Pavilion hp2-1124: no power on the desktop

Came home after the weekend and there is no power. No light, fan, nothing. There was no indication of power problems before we left (strange noises, loud fan, flashing). The cord is similar to a cord high tower (external power supply) and I ordered a new, but if it is not the question that I do? I only got it for 2 years and if I have to return a new one I'll switch brands. A computer with a normal use should last more than 2 years if it is hardware issue. I had the same Dell desktop for 5 years.

I have orderd a new power cable and it still didn't work so I opened the tower and it ends up being the cable that connects the power button to the motherboard. Three of the sons had disappeared. Not quite sure how it worked in the first place, the son had been covered with tape instead of tape. He must have burned as nobody has been to cut the wires. Once I replaced this cable, it was fine.

Tags: HP Desktops

Similar Questions

  • Power on the desktop on demand.

    HII,
    I´d like know if in VMware View 4.6 exist option of virtual machine of power of a pool on request.
    Example: I have 10 virtual machines ready for use, and 5 user´s using 5 desktop computers, 5 other workstations are power off. When 6 user try login, 6th power supply Bureau on request.

    I know that have application for office supply power, I m right?

    Thank you

    It means how many workstations must be turned on and available at any time.   If you set it to 10, then you'll have 10 workstations powered and available at all times.

    If you are also provisinoning on request and you have less than 10 workstations available for power but have yet to hit your max he would provide new job positions until you hit max.

    If you put in service all desktops to the front then he would simply feed their top and bottom depending on your use.

  • Pavilion x 2 detactable: power off the touch screen

    I want to use my laptop / Tablet drawing and illustrations. I wanted to turn off the touch screen so that I can use it to make drawings with. Any help would be apprecated. Thank you

    Hi @DarrenPendrey,

    To disable the touch screen, use the following steps:

    1. open Device Manager.

    2. expand the section Of Interface devices .

    3. right click on touchscreen compatible HID , and then select disable.

    4. click Yes to confirm.

    To reactivate the touch screen, repeat the steps but select enable in step #3. You may have to restart the computer.

  • Cannot connect at all on the desktop, but XBOX and laptop.

    Desktop has been updated Friday. Cannot connect since then. XBOX, portable, Blu - ray easily connect. One office has Firefox. All others connect through a wireless router off the power of the desktop computer.

    -> Press and hold ALT, or press F10 to display the Menu bar

    -> Try the following and what that either configuration works, keep it Permanent:

    (1) go to the Menu Tools-> Options-> advanced-> network-> click on the "Settings" button... "in front of connection-> select option 1-> click OK-> OK

    (2) go to the Tools Menu-> Options-> advanced-> network-> click on the "Settings" button... "in front of connection-> select option2-> click OK-> OK

    (3) go in the Tools Menu-> Options-> advanced-> network-> click on the "Settings" button... "in front of connection-> select option3-> click OK-> OK

    Check and tell what solution works.

  • Sudden closure of power during the uninstallation of Photoshop elements 11

    Hey all! I was just on the trial of the 11 Photoshop and then I uninstalled it. White it was uninstalling, my PC power to close, I want to say that electricity has exploded. It was like half uninstalled when the PC has lost power. The desktop icons and the start menu icons is gone. I manually deleted the entire folder "Adobe Photoshop Elements 11". I guess there are a lot of things to uninstall again, isn't it? The entries to registry and stuff. So please tell me how to do it.

    Thank you

    Amal

    Hello

    Operating system that you are running on?

    If Windows, the following should help.

    Manually remove Photoshop elements 11 | Windows

    Good luck

    Brian

  • Pavilion 550-a137c: power adapter for desktop Pavilion 550-a137c

    Hello! I need a power adapter for desktop Pavilion 550-a137c. It requires an x 64 watt, v 11 b with a special plug adaptor. Where can I get one?  Thank you!

    @Jbgss, welcome to the forum.

    Because the computer is only a year old, you should be able to do it here.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • When the battery works fine. When the power adapter is pluged into the computer will be boot & when the desktop appears on the screen go blankin seconds. computer is still on, but nothing on the screen.

    I have HP Pavilion ZV5325 with windows XP. When I start the computer with the battery power only everything seems to be okay. When I plug the charger (HP part #316688-001 power AC) start of the Welcome screen comes on, but when the desktop appears that the screen turns off after a few seconds. The computer is still following this timje, but with a white screen.

    Hello

    ·        Happens before? Since when are you facing this problem?

    I suggest to reset the power of the system options and check whether the problem is resolved. Follow the steps mentioned below.

    a. click on Start menu and click Run.

    b. type cmd in the run box, and then press ENTER.

    c. type the command which is given below.

    powercfg /RestoreDefaultPolicies

    I suggest you to update the BIOS and see if the problem is resolved.

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Can I put the Pavilion Slimline 180 Watt power supply to a 300 Watt PSU

    Of course, you can!

    Here is an informational videoabout the possibilities of upgrading your slimline WHAT PSU found on YouTube.  A comparison of three power supplies, including the owner HP PSU and a (two video and CPU) stress test and comparison of noise is shown during the video.

    Be aware that some, but not all, of the PSU, upgrades require a simple and light your PSU slimline support change. Change depends on the power supply model chosen for the upgrade.

    Purchase an adaptor molex as HP UPE is necessary for the Slimlines using a power supply with the format owners microfit ATX 24 pin, as well as the standard for the HTPC power supply ATX 20 pin format.

    Upgrade your power supply at a higher power will not damage your motherboard. A power supply will provide only so much power that is required of him by the mother and peripheral card up to the nominal power of the installed PSU.

    It is for those who wondered how to work around the limitation of the low power 180 Watt power supply that most Pavilion Slimline PCs come with the Assembly. With a power SUPPLY improved, more memory and a graphics card discrete, including support (it is a requirement) your Slimline can be your gaming PC.

    Selecting a graphics card is another topic. Not all graphics cards can hold in the case of a slimline. It takes a low profile video card. They are available for purchase online.

    Kind regards
    ERICO
    Published by erico on 15/11/2009 13:17

    Bravo for Erico 1,000,000,000. Great post. Debunks many myths and the hearsay rule.

  • no power to the Pavilion m7650n

    I have a Pavilion m7650n I bought 3 years ago.  When I went to put on today, there was no power to the switch (no blue light).  The green light on the power supply is on and I have confirmed that there is 110 VAC of the cord to the power outlet. This computer has the fuses - I have found none.   I suspect that food left.  Is there an easy way to confirm this?  How is it difficult to replace?  I have extensive experience in collaboration with the equipment electronic and am comfortable performing hardware repair/replacement.

    Thank you!

    Try this procedure and see if you can locate the problem. Troubleshooting problems of energy supply. Do not skip steps.

    The procedure below can replicate some of the steps above:

    Disconnect the PC and open it. Clean all the dust. Carefully, remove and replace all the cables towards the mother board one at a time. Do the same for memory DIMM and the video and the sound of cards if you have a.  You can buy a can of compressed air to blow the dust out of the heatsink from the CPU.  Plug your PC back in and give it a go.

    How to replace a power supply.

  • Desktop HP Pavilion 500-342nem: can I upgrade my desktop computer hp pavilion 500 with the graphics card AMD RX 480 replacing edge R7

    I plan to upgrade my hp pavilion 500-342nem, who was already A7 graphical 240 with the new 480 RX.

    Is it possible to upgrade both the power supply and graphics card?

    There will be no problem of compatibility (PSU Corsair CX 500 questioned?.)

    I heard a lot of chatter on hp restricting the upgrade of their pc.

    The new card will work?

    Any help will be apppreciated.

    @Jeffrin98, welcome to the forum.

    I cannot find the specs of the product to the computer.  So, here's what you need to do.  Press Start + R from the view of the office.  This will open a run dialog box.  In the box labeled type msinfo32 opened.  In the page that opens, check the option titled Mode BIOS.  If he says UEFI motherboard is supported by the video card.  If this isn't the case, you will not be able to move forward.

    The next step is to measure the space where the card will be installed to ensure that it fits.  Measure from the back i/o port to the front of the case.  This will allow you to see if other ingredients will limit the installation.

    The CX500 Corsair power supply (PSU) should work.  However, check how much power requires the video card.  It may be better to buy a PSU with 600W.  High power will be used during peak power needs.  In addition, the card may require additional power connectors.  Also, I recommend a modular power supply.  It allows you to use only the cables that are absolutely necessary, create better air circulation.  It is very important with more powerful graphics cards.  The heat can be much larger.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • no power in the m9426f Pavilion

    My pavilion m9426f has no power of this am. green light is constant in the back. T - storm last night although I always suspect power supply - can I still be food? I tried everything backwards & forwards

    This has been fixed! I just took a food of $50 at best buy. I guess that even if the green light is steady, it may still be food - thank you!

  • is it possible to restore the shortcut icons on the desktop on entrtainment Pavilion dv5?

    Is there to restore the shortcut icons on the desktop on a computer pavilion laptop dv5 with widows 7?  I don't know with certainty what I did - I am 75 with an earthquake - but maybe a uncontrolled double click right while on the desktop.

    In any case, all the desktop icons disappeared in one shot!

    I have not rebooted - no joy!

    Hello:

    Try the system restore utility. Which should return just as you wish.

    Here is the link on how to run the system restore if you have never done before.

    http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

    Paul

  • downgrade to windows 7 64-bit on the desktop hp Pavilion p7-1534

    I need drivers for the upgrade to windows 7 64-bit on the desktop hp Pavilion p7-1534

    Hello

    It is not recommended to decommission a Windows 8 UEFI active PC.  However, the drivers for this HP p7-1297 c PC should work.

    You also need to make changes to the bios.  Review of this article.  Enable and disable the secure startup and quick start if activated.

    Under the DIRECTION of correct errors.

  • What is the maximum power for the hp pavilion a6650f food?

    Hello

    I have a HP Pavilion a6650f running Windows 7 64 bit os. I want to uprade the power. What is the maximum size for my machine?

    Thank you.

    The largest PSU that you can install is a power supply that fits in your case. Is that you can install a 500w unit, unit of 700w. No matter what the power of the PSU is... What matters and is that the limiting factor is the size of the PSU pyshical. Measure the size of your existing plant of PSU and notice the space between it and optical drives... If you get a power supply which, for many, optics and PSU players bump into one another.

    Frank

  • What is the button just to the right of the button power on the Pavilion laptop?

    What is the button just to the right of the button power on the Pavilion laptop and what is its role?

    Hello:

    Here is the link to the maintenance and care for your laptop computer guide.

    http://h10032.www1.HP.com/CTG/manual/c03043778.PDF

    Please see Chapter 2, pages 11 and 12 show the buttons and label them. The button to the right of the power button is revealed to be a button to launch the web browser.

    Paul

Maybe you are looking for

  • Why do I get the error Code 0 x 80010108 on Windows Photo Viewer?

    Why do I get the error Code 0 x 80010108 on Windows Photo Viewer?

  • HP Deskjet 1050 410a

    When I print a page, the print is so small. It is difficult to read. How can I change the size of the font on my printer?

  • Permissions are mesed up. Need help to fix it.

    Somehow, the permissions on my machine Home premium windows 7 is all messed up.  Several programs do not work now because of incorrect permissions on a directory on the system. It showed after a system restore.   I managed to add permisions writing f

  • store integers in a persistent storage

    Hi all - I'm being a key on this one I don't know. The SDK V5. Have a persistent storage object that contains an integer. If its creation as: persistentHashtable.put ("GPRSUpdate", New Integer (180)); in a few seconds Now have an editsettings (behind

  • why I have a problem with the first?

    Help!I've recently updated my OS X to El Capitan after that, when I stop my script, my preview and the program looks like this (attached image)Is there anyone else with this problem? How can I solve this problem?