Pavilion p7-1154: is N360_BACKUP my D drive folder backup?

Similar Questions

• HP Pavilion p7-1154 - SM Bus controller shows not all the drivers installed.

  Hello. I have a desktop HP Pavilion p7-1154 PC.

  I updated the BIOS to the Version: 7.16 Rev, the controller USB Version: 1.0.0.72 Rev's and drivers wireless Version: 3.2.14.0 Rev a.

  All were downloaded from the HP Web site under downloads for my model. I'm running Windows 7 64.

  In Device Manager, I was always see SM Bus controller as no driver installed.

  Even after the updates listed here, it has not changed.

  Can you please tell me the best and the most recent drivers for this component.

  I think that this problem won't let me upgrade to Windows 8.

  Thank you

  George

  You have itried Windows update? Often, you can find the hardware drivers there.

  Have you tried to reinstall the chipset drivers?

  Is there a driver to the driver & software download section for your PC that is specifically for the SM Bus. Try it out and post your results here.

• Pavilion p7-1154. Put the OS on a separate hard disk than the rest programmes.

  I would like to know if there is a way that I can put the operating system on a separate HHD than the rest of the software provided with my HP Pavilion p7-1154.

  Crucial M4 SSD 256Go

  WD Velociraptor 600 GB 10 M4CT 000 rpm HARD drive

  AMD A8 - 3870 k

  Corsair vengeance 16 GB @ 1600

  Modular 500 Watt Corsair PSU

  Card mother AAHD3-HB (Hibiscus) - made by Pegatron

  Windows 7 x 64 Home Premium and all rest of the software provided with the computer

  Hello

  Your configuration above doesn't seem to be HP "stock".

  The answer to your question is Yes.  You can redirect "MY" folders type for a second hard drive with your own special storage folders. This post is a typical example of how to move 'MY' Windows folder.  That's how I separate "MY" folders of data storage (my videos, my music, my documents, my pictures, my downloads).  I also put the Contacts folder and Favorites on the data reader.

• HP Pavilion Notebook - 17-f207: Please help-need driver

  I need driver for

  HP Pavilion Notebook - 17-f207

  hardver id is:

  ACPI\VEN_ASD & DEV_0001
  ACPI\ASD0001
  * ASD0001

  Thanks for the help

  S

  Hello:

  I zipped and attached to the driver that you are interested in below...

  Download and uncompress the file in its folder.

  Don't do anything with the files in the folder.

  Go to Device Manager and click on the device ACPI\VEN_ASD & DEV_0001 who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

  Restart the PC.

• HP Pavilion p7-1154 does support Dual AMD graphics card?

  I have a Pavilion p7-1154 - serial number {removed privacy} - the motherboard is an AAHD3-HB (stock MB) made by Pegatron. I updated the stock 16 GB of Corsair vengeance 1600 6 GB 1333 RAM and upgraded the processor an AMD A6 3600 to an AMD A8-3850, all according to the guide of HP upgrade for this machine. I've also updated the PSU of 300w for a 500w 80Plus Bronze certified PSU Corsair stock.

  Now that's what I'done this day - what I want to know is the MB (AAHD3-HB) does support Dual AMD graphics card, using the proposed graphics cards, I would use a Radeon 6670 GPU.

  Mike

  Mike, after consultation with the other members, I think that double graphis is unavailable because it is not indicated in the specifications.

  However, here is a Youtube video on the CPU.  If you do not find that you were able to use it by a change in the BIOS, please share this information with the forum.  Thank you!

  If your problem is solved, please click "accept as a Solution.

• Pavilion p7-1154: upgrading the graphics card

  Hello

  I want to buy the graphics card NVIDIA 9800GT for graphic design. But before I buy it I would like to know it it is possible to be used on the PC console.

  I guess I have to upgrade the power supply and maybe the motherboard also.

  Please let me know in what concerns the 9800GT what PS and motherboard that I should purchase, if any, that would be adapted to the console. I have Pavilion p7-1154.

  Thank you and best regards

  Illustrator has requirements listed here.   The card mother's only Legacy BIOS, so I would stay with WIN 7, get an EVGA GTX 660 or 670.  It was the last of the EVGA legacy known cards.  The GTX 670 will draw 170W, then I would say once again a Corsair CX600. IT has perfect fit and is better than the recommended 500W unit inactive.

• HP Pavilion G6-2260sh card reader and video driver for win7 64 bit

  Hi people!

  I need drivers for HP Pavilion G6-2260sh video and card reader driver for win7 64 bit

  Can someone help me?

  An error message appeared so I tried the above utility to describe what driver I need.

  Semms that it's the final solution: 13-4_mobility_vista_win7_win8_64_dd_ccc_whql

  Now really perfect thanks!

• Upgrade of the necessary recommendations for HP Pavilion p7-1154.

  Current configuration:

  HP Pavilion p7-1154

  Windows 7 64 bit

  No internal upgrade done yet.

  Currently, my system seems to have followed the problems while displaying games with medium graphic settings. It is not enough to upset the gameplay, but often when heavy movement will on the parts of the screen that display this movement will be stutter a little bit in some games. I would also like to record gameplay here and there, so it's probably important to mention.

  I'm looking to upgrade the processor maximum allowed on the upgrade worksheet, but I am worried about the PSU. I know that the sheet indicates that the motherboard supports the processor, but will I need to replace my power as well? Are there other aspects that I should take into account? If so, could you give me some recommendations of specific system upgrade? Thanks in advance!

  I edited the answer to update the card that I bought it. Same Radeon HD 6750, but I had pulled the full card with GDDR5 and other name, and the actual card that I had was DDR3. This change was not made during the 3 days.

• (win 7 Pavilion): plug 3.0 HP external hard drive gives error message - why?

  I recently purchased a dv6 Pavilion and a 750 HP Pocket media drive gig.

  I am on win 7 64 and I have updated all side Windows.

  Whenever I plug the Pocket media player into a usb 3.0 port on my Pavilion, it gives me the message: "this device can perform faster if you connect it to a port 3.0 usb." In other words, the hard drive does not detect that it connects to a port 3.0.

  What could be wrong? What should I try? Everything is under warranty. The tech support person said just try it for a while, and if the hard disk is too slow, I should call again...

  How much is too slow? Wikipedia says that usb 3.0 can get 500 Mbps. What is a real figure or just a hypothetical transfer rate?  I use the cable that came with the media player of pocket and I tried several usb ports.

  Because the problem is with all the USB ports (not just 1), I have to assume that this is a problem with the operating system, hd or the cable.

  You have any suggestions on how to check and fix this? In addition, can I assume that Windows 8 would do a better job of detection 3.0 devices?

  Thanks for your help.

  Robert Nagle

  The problem turned out to be with the personal media player from HP, not the OS or the laptop. I spent 2 months trying to get HP to honor its guarantee of origin. This personal media player worked for about a day (but not 3.0 speeds), and then he has not experienced a catastrophic failure.

  I have never been able to use this personal hard drive, and HP has done nothing to provide a replacement or repair. (4 support calls from 2 hours, 2 emails, an email sent by normal mail.  This is outrageous! HP, you should be ashamed of yourself!

  I bought and maintained computers for 10 years. I am an expert user, and I've never seen such horrible service of any company.

• HP Pavilion Elite HPE - 580t: could not find driver for integrated Ethernet card for desktop HPE 580t

  This desktop computer has been through a number of operating systems and should now have 10 32-bit Windows (for other software support needs).  All right, except that it lacks drivers for connection to Ethernet (built-in) on board.

  I tried the approach of Windows Update, the "update driver" and search HP, Intel, QLogic and other places of Ethernet NIC and Chipset drivers... nothing fits or works.  The hard drive has long been wiped, so there is no recovery partition, nor do I still support discs. :-(

  Is the reported by Device Manager hardware ID: PCI\VEN_14E4 & DEV_164A & SUBSYS_3070103C & REV_02.  164 a same device does not appear on the pci database. :-(

  Yet once again, I need to Win10 - 32-bit (no 64 - bit).  Thanks in advance for any help that can be given.

  Hello:

  There are no W10 driver for this chip ethernet I can find.

  In fact, everything that I could find were drivers for Windows Server 2003 and 2008.

  HP doesn't even have driver Broadcom ethernet on your PC support page, and I couldn't find the site of Broadcom or the other.

  I explored the Broadcom file and there is no support drivers for the hardware ID you have posted in the file.

  So, the only suggestion I can offer would be to try the driver I compressed upwards and attached below.

  Download and uncompress the file in its folder.

  Don't do anything with the files in the folder.

  Go to Device Manager and click on the ethernet controller requiring driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and see if the driver will install.

• Possible drive with backup problem

  Recently, I needed remove the files from the old drive to backup after discovering their involuntary inclusion on my regular backup disk. These files somehow became included for backup to disk when I have included another external hard drive where they lie in the intent of formatting that lead to use as backup for the second part of my system dual-boot. This problem is surface shortly after the withdrawal of older backups with error message:

  "Time Machine could not finish the backup"Backup 04 BateStar."

  Cannot copy the files on the backup disk because it seems to be read-only.

  You need to maybe repair or reformat the drive using the Utility Dist. If the disc is not repairable, you usa another disk for backups. Open Time Machine preferences to select a different backup disk. »

  I completed both an audit and a repair that shows the drive to be good, no errors.

  Am suspect at this stage that it is was eventually added to the directory, or to a location on the disk are addressed by the directory of corrupted data.

  Is it possible to fix this without reformatting the drive 3 t?

  Furthermore, need to reformat, how would I be able to retrieve up-to-date backups without including whatever the location of incorrect data are included?

  Sparkgapper

  Try this...

  http://Macs.about.com/od/troubleshooting/Qt/fixing-time-machine-errors-the-Backu p-Volume-is-reading - Only.htm

• How to choose the download location? download automatically to the users in c drive folder. I want to change it... Please help me...

  How to choose the download location? download automatically to the users in c drive folder... I want to change my office... Please help me out...

  Tools-> Options-> save-> click on the Browse button and find the folder where you want to save the files.

• I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  If you had a Time Machine backup, you can use the Migration Wizard and connect your new Mac on the external drive which has the Time Machine backup: move your content to a new Mac - Apple Support

• I want to use a flash drive for backup, BUT I want a full backup of the entire drive.

  I had once an external drive for backup.  It was supposed to be a backup that would replace everything and put it back where it was.  I cheated because when I got to use it I found that it would reinstall was certain documents and photos.  None of my downloads and all the update programs has been lost. I wanted a mirror image!

  Now, I think a full image on a flash drive would be the way to go, but I don't know what software to use.

  I need help from someone who has this software and a USB flash drive.  Thank you

  Hello

  1/10 1.5 TB = 150 GB - buy a 150 GB flash drive (if you could find it on the market today) could cost you an arm and a leg. Buy a 1 to external portable HARD drive can cost you a little more $ 100.

  I hope this helps.

• Weird "cmd" option in the context menu for the drive/folder

  Recently, I noticed a strange 'cmd' (as what) command appeared in the context menu for the drive/folder. After pressing it, I get an error "this file doesn't have an associated program to perform this action."

  Efforts to eliminate this question nagging eye, using regedit and various 3rd party menu popup editors, have failed.

  Any ideas why this might have happened?

  Thank you in advance.

  So, I thought about it. It indeed is a corruption of the menu prompt integrated (that I didn't know existed until I started to search for this problem).  The problem and the fix is here:

  There is a key called "command" in HKCR\Directory\shell. Delete the key "cmd" under "shell", and then adding the following code appear to have solved the problem.

  [HKEY_CLASSES_ROOT\Directory\shell]
  @= 'none '.

  [HKEY_CLASSES_ROOT\Directory\shell\Command Prompt]
  'Extended '=' '
  "NoWorkingDirectory"=""

  [HKEY_CLASSES_ROOT\Directory\shell\Command Prompt\command]
  @= "@shell32.dll,-8506.
  'Extended '=' '
  "NoWorkingDirectory"=""

  [HKEY_CLASSES_ROOT\Directory\shell\Command Prompt\command]
  @= "cmd.exe /s /k pushd \"%V\"" "