Pavilion Office HP500 - a60: UPDATE the BIOS

Similar Questions

• Satellite Pro A60 - update the BIOS without OS

  I have a Satellite Pro A60, trying to install XP pro but says he needs the BIOS update, downloaded the new update, unzipped and that one file, will not start until no bootable files.

  There is currently no OS on the laptop, I understand that I need an ISO file but where is she... !...

  Hello

  Why you need to update the BIOS?
  I doubt that XP installation says that you need to update.

  Normally the update of the BIOS is a bit risky and must be that if she of really necessary. In addition the update of the BIOS can only be done from Windows. There is no DOS version, they available only authorized for service providers.

• HP Pavilion 15 - ac 179tx: update the BIOS

  the BIOS update software is downloaded successfully.  The installation starts but never ends.  I left the facility to operate more than 3 hours and never finished.  I had to stop/cancel the installation attempt. -Why not install? What should I do? Should I intall this manually for my laptop and try to install this way?

  Hello

  You try to update the bios with HP Support Assistant?  If that is correct, can you post back with the number of MS in the update (it will be in the form spxxxxx).

  Kind regards

  DP - K

• HP Pavilion laptop PC 15: update the bios

  Product name: HP Pavilion 15 laptop

  Product number: G8D81PA #ABG

  Serial number: [edited by moderator serial number

  8.1 Windows 64-bit

  I tried to apply the update to the BIOS F.16Ap1, Soft Pack no. SP69882. I did this on the advice of the HP Support Assistant. He also recommended updates for Cyberlink Power2Go and Cyberlink YouCam software. It seems that these two updates are working.

  The first time I restarted the computer it came with the error screen saying there was a problem and he tried to fix it. This happened twice. Then a screen appears that had a number of options, including "Restart" and "try to solve the problem." I chose "shut down the computer.

  I left the computer off for about 5 minutes.

  To restart the computer in the HP Support Assistant update message was still there so I tried again. This time the procedure seems to flow normally. The computer rebooted and everything seems in order. However, the HP Support Assistant says even the BIOS need to be updated.

  I was not looking to shut down the computer, or remove the external power source, while the update was underway.

  How can I get the update to work properly?

  @Guillem0355

  Good then, for this model the right page is this.

  HP Pavilion n218ax-15 Notebook PC - software & drivers

  And Yes, if it is to show that the version of the BIOS, HPSA now so you should be good. Remember what I wrote before, on how to roll back your version if you must, but from the sounds of things, it should not be necessary.

• HP Pavilion Notebook - 15-p206: WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10

  Hello
  
  WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10.

  Update driver BIOS update effective system is rebooted and the wifi does not.
  
  Please help me.

  In the box to Ask Me whatever it is next to the Windows icon, type in "Installed updates", and then click view installed updates.

  Select the update that is dated from when you had the question.

  Click it to uninstall.

  You have to restart the laptop afterwards.

• HP Pavilion dv4-1120br: doubts about the BIOS update for my model with the operating system current instaled.

  Hello

  I have a HP Pavilion dv4-1120br, I know that this model of HP laptop is old, but I instaled the 64 bit of Windows 10 on my machine and saw that my BIOS is version F.30 and the last of them available on the site of HP F.66 has.

  The problem is that this model is not suport for Windows 10 because, as I said, is too old. Can I download and run the update of the BIOS for Windows 7 64-bit available in the Web site, or I need to downgrade my OS to Windows 7, update the BIOS and then pass it back to Windows 10?

  Thanks for the help!

  Cantarino

  Hello;
  
  Let me welcome you on the HP forums!
  
  Your second proposal is correct - as the updates to the BIOS on the HP site are specific to the OS version and if you try to run one for Win7 in Win10, it will refuse to run.

  Good luck

• Error when updating the Bios Equium A60-155

  Hello.

  Here, I have TOSHIBA Equium A60-155 MODEL No.: PSA67E - 00300C8J

  "I tried to update the bios, follow this thread" [http://laptopforums.toshiba.com/t5/Drivers-and-Utilities/Equium-A60-BIOS-Update-Problem/td-p/99434] ".

  but I got the error, as in the screen:
  [Photo: http://qgwbrw.bay.livefilestore.com/y1pZJ7VOj2nrffkqrqlCXuwOHdILOPKPqWuCT0i3MoAuv6p5QR k1WSwQm3APFZIodBVIdL807fC_a_RAYR79W1XqWSpSh5x9cVw/13072010395.jpg? psid = 1]

  Hello

  Looks like you want to update the Bios back-base. You can download windows-based BIOS:

  http://img830.imageshack.us/img830/7228/78420804.jpg

  Note, updating of the Bios, close all running programs running, including antivirus, disconnect from the Internet. However, if the system works well. should not touch.

• Satellite A60-106: Question about updating the BIOS and the BIOS Flash

  Fact the BIOS Flash update the BIOS or that requires a different file. I've updated a Satellite A60 BIOS to 1.9 but am not sure if cela flashed the BIOS as well.

  If this isn't the case, where I could get a file to Flash BIOS for satellite A60-106?

  Hello

  Sorry, but you question is a bit confusing.
  The update of the BIOS flashing the ROM module I put t know which version is installed before upgrading the BIOS, but if after the upgrade, a new version of the BIOS appears then the procedure was a success.

  The good BIOS and how to upgrade the BIOS information you will find on the page of Toshiba.

• HP Pavilion DV6 3122TX: updated the BIOS F.29 don't switch HP Pavilion DV6 3122TX Ati graphics card

  Hello

  I have HP Pavilion DV6 3122TX and recently I was updating my drivers and software from the HP Web site for my laptop. Everything was done smoothly. As I updated my BIOS, I noticed that I was not able to switch between ATI Radeon 5650 and Intel HD Graphics, then I was also shocked that he wasn't showing a charger plugged into icon too. Although the battery was charging but didn't show any icon for it. I am running Windows 7. After a few days, my battery was went wrong and was not in charge. I bought the new battery from HP Store for my laptop, and then after a few days now he is dying too. My computer laptop suddenly stops on about 30% of battery remaining and battery does not charge. I arranged another charger and plugged, but once more. I gave the laptop to the service center local and got NO from them as well. They couldn't find the problem. After a lot of research and reading messages HP, I finally understood that it was the problem with the BIOS Update and Windows 7. So, out of curiosity, I installed Linux RedHat 6 on windows 7 and everything was OK. But I am a graphic designer for Linux is not a good choice for me. I want to just restore my BIOS in its original version of the default BIOS. Please kindly help me to get my original BIOS. I tried everything on my hand. I also ask HP to the original versions of the drivers like BIOS on its Internet site. My laptop is dying. Please, Experts, I need your kind assisstence. Thanks in advance

  @AbdulRaheem25

  Create the key USB HP Diagnostics of material 3-in-1 PC and boot to it.

  If you updated the BIOS from the old version will still be in a folder of your operating system. Use the method I proposed to get it back.

  If you are unable to read the instructions on the web page of Diagnostics of material for the HP PC, then I suggest that you pay someone to do it and create the flash drive for you.

  We are here for our volunteer help and trying to direct members of the resolution of their problems, but if you want us to help you work with us. We (HP Experts) are not employees of HP, we are volunteers.

• HP Pavilion m6-1045dx: update the bios y dios UN error

  Update the bios y dio UN error desde the pagina driver busque bios desde php the instale y y is reinicio pc sola y is quedo pantalla negra pero el equipo lights are una portatil HP Pavilion m6-1045dx

  Ayuda than devo hacer para las dress bios?

  @David- 100

  Thank you for visiting our English HP Support Forum. We are only able to respond to messages written in English. To ensure a fast response, it would be desirable to ask your question in English. The following links are here to help you if you want to post the following language Forum.

  German: HP Kundenforum
  
  Spanish: Foro of HP users
  
  French: Forum users
  
  Portuguese: Forum back HP users
  
  Chinese: 惠普个人客户支持论坛
  
  Korean: HP 지식커뮤니티

  Thanks for your understanding

• Pavilion 17: update the bios

  downloaded/installed upgrading the bios. everything was going as it worked fine, but HP support assistant always displays the update in the message center and the action log does not show the update?

  Hi @j5p,

  Welcome to the HP Forum! It is a wonderful location to converse with the community, get help and advice. You have a rewarding experience, I would include the following link for your perusal and reference. First time here? Learn how to publish and more. What is your specific model of the Pavilion 17? Computers laptops HP - how can I find my model number, serial number or product?

  I understand that you believe that you updated the BIOS, however, HP Support Assistant, always displays the message. If you enter the bios does show the updated version? If so, then update the bios successfully. If you delete the message from the HP Support Assistant it back? Computers HP - using HP Support Assistant (Windows 10, 8, 7)

  Please let me know how it goes.

  When you have resolved your problems, you choose "acceptable Solution" on this post to alert other members and visitors of your success and may help. To show recognition for my help. Please click on the ' Thumbs Up icon"below.".

• HP Pavilion ze4936ea: update the BIOS.

  I have a HP Pavilion ze4936ea (PN624EA #ABU) is all about 2005.
  The BIOS revision was F.15 and I downloaded sp31140.exe to e.16.
  I don't have what I had when I upgraded to e.16.

  I tried to update the BIOS because it indicates by error that there is a floppy drive or a USB Flash drive at startup. But it is not a Floppy drive in the ze4936ea and I had a program on USB I tried to start from! The program BIOS F.15 erred. As well as the program e.16 BIOS, which also indicates a floppy drive, but no USB Flash drive in the laptop.

  What's not here?
  Can I get a BIOS program that allows me to boot from a USB Flash drive?

  The system BIOS has not the ability to boot through USB devices. I suggest that you create a bootable CD with the utility you have on the USB flash drive.  Here is a link that allows you to create a startup disk:

  http://www.computerhope.com/issues/ch000669.htm

  You will only have the four boot options following for your system:

• Update the BIOS for HP Pavilion M9400f

  PC desktop, HP Pavilion Elite 9400F

  Windows 7 64-bit.

  Error message: Incorrect for your system (253) Bios please contact support.

  I use the bios upgrade HP site says to download for my PC, but the upgrade works only with a card mother M2P61PM-HM.

  Mine has a motherboard M2n68-(NARRA3) and the latest bios for this motherboard does not support Windows 7 and is abandoned.

  My system black screen constantly when out of mode 'sleep' and upgrade the bios addresses that issue.

  Try to use the BIOS Nettle3 update on the card mother Narra3 will cause problems. Most of the time that BIOS HP update routines is written for a specific operating system and will not install on other operating systems.

  Make sure you use the update of the correct M2N68LA BIOS for your motherboard Narra3, several different versions of the M2N68LA were made (narrated, Narra3, etc.)

  Please put back the computer it's original Vista OS to install the M2N68LA (Narra3) update of the BIOS. After you install the update, you can return the system to Windows 7. Make it easy and not lose all personal data, disconnect your Windows 7 drive and a blank disc. Using the recovery DVD, install Vista. Update the BIOS. Disconnect the Vista disc, and then reconnect the player to Windows 7. You should be good to go.

• update the BIOS of motherboard for HP Pavilion M7570n and now my computer going in circles

  I have a HP Pavilion - XP or version of the original software m7570n!

  Motherboard is HP/Compaq name: Leucite-UL8E

  http://support.HP.com/us-en/document/c00714544

  I downloaded and installed from HP website: update the BIOS of motherboard P5LP - THE

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-54482-1&cc=us&DLC=en&LC=en&...

  Now my computer boots into a circle.  It begins... window XP blink... I can see a quick blue screen and some info, but too fast to read... then at startup mode without failure, etc, etc, etc! Each option piced it goes back to the circle of frustration.

  I entered F1 and set it for return to the settings by default, but who has not set.  I see several suggestions to pull CMOS jumpers, but fear just start riders pulling and causing damage.

  Someone can give me a step by step repair to understand where and how update BIOS software... is so simple that all reinstall the same file again?  I have the origianl file downloaded on my USB key.  I'm not comfortable with moving forward in fear of more damage!

  THANKS FOR ANY HELP IN ADVANCE!

  TIM

  NOW FOR THE FINAL SOLUTION:

  Google is my - so true!  I did google how to reflash the BIOs, but I kept? How I was going to do when I've never seen a 'USB key' as an option in the BIOs boot sequence.  I then looked to do the 'flash' of a CD - with the boot BACK on it, files but everywhere I read on line discussing this method - said most flash programs require you to save first the old BIOs files - you can't do from the BACK / BIO Flash or at least I haven't found a way to BACK startup disk!

  NOW, I'M TOTALLY FRUSTRATED!  Now what should I do?  I knew that the 'blue screen of death"contained the error message that I need to know! I just need to read it, but I couldn't because it flashes in a fraction of a second? GRRRRRRRRRR

  WELL!  I grabbed my digital camera Sony - put on 'SPEED' shot!  I started the computer and kept shooting until I captured the screen!  The error message was "0x0000007B"!

  I googled the error message and found this site:

  http://pcsupport.about.com/od/findbyerrormessage/a/stop0x0000007b.htm

  I have read on the list of options and decided that the setting in the BIOs should be where I wanted to start.  I changed the setting for the "RAID" to FDI HHD... BINGO!  I'm back in the game!

  SO THANK YOU FOR YOUR HELP AND TAKE THIS INTO ACCOUNT FOR FUTURE TECH SUPPORT QUESTIONS!

  TIM

• Problems after updating the BIOS on Satellite Pro P200

  I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

  After updating the BIOS, I have now two problems:

  1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

  2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

  Basically, I want to get everything working again as it should, but cannot find any information on these issues.

  After further review, it appears that the update of the BIOS is not the cause of the problems.

  Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

  After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.