on password

  I powered up the computer after 4 years of non-use and do not know what the power u [password is? I can reset the motherboard some how? Help, please. I can't find a connecting cable

  You are the very welcome.

  In order to clear the BIOS P/W, please refer to the link below, last position on the page...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-desktop-PC-series/5035344/model/5036175/document/c02668523/

• Pavilion Elite HPE-170f Deskto: Memory Upgrade

  I have the HP Pavilion Elite HPE-170f desktop.

  Motherboard: Pegatron IPMTB-TK (Truckee)

  Processor: Intel Core i7 CPU 920 @ 2.67 GHz, 2668 Mhz, 4 Lossnay, 8 logical processors

  Storage media: 6 x DDR3

  Memory type: Types DIMM PC3-8500 (DDR3-1066)

  I currently have 8 GB of memory.

  What is the maximum I can install?

  Operating system: win 10 Pro 64-bit

  Thank you

  John

  @jmwright1058

  Memory upgrade information

  • Architecture memory triple channel

  • Six DIMM DDR3 240-pin connectors

  • Supports types DIMM PC3-8500 (DDR3-1066)

  • Memory non - ECC, unbuffered

  • Supports DIMM DDR3 4 GB modules

  • Supports up to 24 GB on 64 bit computers

  • Supports up to 4 GB * on 32-bit computers

• HP Pavilion Elite HPE-495uk for: HP Pavilion Elite HPE-495uk

  HP Pavilion Elite HPE-495uk Desktop Hi there I have the computer following and need to update my graphics card and want something with 2 GB what cards will fit in my system and have I not enough power to power a new 2 GB card? Any help would be great. Soon TV

  Hi there @Tele,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have any questions about the upgrade. I'll be happy to help you.

  The Notebooks of PC HP Pavilion Elite HPE-495uk Desktop, this computer has a slot PCI Express 1 x 16 for the graphics card and a 460 W power.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• HP Pavilion Elite HPE - 532 s: 'Secure Boot Configuration' not found?

  Hello support, I wanted to disable startup secure for my office.
  I have a pavilion Elite HPE - 532 s Bios 7.15 I followed the step of many posts, but I don't have it under the heading "security"?
  I am on window 10 64-bit UEFI.
  I wanted to disable, because I have a new GTX 960 graphics card and it stuck on the HP logo at startup all the time when I use the new card. !!

  I tried to disable the security slot, but no matter what I do I get a black screen for my card both old and new so I have to reset the bios settings.
  Help me please.

  Thanks for the additional information.

  Here is my diagnosis/notice:

  I don't think you'll be able to get the GTX 960 to work with this system.

  Why it won't work in the UEFI/GPT:

  It will not work in the UEFI [I think] 960 GTX is one card of UEFI and you must disable secure boot to make it work. Your BIOS is only "UEFI compatible" originally planned for Windows 7 [which does not support secure boot]. If you are unable to disable the secure startup, you can not use this card.

  Why it won't work in legacy/MBR:

  It won't work in legacy because it's a single card of UEFI.

  My suggestion:

  Return to the legacy/MBR and use a graphics card that has a dual BIOS BIOS/hybrid or one who supports in particular the Legacy BIOS as described in one of my previous posts.

  Some other things to consider:

  You PSU has enough power for this card? I think it takes a minimum of 400W PSU.

  You connect the auxiliary power connector?

  Have you tried to disable "Intergrated Graphics" in the BIOS [as appropriate]

• HP Pavilion Elite HPE-575 has: the graphics card upgrade

  Hi I want to know if a GTX 950 oc 2gbddr5 graphic card is compatible with my HP Pavilion Elite HPE - 575 a pc, if someone can shed some light on this would be very appreciated

  @W1976, welcome to the forum.

  W1976 wrote:
  

  Hi I want to know if a GTX 950 oc 2gbddr5 graphic card is compatible with my HP Pavilion Elite HPE - 575 a pc, if someone can shed some light on this would be very appreciated

  No, the GTX 950 requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  There is no way to update the motherboard in the UEFI.  Latest video cards do not for UEFI were the GTX 660/670.  I suggest that you choose a manufacturer and contact their Technical Support to help them choose the best card for your system.

  You will also need to upgrade the power supply (PSU).  It is only 300W.  Most newer cards require at least 400W to work properly.  Although status map specifications at least 300 w, members reported that they had at least to 400W.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion Elite HPE-035sc: msi iona 1.0 ms-7613 can handle a gtx 750ti?

  Hi I have a

  HP Pavilion Elite HPE-035sc desktop PC i7 870 2.9 ghz 8 GB ram

  Serial number: [personal information]
  
  Product number: VS311AA

  BIOS: american megatrends Inc. 5.13, 03/03/2010

  BIOS mode: legacy

  OEM power 460w

  I would like to know if the motherboard can support the gpu or not

  Please answer as soon as possible

  Thank you < 3

  Greetings,

  750ti GTX requires BIOS version 8.xx.

  This card to initialize not due to lack of UEFI support in the BIOS.

  Discover the Nvidia 600 series graphics cards as they will run on a legacy PC BIOS. The 600 series cards can run on a PCIex16 Gen1 slot. I have not checked this.

  I've seen information indicating that some AMD manufacturers ship AMD cards with the ability to switch between legacy and UEFI BIOS.

  Check out it at Sapphire Tech.

  So these four cards do not work when it is combined with adequate food on a legacy BIOS PC with a PCIE x 16 Gen2 slot.

  The PC can have only one slot PCIex16 Gen1. The cards are not compatible in this case.

  You will need to check the prospective: graphics card power and the dimensions of upgrade to check both will fit your turn.  We must also find a graphics card that runs on a slot PCIex16 Gen1.

  See you soon!