PC Companion said "no Xperia backup was found on your computer.

Hello

Just got a replacement M4 Aqua (as previous phone had the problem of the infamous "microphone has stopped working", and before putting my SIM card and MicroSD card in the phone again, I did a full backup using software Sony PC Companion.)  I can see several backup files to my PC, but when I run backup/restore or transfer Xperia in PC Companion feature, the message "no Xperia backup was found on the computer" comes up and gives me no option at all for say software where the baclkup files.  How can I me PC Companion to correctly locate the file back?  It is not very useful as a tool to transfer, if it doesn't let me tell him where the backup files to my PC!  Help, please.  Thank you.

Best wishes

Adrian

Sorry to hear that the microphone works on your phone.

When you open "back & restore" in PC Companion, you should have a '+' in the box that says normally the list of files to backup. Click this button, and then locate the backup file you want to import.

Tags: Sony Software

Similar Questions

  • Windows Movie Maker cannot be used because the required audio hardware cannot be found on your computer.

    Windows Movie Maker cannot be used because the required audio hardware cannot be found on your computer.

    Help, please.

    original title: MM not working,.

    Laughing out loud!

    I found the awnser!
    It was two things,
    I have a dell and in some sort when I returned to XP SoundMAX Digital 7 Starter was deleted,.
    Then I got the thing plugged into the wrong entrance!

  • The diagnostic image not found on your computer

    We had this HP computer for about 3 weeks and I tried to create a backup disk according to the instructions for "tune up your computer.  I get the same error message "the diagnostic image is not found on your computer.  Please contact HP support.  Our computer is HP x 2301-suggestions anyone?

    OK, I found the desktop HP Pavilion HPE h8 - 1250a.

    You must have HP Vision Hardware Diagnostic Tools installed on the computer when you bought it. With it, you can make the Diagnostics bootable cd.  Search for HP Vision diagnostic material in your programs on the start menu. Or you can type it into the search box of the start menu and it will appear if installed.

    If it is not installed or you think you may have removed it it can be re installed using the Recovery Manager.

    http://support.HP.com/US-en/document/c03132174=

  • Need to download adobe but he said «this type of file can harm your computer»

    My daughter wanted to play a game on the internet, but to play it said she had to download Adobe. When she clicked on the "Download" there was a warning: "this type of file can harm your computer" and something about modules and Active X.  Someone would please good enough to explain what it means at all?  It is allowed to download or not?

    It is a general warning to make you think about what you install when asked to install things from the Internet. If you expect to install something, it is generally safe, such as Adobe Flash. Be ever vigilant when on the Internet!

    For your convience, here is the file to install Adobe Flash on your computer: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe

    When you click on that, save the file to your hard drive, and then close all Internet Explorer Windows. Run the downloaded program to install Adobe Flash.

    When you run Internet Explorer again, it may ask you to allow Flash to run. You can say okay.

  • warning Trojan horse (trj.dealware.stealth) was injected into your computer - it popped in my Mac OS Xis he fake?

    He also said: Firefox browser has detected a new virus. AND: Immediately call the number provided will result in computer failure. The phone number is 1-888-*-*.

    Edit: removed malicious number. (philipp)

    Thank you, should I remove the link to the previous question? Or will you?

  • My backup was interrupted... I have to start all over again?

    I just bought my laptop and when I turned it on it told me I had to backup everything and had a program to follow me.  I kept it on a disc.  I was on the #9 drive when the backup was interrupted and my computer was turned off.  The problem I have is only a window pop up lights now telling me to back up my computer and when I start to do that it tells me to insert disk 1.  What I need to all start over and lose 9 discs or is there a way I can start the rear disc 10?

    Thanks for your help.

    You have to start to drive #1.

    "nicstor3" wrote in the new message: * e-mail address is removed from the privacy... *

    I just bought my laptop and when I turned it on it told me I had to backup everything and had a program to follow me.  I kept it on a disc.  I was on the #9 drive when the backup was interrupted and my computer was turned off.  The problem I have is only a window pop up lights now telling me to back up my computer and when I start to do that it tells me to insert disk 1.  What I need to all start over and lose 9 discs or is there a way I can start the rear disc 10?

    Thanks for your help.

  • He said paying $200 or your computer will be locked.now it won't get past "loading windows files" it goes to Administrator:cmd.exe

    He said paying $200 or we will lock your computer permanently

    He said paying $200 or we will lock your computer permanently

    One of the users of the Forum answers maintains that a great guide on information security is important for understanding 'ransomware' removal.  See the following compliments of Brian M - for suggestions on how to solve your problem: http://www.selectrealsecurity.com/remove-ransomware/

    And/or

    See: http://www.bleepingcomputer.com/virus-removal/remove-police-central-e-crime-unit-reveton-ransomware

    General information on this type of scam malware can be found here: http://krebsonsecurity.com/tag/reveton/

    Good luck...

  • I was called by someone who said that I had a problem with my computer

    original title:

    I think I was a victim of a SCAM, a solution Windows online Eric called me to say that I had a problem with my computer.  He had me to enter a code (key Windwos more R entered eventvwr and gave me all the error messages that have been sent to microsoft.)   He had a technician take over my computer to see if the software layer of secruity has been exceeded, the technician SAIS Yes and wanted me to buy a new title for my windows XP to 120.00.    I said no. I have his contact details, it was California.

    How has this affected my computer?

    Remove all error events that affect the system?   to see u windows touch R and then type eventvwr.

    Microsoft can verify the software layer of security to see it really happened to expire?

    Hello

    Its a total scam. Uninstall their software and then perform a system restore before you install.
    Change all your sensitive passwords at all sites - e-mail, Bank, credit cards and others. (Do not
    on the computer compromise and it would be better to do it on the phone or in person.)

    You can even restore your system to factory fresh to make sure their software violates not
    your security. (Ways to re - install Windows Clean - removing everything on the backup drive so all the data
    before hand.)

    ====================================================================
    ====================================================================

    In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
    Watch groups. Arm yourself with knowledge.

    No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
    computer. So that's the fraud or scams to get your money or worse to steal your identity.

    Do not fall for the fake phone Tech Support
    http://blogs.msdn.com/b/securitytipstalk/archive/2010/03/09/Don-t-fall-for-phony-phone-tech-support.aspx

    Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
    phone calls to help you fix your computer
    http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

    Scams and hoaxes
    http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

    Microsoft Support Center consumer
    https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

    Microsoft technical support
    http://support.Microsoft.com/contactus/?ws=support#TAB0

    Microsoft - contact technical support
    http://Windows.Microsoft.com/en-us/Windows/help/contact-support

    ===========================================================
    ===========================================================

    Follow these steps carefully:

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be more difficult to detect as the
    cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
    check with the other methods below.
    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/products/malwarebytes_free

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    -----------------------------------

    Original version is now replaced by the Microsoft Safety Scanner
    http://OneCare.live.com/site/en-us/default.htm

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    ----------------------------------

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    RUN - type in the box-

    sfc/scannow

    Then run checkdisk (chkdsk).

    RUN - type in the box-

    Chkdsk /f /r

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    ================================

    For extreme cases:

    Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
    This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
    uses aggressive methods to detect these threats, there is a risk that it can select some
    legitimate programs for removal. You should use this tool very carefully and only after
    you have exhausted other options.
    http://us.Norton.com/support/DIY/index.jsp

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • 0x800704D3 error: the backup was not completely successful. The application has been abandoned, as he tried to take backup

    Original tile: appeared at the end of backup when the error message appeared. "The reverse was not entirely successful. The request was abandoned. (0x800704D3)

    Recently I had a problem with the combo of virus/malware.  Antivirus 2010, was then brought by an another 'guru' to download StopZilla.com who started the Delete files accompanying the computor.  I have kept and can't get rid of the problem, so decided to back up files, and then put in recovery disks.  Appeared at the end of backup files with the ninth disk, when the error message above has occurred. Is not something else.  Someone said elsewhere "make sure that the AC adapter is on"... what?  THA is the problem?

    Seen also it is suggested to get an external hardware, but what about hang the laptop to existing pc?  Would you do that?  What wiring do I need?

    Hi beltwaytraveler,

    1. you have any third-party backup program installed?

    2 have you tried to use a different backup disk?

    Method 1:

    You can temporarily uninstall third-party anti-virus on your computer protection software and then check if the problem occurs.

    Note: Be sure to install the security software on the computer after you fix the problem.

    Method 2:

    You can also try to uninstall any third-party backup program installed on the computer and try the backup.

    Method 3:

    You try to run the following command and check if all third-party services are running other Microsoft services.

    a. Click Start, click programs, accessories principally made, right click Guest and then click Run as administrator.

    If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

    b. type the following command and press ENTER:

    vssadmin list writers

    c. check the VSS writers listed.

    If you see any third-party service other than Microsoft services running, and then let us know about it.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Impossible to download the movie, receive error message: error-2002 a bad public movie atom was found in the movie.

    Original title: error-2002 a bad public movie atom was found in the movie

    I get the following message when tring to down load a short video that sent me a friend. (error-2002 a bad public movie atom was found in the movie).

    Hello

    What is the type of film that you download?  AVI, mp4 to move?

    You said he did before, hs there been changes to the system since the last time it worked?

    Anything added/removed or set to level?

    B Eddie

  • Updatususer new user on PC. The user does not appear in the user accounts. It is said that the account was 9 hrs + connected. Is this a virus or some backdoor account made kids?

    Original title: Updatususer

    I was checking the parental control to see what children are in and I found this new user in there.  The user does not appear in the user accounts.  Updatususer, is the name.

    I tried to access any information in the file, but I see no file... even if it is said that the account was 9 hrs + connected.  Is this a virus or some backdoor account made kids?

    Thank you

    It seems to be used by a program to update NVIDIA.

    http://forums.nvidia.com/index.php?showtopic=178965

  • Could not load the LR 6 on my laptop - I get "update serial number: serial number you provided is valid, but calling it a product was not found on this computer."  I downloaded, from the Adobe Web site and given the serial number when I bought L

    I'll put up a new Macbook Pro the retina, bought this week, and try to install the copy of LR 6 I bought in September 2015.  It is currently loaded on my old Macbook Pro.  I understand that my license allows me to install this on two machines;  This is particularly important now that I move from an old machine to a new one.

    I downloaded the complete file of the LR6, but when I try to install, I get "update serial number: serial number you provided is valid, but calling it a product was not found on this computer."

    I gave the serial number under my account on the Adobe website and delivered when I bought LR 6 September 2015.

    It is said to "Select a product", but only gives me options of Lightroom 1-5, not 6.  My new LR 6 license is useless just 6 months after purchase?

    I opted to buy 6 LR on perpetual license rather than a subscription monthly CC, as my country's currency is devaluing rapidly and I need to be able to afford access.  But now Adobe does not seem to recognize the validity of the copy that I own.  In fact, it is difficult to find a reference to LR 6 on the Adobe web site.

    Can anyone help?

    Thank you

    It shows the message you have purchased an upgrade license, and it asks you to select the older version that you upgraded and provide older version serial number as proof that you are eligible to use the upgrade.

    Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5

    http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

  • Downloaded Photoshop Elements, I thought, made me buy my code, then said that my code was not valid. Help, please. You want to use the product.

    Downloaded Photoshop Elements, I thought, made me buy my code, then said that my code was not valid. Help, please. You want to use the product.

    you need a serial number and the installation file.

    the former, http://helpx.adobe.com/x-productkb/global/find-serial-number.html

    the latest,

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • ESX 3.5 U4 - VCB error "another error: the requested name is valid, but no data of the requested type was found."

    I am running the following commanline...

    'C:\Program VMware Consolidated Backup Framework\vcbmounter.exe' h vimlab.ourdomain.com u Administrator password - a 192.168.1.104:winxppro01 - r C:\mnt t fullvm Pei

    2010-03-23 01:00:52.921 "BaseLibs" 3448 info HOSTINFO: See Intel CPU, numCoresPerCPU 1, numThreadsPerCore 2.

    2010-03-23 01:00:52.921 "BaseLibs" 3448 info HOSTINFO: numPhysCPUs is 0, bumping at 1.

    2010-03-23 01:00:52.921 "BaseLibs" 3448 info HOSTINFO: numCores is 0, bumping at 1.

    2010-03-23 01:00:52.921 "BaseLibs" 3448 info HOSTINFO: This machine has 1 UC physical and carrots 1 1 logical processors total.

    2010-03-23 01:00:53.687 "BaseLibs" 3448 info Using the libcrypto, version 90709F

    2010-03-23 01:00:53.687 "vcbMounter" error 3448 Error: Another error: the requested name is valid, but no data of the requested type was found.

    I'm still new to VCB, so I don't know technically what I do. The vmdk files reside on an iSCSI Lun and I point the Server 2003 Windows VCB to the LUN using the MS iSCSI initiator and he see LUN. It see it as "Healthy (Unknown Partition)", but it see IT. My guess is that it should be able to see the files in the iSCSI LUN?

    Anyway, just my SWAG (Scientific Wild Ass guess).

    Using the '-san m "switch gives the same.

    Any help on this is appreciated. I'm just trying to do a full backup of a virtual computer.

    no doubt the '-a ' option does not. You must use it as '-a name:

    Marcelo Soares

    VMWare Certified Professional 310/410

    Master virtualization technology

    Globant Argentina

    Review the allocation of points for "useful" or "right" answers.

  • PLSQL procedure with the ORA-01858: a non-digit character was found where

    Hi friends,
    I'm pretty much back to the plsql programming. I am creating the plsql procedure that basically accepts the values of variables and controls difference of two columns if she's even if different it inserts values into the temporary table GTT_S_DOC_QUOTE, and then inserts data into another table in s_doc_quote please help me or correct my procedure.
    Since I'm getting below error ORA-01858: a non-digit character was found here where waiting a digital .my procedure is as below.
    CREATE OR REPLACE PROCEDURE QUOTE_STS)

    ROW_ID_IN GGATE_CT. GTT_S_DOC_QUOTE. ROW_ID % TYPE,
    STAT_CD_IN GGATE_CT. GTT_S_DOC_QUOTE. STAT_CD % TYPE,
    PREV_STS_CD_IN GGATE_CT. GTT_S_DOC_QUOTE. PREV_STS_CD % TYPE,
    BU_ID_IN GGATE_CT. GTT_S_DOC_QUOTE. BU_ID % TYPE,
    CREATED_IN GGATE_CT. GTT_S_DOC_QUOTE. CREATED % TYPE,
    X_CRRNT_TOT_AGRD_RMS_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_TOT_AGRD_RMS % TYPE,
    X_CRRNT_TOT_BLCKD_RMS_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_TOT_BLCKD_RMS % TYPE,
    X_CRRNT_TOT_PCKDUP_RMS_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_TOT_PCKDUP_RMS % TYPE,
    X_CRRNT_TOT_PCKDUP_AVGRT_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_TOT_PCKDUP_AVGRT % TYPE,
    X_CRRNT_TOT_BLCKD_AVGRT_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_TOT_BLCKD_AVGRT % TYPE,
    X_CRRNT_CNTRCT_SR_REVN_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_CNTRCT_SR_REVN % TYPE,
    X_CRRNT_CNTRCT_FD_REVN_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_CNTRCT_FD_REVN % TYPE,
    X_CRRNT_CNTRCT_BEV_REVN_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_CNTRCT_BEV_REVN % TYPE,
    X_CRRNT_CNTRCT_RM_REVN_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_CNTRCT_RM_REVN % TYPE,
    X_CRRNT_USD_EXCHNG_RT_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_USD_EXCHNG_RT % TYPE,
    X_CRRNT_CNTRCT_OTHR_REVN_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_CNTRCT_OTHR_REVN % TYPE,
    X_CRRNT_CNTRCT_RSRC_REVN_IN GGATE_CT. GTT_S_DOC_QUOTE. X_CRRNT_CNTRCT_RSRC_REVN % TYPE,
    LAST_UPD_IN GGATE_CT. GTT_S_DOC_QUOTE. LAST_UPD % TYPE)

    BEGIN

    IF (PREV_STS_CD == STAT_CD) then
    END if;
    INSERT INTO GTT_S_DOC_QUOTE)
    ROW_ID,
    STAT_CD,
    PREV_STS_CD,
    BU_ID,
    CREATED,
    X_CRRNT_TOT_AGRD_RMS,
    X_CRRNT_TOT_BLCKD_RMS,
    X_CRRNT_TOT_PCKDUP_RMS,
    X_CRRNT_TOT_PCKDUP_AVGRT,
    X_CRRNT_TOT_BLCKD_AVGRT,
    X_CRRNT_CNTRCT_SR_REVN,
    X_CRRNT_CNTRCT_FD_REVN,
    X_CRRNT_CNTRCT_BEV_REVN,
    X_CRRNT_CNTRCT_RM_REVN,
    X_CRRNT_USD_EXCHNG_RT,
    X_CRRNT_CNTRCT_OTHR_REVN,
    X_CRRNT_CNTRCT_RSRC_REVN,
    LAST_UPD
    )
    VALUES ('ROW_ID_IN',
    "STAT_CD_IN,"
    "PREV_STS_CD_IN,"
    "BU_ID_IN,"
    "CREATED_IN,"
    "X_CRRNT_TOT_AGRD_RMS_IN,"
    "X_CRRNT_TOT_BLCKD_RMS_IN,"
    "X_CRRNT_TOT_PCKDUP_RMS_IN,"
    "X_CRRNT_TOT_PCKDUP_AVGRT_IN,"
    "X_CRRNT_TOT_BLCKD_AVGRT_IN,"
    "X_CRRNT_CNTRCT_SR_REVN_IN,"
    "X_CRRNT_CNTRCT_FD_REVN_IN,"
    "X_CRRNT_CNTRCT_BEV_REVN_IN,"
    "X_CRRNT_CNTRCT_RM_REVN_IN,"
    "X_CRRNT_USD_EXCHNG_RT_IN,"
    "X_CRRNT_CNTRCT_OTHR_REVN_IN,"
    "X_CRRNT_CNTRCT_RSRC_REVN_IN,"
    'LAST_UPD '.
    );

    INSERT INTO S_DOC_QUOTE_CT
    (ROW_ID_OUT, STAT_CD_OUT, PREV_STS_CD_OUT, BU_ID_OUT, CREATED_OUT, X_CRRNT_TOT_AGRD_RMS_OUT, X_CRRNT_TOT_BLCKD_RMS_OUT, X_CRRNT_TOT_PCKDUP_RMS_OUT, X_CRRNT_TOT_PCKDUP_AVGRT_OUT,
    X_CRRNT_TOT_BLCKD_AVGRT_OUT, X_CRRNT_CNTRCT_SR_REVN_OUT, X_CRRNT_CNTRCT_FD_REVN_OUT, X_CRRNT_CNTRCT_BEV_REVN_OUT, X_CRRNT_CNTRCT_RM_REVN_OUT, X_CRRNT_USD_EXCHNG_RT_OUT, X_CRRNT_CNTRCT_OTHR_REVN_OUT,
    SELECT X_CRRNT_CNTRCT_RSRC_REVN_OUT ROW_ID), STAT_CD, PREV_STS_CD, BU_ID, CREATED, X_CRRNT_TOT_AGRD_RMS, X_CRRNT_TOT_BLCKD_RMS, X_CRRNT_TOT_PCKDUP_RMS, X_CRRNT_TOT_PCKDUP_AVGRT,.
    X_CRRNT_TOT_BLCKD_AVGRT, X_CRRNT_CNTRCT_SR_REVN, X_CRRNT_CNTRCT_FD_REVN, X_CRRNT_CNTRCT_BEV_REVN, X_CRRNT_CNTRCT_RM_REVN, X_CRRNT_USD_EXCHNG_RT, X_CRRNT_CNTRCT_OTHR_REVN,
    GGATE_CT X_CRRNT_CNTRCT_RSRC_REVN. GTT_S_DOC_QUOTE;

    COMMIT;
    end if;
    end QUOTE_STS;

    I was wondering why I get this error even if I stated the PREV_STS_CD

    What line do you think that you said PREV_STS_ID on? As far as I can see that the IF statement is the first mention of it in your code. My guess is that you mean PREV_STATS_ID_IN (goes the same for STAT_CD / STAT_CD_IN).

    If you write

    IF prev_sts_cd_in = stat_cd_in
THEN
   NULL;
END IF;

do_something_here;

    then "do_something_here" will be processed regardless of the IF condition. I think what you probably wanted was something like

    IF prev_sts_cd_in = stat_cd_in
THEN
   NULL;
ELSE
   do_something_here;
END IF;

    Is it possible for the prev_sts_cd and the stat_cd null? The test above would not handle this.

    Also, as others have mentioned, the first INSERT statement attempts to insert the strings like "ROW_ID_IN" you probably want to use the value of the ROW_ID_IN parameter, which is the reason why you get the error ORA-01858. I'm guessing here of course, but I took out the quotes.

    That would make your code something like this:

    CREATE OR REPLACE PROCEDURE quote_sts
    ( row_id_in                    ggate_ct.gtt_s_doc_quote.row_id%TYPE
    , stat_cd_in                   ggate_ct.gtt_s_doc_quote.stat_cd%TYPE
    , prev_sts_cd_in               ggate_ct.gtt_s_doc_quote.prev_sts_cd%TYPE
    , bu_id_in                     ggate_ct.gtt_s_doc_quote.bu_id%TYPE
    , created_in                   ggate_ct.gtt_s_doc_quote.created%TYPE
    , x_crrnt_tot_agrd_rms_in      ggate_ct.gtt_s_doc_quote.x_crrnt_tot_agrd_rms%TYPE
    , x_crrnt_tot_blckd_rms_in     ggate_ct.gtt_s_doc_quote.x_crrnt_tot_blckd_rms%TYPE
    , x_crrnt_tot_pckdup_rms_in    ggate_ct.gtt_s_doc_quote.x_crrnt_tot_pckdup_rms%TYPE
    , x_crrnt_tot_pckdup_avgrt_in  ggate_ct.gtt_s_doc_quote.x_crrnt_tot_pckdup_avgrt%TYPE
    , x_crrnt_tot_blckd_avgrt_in   ggate_ct.gtt_s_doc_quote.x_crrnt_tot_blckd_avgrt%TYPE
    , x_crrnt_cntrct_sr_revn_in    ggate_ct.gtt_s_doc_quote.x_crrnt_cntrct_sr_revn%TYPE
    , x_crrnt_cntrct_fd_revn_in    ggate_ct.gtt_s_doc_quote.x_crrnt_cntrct_fd_revn%TYPE
    , x_crrnt_cntrct_bev_revn_in   ggate_ct.gtt_s_doc_quote.x_crrnt_cntrct_bev_revn%TYPE
    , x_crrnt_cntrct_rm_revn_in    ggate_ct.gtt_s_doc_quote.x_crrnt_cntrct_rm_revn%TYPE
    , x_crrnt_usd_exchng_rt_in     ggate_ct.gtt_s_doc_quote.x_crrnt_usd_exchng_rt%TYPE
    , x_crrnt_cntrct_othr_revn_in  ggate_ct.gtt_s_doc_quote.x_crrnt_cntrct_othr_revn%TYPE
    , x_crrnt_cntrct_rsrc_revn_in  ggate_ct.gtt_s_doc_quote.x_crrnt_cntrct_rsrc_revn%TYPE
    , last_upd_in                  ggate_ct.gtt_s_doc_quote.last_upd%TYPE )
IS
BEGIN
    IF prev_sts_cd_in = stat_cd_in
    THEN
        NULL;
    ELSE
        INSERT INTO gtt_s_doc_quote
             ( row_id
             , stat_cd
             , prev_sts_cd
             , bu_id
             , created
             , x_crrnt_tot_agrd_rms
             , x_crrnt_tot_blckd_rms
             , x_crrnt_tot_pckdup_rms
             , x_crrnt_tot_pckdup_avgrt
             , x_crrnt_tot_blckd_avgrt
             , x_crrnt_cntrct_sr_revn
             , x_crrnt_cntrct_fd_revn
             , x_crrnt_cntrct_bev_revn
             , x_crrnt_cntrct_rm_revn
             , x_crrnt_usd_exchng_rt
             , x_crrnt_cntrct_othr_revn
             , x_crrnt_cntrct_rsrc_revn
             , last_upd )
        VALUES
             ( row_id_in
             , stat_cd_in
             , prev_sts_cd_in
             , bu_id_in
             , created_in
             , x_crrnt_tot_agrd_rms_in
             , x_crrnt_tot_blckd_rms_in
             , x_crrnt_tot_pckdup_rms_in
             , x_crrnt_tot_pckdup_avgrt_in
             , x_crrnt_tot_blckd_avgrt_in
             , x_crrnt_cntrct_sr_revn_in
             , x_crrnt_cntrct_fd_revn_in
             , x_crrnt_cntrct_bev_revn_in
             , x_crrnt_cntrct_rm_revn_in
             , x_crrnt_usd_exchng_rt_in
             , x_crrnt_cntrct_othr_revn_in
             , x_crrnt_cntrct_rsrc_revn_in
             , last_upd );

        INSERT INTO s_doc_quote_ct
             ( row_id
             , stat_cd
             , prev_sts_cd
             , bu_id
             , created
             , x_crrnt_tot_agrd_rms
             , x_crrnt_tot_blckd_rms
             , x_crrnt_tot_pckdup_rms
             , x_crrnt_tot_pckdup_avgrt
             , x_crrnt_tot_blckd_avgrt
             , x_crrnt_cntrct_sr_revn
             , x_crrnt_cntrct_fd_revn
             , x_crrnt_cntrct_bev_revn
             , x_crrnt_cntrct_rm_revn
             , x_crrnt_usd_exchng_rt
             , x_crrnt_cntrct_othr_revn
             , x_crrnt_cntrct_rsrc_revn
             , last_upd)
        SELECT row_id
             , stat_cd
             , prev_sts_cd
             , bu_id
             , created
             , x_crrnt_tot_agrd_rms
             , x_crrnt_tot_blckd_rms
             , x_crrnt_tot_pckdup_rms
             , x_crrnt_tot_pckdup_avgrt
             , x_crrnt_tot_blckd_avgrt
             , x_crrnt_cntrct_sr_revn
             , x_crrnt_cntrct_fd_revn
             , x_crrnt_cntrct_bev_revn
             , x_crrnt_cntrct_rm_revn
             , x_crrnt_usd_exchng_rt
             , x_crrnt_cntrct_othr_revn
             , x_crrnt_cntrct_rsrc_revn
             , last_upd
        FROM   ggate_ct.gtt_s_doc_quote;

    END IF;
END quote_sts;

Maybe you are looking for