PC is a job really bad (window 7)

Similar Questions

• After that installation of windows live my computer slowed down really bad

  After I installed windows live my computer at startup slowed down really bad and it is very slow, whenever I click on to go to other applications. are there Add-ons I can delete to speed up my laptop?

  Hi ellajones,

  1. you receive an error message when you try to open programs on the computer?

  2. do you have security software installed on the computer?

  I suggest that you put the computer in a clean boot state and check if the problem persists.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If fails it above step then check out the link below and try the steps mentioned, check if it helps.

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

• Explorer 8 is really bad compared to 6. It hangs very, very slow loading, if cela an inprovement, then you are in trouble!

  Explorer 8 is really bad compared to 6. It CRASHES constantly, is very slow loading. If cela an inprovement, then you're in trouble. The difficulty of this piece of garbage!

  Hello goodwrench70, welcome.

  Internet Explorer 8, the conditions are correct, will run at normal speed. If the browser is slow or if it crashes, it could be a number of possibilities.

  My suggestion would be to first try and launch IE8 in no add-on mode. This will allow us to see if maybe something 3 rd-party is causing the problem.

  1. click on START
  2. click on "programs".
  3. click on "Accessories".
  4. click on "system tools."
  5. click on 'Internet Explorer 8 (no add-on).

  If the browser still runs slowly or crashes, you can place the machine in a clean boot state.

  1. click on START
  2 type "msconfig" (without the quotes) and press enter
  3. go to the "Startup" tab and uncheck all the entries displayed
  4. click on 'Apply' at the bottom right
  5 restart your computer

  If the browser still runs slowly or crashes, you can try using a different browser to see if the problem is systemic, or just with Internet Explorer. Search "Web Browser" in your search engine. There are a number available there.

  If another browser to work properly, then I suggest to uninstall and reinstall Internet Explorer 8. After the reinstallation, I go to Windows Update and download all the updates that are available for IE8.

  Link reference for the manual uninstall IE8: http://support.microsoft.com/default.aspx/kb/957700

  Hope this helps,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• VMware Player, really bad performance.

  Hello

  I'm a really bad, unusable performance with any client VMware. I've tried combinations of:

  VMware Player and VMware 10.

  XP, Win 7, Linux Mint operating systems, among others.

  All comments VM to run incredibly slow. Some of the questions include:

  Movement of the mouse very slow/lag

  Takes less than 60 seconds for firefox, or any program to open.

  When a program is open, the shift makes it just unusable.

  I tried to install the computer virtual invited to different readers, including an SSD.

  I tried the resolutions of 800 x 600 up to full screen.

  I downloaded and installed the latest VMware tools.

  I searched and tried all the possible solutions I found on google for the last 2 weeks.

  I checked the Bios to ensure that virtualization is on.

  I tried to vary the amount of Ram and CPU available on the guest virtual machine.

  Course record:

  I7 2600 k

  mem 32g

  SSD and a couple of WD black 1 TB drives

  XFX 7950 DD Black Edition

  I am at a loss. If anyone has any ideas what else I could check it would be greatly appreciated.

  Hello Weinstein and thank you for the answer.

  The host operating system uses Win 7 Ultimate 64 bit, and for the programs that are running, it may be a fresh restart with only the usual windows services.

  With respect to the way in which the guest virtual computer is configured, I tried varying amounts of ram and cpu. But as it is currently is:

  Memory 2 GB

  2 processors 'virtualization = automatic engine.

  (SCSI) hard drive 60 GB

  NIC NAT

  Any other information needed please let me know, I'd really like to get this working. I got it on my old machine, a processor AMD/MB. When I built this Intel machine he developed suddenly problems...

  Hmm, motherboard info if no help:

  ASRock Z77 Extreme 4

  Edit... After addition of the motherboard in my google search, it may possibly be a Bios problem with this motherboard. From the looks of him, I may have to go back to an older version of bios. Investigation is ongoing.

  Edit #2... After rolling back to the version of the Bios 2.5 it seems that my problems have disappeared.

  For all those who use the ASRock Extreme 4 with a processor 2600 k flash bios to version 2.5

  There are known problems using a processor 'K' with this motherboard and VT and bios versions more recent than 2.5 seem to have done even worse...

• To reset a bad windows update

  I stopped a update Windows junk 10 months ago and still get this code. Updated for Windows 10 failure error WindowsUpdate_C1900101-20003 when I go into my control panel and look for news updates for my (beloved) Windows 7. How can I erase this upward? I thank in advance.

  [Fusion]

  How to erase a bad windows update? Is there a Temp file or download that I can remove? I love Windows 7 but I have a window 10 day that I stopped and you want that he erased!

  You seem to be on W7 and tries to clear a update that maybe wanted to take you to W10.  Your question does not belong to this site, because this site makes testing beta versions of future versions of W10.

  However, if you go on the d/l from Microsoft site and search for "wushowhide.diagcab", it is a program that allows you to hide updates.  I have used in the past.  Let it run for a few moments and it can offer hide this update unnecessary and probably for an offer that is no longer valid.

  Mel

• New laptop (Dell Inspiron 14 5000 series) with really bad internet

  Hi, I bought a couple of new portable weeks. the laptop as you can tell by the title is a dell inspiron 14 5000 series. It includes the pilot is an Intel processor dual band wireless - 3160 AC. The problem I have is that the internet is very slow. I get 1 Mbps when I'm in my room, but when I stand right next to the router, I get my normal Mbps which is 20 Mbps. I did some research on the resolution of this issue and the most common responses I got of to get a wired connection (if I do that, I might as well have a pc) and download the new driver (2 x 2). I also changed my HT Mode for people with reduced mobility that works, but the internet connection is really bad (5 Mbps). Now my action is to obtain a new driver, but just to be sure there is a way to fix my internet connection?

  I know this isn't the internet from the internet on the other laptops work perfectly fine. And I'll be back on the laptop but unfortunately my 2 weeks are up.

  Return the machine if you can.

  The problem you are having is a common feature of this series of machines from Dell. Dell staff does not recognize the problem and no solution is guaranteed. Just search the forum for yourself.

  Example:

  http://en.community.Dell.com/support-forums/network-Internet-wireless/f/3324/t/19589278?pi239031352=1

• How to do old msn homepage back, the news is really bad!

  How can I get the old msn home page, the news is really bad!

  Because MSN decided to change their layout throughout the site, I'm afraid that it is not possible get the old back without MSN returning to their site at the former route, and I doubt it will happen.

• Photomerge works do not cc2014. By aligning the works but really bad mixture. works very well in cc

  Photomerge works do not cc2014. By aligning the works but really bad mixture. works very well in cc

  After resetting the preferences in cc default 2014 seems to work better.

• Moored W510 has really bad update video internal display

  I noticed that when I anchor my w510 in my dock, updates on the internal display is terribly slow.

  What I mean is that scrolling in applications is very choppy and rough.

  Play videos full screen creates 'split-screen' effect where the Summit of the half is out of sync with the bottom half, this separation is not constant, different media are the divider at different locations. several media have it in about 1/3 from the top.

  This is also apparent in other applications like games full screen.

  I did some research on the internet about this behavior and have not yet found a good explanation.

  First I thought it was something power, I have no 135W power, and I checked the CPU is without limitation down or something unusual rooted or not anchored. I read people have bad experience with the power of 90W with limitation or simply bad terrible performance of the CPU down.

  The really strange thing is that as soon as I unplug the computer from the dock, this behavior disappears!

  The laptop running on battery or external power gives me about this problem.

  I also tried to fix an external display directly on laptop or docking station, and I see no problem on external display.

  When you use external display with docking station, the internal screen is still having the problem, while at the same time the external display shows no problem, regardless of the configuration of extended screen or mirror.

  Computer running Windows 7 x 64 with Sp1.

  Alll drivers are updated through system update.

  An update, I used the updated system drivers, I tried today to download the NVidia driver, so I installed their Quadro Mobile 305.93 driver, and the problem seems to have disappeared!

  It's looking good, but I need more than 15 minutes of testing applications scrollng, videos full screen, etc, to make sure that the problem is solved.

• How to really disable Windows 7 updates

  In Windows 7, my Outlook stops working every time the computer updates. I tried to reinstall Outlook, nothing helps. Then I disabled updates. Annoyingly, although updates are completely disabled, my computer still updates frequently, and I now restore the system to 2 - 3 times a week just to be able to use Outlook.

  I would like to know if there is a way to disable really all the updates in Windows 7.

  Also, if anyone else knows Outlook failures with updates, is there a solution?

  Bubbaloop,
  I agree with Palcouk and think there is something more grand underway.  The first thing you should look into is the possibility of infection virus\malware.  Take a look at these items for some great information:

  Get rid of malware

  Can I clean an already infected computer?

  Windows Live OneCare Safety Scanner Windows 7\Vista

  If you determine that it is there were\are no infection I would say running the following tools:
  Disk error checking

  System File Checker

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it REALLY bad and memory expansion question

  Hello! Can I buy a 4 GB Fuze + and add a 32 GB card, right? I figured, but then saw a YouTube video where the guy says 'up to 16 GB".

  Also - is that REALLY that bad player? It seems that people either love or hate... some reviews most recent seem to say that with the firmware updates, it is now well. But it's just very confused with the conflicting feelings...

  The rocket + is compatible with microSDHC up to 32 GB full.

  As a player, the rocket more is a decent machine with a different processor compared the Clip + and Clip Zip; He uses the device of Freescale. As such, it works a little differently.

  I love its unique characteristics. It's great for photos and video, because it displays the images and video with a minimum of fuss. For podcasts and audio books, I really like its reading speed variable-it corrects the pitch, a feature others do not have.

  The biggest difference is his tiny Synaptics touchpad, the source of most of the user problems, especially if you use the player on the go, since you cannot operate the control without looking at the player. Volume control using dedicated buttons, however.

  The camera takes a little more time to update its database of music, so if you have decided to store a very large collection, especially with 32 GB cards available, this can be a problem. The rocket + handles the database of music unlike his sister of the players file.

  Overall, this is a really nice player, and its sound is clean, indeed, on par with models of Clip for sure.

  Bob

• Want dv 7 laptop: malfunction job with 10 Windows cursor

  Hello

  I recently loaded Windows 10, and installed.

  Everything works apparently normally, except the use of mouse cursor blinking without stop, with the small blue circle, which gene significantly: seizures and various controls. No I don't know what to do. Can someone really nice - it me pour Advisor on how correct this malfunction

  Thank you

  Thank you for visiting our English HP Support Forum. We are only able to respond to messages written in English. To ensure a fast response, it would be desirable to ask your question in English. The following links are here to help you if you want to post the following language Forum.

  German: HP Kundenforum
  Spanish: Foro of HP users
  French: Forum users
  Portuguese: Forum back HP users
  Chinese: 惠普个人客户支持论坛
  Korean: HP 지식커뮤니티

  Thanks for your understanding

  Duane_D

• How to remove a bad Windows 7 from the startup folder.

  I have a new computer with a version of OEM Windows 7 installed.  Recently, the computer restarted itself and now I am asked to select one of the two instances of Windows 7 to boot from.  The first selection of Windows 7 is one that works while the second is bad.

  How can I remove the second selection?

  Thank you

  John

  
  

  Yes, it but is somewhat limited, I have use Ghost (you would need to buy - see below) or Acronis True Image. My preference is ghost but free trial Acronis will work and there is nothing to prevent you from using Windows 7 backup system and Acronis.

  How to create a System Image in Windows 7
  http://www.howtogeek.com/HOWTO/4241/how-to-create-a-system-image-in-Windows-7/

  Create a Windows 7 system repair disc
  http://www.howtogeek.com/HOWTO/5409/create-a-system-repair-disc-in-Windows-7/

  How to restore Windows 7 from a System Image
  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup

  Norton Ghost version 15 - has a 30 day trial available
  http://www.Symantec.com/Norton/Ghost
  Media: CDR/RW, DVD + R/RW, Blu - Ray, USB and FireWire® devices (IEEE 1394), Iomega Zip® and Jaz® drives
  (Trial does not allow you to create a restore CD)
  http://www.Symantec.com/Norton/downloads/trialsoftware/register.jsp?PVID=ghost15
  User Guide: ftp://ftp.symantec.com/public/english_us_canada/products/ghost/15/manuals/ngh_15_user_guide.pdf

  Acronis True Image 2010 - has a 30 day trial version available.
  (Install Acronis and then create a restoration/Rescue CD Media before starting the creation of an image backup)
  http://www.Acronis.com/homecomputing/products/TrueImage/
  The version comparison: http://www.acronis.com/homecomputing/products/trueimage/comparison.html
  True Image Guide:
  http://S4U.download.Acronis.com/SL/oxUkMY4NOY5bRODNqa6MTQIoaAskW9VhTuYtu9h2uOM/p/PDF/TrueImage2010_UserGuide.en.PDF

  Setting the backup with Ghost or Acronis is the option (checkbox) to view and include hidden partitions. As the BCD store is a hidden "System" partition don't forget to include this as part of your backup (even though its corrupt)

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Office 2010 works both in windows 8? Is really good-Windows 8 for computers without a screen touch?

  Please help Im really confused. I upgrade to w7 Home premium/Profesional or wait for windows 8... I don't have a touchscreen pc: () BTW Ive already got w7 home base)

  If you use Windows XP or Vista, I think you will find that Windows 7 is much easier to adapt to the. Windows 8 may work on tactile material not well-founded, but its not optimized for it.

  Please, don't say things like that, Windows 8 includes the Windows desktop application that is equivalent to the performance of Windows 7, in addition to the screen start to work with a mouse and a keyboard. You can point and click as you would in a graphical user interface. In addition, it supports a variety of keyboard shortcuts. Of course, the user interface is optimized for touch, something that was missing in windows releases.

  Also if you have a lot of software (in addition to Office 2010) on your current computer may not work properly on Windows 8.

  Once again, disinformation, if its already compatible with Windows 7, it is compatible with Windows 8.

  Microsoft for Windows 7 product life cycle
  http://support.Microsoft.com/lifecycle/search/default.aspx?Alpha=Windows+7

  J W Stuart: http://www.pagestart.com

• The only way I can scrool down on a page, or a file is to enter the bar. Is this a fixable problem or I have a bad Windows 7?

  Scrool down or upwards arrows do not work as they did originally, and the bar is the only reliable way to scrool upwards or downwards. Windows 7 problems become very frustrating.

  Looks like you may have a virus or other malware. Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  -
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  -
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  -
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  -
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  `
  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and it puts regular periodic updates.
  -
  I hope this helps.  Good luck.