Pavilion laptop dv6: want details about the cooling fan problem

He showed when ever I start the laptop like this,

the system has detected that a cooling fan does not work correctly.

System fan(90B)

so please give me suggestion what to do with this problem in a way it requires to change the fan or the amything else.

Thank you

Verdier

Your Service Manual:

Manual

You have an i5 processor and 1 GB dedicated video, so it's your cooling fan:

For use only with the computer models equipped with an Intel processor and a graphics subsystem with 1024 MB memory discreet 665308-001

P. 83 of the manual start instructions on the replacement of the fan/radiator.

http://Geb.eBay.in/g/ImportHubViewItem?Itemid=121230548704 & CPU-FAN-Heatsink-for-HP-Pavilion-665308-001

If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Tags: Notebooks

Similar Questions

  • Pavilion Dv6: Replace the cooling fan

    I need to replace the cooling fan. Please provide the manufacturer for notebook described below.

    Pavilion Dv6-6135TX

    Product # QC328PA #ABG

    Processor: Intel Core i7-2630QM CPU @ 2.00 Hz

    Installed memory (RAM live): 8.00 GB

    Thank you in advance!

    Dear customer,

    Please try the steps below to determine the size.

    1. Open the control panel.
    2. Select display.
    3. Select the screen resolution.
    4. Select Advanced settings.
    5. Select the map tab. Here, you'll see how much of total graphic memory available with dedicated video memory is available on your system.

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the white button on the right to say thank you Thumbs Up *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    GBL84

    I'm not an employee of HP

  • gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the macbook pro battery retina start

    gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches

    When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.

    It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...

    Appreciate any help on this

    Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support

  • I run vista on my laptop, but want to play the old games that need XP. Help, please!

    I run vista on my laptop, but want to play the old games that need XP.

    I was told on the microsoft site a xp free download that you can run on the computer next to vista (when the computer starts, you have possibility to xp or vista to run) to play with older games in this regard.

    Is this true, if so where can I find it? Help, please!

    Hello

    You think for Windows 7 XP mode.

    This is how to do it on Vista.

    "Using Windows 7 or Vista Compatibility Mode.

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

    "Make older programs run in this version of Windows".

    http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

    See you soon.

  • I would like to know the details about the license of Windows PE, terms and political Conditions of Redistribution.

    Political pe Windows license, the terms and conditions of redistribution

    I would like to know the details about the license of Windows PE, terms and political Conditions of Redistribution

    For more information of WinPE 2.0, you can consult the following articles:

    http://TechNet.Microsoft.com/en-us/magazine/cc138016.aspx

    http://TechNet.Microsoft.com/en-us/magazine/cc160884.aspx

    http://TechNet.Microsoft.com/en-us/windowsvista/aa905120.aspx

    J W Stuart: http://www.pagestart.com

  • need help on my pavilion DV7 enter the case to replace the cooling fan.

    I the new fan and have removed all the screws that I could find, removed HARD disk Memmory and removed all the screws, how the case apart?

    You can pass by the maintenance and Service guide for the computer laptop dv7 and find out how to replace the cooling FAN. Please be aware that void you the warranty by yourself.

    http://h10032.www1.HP.com/CTG/manual/c02638165.PDF

  • HP Pavilion p7 - 1027c: do I need a cooling fan upgrade?

    So I'm going to buy a new graphics card, the Geforce GTX 750 ti and a new power supply 430 Watt. Given that my cooling fan computer stocks is built for my computer which runs on 250 watts with integrated graphics, simply to cool my new card and power supply? Or I have to buy a new cooling fan? If I have to buy a new cooling fan, please give me a suggestion for one that fits my needs at the lowest possible cost.

    There is no magic formula to decide if you need more air.   But here are some thoughts:

    1. not hot or the high unity now?   We you actuallly measured the temp or are you just guessing?

    2. most of the more recent scorecards have cooling fans on board to manage the GPU.

    3. the upgrade a fan with a better fan will supply minimal additional coling...

    (Regardless of what adds it to say about the new fan...)

    So what to do if you need a cooling more...  A few ideas:

    1. get a greater power than you have planned...  If it is running at well less tha it's capacity, it will produce less heat.

    2. download power supply with double oversized fans.  These fans will draw birds from inside the case to cool the power supply and send

    out of the case.

    3. ADD THE FANS.  Some cases have not used to install a fan.  If this isn't the case, you have options.  If you're handy it is not difficult to

    the case mod to accept another fan or two.  Not interested?  You can buy kits to assemble the 2-3 80 mm fans - 90 mm

    together and installed in a slot...  This can be very useful if your video card IS causing excessive heat.  You can

    install the fans just beside the video card to ensure the direct cooling.

    That being said...  I want to first make sure your upgrade is actually to create too much heat.   It has most of the manufacturers to produce products of course there will run cool and effective.  I install the card and check the temperature before proceeding to additional surgery.

  • Satellite A30-514 is very slow and how to repair the cooling fan

    My laptop is now very slow. Power on the need to use F1 at startup and it is also quite the slowness of the process. My machine has 512 MB of RAM, but shows only 480 MB on Control Panel. It is believed that it's a RAM failure that made the slow machine or something else. I tried maintenance but did not help.

    Also any what has got the details how you can open the unit up to service the cooling fan as the machine heats up a lot and need a maintenance operation.

    Thank you

    Janak

    Regarding the problem of slower. Perhaps?

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15340

    Concerning the problem of heating. Perhaps?

    This can help because it shows different disassembly guides model hough, she did not directly mention the A30. He mentioned a problem of heating with an A35.

    http://www.irisvista.com/tech/index.htm

    You should take note of this warning on the page well!

    Quote
    "WARNING!" Do not disassemble your laptop if it is still under warranty because it will void the warranty of the manufacturer of the laptop. I am not responsible for any damage you can cause to your laptop.
    End of quote

  • the cooling fan blades began in friction with the DV8342 model cases

    The cooling fan blades began in friction with the case on the DV8342 model. That's pretty much all... I moved by typing possible positions. I shook the h * he's out of it simply to throw on the floor. I've been a consultant SAP... built my first full flight computer "Fairness of the Epson" in 1982... hard drives had not been invented for PCs yet.

    Sorry for the hike, but I wanted to create my knowledge of pc s until I am bombarded with a lot of people think that they are contributing by asking "is there a piece of paper stuck in there. Just to clear these issues... nothing is stuck in the fan what so ever... it's more like plastic veiled.

    And of course this model I can't find an easy way to access the fan... next to break the cooling slots in the case of.

    Hello

    Check with HP support, their documentation online and ask in their forums.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    Reduce heat and the fan noise by cleaning the air vents
    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01657439&LC=en&cc=us&DLC=en

    How to replace the fan in an HP laptop
    http://www.ehow.com/how_4557146_replace-fan-HP-laptop.html

    I hope this helps and happy holidays!

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • HP Pavilion g7-2200sa Notebook: disassembled and cleaned cooling fan but still does not

    Hi guys,.

    A few days ago my cooling fan packed in and my laptop closed indicating a 90 b cooling fan error.

    I have disassembled the laptop, removed the fan and clean all the dust from the fan and the exhaust gas (there was a good amount in there, the exhaust seemed quite blocked upward).

    Him having moved up the cooling fan still does not spin. What should I do next? I am happy to buy and adapt a new fan but wanted to be sure that would solve the problem?

    Thanks for your help

    Hey guys,.

    Incase anyone is interested. I bought the new blower for the sake of £6, he set up earlier and it works fine.

    If you plan to try it yourself, I had never taken apart a laptop before, I watched some videos on youtube and then for what he

  • On the cooling fan

    Hey you...

    Recently, my Hp laptop was an error message that the cooling fan is not working corretly. And sometimes the fan not turn...

    Thank you

    Thanks for the reply! I was able to locate a document specific to your problem troubleshooting: System (90 b) startup error message fan

    This document lists the exactly steps to solve the problem. If the procedure does not work, the cooling system is probably broken. I would be right there, contact HP support for material assistance.

    You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

    Please let me know if you have any questions or concerns. Thank you!

    Mario

  • How to disassemble the Qosmio E10 to replace the cooling fan - need manual

    Does anyone have instructions on how to disassemble the E10 to replace the cooling fan. a G25 irisvista.com all the other models, but the design is not the same.

    Now stuck at removal of keyboard connector.
    No idea what fan model numbers so I can order before the band down.

    Hello

    Unfortunately, it seems that there is no information on fan replacing on the laptop of the G10. These documentations are not for public use, but only for the Toshiba authorized service providers :(

    Apart from this fact it s not advisable to disassemble this laptop if you have no experience! During the disassembly process, you could damage the motherboard or something else

    So I think that he of better go to a technician because he has more experience.
    In addition, the taken cooling module supported and compatible can be ordered from the Asp in your country

    have a nice we

  • Re: Tecra M11 sudennly freezes and the cooling fan starts to run

    My Tecra M11 laptop is running Windows7 and with a broadband dongle Telstra wireless internet lights up and works normally for a period of time.

    Sudennly it freezes completely and 5 seconds later the cooling fan starts to run until I power off using the power button.
    Clues?
    Thank you

    You must understand that on this virtual path, it is not easy to say what the problem is here.
    I can imagine that some background process starts and increase the use of the CPU at the critical level when the motherboard sensors register at higher temperature of the processor and cooling fan starts to run fast enough.

    Try to check in the Task Manager, if something like that happen.

    I put t know how you have configured your operating system and to applications that run in the background, but also to try to stop treatments that you don't need and change some settings.

  • Satellite C660-1st - replacement of the cooling fan

    Hello

    I have a Toshiba Satellite C660-1st. Last days a cooling fan start working very noisy doesn t and cleanup help. I bought a new Toshiba L650 but it s not working do not. This laptop cooling fan seems same as from my computer, but the order of the wires in the plug is incorrect.

    Colors are the same so I tried to change order of the cables but it helps doesn t.

    Any ideas how I can fix the problem?

    >... a cooling fan started working very noisy
    How to understand this? Is noisy to say that the cooling fan can be defective and make a few strange noises or it works simply more often than before?

  • Equium A60-155: replacement of the cooling fan

    which screws can I remove to access the cooling fan if you please. (Equium A60-155)

    Hello

    Unfortunately, don t find all documents on the fan to replace procedure, but in my opinion it should remove much of a screw covers.
    This procedure is not easy and if you don't have any experience you shouldn't t remove anything.
    By the way; If you remove the cover, you will lose the warranty.

    In this case, the best way is to contact Toshiba service in your country for assistance and more information.

Maybe you are looking for

  • Migration of all files to new Mac

    I will receive a 2015 iMac refurb. My current computer is a Mac Pro 2009. Two Macs will have installed El Capitan. I have a Time Machine backup and a Superduper clone available on external drives. When I launch the new iMac, I'll copy all the files t

  • A30 w/ATI Mobility Radeon graphics adapter use Shader Model 2?

    I have Windows XP sp3 on my A30. Try to install something for my son, but he says that it is unable to run because it requires a graphics card that supports Shader Model 2. Are there new drivers that would work?... is .or impossible for me to hope fo

  • Setting recovery partition

    I have hp dv6-3037tx I recently installed a new motherboard in my computer. Since then, I was not able to boot from the recovery partition. For example, I press F11 at startup and nothing happens, it starts just directly to the Windows 7 Home Premium

  • VM - FEX on UCSM managed C series

    All, Can someone tell me if this is supported and if yes where VM - FEX the drivers can be downloaded from. All the documentation seems to suggest it is possible, but when I download the ISO C series drivers, no VM - FEX directory is found. Download

  • 802.1 x and client config

    Everybody deploys 802. 1 x in an environment of Win XP/Cisco wired? I'm mainly interested in bugs/problems, and if the client 802. 1 x XP will be transparent pass through the credentials of each connection AD. Also, how should it treat Active Directo