Pavilion g6: 2 left usb port of the computer hp laptop pavilion g6 does not

Similar Questions

• Is there a way to connect my DV camcorder to my usb port on the computer instead of a 1394 port, that my computer doesn't have?

  My Canon Elura 100 DV camcorder has a usb connection, but Windows will not recognize it when it is plugged into the usb port on my computer.  (The manual Elura says to connect it to a 1394 port)

  Hello

  According to my research, you must use the supplied canon DV cable and use it. Many users is connected it correctly with the usb port. I recommend you contact Canon support on that.

  http://www.Canon.com/support/

  I hope this helps.

• NEX - 5N, unrecognized by the USB Ports of the computer

  I have a laptop Asus UH56e which became more and more incompatible with my NEX - 5N. Is not what USB port, I plug the NEX in, or what USB port in my 4 ports USB hub, I plug in, the camera is not recognized by Windows 7. I try to install the new update of firmware and can't even get past the first step, which is the connection to the computer. Is there anywhere I can download the driver for the NEX - 5N install on my laptop? It seems that the driver is not install from the camera, or is not recognized by Windows 7 (64-bit).

  Yes, it shows USB MTP Mode, but it does not connect to Mass Storage. By clicking import images and videos results in no new pictures or videos found on this device, despite the fact that there are pictures in the camera. Click Browse files and media then, however, shows the folder and clicking on that, I can see the image files and copy them to a folder on my hard drive. Yes, I tried to update the firmware several times, but because the camera is not recognized by the USB ports, the camera is not found by the firware update, either. Yes, I unplugged the USB hub and all other devices and also makes no difference. I don't have another USB cable, however. I have access to another PC Thursday, so I'll check then. Thank you, Glenn.

• How to transfer photos to computer Olypus softwear to a memory stick using the USB port on the computer?

  Have a ceiling of memory 2 GB Kingston Data Traveler 100 memory stick (w) technology. Want to down load a series of photos already on computer with master Olypus softwear registration. Should what procedures I use to achieve this? Please specify all measures to achieve this transfer process. Thank you

  For the task that you describe... I do not see the need
  for the Olympus software.

  Insert data traveler into a USB port and go...
  Start / computer.

  The data traveler must be recognized as a
  Removable drive with a drive letter.

  OK... now that you know the drive letter... If you right
  Click a selected group photos or an entire folder
  You should be able to choose... Send to / removable
  Disk (? :))..) .This must copy the pictures to the data
  Traveler

  Make sure that the photos are in one or more records because
  the number of photos that you can copy to the directory root
  may be very limited. And you will receive the following error:

  "Impossible to copy the XXXX: failed to create the directory or file.

• With the help of Windows Easy Transfer - need to transfer the old HARD drive to new computer - old HDD attached as external drive for the new usb port of the computer - help

  New computer installed Windows 7 and gave me an option to use Windows easy transfer to transfer files, data, programs, etc. from my old computer.  All I have from the old computer's hard drive; a lightning strike fried either food or his mother by car.  I have attached the hard as a disk to the new computer using the usb cable provided with the external hard drive case.  It is recognized as drive E: on the new computer.

  Trying to follow the instructions given by the Windows Easy Transfer software.  Get the software/folder from the old hard drive (drive E), but trying to run the software that I can't seem to do anything on the old disk.  When asked what is the former or the new computer - I respond to old, but no new file is created for the transfer.  When I answer again, a new file is created on the new computer (rather than the old HDD) and then he transferred again to new.  I can't create a file of whatever it is I want to transfer from the old HDD.

  I can't use an easy transfer cable because the old computer does not only the hard drive.  I can't connect to a network for the same reason.  I only have the hard that I can attach to the new computer.  But I can't get the new computer to process the old hard drive separately for transfer purposes.  The only other option I can think of is to attach the old HDD to another computer, and then try to run the software in this way, but I don't want just the stuff on the old hard drive a copy to the other computer.

  Can anyone help?  Suggest how to get the old hard drive files, data, transferred etc. to the new computer.  What are the steps?

  Thank you.

  Do yourself a favor, with the old drive connected externally, in the browser, simply copy the data files to the location of Documents of the PC win7. You can not copy programs, they need to be reinstalled from media origonal. You can copy all the downloaded files instalation

  You may need to take possession of your old documents folders - see win help to find out how

• I stop using the computer for a few minutes. Then the screen of the computer turns off. Its does not sleep I need to turn off the computer then put into market and re - turn on the computer.

  If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer.  I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.

  You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?

  Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »

  And do the same for entries under Human Interface Devices (HID) device as Manager.

  Then restart...

• Windows 7 Windows Update doesn't load after installation of Windows 7 Service Pack Beta, then Outlook 2010 (Outlook 2010 has attempted to change Microsoft Update, after 24 hours, I rebooted the computer) and now, Windows Update does not work.

  Windows 7 Professional 64 bit

  Windows 7 Service Pack (so that I don't get a bunch of file wrong mistakes of corruption when using svn)

  Outlook 2010 (it works but I had to restart Windows forcefully during the first round as she tried to change the update settings)

  Now I can not install XPMode and cannot run Windows Update.  There is no error, no errors in the log of events, loading just perpetually for initial load of XP Mode or Windows Update.

  How can I fix Windows Update?

  In this forum, you will find support for Win7 SP1 RC: http://social.technet.microsoft.com/Forums/en/w7itproSP/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I downloaded an update and restarted my computer, received the blue screen of death shortly after the computer restarts. Now it does not start

  I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death.  with the details of error like:

  Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.

  I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode.  I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.

  Help!

  Thank you.

  So yes actually hear nothing helped me.  Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD.  Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive.  After doing this, I was able to do a boot repair, who led for the BSOD.  Not sure how that actually fixed, lost about 10 hours of my day.  So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.

  I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.

  Problem is solved, had to go back to a previous version of good boot where I have not install updates again.  Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.

  Nice day.

  Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

• The power of the computer is on, but it does not start

  After that I did memory ram change the computer won't start

  In this case, remove and replace the RAM that you modified.

  http://www.crucial.com/

  As soon as he is running again, use the Scanner from the link above to identify good RAM to install.

  See you soon.

  Mick Murphy - Microsoft partner

• my computer hp laptop window xp does not see his CD/dvd-rom after fomating of the system

  How to restore my CD-ROM/dvd-rom for my system again? This has happened once the system has been formatted. HP Windows xp

  Hello

  You receive messages or error codes?

  This can happen if the CD\DVD drive requires updates to the firmware or need to assign a drive letter for the same.

  Since you formatted the Windows XP system, you can check out the link to HP support and check if it helps.

  CD/DVD drive is not detected (Windows XP, ME or 98)

  Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  We can also refer to article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important: The article mentioned above, including the HP support article contains steps to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  How to back up and restore the registry in Windows XP

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• The computer's date and time does not change automatically

  I use WinsXP and have a problem with the clock at the bottom right. Every time I have on my computer the date & time is always 01/01/2005 12:00... Whenever I have to correct... Can you pls help me on how to solve this problem, because if the time if wrong my antivirus doesn't work...

  Original title: frustrating problem...

  You are in desperate need of a CMOS battery.  Read the manual or conteact the Lim for directions on how to replace it.

• Try to install flashplayer Adobie but the computer keep saying that it does not find this program

  I try to install a free version of Adobe, what am I doing wrong?

  Hello

  This can help you:

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• Windows Vista Home Premium does not start when I turn on the computer. Ctrl alt del does not work

  Windows Vista premium edition hung up in judgment and now I can't get windows to boot at all.  I just get a blue screen that says Windows Vista.  What should do?

  Hello

  You are able to access the menu start pressing F8 as soon as the initial POST ends and before Windows starts to load? If so, try the last known good configuration. Otherwise, follow the steps here to load the recovery environment: http://support.microsoft.com/kb/927525 and then run rstrui.exe to load the system restore. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• HP Pavilion 15-n259TX (two Usb ports on the left does not work)

  I recently lowered the windows note 8 for windows 7 and found that the two usb ports on the left side of my laptop no longer works, that is, they do not detect anything, be pendrives or external hard drive. Can you help me fixed the problem?
  My laptop is HP Pavilion n259TX 15.

  Hello

  Install the driver usb 3.0 on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64965.exe

  Kind regards

  DP - K

• 2 USB ports on the left side of my HP pavilion g6 does not

  2 USB ports on the left side of my HP pavilion g6 does not after I formatted my system, it detects all the devices plugged in these two ports, before operating system was family premium from Windows 7, but now he have professional window 7, what can I do?

  Windows 7 64-bit, install:

  Intel USB 3.0 Host Controller Driver