Pavilion p6380t: p6380t periodically stops by itself and then turns

Similar Questions

• Satellite P300-h-13: stops, restarts itself and then freezes in the BIOS

  Hello

  I have a laptop TOSHIBA SATELITE P300-h-13.
  When I turn it on, it starts before blocking immediately down and then it restarts itself (twice).

  Then it freezes in THOSHIBA default start screen.
  I can't access BIOS (says it charges but nothing happens).

  If I press the ESC key, I got a screen saying that the processor is detected and it gives me the ability to L2 cache, it says the RAM passed and then it indicates that the Bios system & video are overshadowed.

  I tried without the battery, but it doesn't change anything.

  Please help me solve this problem on.
  Thank you!

  Hello

  I don't know why this is happening and it's really strange question that should not happen on the new laptop.
  In such situations, you can simply try standard measures and see if it will work properly again.

  By the way: how old is your laptop? Have you noticed this behavior from the first day?

  In any case, try to enter in the BIOS somehow and set it to default settings. try to enter Advanced boot options using F8 at the start and check if the installation of operating system work (during the first backup of data, if possible).

  If nothing helps I would recommend not to do anything, but contact the nearest authorized service provider. Let them check your laptop computer and, if necessary, repair. Warranty will cover all costs.

• HP Officejet Pro 8610: hp officejet 8610 printer error "Please stop your printer, and then click.

  When I turn on my HP Officejet Pro 8610 - it goes through its cycle - once it ends the initialization of the startup LCD flashes a Blue Screen of Death with B8931C7C for less than a second, then the screen shows printer error "Please stop your printer, and then click.

  I've tried so far, I've tried it unpluggin at the back, wait 15 seconds and 60 seconds.  Also this operation and in him plugging in several power strips and directly into the wall outlet.

  I was able to restore the default settings at one time.  This questions has gradually deteriorated to the point that wow its very pretty in a loop without end with failure - consistantly crashing after start up - please advise.

  Hi @mrberad,

  Welcome to the Forums of HP Support!

  I understand that your printer HP Officejet Pro 8610 is stuck in an error state. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating, it would be for you. The error you receive is usually related to a general printer error, sometimes leading to a hardware problem.

  I take a flashlight and look inside the obstruction.

  Use this guide to check obstructions:

  • Displays a Message 'Transport Jam'

  I see that you reset the default printer. Have you tried a reset complete semi? I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  If you have completed all the above steps and your product still has a problem, service the product.

  If the printer is buyer's remorse period, you can take that back at the point of sale or contact HP.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Wireless network adapter does not work anymore and will not be repeated work without stopping the computer and then back on.

  Sometimes I leave my computer on at night.  Sometimes I notice that when I get back to him the next day that he has limited connection to the network I use.  When I try to disconnect it from the network, then reconnect, it says that it cannot connect.  Then, when I try to restart my computer it is sitting at a screen saying "stop down". "."  My wireless network software also is unaccessable in which she does not open and if I close the Task Manager and reopen it flashes for a second then closes.

  However when I turn it on manually and then turn it on again, which apparently is not good for the computer, I am once again able to connect to the network with full access.

  Can someone please tell me why this keeps happening and how to fix it?

  original title: unable to connect to a network.

  Hello

  Are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode with networking

  Start your computer in safe mode with network and verify that the question.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode with network, then put your computer in a clean boot and search for the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Method 2:

  Update the NIC drivers and check the issue.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Method 3:

  Run a virus scan and make sure.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
   
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  I hope this helps.

• Windows 8 refreshment stops at 77% and then restarts and displays an error

  I can't update my Windows 8 Pro because when I do, it stops at 77% and then restarts and displays an error (there was a problem during the update of your PC)

  Hey Sajjad,

  I understand that you cannot update your computer Windows 8.

  1. did you of recent changes to the computer?
  2. Why are you trying to refresh Windows 8?
  I suggest you follow the steps mentioned below and check if it helps.

  Method 1:
  
  I suggest to disable all external devices except the mouse and keyboard and try to refresh.

  Method 2:

  Use the check disk command for all errors on the hard drive.

  Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. Security, you can back up your data before using check disk drive.

  Use the drive control as follows:
  a. press the Windows key + X, and then choose command prompt (Admin) on the shortcut menu.
  (b) in the search box type 'cmd' and ENTER. Right click and select "Run as Administrator".
  c. type at the prompt in the command CHKDSK/p and press ENTER to scan the drive.
  d. type CHKDSK C: /F /R and press ENTER to repair corrupt sectors, if there are.

  NOTE: The root drive must be C: and drive can schedule a task to start the system, if this is the case, press on is to schedule a task, and then restart the computer to run chkdsk.
  When chkdsk is finished, boot up to the desktop, and then check.

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

  You can follow the links below for more information.

  How to restore, refresh or reset your PC:

  
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create the installation media for a PC refresh or reset:

  
  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Refresh and reset your PC:

  
  http://blogs.msdn.com/b/B8/archive/2012/01/04/refresh-and-reset-your-PC.aspx

  Warning for update: the applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. You will find a list of applications on your desktop after you refresh your PC.

  Warning for the Reset: all your personal files will be deleted and your settings will be reset. All the apps that the is come with your PC will be reinstalled, but all other applications will be deleted.

  Hope the above information helps.

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

• After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  Possible explanation.  It is likely that batteries, so fresh, can be irregular in size.   The uncertain connection would therefore tend to lead to a failure to blink and you declare.   Read my thing...

  Batteries.

• My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  Is there another way to start the IPAD?

  Try the steps here:

  https://support.Apple.com/en-us/HT201412

• my iphone 5 works if connected to my charger, when I unplug it it stays on for a minute and then turns off, I can activate it after that but it turns off again. you wonder if it's my battery. I have already restored the phone, but it did not work. Help

  my iphone 5 works if connected to my charger, when I unplug it it stays on for a minute and then turns off, I can activate it after that but it turns off again. you wonder if it's my battery. I have already restored the phone, but it did not work. Help

  Most likely, the battery is broken. With AppleCare +, a replacement of the battery is free. However, without AppleCare +, a replacement battery will cost $79.

  Apple-Support - iPhone - battery and power: https://www.apple.com/support/iphone/repair/battery-power/

• G530 flashes like 6 times and then turns off

  G530 earned months; "t lights up. Battery out and tried to turn it on with just power adapter and nothing happens. Battery put it back in and turned on only plugged while and battery lights up and blinks about 6 times and then turns off. Nothing on the screen not boot windows or anything like that?

  Remove the battery and try to start your computer. If it works, replace the battery and try again.

  If she does not press the 'power' for a few seconds, don't still no sign, contact lenovo support and ask for replacement.

• Whenever I have turn off my monitor, and then turn it back on, all my desktop icons are completely reorganized.

  This issue just started.  Whenever I have turn off my monitor and then turn it back on, all my desktop icons are completely reorganized.  This happens when my system goes into power saving mode, or whenever I have turn off the monitor.  Even if I turn it back on just 5 seconds later, all of my icons are not where they were previously.  Help!

  Suggestions:

  1 a simple way:
  . Right click on desktop > view > uncheck Auto arrange > check snap to grid.

  2. in a more elaborate way and actually a better way. I use this method I have over 150 shortcuts etc on my desk. I can't afford to have shortcuts/icons, rearranging themselves. I won't be able to find anything, if they do.
  Here is the tutorial:
  http://www.howtogeek.com/HOWTO/Windows-Vista/save-and-restore-desktop-icon-layout-in-Windows-Vista/

  Note: The method is not perfect, you can, after a while, have one or 2 icons on the spot. But it's easy to fix.

• mouse Bluetrack 4000 light turns on normally and then turns off on problem is not the battery

  mouse Bluetrack 4000 light turns on normally and then turns off on problem is not the battery.

  Hello

  1. your wireless mouse does not work?

   
  I suggest that you follow all the steps of the article which will help you solve the problem
   

  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122

• Whenever I restart Windows 7, I have to turn off and then turn on my network connection get Windows 7 to recognize my wired Internet connection. What is going on?

  I installed Windows 7 Pro on a system newly built using a motherboard Gigabyte Z77x-UD5H, Intel I7 - 3770 K CPU and 32 GB DRAM3, on a SSD OCZ Vertex 3. Everything went well. It is now about three days, since I installed the operating system. I've been adding on software and other general photo editing programs. The Internet would still work. NOW all of a sudden I lost my Internet connection.  Whenever I restart Windows 7, I have to turn off and then turn on my network connection get Windows 7 to recognize my wired Internet connection. What is going on?

  Hello is a network installed by Apple, iTunes more often software Protocol.  If you do not use iTunes * (or other Apple related programs streaming) you don't need.  If you do not use iTunes check if there are any available software updates.

• If I activate a campaign and then turn it off, updates the segment?

  If I activate a campaign and then turn it off, updates the segment? can anyone help.

  Hello

  If the segments are updated every hour until the campaign is disabled.

  Thank you

• If I'm going to activate a campaign and then turn it off, the segment will be get updated?

  If I'm going to activate a campaign and then turn it off, the segment will be get updated?

  Hey,.

  If the segments are updated every hour until the campaign is disabled.

  Thank you

• If I activate a campaign and then turn it off, will be updated in the segment?

  Hello

  If I activate a campaign and then turn it off, will be updated in the segment?

  Thank you

  Rahul

  Hi Rahul

  If the segments are updated every hour until the campaign is disabled.

  Thank you

  edynamic expert Eloqua