Pavilion P5P69EA: hp cannot search the software and drivers...

Similar Questions

• HP Pavilion dv6 Notebook PC: restore the system and drivers

  Hello. A few days ago I faced a bad experience with my laptop HP Pavilion dv6 Notebook PC. System crashed. At any time, I tried to turn it on, an error message appears and the system was blocked. The message was: FILE: \BOOT\BCD status 0xc000000f, asking for the disc of Windows 7 system running. But the system disk did not run at all. I checked the situation and found the hard drive with 6 partitions instead of 2. I found a named partition BOOT (X which was a replica of C:.)  When I tried to restore the system with the recovery disc, something has obtained control of the recovery disc, so that C: might not be formatted; nor was X:. Also, I tried to cancel the file in X: but disc was protected and does not allow changes. If only I could get my uninstalled hard drive and all partitions have been cleaned. I got my hard drive cleaned perfectly, but my recovery disk can be installed correctly. So, the system has not yet restored. My question is: what should I do to get my laptop with the system restore? any ideas?

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number. Please enter the product/model information in the HP Online Support page for consumers , and/or post it here for our review.

  

  Based on the age on your computer, it could come from the factory with the scores 5 or more. It is common on newer computers that use UEFI and GPT partitions. "Windows 7 system disc", the computer asking wass is a Windows 7 repair disc or a Windows 7 installation disc. None of these discs come with your HP computer and must be downloaded or created in Windows.

   

  Start by using your HP recovery disk set (should be DVD 3 or more). Insert the #1 disc and restart your computer to start the process. Insert the remaining disks as requested, until the recovery is complete.

   

  If this does not work, and you can read the product key 25 character Microsoft Windows 7 on th COST Microsoft attached to your computer, see "How to install Windows 7 without the disc" for download Windows 7 SP1, create the Windows installation DVD and install Windows 7.  If you prefer to install Windows 7 from a USB Flash drive, please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash Drive. After the installation of Windows by using this method, you will have is more HP or software customizations. You'll also need to identify and download the drivers for hardware devices that Windows 7 does not already provide drivers for.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Printer offline, reviews have installed the software and drivers up-to-date

  My printer was working fine just a yesterday that no, he didn't tell his offline, I checked / power cords.  I reinstalled the software printer, how to use Add a printer, all my files/printer is shared and Ive installed all the updates.  It won't print anything from anywhere, but he shoot to the top of the photo on the memory card.  Thank you!
  * original title - why my printer is offline?  PLEASE HELP! *

  Hi calilove369,

  See the following article for troubleshooting:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  I hope this helps!

• How to install hp dvd with the software and drivers, which came with a recovery CD?

  G72 259WM laptop... The application and Driver Recovery DVD supplied with the recovery kit (3 DVDs) was not loaded on my laptop when the hard drive has been replaced. I want to intall it butg there install the files on DVD and windows does not load it automatically. I just want my laptop to factory as it was when I bought the system.

   

  [personal information] I could not find a way to do this, please help! Thanks in advance!

  The shop obviously does not use your recovery disks to install Windows on the new drive. I had suspected that when you said that none of the original software has been installed. Recovery Manager also would have been installed.

  I would go back to the shop, with the recovery discs in hand and ask that they make a correct installation, or do the installation yourself. Put the first disk in the CD/DVD drive, and then restart the laptop. If you get a prompt to hit any key to boot from the CD/DVD, press the space bar.

• Pavilion dv7 6163 - cannot find the software for HP TrueVision HD webcam.

  Windows 7. Says online help click Start and type in quickplay. No program is installed. I can start Skype and it works but I'm used to webcams with an application of its own which runs it, not just Skype.

  According to me, Miss me a HP program?

  Thank you.

  Hello

  You should have installed YouCam Cyberlinks (this can sometimes be hidden in the list of all programs in a folder called 'Communications & Chat').  If it is missing, you can download and install this application at the link below.

  CyberLink YouCam Installer.

  Kind regards

  DP - K

• Trouble installing the software and the driver for Office Jet Pro 8600

  I get error that "additional software is necessary to continue' when I try to install the software and drivers for my wireless printer Office Jet Pro 8600. I just got a new laptop and had at first no parameter problem the printer and it prints fine, but now for some reason it is not print at all. I tried to restart my laptop and printer several times, but it keeps saying printer offline even if it is connected to my wireless. I followed the recommendation of an assignment that suggests to abolish the printer and reinstall, which is where I am now. Now, I can not install this printer at all by the above error message. Help, please!

  Thank you!

  Hi HSchulz,

  When you try to install with the CD, try installing the latest Windows 7 driver from the HP website. Restart the computer, turn off the printer, then reboot your router and then launch the installation. Here is a direct link to the driver file:

  http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

  Select the connection Wireless option during installation to get the printer on the network and associated with the laptop. Let me know if this helped at all...

  I work on behalf of HP.

• Find software and drivers HP

  Never find to search the drivers of HP or software for your HP computer. Fortunately HP maintains the original drivers available on their Web site, just to know where to go to find them.

  Below will have instructions on how you can find the drivers and software

  The first thing you want to do is to navigate the site

  HP customer service

  

  On this page, you'll want to put your computer product number and click on the button NEXT.

  Once you have found the product page, you will see a page similar to this one

  

  From there, you will want to click on the software and drivers link. This will then take you to the next page.

  

  You can now select the operating system, the computer is running. It will be important to identify the appropriate operating system and if it is 32-bit or 64-bit. Not all drivers are universal. Install a Vista driver on a Windows 7 computer could produce unwanted results.

  If your operating system is not listed then HP currently has no drivers or software available for this operating system.

  Once you select your operating system and click the button FOLLOWING, that you need to list software and drivers available for your computer.

  

  There are a few things to keep in mind.

  1. This is not a complete list of software. Many software applications are easily re-downloadable through your HP Recovery Manager. More information available for this application available via the link below. While the link is specifically for Windows 7, many of the same information is still true on all Windows platforms.

  Using Recovery Manager to restore the software and drivers (Windows 7)

  2 HP partners with many other manufacturers for you bring the computer that you know and love. ASUS, Intel, Realtek, nVidea, etc.. While HP has often maintains a list of the original drivers for the hardware component in your computer that is available on their Web site, there may be some driver updates are available. You should always check with the manufacturer of the device for drivers up to date before you can rely on HP to provide information more up-to-date.

  It is a single information guide, technical problems, to address their own threads using the thread to create button.

  All comments, questions, or all around your comments regarding the walk through is welcome. Please keep all technical issues published in their sections relavent on the HP forums in their own net.

• Language software and drivers

  How can I force the software and drivers for my Color LaserJet CM1015 MFP to install in English and not in the default language.

  I have a Portuguese (pt) windows xp and the software tries to install Portuguese (br) versions, this is not acceptable!

  THX.

  Hello

  To resolve this problem, follow the steps below.

  Windows XP

  1. uninstall the SW if you have successfully installed the driver.

  2. remove the install CDROM or DVDROM drive.

  3. Click Start, control panel and select regional settings.

  4. click on advanced.

  5. change the "language for non-Unicode programs" to "English (United States)".

  6. check the box for the default user account settings.

  7. click OK and restart when you are prompted.

  8 put in the installation CD and install the printer software. Joanie you see installation screen in English.

  Windows Vista

  1. uninstall the SW if you have successfully installed the driver.

  2. remove the install CDROM or DVDROM drive.

  3. open regional and Language Options by clicking the start (Windows icon) button, click Control Panel, click clock, language,

  and region, and then click regional and Language Options.

  4. click on the "Administrative" tab, under the tongue for clcik programs no unicode on "change system local." Select "English (United States).

  5. click OK, and then click Restart now.

  6. put in the installation CD and install the printer software. You should see the installation screen in English.

  Kind regards

  AlmostThere

• HP deskjet F4440 all-in-one: HP deskjet F4440 all in one software and drivers

  I can't find the software and drivers for this product

  Hello

  The HP Deskjet F4440 done part of the F4400 series, it is suitable for your printer driver.

  What do you mean by it would not work?

  What beavior or specific error message you see all trying to install it?

• Having problems installing of software and drivers for HP Deskjet 9800

  I uninstalled my HP Deskjet 9800 because I have too many problems with it. I use Windows XP.  I went to hp.com and download the software and drivers for this printer. The software and drivers simply go to my folder of the downloaded files. How can I install this software for my printer work? Any help would be greatly appreciated. Thank you, Patricia

  The downloaded file is a .zip or .exe.  Go to your download folder (right click on start > explore, click the Folders icon and navigate to your folder) and then double-click the downloaded file.

  If it is a .zip file, it will create a folder.  Inside this folder is going to be a setup.exe file - double click on it.

  If it's a .exe file, double-clicking on it to launch the installer.

• Try to install the software and I get an error message saying that the installation cannot continue because a previous installation requires your computer needs to be restarted.

  Original title: .net framework 4.6

  I try to install the software and I get an error message saying

  Setup cannot continue because a previous installation requires your computer must be restarted. Restart your computer and run the Setup again.

  so I restart my pc and run it again and the same message appears

  Try to perform a "clean boot" to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you start Windows, install a program or an update or when you run a program in Windows.
  http://support.Microsoft.com/kb/929135

  Perform a clean boot to determine if background programs are interfering with your game or other programs
  http://support.Microsoft.com/kb/331796

  One by one add back an application both in the boot list to find the software application incriminated.

  J W Stuart: http://www.pagestart.com

• Pavilion dv2415nr laptop. It will not stop. I downloaded the software and it will not turn off.

  I have a laptop dv2415nr Pavilion and it will not turn off.  I recently downloaded some security software and it is not stopped since the download.

  Hello

  I recommend that you make sure you have your license key for webroot. Uninstall the software and reboot. If that solves the problem, it's time to go to the Webroot support and ask their tech support that it.

  Kind regards

  ERICO

• I bought Photoshop element 14 this morning, get the serial number Adobe e-mail and downloaded the software, but... Adobe is always telling me that they cannot validate the software. What should I do now?

  I bought Photoshop element 14 this morning, get the serial number Adobe e-mail and downloaded the software, but... Adobe is always telling me that they cannot validate the software. What should I do now?

  Please see the links below.

  • Invalid serial number error
  • Error "serial number is not valid for this product". Creative Suite

  Hope this will help you.

  Kind regards

  Hervé Khare

• I volunteer for installation of the Government in New Orleans.  I'm helping recommendations on equipment and software.  Their editing computer cannot be connected to the Internet.  How to buy and receive the software and updates?

  I volunteer for installation of the Government in New Orleans.  I'm helping recommendations on equipment and software.  Their editing computer cannot be connected to the Internet.  How to buy and receive the software and updates?

  Please see this link in the topic "successful."

  Creative cloud using Enterprise | Applications and updates

  You can use managed delivery of applications for the following:

  • If you need to exercise strict control over the applications installed on client computers.
  • If end-users have administrator privileges on the computer.
  • To reduce Internet bandwidth consumption by preventing multiple downloads of self-service.
  • If there is no Internet access on client computers.

• cannot search the podcast on ipad

  I have not used my ipad in a few months. I try to use the podcast app. When I click on the search icon all the getting is a blank page. I searched the forums and found nothing useful. I tried logging into my account and return to and electric bike. What wrong with this app?

  IF a reset did not help, try restoring from a backup, encrypted iTunes. Probably you need to update your iOS software, too.

  Reset: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  If this does not help, you may need to restore your iPhone.

  https://support.Apple.com/en-us/HT204184