PC does not stop on command but will restart (XP SP3)

Similar Questions

• DVD burner does not recognize blank DVDs, but will recognize blank CD?

  I read through several similar messages, but none seem to have a solution to my problem.  I'm NOT very technically savvy, so this is as much I know:

  I have a Dimension E310

  It was supposed to come with a cd burner and a dvd burner combo.

  The reader says DVD R/RW RW DVD rewritable Compact Disk its Ultra Speed

  I was able to successfully burn CDs from itunes, but have not been able to burn any kind of video file.  In fact, when I insert a blank dvd in the drive, the computer does not recognize that everything is there.

  As I said, I'm not the person most computer savvy in the world.  I know how to work with my applications, but I know little about the way in which a computer is set up, so I apologize in advance if my question is ignorant, but I appreciate any help you can give.  Thank you in advance.

  
  

• StageVideo does not play content downloaded, but will play the included content. (iOS)

  Hi all

  I'm working on an application and try to use StageVideo and I came across a problem.

  I would like the app to be able to play H.264 videos on iOS.

  The video content to be played will be downloaded by the app from our server to the device.

  I ran my code under windows and android (specifically a xoom) and it works, so I know that the files are downloaded and paths are correct. However, when you run the code on iOS I was not see any video or hear all the sounds.

  I then tried including the video file when making the ipa and play from the included location and he play with sound and video.

  Can anyone think of a reason the video file will not play if it is downloaded as opposed to being included with the application?

  Including files video isn't an option because they change regularly, so need to be downloaded.

  Thank you

  Chris

  P.S. I post code if you need it, but I followed a little this code:

  http://forums.Adobe.com/message/4352118

  who is responsible in a view empty.

  Thanks for your help.

  I got it to work. My problem was that the app was the creation of the local file using our address of the server, for example ' video/1100', what I knew was a video, so I would spend it in the StageVideo who don't know what to do with it. The solution was to add ".mp4" at the end of the location of the file for example "video/1100.mp4" so that StageVideo could open.

  When I got it with the app, I was using the original file named "example.mp4", so he was not having this problem.

  By the way, I ended up going with StageWebView for my solution, because it is easier to design my app round have a video in the forground to require a gap by everthing in the background.

  (StageWebView also has the problem that I found above where it takes a file extension to play).

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• Stop going to the framework, but does not stop

  I make a slide show that takes a break on each slide for 10 seconds, and there is also navigation buttons to each slide regardless. I have this code (I killed the interwebs) in a layer of separate actions to interrupt the slide show, independent of any button action. This, for example, is an action on the frame 2:

  Stop();

  var nInterval = setInterval (Play, 10000);

  function Play() {}
  clearInterval (nInterval);
  gotoAndPlay (_currentframe + 1);
  }

  The buttons use this script:

  On (Release) {gotoAndStop (1) ;}}

  The code to pause was substitution action of the 'stop' button when I have to go to the same frame: gotoAndStop (2). So I created a double frame (frame 1) before the script break and said the button to go: gotoAndStop (1). Since there is no action on this image, I thought that the stop action would work normally, but when I click on the button, it goes to the frame (frame 1) but the film continues to play after 10 seconds, instead of stop.

  I explained probably terribly, but I'm just trying to understand why Stop does not stop when it is sent to an empty picture frame. Thank you!

  Yes, I'm not sure that I follow the explanation, but one thing that could be the cause of the problem is that the setInterval can be in still game while you head back to frame 1, then when it times out it will go on everytime.  You will need your use of the compensation button as the interval.

  If your trip to ttimeline is to move mainly to next and previous images, you might want to try to use nextFrame() and prevFrame() instead of gotoandWhatever.  Their duty in life is to move to the next or previous frame and stop.  It could allow you to not have to encode each image and could allow you the use of a single button instead of one for each image.

• my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

  my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

  Hi dove2k,

   

  Welcome to Microsoft Answers Forums.

  You will need to enable the touchpad on the laptop itself.

  Find the area of the touch pad, you will find a button to enable or disable the touchpad.

  If the step above doesn't, try this step.

  Go to control panel > mouse > device settings tab
  Click (or to disable)

  

  Notes:
  On some models, there is a keyboard shortcut to enable or disable the touchpad. For example, ACER, just do Fn + F7.
  You can click on Reset device if none of these solutions work.

  If you still can't touch pad to work, you will need to contact the manufacturer of the laptop computer for more information.

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer does not stop the on-screen keyboard. It is whenever I log on my profile and will not stop. How do I stop?

  computer does not stop the on-screen keyboard.

  http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

  Read the tutorial above.

  You can prevent the Visual keyboard facilitated access to automatically
  When you load Windows by disabling "use on-screen Keyboard.
  checkbox on the page "Use the computer without a mouse or keyboard" in the
  Ease of access Center.

  Open Control Panel > accessibility > Ease of Access Center > use the computer without a mouse or keyboard.

  See you soon.

  Mick Murphy - Microsoft partner

• 098sa Pavilion: Pavilion 098sa does not stop

  Hi, I would be very grateful if someone could help me, it drives me crazy!

  Because my computer has been updated for Windows 10, my computer does not stop. Screen turns off, but it will not be closed, if I press and hold the button for a few seconds.

  No idea how I can solve this problem?

  Thank you in advance!

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close windows open and stop the laptop by right clicking on the icon in Start Menu, select (Admin) command prompt and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• Called vi with one hand, it does not stop

  Hi all

  I try to call a vi of a principal, I have succedded to call the vi but I couldn't stop the main vi and the called vi does not stop and disappear. Where I did wrong?

  LabVIEW follows a model of data flow for execution of vis a block diagram node runs when it receives all the required inputs. When a node is running, it produces output data and transmits data to the next node in the path of the data stream. The flow of data on the nodes determines the order of execution of the VIs and functions on the block diagram. Source

  Once you have called your Subvi, your main VI is pending so that it ends before it can move to the next State in the state machine which is the reason why it will not stop.  If you want to run a separate VI, you can call an asynchronous mode

• Why the STOP button does not stop this vi?

  Hello

  I took an example of Labview 2011 called "soul hollow period-Low Freq 1 Ctr.vi. This example vi measures one period, but, I want to measure the period over and over again, so I put it in a WHILE loop, but the STOP button does not stop at the vi.  Instead, I have to use ABORT to stop the vi...

  How can I stop this vi?

  Dave

  It does not replace the time-out.  The while loop is a separate beast from the meter reading.  You wouldn't want your loop due to always make you miss the error messages, would you?

  Usually just clear the error message of time-out on the counters.

  You get the message twice because the loop runs in fact twice.  The first time the stop button is read as false as soon as the loop begins.  Then you click on it.  At the same time that it takes 10 seconds for the timeout counter to occur - when he does it gives you the error.  Then, the loop runs again.  This time it reads the key stop as true, because you clicked on it during the timeout of 10 seconds of the last loop.

  A time loop allows everything inside to complete execution before the end, then you will have to wait for an another timeout of 10 seconds to occur which produces another error.

  Unless you need a measure of very, very low frequencies I set your time-out to a more reasonable number and simply erase the mistake if it matches 200474.

• October 2014 GI OJVM PSU Combo - 'auto opatch apply' t - it does not stop instances DB?

  October 2014 GI OJVM PSU Combo - 'auto opatch apply' t - it does not stop instances DB?

  () 19791428 fix / p19791428)

  
  

  Our process for patching Oracle 11.2.0.3 GI has not changed for many patch cycles. But I have a few questions about the PSU process October 2014 "Combo" GI which includes OJVM. We will test on the instances of laboratory first, but I wanted to see if somebody beat us to the application of this power supply and can share an overview.

  Our environment:

  Oracle grid Infrastructure 11.2.0.3.11 (no CARS; used only for ASM / Oracle Restart)

  11.2.0.3 multiple databases of instances per unique host (Redhat Linux x 86-64)

  We always manually stop EM agents then changed directory to the level root the dir containing the decompressed PSU and run opatch auto - and run as root, if system administrators grant us temp privs root on a given day. Then:

  opatch auto/home/oracle/patches ocmrf - /u01/app/11.2.0/grid3/OPatch/ocm/bin/ocm.rsp

  For post-install, restrict us the stopping, starting, run catbundle.sql, and then 'change the system disable restricted session.

  Fast forward to October 2014 GI Combo PSU just released, README Section 'Installation of the patch 2.4.

  Step 1: bring down the database on all nodes using the "svrctl stop database...". ». First of all, we will never that. What is a RAC only step? "opatch auto" always stop all Oracle services necessary for us, with the exception noted above, agent of the EM. Don't skip us this step for a GI but not RAC configuration? Again, we use only of GI for ASM.

  Step 2: cd in a patch numbered directory (in this case, < patch Home > / 19791428). A bit different than before, but not confusing not.

  Step 3: opatch auto apply - ocmrf < com answer file full path >.

  Significant for adding 'applies' here in auto opatch syntax? Maybe it was always there, for example July 2014 patch cycle, and I never noticed...

  Step 4: cd to a subdirectory of the directory of numbered, for example < patch Home > patch/19791428/19282015

  Step 5: patch OJVM apply:

  opatch apply - local

  "Affixes Opatch - local" also run as root?

  Step 6: repeat step 2 to 5 on all nodes; Since we GI but no CARS, so there are no other nodes.

  Step 7: the last node, elevate dbs on all nodes via 'svrctl start the database '. Believe that we would skip because we are not CARS.

  Go to Section 2.5.2: loading modified the SQL files in the database

  1. start each instance then run @postinstall.sql - what is new. It seems also new on him must START each instance. In our last round patch "opatch auto" always showed all Oracle services, including any proceedings. So before our catbundle.sql, we run generally restrict us the stop and then start. "Opatch" behave differently for for example not restart us during this cycle of fix, all Oracle services when you are finished?

  2. run catbundle.sql for each instance; par for the course.

  Thank you.

  Dana

  
  

  I made the correction today. The statement does not.

  as root, do 1,2,3

  as oracle do the rest.

  should be automatic without apply.

  hope this helps.

  HP

• Database does not stop

  Hello
  10g R2 on win 2003 server, I issued
  
  STOP IMMEDIATELY,
  but it does not stop and Alertlog I:

  Job queue slave processes stopped
  All dispatchers and shared servers shutdown
  Mon Apr 19 13:33:45 2010
  ALTER DATABASE CLOSE NORMAL
  Mon Apr 19 13:37:09 2010
  Thread 1 advanced to log sequence 5316
    Current log# 6 seq# 5316 mem# 0: D:\BASE\MYDB\UNDO\REDO06.LOG
  Mon Apr 19 13:38:47 2010
  Waiting for smon to disable tx recovery.
  Mon Apr 19 14:18:21 2010
  Thread 1 advanced to log sequence 5317
    Current log# 4 seq# 5317 mem# 0: D:\BASE\MYDB\UNDO\REDO04.LOG
  Mon Apr 19 14:43:57 2010
  Thread 1 advanced to log sequence 5318
    Current log# 5 seq# 5318 mem# 0: D:\BASE\MYDB\UNDO\REDO05.LOG
  Mon Apr 19 14:59:22 2010
  Thread 1 advanced to log sequence 5319
    Current log# 6 seq# 5319 mem# 0: D:\BASE\MYDB\UNDO\REDO06.LOG
  Mon Apr 19 15:16:56 2010
  Thread 1 advanced to log sequence 5320
    Current log# 4 seq# 5320 mem# 0: D:\BASE\MYDB\UNDO\REDO04.LOG
  Mon Apr 19 15:33:31 2010
  Thread 1 advanced to log sequence 5321
    Current log# 5 seq# 5321 mem# 0: D:\BASE\MYDB\UNDO\REDO05.LOG
  Mon Apr 19 15:50:13 2010
  Thread 1 advanced to log sequence 5322
    Current log# 6 seq# 5322 mem# 0: D:\BASE\MYDB\UNDO\REDO06.LOG

  What's your idea?
  
  How can I stop it?
  
  
  I can not connect:
  

  D:\>sqlplus sys@MYDB as sysdba
  
  SQL*Plus: Release 10.2.0.1.0 - Production on Mon Apr 19 16:06:29 2010
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Enter password:
  ERROR:
  ORA-12518: TNS:listener could not hand off client connection

  Thank you.

  Stop immediately stop new connections to the database, new transactions, disconnects the non current sessions and restores all existing transactions. The key here, seems to be rolling back existing transactions. It may take some time if there was any significant transaction or long term to cancel. What you can do, before issuing a judgment, is to check v$ transaction column used_ublk to see if there is a session using a large number of undo blocks. The blocks to cancel more in use, the longest closure will be.

• Web site does not work in FF but works in Chrome and IE

  No idea why this map of sin does not appear in FF but works in IE and Chrome?

  https://TPWD.Texas.gov/fishboat/fish/programs/gofishing/santoniofish/satx_map.phtml

  You will notice that there a shield icon on left (globe/lock) "Site identity button" on the address bar to indicate that the mixed active content is blocked.

  • https://support.Mozilla.org/KB/how-does-content-isn ' t-fix-affect-my-security
  • https://developer.Mozilla.org/security/MixedContent

  There is also an error in the Web Console (Firefox/tools > Web Developer).

  Blocked active content mixed loading"http://maps.googleapis.com/maps/api/js?key=AIzaSyDfhSEgHCTbghyruX1xpH26tysiRJI78og & sensor = false' [more]

  You need to change the HTTPS URL or leave out the Protocol:

  <script type="text/javascript"
      src="//maps.googleapis.com/maps/api/js?key=AIzaSyDfhSEgHCTbghyruX1xpH26tysiRJI78og&sensor=false">
  </script>
  

• Satellite A500D - fan does not stop

  Hello

  Two days ago I updated the Bios to version 1.20 win, and since then, the fan is constantly at 72% and the temperature of the CPU at 36 º.

  At Toshiba, I say it is normal, but the fan does not stop at any time and the noise is annoying.

  Anteriormento updated the BIOS, the fan stopped and started and never surpassed 54%.

  Looks like a vergueza by the care service, they have given me, I tried to deceive, as is normal for a portable fan that keeps 72%.

  Please I need someone to tell me where I can download before my Bios and how to install it.

  PS: My processor ens Turion Rm-77.

  A welcome message

  Hello

  You mean the cooling module fan didn't run all the time with the previous BIOS version?

  Well, in this case you must downgrade BIOS to the previous version.
  The problem is that you can download the latest version of the BIOS from the Toshiba page.

  But maybe a Toshiba ASP might help you and may downgrade the BIOS to the previous version

  But have you tried to change the settings in Win 7 power option?
  You can find it in the control panel-> power options

  There you can change modes of single power supply.
  In the power settings advanced, you'll find settings Toshiba energy saver and there you can change the method of cooling while the laptop is running on battery or power.