Stop going to the framework, but does not stop

Similar Questions

• Re: Deskjet 3070 - replaced the cartridges but does not now print!

  I have the same problem with my printer Officejet 6700 Premium. I just replaced all the cartridges with HP new ones. The printer is now going through the motions but does not print blank pages. This happens for all what I am trying to print including Diagnostics pages. The printer is a little older a year is not under warranty. Any help would be greatly appreciated!

  Hello twoshirts,

  I saw your other threads, and I understand that you have completed all the procedures listed here troubleshooting: printer does not print black ink or color of ink or prints blank Pages without success.

  I would like you to follow the steps below:

  1. reset of the printer, please make sure that you plug the printer directly into the wall, do not use a surge protector or power bar, they can cause the printer is in an error state and lose features of base over time.

  2 a 'cartridge problem', "Ink cartridge failed" or not "compatible ink cartridges" Error Message appears on the all-in-one, I know you did the cleaning steps, but, if you please, reinstall the cartridges and perform all THE steps listed

  3. now go ahead and run HP print and Scan Doctor- it has been designed to provide users with HP and features troubleshooting fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  I understand that you are not able to print diagnostics from the menu on the front panel as well, but want to see if the PSDR detects all conflicts in the software or drivers.

  Please let me know the results.

  Thank you

• Fire fox is slow and on a single website, it goes on the site but will not load the page

  Fire fox is slow. Also on a single Fire fox web site goes on the website but will not load the page
  Questions began Tuesday, June 16, 14. Website can be opened with other browsers.
  I am running windows XP sp2

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart

• CD/DVD is recognized by the computer, but does not

  My CD/DVD is recognized by the computer, but does not... tried fix it did not help

  My CD/DVD drive has stopped working.  My computer recognizes the drive but when I put a disk in it cannot read.  I tried multiple disks, but nothing will work.  I tried microsoft fixit, but it does not work.  He said that the media cd/DVD drive is not readable.  Help, please.

  Is that your CD/DVD drive is older than 1 year?  Then, the drive may be defective, with a faulty lens.

  I don't think that any form of manual registry change or fix tool will work in the situation.
  S.Chatterjee

• my flash reads the xml, but does not include the php tag...

  my flash reads the xml, but does not include the tag php. I want to read my xml dynamically, Please help me.

  Code:

  Stop();

  function randomOrder (targetArray)

  {

  var _loc2 = targetArray.length;

  var _loc3 = [];

  for (var _loc1 = 0; _loc1 < _loc2; ++ _loc1)

  {

  _loc3 [_loc1] = _loc1;

  } / / end of for

  var _loc4 = [];

  for (var _loc1 = 0; _loc1 < _loc2; ++ _loc1)

  {

  _loc4 [_loc1] _loc3.splice = (Math.floor (Math.random () * _loc3.length), 1);

  } / / end of for

  var _loc5 = [];

  for (var _loc1 = 0; _loc1 < _loc2; ++ _loc1)

  {

  _loc5 [_loc1] = targetArray [_loc4 [_loc1]];

  } / / end of for

  return (_loc5);

  } / / End of the function

  var randomNUM = '? '. n ="+ random (9999);

  _root. LAN = 1;

  var homehead;

  HomeLink var;

  var homelinkwindow;

  var homebg;

  var homeflash;

  lamp var = Array();

  promo var = Array();

  var promobottom = Array();

  var headimg = Array();

  f_xmlwork2 = new XML();

  f_xmlwork2.ignoreWhite = true;

  f_xmlwork2. Load ("banner.php");

  f_xmlwork2. OnLoad = {function (success)}

  If (success) {}

  trace ("XML loaded!');

  f_xmlItemx2 = parseInt(this.firstChild.childNodes[0].firstChild);

  f_totalx2 = f_xmlItemx2.length;

  trace (f_totalx2);

  var _loc12 = 0;

  declarar a fundo imagem

  homebg = this.firstChild.childNodes [0].firstChild.nodeValue;

  f_headimg = this.childNodes [1];

  for (var _loc2 = 0; _loc2 < f_headimg.childNodes.length; ++ _loc2) {}

  Juju = f_headimg.childNodes [_loc2];

  JJ = headimg.push ({headimg: f_headimg.childNodes [_loc2].attributes.headimg, bgimg: f_headimg.childNodes [_loc2].attributes.bgimg, msgimg: f_headimg.childNodes [_loc2].attributes.msgimg, leftthrow: f_headimg.childNodes [_loc2].attributes.leftthrow, rightthrow: f_headimg.childNodes [_loc2].attributes.rightthrow});

  }

  end for

  allpromo = this.childNodes [2];

  jjpromo = allpromo.childNodes;

  for (var _loc2 = 0; _loc2 < allpromo.childNodes.length; ++ _loc2)

  {

  trace (jjpromo, [_loc2],.attributes.title);

  JJ = promo.push ({img:. attributes.img jjpromo [_loc2], title: jjpromo [_loc2].attributes.title, url: jjpromo [_loc2].attributes.url, window: jjpromo [_loc2].attributes.window, info: jjpromo [_loc2] Sublst.ChildNodes(1).ChildNodes(0) [0] .nodeValue});

  }

  end of for

  allpromobottom = this.childNodes [3];

  jjpromobottom = allpromobottom.childNodes;

  for (var _loc2 = 0; _loc2 < allpromobottom.childNodes.length; ++ _loc2)

  {

  trace (jjpromo, [_loc2],.attributes.title);

  JJ = promobottom.push ({url: jjpromobottom [_loc2].attributes.url, window: jjpromobottom [_loc2].attributes.window, info: jjpromobottom [_loc2] Sublst.ChildNodes(1).ChildNodes(0) [0] .nodeValue});

  } / / end of for

  If (f_xmlwork2.loaded is true)

  {

  headimg = randomOrder (headimg);

  for (var _loc2 = 0; _loc2 < f_headimg.childNodes.length; ++ _loc2)

  {

  trace (headimg, [_loc2], .headimg);

  } / / end of for

  play ();

  } / / end if

  }

  }

  trace (f_xmlwork2);

  Stop();

  PHP code:

  <?

  $link = mysql_connect("localhost","rnpac_eco","123");

  @mysql_select_db ("rnpac");

  $dir = "' banner /"; "

  Dir1 $= "" products/img_pro / ";"

  Dir2 $= "" universo/activities / ";"

  $sql = ' SELECT tbl_produto.id_produto, tbl_produto.produto, tbl_produto.legenda, tbl_produto.detalhe, tbl_produto.preco, tbl_produto.produto_cat_id, tbl_detalhe_produto.proprietario, tbl_detalhe_produto.local, tbl_detalhe_produto.qualidade, tbl_detalhe_produto.alcool, tbl_detalhe_produto.acidez, tbl_detalhe_produto.ph, tbl_detalhe_produto.informacao, tbl_detalhe_produto.gestor, tbl_detalhe_produto.condicionamento, tbl_detalhe_produto.detalhe_t, tbl_detalhe_produto.interesse, tbl_detalhe_produto.transporte, tbl_detalhe_produto.produto_id, tbl_imagem_produto.id_imagem tbl_imagem_produto.imagem1, tbl_imagem_produto.imagem2, tbl_imagem_produto.imagem3, tbl_imagem_produto.imagem4, tbl_imagem_produto.imagem5, tbl_imagem_produto.imagem6

  OF tbl_cat_produto, tbl_produto, tbl_detalhe_produto, tbl_imagem_produto WHERE tbl_produto.id_produto = tbl_detalhe_produto.produto_id AND tbl_produto.id_produto = tbl_imagem_produto.produto_id ORDER OF RAND()';

  $resultado = mysql_query ($sql)

  or die ("Nao faith possible realize a consulta.');

  $row1 = mysql_fetch_array ($resultado);

  $sql = "SELECT tbl_sub_universo.id_subuniverso, tbl_sub_universo.subuniverso, tbl_sub_universo.universo_id, tbl_actividade.id_actividade, tbl_actividade.entidade, tbl_actividade.legenda, tbl_actividade.subuniverso_id, tbl_actividade.det, tbl_actividade.preco, tbl_actividade.data, tbl_detalhe_actividade.actividade_id, tbl_detalhe_actividade.periodo, tbl_detalhe_actividade.descricao, tbl_detalhe_actividade.programa, tbl_detalhe_actividade.informacoes, tbl_detalhe_actividade.actividades, tbl_detalhe_actividade.localizacao, tbl_detalhe_actividade.locais, tbl_detalhe_actividade.servicos, tbl_imagem_produto.id_imagem. tbl_imagem_produto.imagem1, tbl_imagem_produto.imagem2, tbl_imagem_produto.imagem3, tbl_imagem_produto.imagem4, tbl_imagem_produto.imagem5, tbl_imagem_produto.imagem6, tbl_sub_universo tbl_imagem_produto.actividade_id, tbl_actividade, tbl_detalhe_actividade, tbl_imagem_produto WHERE the tbl_actividade.id_actividade = tbl_imagem_produto.actividade_id AND tbl_actividade.id_actividade = tbl_detalhe_actividade.actividade_id ORDER OF RAND() ';

  $resultado = mysql_query ($sql)

  or die ("Nao faith possible realize a consulta.');

  $row2 = mysql_fetch_array ($resultado);

  ' $query ='SELECT * FROM tbl_banner ORDER OF RAND() ';

  $resultado = mysql_query ($query);

  echo "<?" XML version=\"1.0\"? " >

  < home_left_headline >

  < bgimg > '. $dir2. ". $row1 ['imagem1'].' < / bgimg >

  < / home_left_headline >

  < home_flash > ';

  While ($row = {mysql_fetch_array ($resultado))}

  "" echo "< swf headimg =" ' bgimg = "" msgimg = "" leftthrow = "" rightthrow = "" > < / swf > '; "

  }

  echo "< / home_flash > ';"

  echo "< promotop >

  "< img class =" "title =" "" url = "" > <! " [CDATA []] > < / promo >

  "< img class =" "title =" "" url = "" > <! " [CDATA []] > < / promo >

  < / promotop > ';

  mysql_close ($Link);

  you would not see this trace php if your php has been setup correctly.  Upload your files and repeat the test.

• Skype is running in the background, but does not open on the screen

  Skype is running in the background, but does not open on the screen

  Uninstall ArcSoft software. This application adds a filter cell of webcam and is originally Skype crashing.

  Stack: \Driver\,ArcSoftKsUFilter, \Driver\ksthunk,\Driver\usbvideo,\Driver\usbccgp

• Microsoft Challenge appears on the taskbar, but does not open

  Original title:

  Collection of Microsoft

  My wife and I want to do the daily challenge of the Microsoft Collection and being close to the end of the month we are both very happy that we have succeeded so far.

  Unfortunately today, I did my challenges but Microsoft Challenge of my good lady appears on the taskbar, but does not p [facilitated someone can help fix this problem because as at the moment it's my fault :) :)]

  Thank you

  Hello

  Uninstalled and reinstalled then and he SAVED so it was all good in the end THANK YOU all our data

• I have already uninstall the program but does not control panal icon

  I have already uninstall the program but does not control panal icon

  Hello

  Thanks for posting the request in the Microsoft community!
  Before troubleshooting, provide us with information.

  1 are. what program you referring?
  2. you receive an error message on the computer?

  You can try the solutions and check if the icons are removed from the control panel.

  Method 1:

  Run the fix it and check.
  http://support.Microsoft.com/mats/program_install_and_uninstall/

  Method 2:
  This could also be a problem with the virus. You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Method 3:

  If the previous step fails, check if it has all the facilities waiting on the computer using the registry.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Empty registry key "InProgress".

  Check the following registry key:

  HKLM\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress

  Empty/rename "PendingFileRenameOperations" registry key

  Check the following registry key:

  HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations

  Just reply with the results. I'd be happy to help you more

• Sliders on my muse adobe site are visible when I discovered the site in the browser within the program, but does not show up on published site

  Sliders on my muse adobe site are visible when I discovered the site in the browser within the program, but does not show up on the published site.

  explorersglobalfineart.com

  How can I rectify this?

  Thank you

  A large number of files in your site seems not to be on the server. If you use file > upload to FTP host, please repeat the process and select Download all files. If you use file > export as HTML and download with an FTP external program, please repeat the export process in an EMPTY FOLDER and then download everything that has been exported to your server.

• XI (11.0.09) drive sometimes starts the process but does not appear in applications or open on desktop

  On windows 7 64 bit. Sometimes reader XI (11.0.09) begins the process but does not appear in the applications. In this case however the application is started for example start menu, double-click on pdf, double-click AcroRd32.exe. He

  11.0.09 is put on hold for us - supported by 11.0.08 solves the problem

• Why won't my Windows Media Player rip the CD more? Play selections from the library, but does not recognize the CD in the drive to rip.

  Help, please! I've been rip CDs to the library and everything was fine. Then I put a cd in and I could hear this spin and charge but then... nothing. He said "not responding" in the taskbar above, next to windows media player.
  I closed and reopened it. Different CD. Same thing. I restarted the computer. Once again, an another CD.but the same thing.
  It plays all the songs that are in my library but when I'm in the "rip" tab, there is a message saying to start, "insert a CD into the CD drive. I do and as before, I can hear it spin and charge, but the window of windows media player does not recognize that there is a CD in the drive. In the upper right corner is corner it say 'disc (E)' is this a hardware problem or software? Please help me to solve it!

  http://support.Microsoft.com/GP/mats#tab2
   
  Has a troubleshooting guide automated for you.
   
  --
  ..
  --
  "dee4156" wrote in message news: bc5b21d1-9fa9-48f9-a84a-eb439997ea79...
  > Please help! I've been rip CDs to the library and everything was fine.
  > Then I put a cd in and I could hear this spin and charge but then... nothing.
  > In the taskbar above, he said "no answer" next to windows media
  > player.
  > I closed and reopened it. Different CD. Same thing. I restarted the
  > computer. Once again, an another CD.but the same thing.
  > It plays all the songs that are in my library but when I'm in the "rip".
  > tab, there is a message saying to start, "insert a CD into the CD drive.
  > I do and as before, I can hear it spin and charge but windows support
  > the player window does not recognize that there is a CD in the drive. In the
  > top right corner, it says 'No disc (E)' is this a software or
  > hardware problem? Please help me to solve it!
   
   

• 8600 visible on the network, but does not print wireless

  I can see the 8600 on my airport network, but does not display the work sent wireless (no error msg, stay in the queue). To print correctly if the USB cable is connected. Also see a separate network of 8600, but do not have a WEP key for it and don't see how to create one, so it won't let me join this network. Don't see any info on this in your pages and support forums.

  It was a very good question. I looked at my list of printer and there are 2 8600 s that are listed.  I think we could be active when the printer is connected via the cable and one for when it is wireless. I went by default and had no trouble in a wireless printing sheet.  It is probably a mistake on my part of the user, but I don't remember adding a second printer in the menu printing. I'll play around with it and remove an if it is not necessary. Thanks for your help.

• I can't launch the programs installed on my pc! He goes to the downloads, but them not working please help

  I have flight games installed on my pc, I've played. Now when I try to open them, it goes to my downloads; and the download page does not open them. What happens with that. I am running windows 7 ultimate and programs still open to the top of my desk. now, he goes to the downloads and don't open them! I can't even use System Restore as the download page does not recognize the editor. It does not recognize any editor even microsoft.

  I have flight games installed on my pc, I've played. Now when I try to open them, it goes to my downloads; and the download page does not open them. What happens with that. I am running windows 7 ultimate and programs still open to the top of my desk. now, he goes to the downloads and don't open them! I can't even use System Restore as the download page does not recognize the editor. It does not recognize any editor even microsoft.

  using the analysis

  http://www.Malwarebytes.org/ (recommended)

  If you have anti antivirus program update it and run full scan or if you do not get this one:
  AVG Free http://www.avg.com/gb-en/download-free-anti-virus

  Do using the analysis:

  http://www.emsisoft.com/en/software/EEK/ recommended

  You can run it from memory stick too.

  It is recommended to perform all analysis in safe mode.

  Make sure your system is clean first. use ccleaner to get rid of junkfiles http://www.piriform.com/ccleaner/download

  Make sure your windows is uptodate and drivers work correctly and that they are as uptodate.

  Try to clean boot to see which program is causing the problem

  Statement from here

  http://support.Microsoft.com/kb/310353

  Test your windows files

  http://www.bleepingcomputer.com/forums/topic43051.html

  Uninstall programs you don't use or you have installed recently and ut caused the problem

  Please visit my blog for more tips and tricks
  http://safewordwidewebsurfing.blogspot.co.UK/

• Creative cloud runs in the background, but does not open

  I have many many problems with this terrible software.  No two days the same thing.  Today, that it does not open. It shows as running in the Task Manager. but does not open. I have deleted using the Task Manager and tried again, but it still fails to open. I am close to deletion and return to the stand-alone version. This is ridiculous. Anyone can help?

  Hi Andy,.

  We apologize for the inconvenience caused to you. Please end task associated Adobe all the processes that are creative Cloud, CoreSync, CCLibrary, CCXProcess, Adobe CEF Helper, Office of Adobe, Adobe IPC broker, Adobe Crash demon from the Task Manager. Then, start Creative Cloud Desktop Application and then connect you.

  It could be useful!

  Kind regards

  Shelly

• printer prints from the internet but does not print the document files

  My photosmart Hp 6510 series prints from the internet, but do not print documents saved in my Toshiba computer files. He did print before files. What should I do? This message has been incorrectly marked as the solution

  Are you connected via USB or you print wirelessly?

  I've included a few scareen shots below the best way to go about printing a word document. The icon of the file clicked at the top left, click on print and follow the screenshots below.

  Make sure the printer name is identical to the one that you want to print to. older printers may appear in the window also so do of course have chosen the right one.