Pavillion DV7 4077 cl: BSOD when starting windows 7

Similar Questions

• IMAQ.dll error when starting Windows

  Hello

  I have a little problem with Labview 8.6. After you have installed the driverpack for the dvd, my windows give my error

  Der Prozedureinsprungpunkt wurde in DLL "IMAQ.dll" non found "ProgramFPGAs".

  My tranzlation

  the "ProgramFPGAs" entry point is not found in the Dll "Imaq.dll.

  LabVIEW start racing without problem, only this message at windows start is boring.

  someone has an idea to solve the problem or at least stop that messagebox

  Thank you

  Hi DRhatje.

  Hello and I hope that your well today. Thanks for your post.

  I think it's a pretty good translation, the error message I thought lie in the below knowledge base article.

  The cause suggested for the error is that the IMAQ.exe is defined (by default) to boot at startup. But if you don't have a capture framer installed on the machine card then we could well see this error. The solution is to delete the exe file of the list on your system. The steps to do this is listed in the link below, but in short.

  Section in the screenshot you sent me, you should be able to select the "selective startup", then go to the "Startup" tab and uncheck the IMAQBoot.exe.
  If this restores the default settings on reboot, it's probably an indicator that your administrator rights on this PC are limited.
  I think that a quick way to check is to go to start > run and type "regedit". It is essentially a more advanced method to handle similar settings, but if you do not have Admin on the PC rights then you would most likely be denied access. In all cases, ask one of your colleagues in COMPUTING to use their passwords and change this setting. It will get rid of this warning you are seeing until you start to use our materials of industrial Vision and need to reactivate it.

  Make sure you click on 'Apply' before leaving this utility.

  Why do I get "IMAQBoot.exe - Entry Point not found" error when I restart computer?

  http://digital.NI.com/public.nsf/allkb/AD70B1036D5B950B8625752400578CFE?OpenDocument

  This should at least remove the error message when starting upwards.

  Please let me know how you and I hope this helps!

• IoWMIOpenBlock failed when starting window is up

  I have to write code for the device driver that is need to interview some SMBios information in order to make some adjustments. I use the IoWMIOpenBlock function to access the WMI and IoWMIQueryAllData class to query the SMBios data. On Windows 7, it seems that the service is correct and the information can be queries return successfully.

  However, on the other window for example POSReady, XP, this function having some problem. When the window is starting is loading the driver, the function will return the GUID not found status. However, after starting the window upwards and I have try to disable and enable the device in Device Manager, the service works well without any problem. I try to get online but it looks like that there is not a lot of information about this. And I try to use these function when AddDevice.
  Can anyone help?

  Hi myun,.

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• Blank Screen when start Windows normally

  original title: white screen

  I can only run Vista in Mode without failure. When I run normally, I get a blank with a slider screen once I connect. Any suggestions?

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

• Error when starting Windows Vista

  "This application has failed to start because BHO.". DLL was not found. Reinstalling the application may fix this problem.

  and

  "IE3SH Application has stopped working properly. Windows will close the program and notify you if a solution is available. »

  and

  When you open a tab in Windows Explorer I get a "Script error, do you want to keep running the script, yes or no?"

  Hi Buster12345,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. you get script errors in Explorer Windows or internet explore?

  It is possible that some third-party programs installed on the computer causes the error at startup.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  See the Microsoft article below as well as try the steps mentioned if you are referring to internet explore.

  How to resolve script errors in Internet Explorer on Windows computers

  http://support.Microsoft.com/kb/308260

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A210 - 1 4 frequently freezes when starting Windows 7

  Hello

  I have a laptop Toshiba Satellite A210 - 1 4 and updated upgraded to Windows 7 later. I have a problem in which case frequently the OS crashes during startup. This often happens and happens after the text "Starting Windows" appears, but before the windows logo appears. In this case I have to press CTRL + ALT + DELETE to reset the system and bring back to life, Windows 7 starts normally after that.

  I tried to reinstall Windows 7 and it still does not work. I use the 32 bit version if that makes a difference. I installed all the drivers of Toshiba using the [Toshiba Software Installer | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/downloadDetail.jsp?soid=2475695&pf=true] and the problem still persists.

  Thanks in advance,
  Caleb

  Hello

  Recommends checking the HARD drive first.

  There is a nice tool called Drive Fitness Test which can be downloaded from some 3rd party pages.
  The tool is free and helps you run HARD drive Diagnostics tests.
  If the HARD drive is ok, then the next step should be checking the RAM.

  Tools such as memtest86 + could be used to test the memory.

  But even if there is no error, the RAM could be affected again I recommend that you test the new notebook with Rams

  By the way: check if the BIOS is up to date!

• Re: Satellite L300-1AP BSOD when installing Windows XP

  I have a new L300-1AP and would like to intall XP Pro but when I try it I get the stop message 0x0000007b.

  Made a new installation disc integrated with all updated sata drivers, I still get the message. I'm not sure about how I would install drivers of third party on the F6 function because it has not a diskette and cany to find how to do the same thing in a CD anywere.

  I appreciate that we should all try to use the vista OS that came with it, but it is a problem of compatibility with older software that I use.

  Can anyone help please?

  In the Microsoft Knowledge Base is an article about it:
  http://support.Microsoft.com/?scid=kb%3ben-us%3B324103&x=17&y=8

  I think that there is something wrong with the SATA drivers. My Satellite L300 works with XP without problems or BSOD when installing.

  The SATA drivers are in this package, and the Intel Storage Manager you can download on the Toshiba site.
  You can create your own installation with nLite (http://www.nliteos.com/) disc.
  If I have integrated the SATA drivers, you do not have to press F6. The HARD drive will be automatically recognized.

• Pavillion dv7 laptop win7 freezes when you unplug ac pwr, need to start, will not start on the MTD

  I just bouht this laptop 2 months ago. It has been refurbished. Initially he had problems running and I have to hard start a few times to get it going.  I followed some instructions a previous forum solution sp44983 17/10/12, and it seemed to work.

  I have problems with the gel to the top when I unplug the AC adapter. I followed some other instructions of the forum which was from may 2012.

  10/05/2011-14:32

  Re: Anyone at - he discover blank (black) screen & freeze after cutting off the power supply, then reconnectOptions

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER. sfc/scannow (note there is a space between sfc and /) leave the entire process, then type exit and press ENTER.

  Then, stop the laptop, unplug the AC adapter unplugged, remove the battery and then press and hold the power button for a minute.

  Now plug the power adapter without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for batteries, click right on and the Microsoft ACPI compatible with battery control method and select uninstall - do not uninstall anything else here.  When the uninstall is complete, shut down the PC, unplug the AC adapter, reinsert the battery and then start the PC on just the battery.  Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the PC again.  Now plug the power adapter (with the inserted battery always) and start the laptop to see if it helped the issue at all.

  Download the graphics driver on the link below Installer and save it on your desktop. ftp://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52242.exe once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  When you are done, reboot the laptop.

  Sorry for you so

  Product name: HP Pavilion dv7 Notebook PC

  Windows 7 Home Premium 64-bit Service Pack 1

  Serial number: {content removed}

  Product number: A7B11UAR #ABA

  Has been no change. I have

  See you soon,.
  Shane

  After doing some research on this issue, that's what I could find. The problem is caused by the regulatory basis on the motherboard chips when they become defective. When these chips become defective, it fails to regulate the proper voltage required by the processor, causing the processor to this effect a malfunction when a card is inserted in the power socket.

  Your best bet would be to take it to a computer repair shop that can repair it for you. If you are in warranty, I would contact HP to fix it for you.

• Tecra A2 - BSOD when installing Windows

  Hello

  I have a Tecra A2, I have not used for some time. I decided to start again and he gave me the blue screen of death just after loading Windows XP (before selecting your user profile). He continues to do so after I restarted several times, so I decided to reformat the computer.

  I have reformat the computer and Windows XP begins to resettle. After installing I go through all issues of installation such as name, country, time zone, recording etc.. After that's done, I get the blue screen of death again. I restart the computer and it tries to load Windows XP. Then he told me that "the system is not fully installed. Please run Setup again. "Then he gives me the blue screen of death.

  Rereformating laptop computer does exactly the same thing as the first time. So I tried to boot the computer with the recovery discs, and that did not help. He finished just gives me the blue screen of death.

  Can someone help me?

  Steve

  Hello!

  I agree with Akuma. You should post the BSOD code because there are many of them. If you have the BSOD code, you can search in the Mircorosft Knowledge Base. Often you can find an article on this issue.

  In my view, it could be a HARD drive or RAM problem, but together you can check with special tools. Use Memtest86 for RAM and the aptitude Test drive to the HARD drive. The tools that you can find with Google.

  Good bye

• Office disappears after some time when starting windows 7

  When windows has started, the office disappears after about 30 seconds and a white background appear.
  I can only turn it back on when I press the windows button then the right button of the mouse and click on desktop, but everytime when I start a new program, I have the same problem again. He nerves.

  Can someone help me please?

  Hello

  I'm not quite sure what could cause this but maybe you should try to change the wallpaper?

  -Right click on the desktop,
  --Select Customize and then you can see the background option to display at the bottom of the customization window.

  Check it!

• BSOD when starting the Satellite C

  My laptop crashed today, and because that everytime I restarted my laptop, a blue screen came, I talked to technical support.
  He told me to do a HARD drive recovery I did. The laptop is still on as usual, but it too is windows service installation and stuck on the blue screen again.

  Now when I try to press F8 at startup "repair my computer" isn't there.
  Please help, really need to work again :)

  Hello

  > Now when I try to press F8 at startup 'repair my computer' is not there.
  It seems that you didn't create a floppy disk for recovery in the past. Right?
  Well, it means that you must order this disc, if you want to retrieve the laptop once more.

  + But back to the question BSOD: +.
  BSOD may appear due to a software problem or hardware problem.
  If the BSOD could not be resolved by retrieving the notebook, then I suppose that the material is affected.

  In General, s for Toshiba laptop technician should check if the recovery procedure is not possible, or if something goes wrong after picking up the device.

  In my opinion, the HARD drive and RAM should be tested at the first step.
  If you wish, you can download the tool called Drive Fitness Test that would test the HARD drive. You can also remove one of the RAM modules, and it could test it in each memory slot.

• Tecra M3 PTM30A: BSOD when starting - how to reinstall Win XP?

  Hey

  I have a Toshiba Tecra M3 PTM30A-029002 model number and iv recently met with a problem which I think has a virus.

  When I start computer normally it goes to the XP loading screen then goes to a blue screen saying stop: c000021a (fatal system error)' and just stay on the screen until I got disabling. This happens every time

  When I tried to start in safe mode it put all these numbers and letter then it just restarts.

  I was told to use my windows XP CD recovery but I don't know how to reboot from the cd. I press F2 at the beginning and the Red Toshiba logo comes up with these different pictures of the bottom to select and I've tried them all but none work

  Please help I need this problem as soon as possible because this isn't really my own thanks for laptop

  As far as I know it of not possible to start from a shared CD/DVD external USB drive!
  Need an external CD/DVD drive with PCMCIA card that could be more expensive than a CD/DVD drive is internal.
  So I recommend you to choose the internal CD/DVD drive, supported.

  However, I put t know if you tried to boot from the CD correctly.
  The point is that you must press the F2 key, but you must press the F12 key to get the boot on the screen menu.
  Choose the ODD (CD/DVD) as a source of start-up, then attempts to boot from the recovery CD Toshiba.

  Check this box!

• Why does the runtime error-2147217398(8004100a) appear when starting windows xp?

  whenever I boot windows xp an error message runtime error - 2147217398 (80004100a).

  why it is happening?

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the full and exact error message?

  Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

• Why is my cpu running fast when starting windows in safe mode?

  I am running windows xp sp3 when I start my computer in safe mode, which looks like it is about to spin out of control. Does anyone know why this is?

  So if I understand correctly, you do not have this problem if you start normally in Windows; It's only when you play online or when you start in safe mode?

  Most likely your disk defragment tool automatically runs it to scan your drive manually, it said: it is not necessary.
  When you say that the noise that's going to turn out of control are you sure it's the hard drive that you hear? Did you open your computer case to check?
  Usually you can hear only the hard disks if they are read or write and it sounds more like a sound of scratching sound of spinning. Most of the modern hard disks is inaudible and is very hard to hear.
  What is strange, is that you say that is happening in mode safe, but don't not after booting normally. In most cases, it is the opposite where it happens normally, but not in safe mode.
  If all goes well, after further clarification, I have more ideas.

• Pavilion TX2623: Laptop hangs when starting Windows

  Hello

  When I start the laptop, I see the HP logo, the blue window of Microsoft and the white dots turning in a circle and then everything freezes after 5 seconds or more. If I force the power off I can restart without problem. At the start, I can hear the fan, player and I see that the player accesses (blue led).

  I tested the memory and the disk with tools (diagnostic) which you can access from the start. The results were very good.

  I did a hard reset, search the forum for similar problems.

  What bothers me is the fact that force a shutdown will lead to a normal start. For several days, the model has been the same. Computer hangs at the first attempt, I force shutdown and then everything works fine.

  Any idea?

  Concerning

  I managed to find a solution.

  It seems that the fast start feature is at the origin of the problem. I turned he took and no more freezing, at least so far (several departures and stops without problem).