Pavilion HPE - 533 sc: installed new graphics card. Hard drive stops

Similar Questions

• HP Pavilion HPE h8-1222: HP Pavilion HPE h8-1222 cannot find graphics card GTX970

  Hi I have a HP Pavilion HPE h8-1222, ReadonHD 7670 graphics card there if I bouth the computer. The craphic map is made and I bouth a new GTX970 of Zotac. I noticed that I need a new power supply and bouth Smart650W from Thermaltake. If I put the new installed in the system will not boot I get piep short (as if you just starting your pc) pause for 20-30 sec piep break new piep break again and pieps short 3.

  1-1-1-3 short.

  what I ludivine is too I can't go in the bios system if the card is in.

  the fan on the card everything is beautiful try my card by a friend and who has worked with him read a little and try to update my bios have immediately communicated FRIEND 7.12, 10/12/2011

  Here in hp, there is a newer version, I try to install that but nothing is happaning. The installation will tru and the system tells me the installation is done but nothing happens.

  Can anyone tell me how I can get this to work.

  Thank you

  Schmatrix, welcome to the forum.

  The problem you are having, it is that the video card requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released in February 2012.  You must contact the Technical Support of Zotac to see if they have a VBIOS update that will solve your problem.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• No Signal after installing new graphics card

  Hello and thank you in advance for your help!

  We have a 2 years old HP p6540y.  It has an ATI video card integrated. When we recently turned on, we got a message "no signal" on the monitor and then he'd go to sleep.  We tried many things to fix... listed below, in order and are always the same message.  Please advise!

  (1) No Signal: DVI, VGA, HDMI.  So we unplugged and rebooted, no change.

  (2) checked monitor and DVI & VGA cables with another computer: they all work.

  (3) installed new graphics card: NVIDIA GEForce GT 610.  Still got same message "no signal".

  (4) we plugged/unplugged all the other cards/cords / no matter what we could and cleaned.  Then, finally, the monitor turned on! But not for long...

  (5) after you restart the computer after installation of the graphics card driver, we got the 'no signal' message again.  We released once more, other cards/sheets and again once the monitor and the computer came to life.

  (6) we uninstalled the ATI integrated graphics card.  When we go to display, Advanced Options, he mentions our new NVIDIA as graphic/video card.

  (7) we turned computer off during the night and this morning when we have lit, we once agin got the message "no signal".  We have unplugged/plugged computer several times.  Also tried the trick with cards/plugs by pulling and we have nothing.  No Signal.  After doing this several times (about 10), he is finally working again.

  (8) we changed the sleep settings to: screen saver = never; Standby mode = never.

  (9) we restarted again to get once more no signal message.

  So... what should we do?

  Thank you very much!

  Triusa, welcome to the forum.

  I think that your problem is caused by the power supply unit (PSU).  Here's a guide to help you solve the problem:

  http://support.HP.com/us-en/document/bph06788

  Also, the existing PSU is 250W.  The 610 GT requires a minimum of 300W.

  If your problem is solved, please click "accept as a Solution.

• Stuck on the HP logo screen after installing new graphics card.

  I installed a new graphics card today and I'm stuck in the loading screen. My old card boots gts 450 my computer very well, but my new graphics card cannot. I replaced my old diet with a 600w power supply, and it worked fine with my old card.

  It's my computer HP Pavilion h8-1210 = http://www.amazon.com/HP-Pavilion-HPE-h8-1210-Desktop/dp/B006VG0HNM

  I tried to install the latest version of the Bios with no luck. I guess it is the motherboard, but I'd be happy to work around that.

  Danny

  metall909,

  If you use an EVGA 760, so your question is probably a vbios into the video card.

  HP PC delivered after November 2012 are pretty good at speed on the last level of UEFI version. This level begins to version 8.

  I met problems with EVGA 760 UEFI and ASUS claims it is a vbios video card problem and EVGA says this is a motherboard problem.  I would not recommend using this card until EVGA releases an update of the vbios.

  If you are in a situation of pointing finger between HP and EVGA.

• Windows 7 Installation stuck after installing new graphics card

  Before that, my office is fully compatible with Windows 7, but after that I installed a new graphics (ATI Radeon HD 5450) I can't install Windows 7, when I started to install that everything seems fine, but after it restarted and end Installation it just stuck there!

  Any help?
  I tried to remove the new graphics card and the use of the onboard graphics to install Windows 7 still does not work?
  NOTE: I used Windows XP before installing the new graphics card.
  I'm using Acer Aspire M1800
  CPU: Intel Pentium E6300 processor
  Memory: 2 GB DDR2
  Help appreciated
  -Joey

  Hello Joey

  If right now you go back to Windows XP and the system is slow correct? You have the drivers installed since you went back to XP? If not then click here and select your system. This will bring up a list of available drivers for you. Also, I've included a link below to get the drivers for your new video card. My problem with the question is if your system has enough power to support the video card. Here are the specifications of your card. Check the configuration required for the map and you ensure that you have adequate food. Let me know if it helps. Thank you.

  ATI Radeon HD 5450 Windows XP Drivers

• No sound after installing new graphics card

  Original title: sound problems, this can be confusing abit.

  OK, so today I have installed a new graphics card, NVIDIA, comes with 2 VGA Plug ins and a MiniHDMI.
  Once I installed it, my sound thing said, exit No Audio is installed, so I reinstalled it, but for some reason any... He sends the sound via HMDI cable, but I did not! I used to have "Realtek HD audio", so I went on the website to download, got one, but has no effect! Please help me!

  Too bad... It's okay now, thanks anyway, I got it to work.
  PS, I never siad anything on an error message.

• No audio after installing new graphics card

  I recently installed a Geforce 8800 gt xfx graphics card. After you install the graphics card, I have more audio analogue. My computer does not detect the analog audio devices. Things I've tried: reinstalling the drivers chipset audio activation built into the bios bios reset CMOS reset reinstallation Editing registry. PC specs: http://support.hp.com/us-en/document/c02628226 (Note: all specifications listed are correct except the video card and power supply) voltage is the 450w graphics card: http://www.newegg.com/Product/Product.aspx?Item=N82E16814150280

  Yes, it is possible, that there is an overload.

  The solution is to get a sound card not cheap, I think.

  One that works with everything what add on slots (PCI/PCIe x 1) you have.

  Then get a Radeon HD6570 (didn't need additional power supply), or some other card Radeon HD if you wish.

• HP PAVILION HPE h8-1192d: could not start after installing new graphics card

  I recently bought a Gigabyte GTX 750 Ti Black Edition to replace my old. But it will not start after installing on my h8-1192d, and stuck on the screen flash hp. Help, please!

  Hello

  NVIDIA GTX 7xx or 9xx series graphics cards will not work in your PC.  The BIOS in "chicago" mothererboard is not compatible with the video BIOS in the graphics card.  You will need to get an older card chart such as the one of the below listed OEM HP graphics cards. Depending on the graphics card, you may need to replace the power suplly.

  

• HP Pavilion P7-1155: Installation of new graphics cards hp p7-1155

  I have a new EVGA GEFORCE GT730 2 GB GDDR5 graphics card and am ready to install it in the box above.

  Haggiscat suggested this card through a previous post on this site. I printed the directions of installation of help from hp and I so the mechanics of the installation of this thing. These directions say disable the first onboard graphics card, then go into the box and install the new card. My question is: do I need to do something else first as in downloading the driver first / delete the old driver first.etc? Also, I have a disc that came with the new card. Use that to get the drivers or go to the website of invidia? I want this facility to go as gently as possible so expert help would be appreciated.

  I don't know how to direct you to the previous post, but it's in this section. Take a look for general information.

  Thank you

  I did some research after that discover your graphics update did not work.  I found another thread in which the motherboard is the same as the one you have and the video card is in the same family as the one you bought.

  http://h30434.www3.HP.com/T5/desktop-audio-video-monitors/installing-a-GTX-770-graphics-card-in-a-HP-Pavilion-P7-1047C/TD-p/3227997/page/2

  I also see in other forums that the 720 thru 770 cards are not compatible with this motherboard.  I have not found a referenced compatible card.  A resolution has been accomplished by changing the motherboard.

• HP pavilion HPE-H8-1212: power upgrade graphics card is it useful?

  I currently have a HP pavilion HPE-H8-1212 with an AMD Radeon HD 7450 card with the standard power supply provided with the computer.  From now run many games on this machine with what graphics settings be better then adverage is a sad screen.  I don't need the best, but I was wondering if I could spend my power supply card and graphics mabye if need be to get the best out of this small computer for gaming?

  Does anyone have suggestions on what chart cards (best I can go) that are compatible with this machine as is?

  And/or what power upgrade level to if necessary to install a better graphics card - and which cards would be these (even better cards that would work on this machine)

  Thanks for any info

  Follow the advice given by Big_Dave Expert HP in the following thread.

  http://h30434.www3.HP.com/T5/desktop-hardware/HP-Pavilion-HPE-H8-1212c-graphic-card-compatibility/TD-p/3820114

• Pavilion HPE H9-1130: install the firewire card correctly into the slot of the motherboard correctly

  Hello, for my HP Pavilion HPE H9 1130, how to install the correct firewire in the motherboard slot card OK in OS Windows 10 x 64 / x 64 processor? And what video software system can I download to recognize my Panasonic 100a camera AX?

  Thank you. Followed your instructions. And it worked perfectly. Thank you. Even if I have Adobe Prem Pro, I downloaded MS Director and put 9 drivers after installing the PCIe card. Then it worked perfectly to capture video from a FireWire camera. Thank you once again!

• HP ENVY PHOENIX h9-1355: hard drive not detected after installing new graphics card?

  My computer at starup tells me that it cannot detect my hard drive after installing a new graphics instead of my old card.

  The news is ASUS GTX 960 old Turbo was AMD Radeon HD7770.

  Can someone please help!

  Please, I beg you!

  See your other post.

• Get the 43 pilot error after installing new graphics card

  Original title: graphics card problem

  Help, please. I just put in my new nvidia Geforce GT 430 graphics card. It came with a disc that would install all necessary records, when the computer has restarted a message says that the driver has been arrested because of his mistake, 43. I don't know what to do to solve this problem. just in case my processor CPU Intel Celeron D 3.33GHz and has a 32-bit operating system. What should I do?

  Hello

  / Settings (BIOS/CMOS) often F2 as you start so watch the display as you start
  the computer. You may need to check with the system manufacturer (Motherboad support
  If a system custom Maker), their documentation online and drivers and ask for their
  Forums (if any).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• blue screen after installing new graphics card

  Just install my new geforce gt 240 to replace my 9400gt. After reinstalled vista driver & restart, my system to start start then goes to a white screen for 2-3mins fight & displays a blue screen quickly and then restart & repeat once again. Vista will boot into safe mode without problem & also start normally when I reinstall my old card. my system is fully updated & all drivers are up to date.

  A way to solve this problem

  Thank you very much for the help, discovered that the graphics card was defective. Tested my friends GT 220 card in my system & installed without any problems. Anyway, I picked up the card & brought a radeon HD5450 instead, installed without a problem, then I say problem solved.

  Thanks again wb2001

• HP Pavilion p6754y Desktop PC of new graphics cards and after custom computer installation starts.

  AMD Athlon (TM) II X 4 640 processor 3.00 GHz 4.00 GB of RAM (3.75 usable) 64-bit operating system.

  I tried installing Nvidia Geforce 8400 GS hardware. If the hardware is installed, the computer lights. Start button / stop does nothing inside of the activity is a light on the motherboard. also on the back of the power supply light when plugged in for the first time but stops after you press the power button / stop. on the motherboard remains lit. but it's the only activity. also computer work very well after the removal of material. Maybe it's a bad graphics card or insufficient PSU? I also tried to install the Nvidia drivers, but they moved it not unless the equipment is installed. Help, please.

  Hello
  The unit you only comes with a 250W power supply (PSU). http://support.HP.com/us-en/document/c02628380

  For the graphics (GPU) card you want, I recommend at least 350W because the GPU will draw 71W according to nVidia (http://www.nvidia.com/object/geforce_8400_Gs_faq.html).

  Here is a video on how to to replace the power supply: http://support.hp.com/us-en/document/c01684432