Upgrade of the necessary recommendations for HP Pavilion p7-1154.

Similar Questions

• HP Pavilion dv7 / LM00EA #UUW: upgrade of the possible SSD for my Pavilion dv7?

  Hello

  I want to upgrade my computers hardrive portable SSD-Drive. It says on my laptop service guide that only intel based model supports on the ssd drive. However, my flag has AMD Turion. Anyone would confirm, weather, I can upgrade the HDD-> SSD?

  In addition, if the upgrade is possible, can I install the current HARD disk drive in the second location on hard disk? If so, are there needed additional cables/adapters.

  I tried to find this info on the HP partsurfer, but no luck.

  Any help much appreciated...

  News of the laptop:

  HP Pavilion dv7 / LM00EA #UUW

  Kind regards

  Jarno

  jhuuskonen wrote:

  and the number of products. It's actually3EA #UUW (zero, zero) LM00. Sorry, my bad.

  Hello

  Much better now. The following link shows the specifications of your machine:

  http://support.HP.com/au-en/document/c02776731

  It's a HP Pavilion dv7-6010eo. Currently it has 500 GB SATA (7200 RPM), you can switch to the SSD. You can also put a second HDD of your machine, but you need to caddy and connector. Please visit the following link:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info & products_id = 379

  Kind regards.

• The upgrade of the power supply for HP Pavilion M7570N

  The reason I'm on this forum is when I called hp support and gave me a stupid answer of not being able to change the PSU because of software...

  Well well, the reason why I'm spending power supply is because I bought a new video card and he needs about 500watts and my current power supply is 300watts and I was wondering if I can change it. The video card I bought requires also [2] PCI-E 6-pin

  Video card: http://www.newegg.com/Product/Product.aspx?Item=N82E16814150325

  Current PSU: HP manufacturer: 5188-2625

  New power supply: http://www.newegg.com/Product/Product.aspx?Item=N82E16817159085

  I don't know if the size can fit the case m7570n (the slot of the psu) and I don't know if she has enough connectors for everything that is inside the computer

  * Note * I have not changed the computer, I haven't added or whatever it is taken so the connectors, there will be the same amount connected

  Message edited by TheNoob on 2009-02-02 19:01

  It's a high-end desktop PC.  No doubt he will come with an ATX PSU with 5VDC, 12VDC and 3.3Vdc output rails.  I'm not familiar with the Interior of your PC, so I'll give you two General configurations of PSU layout.

  1. design intermediary such as PC Power & Cooling with one or two 80 mm fans to expel air through the PSU.

  http://www.Newegg.com/product/product.aspx?item=N82E16817341011

  2 down-draft design as Cosair 450VX with a 120 mm or more huge blowing fan case in the heat sink and the motherboard of the PSU.

  http://www.Newegg.com/product/product.aspx?item=N82E16817139003

  If the power supply is at the top, back or side of the PC, then a power supply down-project will do a better job to remove heat from the PC.  If the power supply is in the middle of the PC, then go with an intermediate design.  This design will generate more noise at higher load, since the smallest fan should turn more quickly to transport the same amount of air in a 150 mm or 120 mm fan.

  Looking for a nominal 80% efficiency POWER supply.  Detachable power cable is a bonus to maximize the air flow inside the PC.  Make sure the power supply is delivered with the right type of power connector to drive you GPU.  All modern units of quality with 20 + 4 and 4 + 4 key cards.  If you do not plan to run graphic dual with a high range GPU, so it doesn't matter what quality 80 watter 380 power SUPPLY Antec, Corsair, Enermax and Seasonic PSU will be enough.  You will need to back up POWER supply to 450-550W, if you run two graphics cards high-end.

  A good 450W PSU is a good compromise because it is more effective when the PC is idle and has enough power to run two GPUS.  If you want to save $ on electricity, then get a smaller power supply (range 300-350W) because these units reach the level of efficiency of 80% around release of 65 to 70 watts.

• Pavilion dv7 - 1228ca: how to order the LCD backlight for hp pavilion dv7 - 1228ca

  Hello, could someone to give advice how control the backlight of the LCD screen for hp pavilion dv7 - 1228 ca?

  Thank you.

  Hello

  Unfortunately, the machine is too old, not parts available:

  http://PartSurfer.HP.com/search.aspx?SearchText=NB238UA

  Please use the part number on the list and the search on eBay or other online stores.

  Good luck.

• Design the necessary driver for EHR 300 digital camera

  Low load design the necessary driver for above camera

  Go to the manufacturer.  They have created the product, they supported (or not) the product.  No matter what operating system you are running, etc. - If they can't stand on the said OS - almost anything else you can find to make it work is a kludge.

  I have not yet found a camera with the model number you gave.  Maybe I've found someone trading some old webcam/mic has put online - but I found for most sanders and a stereo?

• Pavilion 15 r033tx: all the necessary drivers for windows 7 ultimate r033tx

  HIII
  Recently, I installed windows7 ultimate portable computer on.my
  I hope someone could help me out with all the necessary drivers to download n install them
  Thank you!!

  Hello:

  Here's the W7 x 64 support for your model page.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-15-R000-notebook-PC-series/6875200/model/7308901

  I see wireless and bluetooth drivers are listed.

  Here are the drivers for the wireless and bluetooth.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_147188_1

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_147890_1

• Pavilion g6-1d21dx: what is the latest BIOS for my Pavilion G6?

  Details, please! I was told on this forum that I had to upgrade the BIOS for my Pavilion g6-1d21dx to a F.48 version, which seems to be the last being available on the product page. However, the BIOS currently on my machine is version F.49. F.49 would be not newer than a F.48? Can someone explain the discrepancy and tell me if there are significant differences between the two versions of the BIOS?

  I ended up installing the BIOS revision F.46, because this revision restores the ability of the computer to enter and exit the sleep and hibernation modes, which was broken in a future revision of the BIOS (which has been a HUGE source of frustration). In the absence of other information on the revisions of the BIOS, I recommend that users go with revision F.46. The 32-bit version of Windows 10 works beautifully with F.46 on my g6-1d21dx Pavilion.

• HP Pavilion 15-e073ca: 2nd HARD drive cart, replace the optical drive for HP Pavilion e073ca 15 Notebook PC & Windows 10

  Hello!

  I intend to add an SSD in my two years 15-e073ca HP Pavilion Notebook PC. I found some sites that I can remove the optical drive and put a second drive using a caddy adapter in the optical drive Bay. I found that some people on the forum did it successfully, but nothing on my PC model. I want to know if he could work with my product.

  In other words, there is my plan:

  1 remove the real disk HDD hard bay and replace it with the new SSD.

  2. remove the optical drive and replace it with the adapter caddy containing my old HDD.

  3. do a clean install of Windows 10 on the SSD, using a recovery USB stick made with my system Windows 10 real (which has been updated from Windows 8.1).

  I plan to purchase the following parts:

  1 - a HDD / SSD cart adapter for HP Pavilion 15 (model OBHD9-SATA-SATA-BU9), of NewmodeUS (http://www.newmodeus.com/shop/index.php?main_page=product_info&cPath=2_5&products_id=583)

  2 - a SSD 128 GB (article SDSSDHP - 128G), SanDisk (http://www.sandisk.com/products/ssd/sata/ultra-plus/?capacity=128gb)

  I have a few questions before I buy parts:

  1 - the two drives (my old HDD and the new SSD) are recognized by the motherboard / BIOS and the operating system (Windows, 10)? Is there a limit to a unique HARD/SSD disk drive on the computer?

  2 - the height of the SSD is 7mm, and it seems that my old HDD is 9.5 mm in height (model WDC WD10JPVT-60A1YT0). It would cause no problem (I need to add spacers)?

  3 - these parts work together and with my computer (size, compatibility)? You can expect any problems with this upgrade?

  4 - clean install Windows 10 quote, because I intend to install it on a different drive than the one I used to create the key USB recovery flash? I have never done a clean install of Windows before.

  Thanks in advance for your answers.

  Haghe

  Your plan is perfect. The SSD to will of 7 mm that always come back fine it just will be lower in the caddy. The holes and SATA connections are in the same place as a hard drive of 9.5 mm. You can use a spacer (many SSD include one in the box) but not really necessary.

  Installing SSD for Windows 10 the way you expect is not really "own", that he will again introduce files and programs, in my opinion and certainly drivers. Whatever it is, it works perfectly and activates the old installation has been enabled.

  The hard disk in the optical adapter will not be bootable and will transfer the data a bit slower than a drive in the main compartment, but will still be usable for most cases. If you need fast input/output like Photoshop or video editing move the job file to the first SSD. Alternatively, you may wish to consider documents and photos and other migration on the HARD drive to keep the 128 GB SSD to fill. You can right-click on these files and select 'place' and move them. After the back if you need some help with that.

  Enjoy.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pavilion 15-p263nl: 2nd HARD drive cart, replace the optical drive for HP Pavilion p263nl 15 Notebook PC & Windows 10

  Hi all!

  I intend to add an SSD for my HP Pavilion p263nl-15 Notebook PC. I found some sites that I can remove the optical drive and put a second drive using a caddy adapter in the optical drive Bay. I found that some people on the forum did it successfully, but nothing on my PC model. I want to know if he could work with my product.

  In other words, there is my plan:

  1 remove the real disk HDD hard bay and replace it with the new SSD.

  2. remove the optical drive and replace it with the adapter caddy containing my old HDD.

  3. do a clean install of Windows 10 on the SSD using a USB key recovery made with my real Windows 10 system (which has been updated from Windows 8.1 July 2016).

  I already have a 120 GB OCZ SSD (OCZ Vertex 3).

  I have a few questions before buying the adapter:

  1 - the two drives (my old HDD and the new SSD) are recognized by the motherboard / BIOS and the operating system (Windows, 10)? Is there a limit to a unique HARD/SSD disk drive on the computer?

  2 should. What size the card be? I found offers for 9.5 mm and 12.7 mm that are supposed to be suitable for HP Pavilion in general

  3 - these parts work together and with my computer (size, compatibility)? You can expect any problems with this upgrade?

  4 - clean install Windows 10 quote, because I intend to install it on a different drive than the one I used to create the key USB recovery flash? I have never done a clean install of Windows before.

  Thanks in advance for your answers.

  Alessandro

  p.s. in this section of the forum (where I took most of the post), the solution worked almost perfectly, but it's a different product of the Pavilion 15 ^^

  Hello

  1. Yes,

  2. your machines use 9.5 mm SATA Tray,

  3 problem? I can't answer this question because who knows nothing until the track.

  4. I don't know how you create USB recovery but a good new installation should work.

  Kind regards.

• The fill memory for laptop Pavilion dm1-4010us?

  What are the specifications of memory RAM upgrade 4 GB laptop Pavilion dm1-4010us?  I tried to improve my memory from 4 GB to 8 GB by adding an additional module of 4 GB.  In both cases, the laptop wouldn't restart, and I had to remove before proceeding.  I am trying to determine the EXACT specifications for the upgrade, I hope to accomplish, so that I have purchase the correct memory module the next time.  Thanks in advance for any help.

  You are the very welcome, Doug.

  Please post back and let us know how your upgrade was memory.

  I'm not a 'true' Associate Dean. I'm only insofar as a Bachelor's degree in life.

  HP uses a schema of academic rankings for members of the forum.

  http://h30434.www3.HP.com/T5/community-news/HP-support-forum-ranking-overview/m-p/6#M337

  More you help people and they give you "Bravo", you go to the top of the scale.

  If you click on my user name, I have a public profile web page that gives a little info on my experience.

  Best regards

  Paul

• TravelMate P653M - update the necessary driver for ACPI\VEN_SMO & DEV_8820

  My system has been upgraded to windows 10 but froze when I installed a corrupted Microsoft Update, so I reinstalled windows 8.1. All my drivers are current except a... located under ' other devices / Unknown device. The "Hardware ID" value is ACPI\VEN_SMO & DEV_8820 (located on PCI Express root complex).

  I found a few sources online that claim to have the necessary driver (DriverPack solution), but I want to be sure to get this necessary driver from a reliable source. Can anyone help? Thank you

  Thank you for your answer... just what I need. problem solved.

• Necessary drivers for HP Pavilion 500-267c Windows 7 Professional 32-bit

  Hello

  I upgraded my HP Pavilion 500-267c windows 7 Home premium 64-bit windows 7 Professional 32-bit.  I need all drivers of base.  I couldn't find anywhere for HP pavilion 500-267C windows 7 32 bit prof.  Help, please!

  Drivers for Ethernet controller network controller, device PCI Simple controller PCI Communications, audio, graphics, etc.

  Your help is greatly appreciated... Thank you in advance...

  Daniel.

  Hi, Daniel:

  There is no 32-bit support for your model.

  You have to experiment with the drivers of business models and of drivers from the Internet sites of the Lim component material.

  You can try these for starters:

  1 chipset driver. First, install and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

  2 the graphics driver.

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23638&lang=eng&OSVersion=Windows%207%20(32-bit) * & DownloadType = 0a % 09% 09% 09% 09% 09% 09% 09Drivers % 0 a 09 09% 09% 09% 09% 09

  3. audio. This one, I'm not sure, and you never have the audio to work (try to update the Device Manager and the Auto search box once you can connect to the internet).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=19282&keyword=IDT&DownloadType=drivers&lang=eng

  Network: Download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128686-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0007

  PCI Simple Comms:

  Try windows update of the device.

  USB 3.0:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3467&DwnldID=22824&keyword=USB+3.0&lang=eng

• Cannot find the necessary drivers for Satellite M30X

  I have 4 error codes displayed in hardware, 1 controller network, 2 & 3 PCI Flash Memory (twice) and 4 video controller (VGA compatible).

  These are all driver problems, but I can't find the necessary drivers on the site of Toshiba driver. I have lost the original software provided with the PC.

  Someone at - he of the good suggestions. I can't use my wireless internet, neither the DVD game, I tried to download as much as I can to help, but nothing fix the fault.

  Error code 28 showing all have.

  Hello

  I checked the Toshiba download page, and it has listed all the necessary drivers, tools and utilities for Satellite M30X.

  I just hope that you have installed in the correct order. As you can see there are two display (Intel and ATI) drivers. Make sure that you have chosen the right way. Drivers LAN and WLAN are also there. Just start with the setup.exe file and follow the instructions to facilities.

  28 "COLLECTION" - the drivers for this device are not installed.

• HP PAVILION A1007W: NEED DEVICE DRIVER FOR THE CONTROLLER ETHERNET FOR HP PAVILION A1007W DESKTOP / WINDOWS OPERATING SYSTEM 7

  Hi all!

  I have a HP PAVILLION a1007W desktop, which took the windows xp operating system.  I installed the windows 7 Home premium operating system and have found that I can't get online.

  Device Manager tells me that the driver for the multimedia audio controller is missing as well as the driver of ethernet controller.  The driver needed is:

  PCI VEN_1039 & DEV_0900 & SUBSYS_2AO4103C.

  I HAVE LOOKED EVERYWHERE AND CAN NOT FIND THE NECESSARY DRIVER.  Of course, the PC doesn't help if I can't get online.

  Any help will be greatly appreciated!

  Thank you, Pat

  Hello:

  I try the XP driver and try to install manually if auto installation does not work.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-29695-1 & CC = US & DLC = in & LC = on & os = 228 & Product = 501309 & sw_lang =

• Satellite M70-122: Question about the necessary drivers for Win XP Pro

  Hello
  I formatted my Satellite M70-122 in order to install Win XP - Pro and so I lost all drivers and programs pre installed. It seems that the recovery CD is of no use in this case, and I was wondering if there was a driver CD, I could order.
  I found the drivers (62 so far) for my machine on the Toshiba site and I was as well, I was wondering if I should download and install all. What about programs like the CD/DVD burner?
  Where can I get them back?

  Thank you.

  Christophe

  Hello

  The Tools & Utilities CD but that contains all the necessary drivers is not delivered with the unit, can be created by the user himself. If the unit is installed with recovery media you can find under Toshiba assist > protect & difficulty > create CD drivers & tools.

  All these drivers, tools & utilities that you can use for your own installation. Otherwise you need to download them from Toshiba download page, and please check the instructions facilities document and install all things in order. Order of the facilities is very important.

  Good luck!