IoWMIOpenBlock failed when starting window is up

Similar Questions

• HP G60 laptop OEM Vista h. Prem startup failed to start Windows. A recent hardware or software change might be the Cause. ... Running in a State of Limited Diagnostic... »

  I have a 4 years old HP G60-235DX computer laptop Vista Home Premium OEM factory installed.  I had been doing the blue screen of death the last 8 months.  On Tuesday afternoon, I ran ChkDsk.  It was taking too long so I hit the power button.  now on startup, a message indicates "Windows Failed To Start."  A recent hardware or software change might be the Cause. "I tried to restore it to 4pmPST (Tuesday 7/2), but he sent the message:"your computer is running In A Limited Diagnostic State.  If you use the system restore in this Limited State, you can't undo the restore operation. "Expert Microsoft at the reception of the answer took me by (attempt), safe mode safe mode with network (failed attempt), last known good configuration (failed attempt).   He said that he needs me to order a HP recovery disk because the Vista system files are corrupted, damaged or missing.   Does this sound correct?  Try to get a good HP # order JUST a recovery disk.   I was the victim of the "have you tried to fix your own computer without HP offers you a recovery disk?   This is what happens when you try to fix it yourself without HP offers you a recovery disk. »

  Thank you.
  Skynet

  Your CV has been provided with a score of hidden restore and HP provided instructions on how to create the recovery disks

  http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&LC=en&DLC=en&docName=c00809678

  If you know the brand of the hard disk on the system, this disc has a free disk bootable verification utility, if you do not know the Player try to WD's SeaTools

  http://www.Seagate.com/GB/en/support/downloads/SeaTools/

• Error when starting Windows Vista

  "This application has failed to start because BHO.". DLL was not found. Reinstalling the application may fix this problem.

  and

  "IE3SH Application has stopped working properly. Windows will close the program and notify you if a solution is available. »

  and

  When you open a tab in Windows Explorer I get a "Script error, do you want to keep running the script, yes or no?"

  Hi Buster12345,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. you get script errors in Explorer Windows or internet explore?

  It is possible that some third-party programs installed on the computer causes the error at startup.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  See the Microsoft article below as well as try the steps mentioned if you are referring to internet explore.

  How to resolve script errors in Internet Explorer on Windows computers

  http://support.Microsoft.com/kb/308260

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• IMAQ.dll error when starting Windows

  Hello

  I have a little problem with Labview 8.6. After you have installed the driverpack for the dvd, my windows give my error

  Der Prozedureinsprungpunkt wurde in DLL "IMAQ.dll" non found "ProgramFPGAs".

  My tranzlation

  the "ProgramFPGAs" entry point is not found in the Dll "Imaq.dll.

  LabVIEW start racing without problem, only this message at windows start is boring.

  someone has an idea to solve the problem or at least stop that messagebox

  Thank you

  Hi DRhatje.

  Hello and I hope that your well today. Thanks for your post.

  I think it's a pretty good translation, the error message I thought lie in the below knowledge base article.

  The cause suggested for the error is that the IMAQ.exe is defined (by default) to boot at startup. But if you don't have a capture framer installed on the machine card then we could well see this error. The solution is to delete the exe file of the list on your system. The steps to do this is listed in the link below, but in short.

  Section in the screenshot you sent me, you should be able to select the "selective startup", then go to the "Startup" tab and uncheck the IMAQBoot.exe.
  If this restores the default settings on reboot, it's probably an indicator that your administrator rights on this PC are limited.
  I think that a quick way to check is to go to start > run and type "regedit". It is essentially a more advanced method to handle similar settings, but if you do not have Admin on the PC rights then you would most likely be denied access. In all cases, ask one of your colleagues in COMPUTING to use their passwords and change this setting. It will get rid of this warning you are seeing until you start to use our materials of industrial Vision and need to reactivate it.

  Make sure you click on 'Apply' before leaving this utility.

  Why do I get "IMAQBoot.exe - Entry Point not found" error when I restart computer?

  http://digital.NI.com/public.nsf/allkb/AD70B1036D5B950B8625752400578CFE?OpenDocument

  This should at least remove the error message when starting upwards.

  Please let me know how you and I hope this helps!

• Failed to start Windows Media Player without updating to a new version

  original title: Windows Media Player does not work.

  When I try to start Windows Media Player, it says I have a newer version installed but I can not find anywhere on my computer.  How update WMP for Vista Ultimate SP2?

  When I try to start Windows Media Player, it says I have a newer version installed but I can not find anywhere on my computer.  How update WMP for Vista Ultimate SP2?

  To manually check for updates: -.

  Click on the Help menu, and then click Find updates.

  To set how often the Player automatically checks updates: -.

  1. Click the arrow below the now playing tab, and then click More Options.

  2. On the drive, under Updates tab, click the interval option that you want.

  To solve the problem: -.

  Go to start - > in the start search box type - > regsvr32 wmp.dll

• Failed to start windows recovery

  Compaq cq56-115dx. This is my sencond attempt to try to do a system restore with the HP recovery discs, I just got. Recovery starts with a message "loading files". Then, I get a message "starting windows." And, that's all. Two hours later the windows icon is always on the screen and nothing else happens. I tried several times and each time it hangs on the windows splash screen. For information on the first original attempt to perform the recovery, I was actually quite successful and made it through all three discs. I got a message to restart the computer to complete the installation. When I did the reboot I got an error message that windows cannot restart and I needed to redo the installation. I don't remember the exact wording. I guess I could have gotten a bad file or something and frustrated to lose several hours, I started the second recovery attempt. Now, as mentioned, I'm just hung up on the 'starting windows' screen Before the takeover, the computer was running. Now it won't start, message "windows couldn't start.

  I removed the battery and unplugged the computer for about 5 minutes. Tried recovery, and it does not work as it should now. Not sure why it works now, but he did.  I tried at least six times before that, and he continued to cling on the gray screen.

• Blank Screen when start Windows normally

  original title: white screen

  I can only run Vista in Mode without failure. When I run normally, I get a blank with a slider screen once I connect. Any suggestions?

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

• Failed to start Windows 7, not found Boot Manager?

  I have a Sony Vaio VGN-SR26GN with Windows 7 32 bit installed.

  He froze, ctrl + alt + delete does not work I turned it works but it was not able to start windows, all I ended up with is a black screen with cursor mobile, even with safe mode.

  I tried recovery, known last good configuration, etc... but nothing has worked

  Then I started getting the blue screen of death with the BOOT MANAGER NOT FOUND or something of the sort

  I tried to use the CD to repair windows 7 but it couldn't detect any installation of windows or another partition... I tried the bootrec different commands but nothing worked

  Now when I turn on the computer, it will start the Vaio repair utility, open a blue screen and nothing happens for hours.

  I don't know if it is a hardware or software problem. What else can I try to do?

  Thank you

  Hello

  References to Vista also apply to Windows 7.

  It is a serious mistake and "may" not be fixable without a professional technical support
  a real computer store (not the leeks and the glances at a BestBuy or other BigBox stores) or your
  Support of the machine system.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  ---------------------------------------------------------

  This is the troubleshooting methods to try to resolve the problem:

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Recover the Vista or Windows 7 bootloader from the DVD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVD

  Recovering the Vista Bootloader with EasyBCD (Windows 7)
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCD

  Fix the Vista Bootloader of Windows (Windows 7)
  http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader

  ------------------------------------------------------------

  Unable to boot into windows vista-windows boot configuration data file is missing required
  information - Repair Corrupt Boot Manager (Windows 7)
  http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and
  problems starting in Windows Vista (Windows 7)
  http://support.Microsoft.com/kb/927392

  How to fix "BOOTMGR is missing" in Windows Vista (Windows 7)
  http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.html

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is.
  missing required information"(Windows 7)
  http://support.Microsoft.com/kb/927391

  Vista tip: Fix error "BOOTMGR is missing" - a quick way to (Windows 7)
  http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-error

  See this article here - to repair/rebuild the Boot (Windows 7) Bootrec.exe tool configuration data use
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  =========================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  If you need to repair disks - these help repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Failed to start Windows Media Player - Version problem

  Hi all

  When I try to start Windows Media Player, I get the following error:

  the wmplayer.exe file has a version number of 12.0.7601.18526 where 12.0.7601.17514 was expected

  I used WMP on this machine before with no problems, probably most recently about a month ago. I have automatic updates on so I don't know exactly when this problem started. I tried to uninstall/reinstall WMP, but this has not led to no success.

  Here, any help would be great.

  Thank you

  Hi Chris

  Another Member had exactly this problem there is little time. Try following the procedure here...

  Greetings - R

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-Media-Player-not-installed-properly/73897943-3707-4c10-98d1-66b62c28f074

• Satellite A210 - 1 4 frequently freezes when starting Windows 7

  Hello

  I have a laptop Toshiba Satellite A210 - 1 4 and updated upgraded to Windows 7 later. I have a problem in which case frequently the OS crashes during startup. This often happens and happens after the text "Starting Windows" appears, but before the windows logo appears. In this case I have to press CTRL + ALT + DELETE to reset the system and bring back to life, Windows 7 starts normally after that.

  I tried to reinstall Windows 7 and it still does not work. I use the 32 bit version if that makes a difference. I installed all the drivers of Toshiba using the [Toshiba Software Installer | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/downloadDetail.jsp?soid=2475695&pf=true] and the problem still persists.

  Thanks in advance,
  Caleb

  Hello

  Recommends checking the HARD drive first.

  There is a nice tool called Drive Fitness Test which can be downloaded from some 3rd party pages.
  The tool is free and helps you run HARD drive Diagnostics tests.
  If the HARD drive is ok, then the next step should be checking the RAM.

  Tools such as memtest86 + could be used to test the memory.

  But even if there is no error, the RAM could be affected again I recommend that you test the new notebook with Rams

  By the way: check if the BIOS is up to date!

• Failed to start Windows

  I have a packard bell easynote, which starts well but when I connect I get a message saying "windows startup failed. Press ok for the difficulty "." When you click ok the diagnosis of disc box comes with two boxes checked. Once the disk check is complete, I get a message telling me that there is a hard drive error and I need to download the drivers to fix the problem. f I say yes the computer does nothing. If I say no, he goes for the diagnosis of disc again. Any ideas how to fix this?

  Hello

  ·         Have you received an error message?

  I suggest you follow the below methods that can help you solve your problem:

  Method 1: Try to start your computer in last known good configuration.

  Method 2: I recommend that do you the Startup Repair.

  To perform a Startup Repair follow these steps:

  Startup Repair: frequently asked questions

  http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx

  Method 3: If the method above does not work, try the link below:

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

  Hope that helps, I look forward to hearing from you.

  Kind regards

  Ramata Thakur.

• L7680 installation fails when reinstalled windows because it needs administrator rights, but it is

  I had some problems with my laptop with Windows 7, so I did a windows repair (not a clean reinstall).  Now my Officejet pro L7680 works as a printer, but many features do not work, and the HP Solution Center starts. So I tried to reinstall the center of HP solutions from the original disk, but it fails because it must be in administrator mode.  BUT IT IS IN ADMINISTRATOR MODE! I have rebooted, tried safe mode, close the printer/disable... stil can't install HP.

  Hi foxyjoe,

  What was the reason behind the windows repair?

  It is possible since you reinstall from scratch you have still some problems with your operating system. Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=2512009

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11. start the L4uninstall.exe

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• Office disappears after some time when starting windows 7

  When windows has started, the office disappears after about 30 seconds and a white background appear.
  I can only turn it back on when I press the windows button then the right button of the mouse and click on desktop, but everytime when I start a new program, I have the same problem again. He nerves.

  Can someone help me please?

  Hello

  I'm not quite sure what could cause this but maybe you should try to change the wallpaper?

  -Right click on the desktop,
  --Select Customize and then you can see the background option to display at the bottom of the customization window.

  Check it!

• Failed to start Windows after the installation of updates

  HI, I currently use windows 7 32-bit and have been almost half a year now, nothing was wrong with it until just recently when I installed updates for windows and it goes across restart process. Whenever it restarts after the installation of updates it now in windows could not start and is system launch of repairs etc, when it finishes I cliquerai on end to end and then he launched startup correctly, also, I realize account updates, I have install are successful, when I connect (from the option view update history) , but I get suggestions of exact same update again just after the installation of the updates mentioned only, hope, it is specific help enough, would be much appreciated

  Can you provide the names, the updates that have been installed?

  see this article for when you are offered the same update again and again:
  http://support.Microsoft.com/kb/910339

• Why does the runtime error-2147217398(8004100a) appear when starting windows xp?

  whenever I boot windows xp an error message runtime error - 2147217398 (80004100a).

  why it is happening?

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the full and exact error message?

  Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.